Installation of 8.6 and 8.6.1 8.6.4 VDM
Hello
When VDM released 8.6, the Vision Assistant has a bug of not being able to apply the filter particle visually thereon, this has been fixed by a patch 8.6.1.
Recetnly, NOR also relaeased 8.6.4 VDM that is about 500 MB. They mentioned that it does not include the patch. Meanwhile, the patch can not be applied after the installation of VDM 8.6.4 who has no Vision Assistant!
My question is, is there any package that can be installed without having to install the first VDM 8.6 (758 MB), then the patch (25 MB) and finally VDM 8.6.4 (496 MB)?
It is a painful process to restart the PC.
Thanks in advance.
Hello
As mentioned in the Readme, if you want to use the Vision Assistant with appropriate updates, you must install this in order:
"The update of the NI Vision 8.6.4 develop Module requires the NI Vision Module 8.6.0 development or the update of the develop NI Vision 8.6.1 Module to be installed.
The Vision NOR 8.6.1 Development Module update includes fixes for Vision Assistant OR are not included in the NI Vision 8.6.4 update. If you want to update NI Vision Assistant, you must install the update of the develop NI Vision 8.6.1 Module before installing the update of the Module Development NI Vision 8.6.4. »
-Zach
Tags: NI Hardware
Similar Questions
-
"Driver Installation module stopped working and was closed" error nvidia
Today I installed the version of Vista Ultimate with SP1 (PTM51E - Bios 3.60)
Since installing I can not any version of the nvidia drivers graphics card to install.
"Driver Installation Module stopped working and was closed" is the error that happens every time.
IM immensely frustrated by this
Why you post twice?
http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=114172#114172Recommended to follow only a single wire
-
I accidentally deleted the iPhoto app on my new mac after installation of El Capitan and are not available for download, except the updates, which obviously doesn't work. How can I get that back?
You can probably not - most likely, you will need to switch to Photos (what would happen sooner or later anyway)
Have you looked under purchases in the app store? Can't update iPhoto because it is not available in the App Store
If it is not there you can try reinstalling iPhoto 11 of the original source and the upgrade to 9.6.1 but I doubt it will work
Or you can try to restore your backup from just before you shape did this error
Good luck
LN
-
I need help with an installation failure to interpret and troubleshoot a Setup log.
Background: A few years ago, many editors of cinema used Final Cut Pro 6 (also contained in Final Cut Studio 2) for their editing projects. Shared Apple Final Cut X uses a different format that is not compatible with FCP6. Sometimes, these editors are called to work on a few historical projects that have been published in FCP6 and need this version to run now.
Starting with OS X Lion, FCP6 would install not in Lion and thereafter.
According research by Jeremy Johnston as noted on his blog, he discovered that Apple has inserted a file in the folder CoreServices in the Library folder of the system folder that causes versions the version Final Cut Pro X (and other older Apple programs in the same situation) do not settle. He suggested changes to this file that would seek to prevent interfering with the installation of FCP6 in Lion, many users of final cut PRO 6 were successful in their efforts to install in Lion and work with it.
Later in a discussion update on installing FCP6 in Mavericks, HawaiianHippie determined that the simplest way to perform the installation of FCP6 was simply copy this file and remove it from the system folder, install FCP6 and then restore the copied file:
https://discussions.Apple.com/message/26309669#26309669
I used this method with success to install FCS2 in Yosemite:
[click on images to enlarge]
However, in my attempts to install FCS2 in El Capitan, it fails in the last 5% to install the first DVD:
First of all, I need advice on how to display an extremely large Setup log in this thread (on MacRumors, it is a method to insert a 'code' in a small box that can be the object of a scrollbar if necessary to read all along). I am unable to find such a method to post here.
Then once approved, I need help to determine which component is causing the installation to fail and perhaps this element can be omitted from the installation:
If this element is not required, then maybe FCP6 can be installed successfully without it. And if that omitted element is necessary, perhaps a manual method to install it can be determined by pacifists.
It is my goal to help those who need to install and use FCP6 on their new Macs running El Capitan.
Here is the post on MacRumors with pre-installed Setup log:
-
Hi, I installed clean El capitan on my Mac and now I would like to create USB bootable, just in case. Should I re-download El Capitan installer from App store and move to applications. I try to write the next line: "sudo/Applications/Install\ OS\ El\ Capitan.app/Contents/Resources/createinstallmedia--volume/Volumes/NameOfYourUSB--applicationpath/Applications/Install\ OS\ El\ Capitan .app X\ X\ - nointeraction", but it says: "command not found" no idea how to do it correctly. I think I'm missing what Installer applications...
When you have completed the installation of El Capitan, the Setup program deletes itself. So if you have not copied somewhere else, you will have again the download on the App Store.
-
I can't read iphoto library stored in an external drive, after the installation of el capitan and photos, can anyone help?
What size is the drive? How are you connected to it?
-
I finished the installation of Sharepoint 2010 and went through the Setup Wizard. It is said to use the username and password you loged on the server with does not work. What should I do to access the sharepoint URL?
Hello
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en-us/sharepoint2010general/threads -
Whenever I run windows update, and try to install an update for Vista, I get the error message"
"Windows Modules Installer has stopped working and was closed"
. This has happened for quite awhile and I tried many suggestions on the web. If you do an internet search, you will see this seems to be a fairly common problem, but I can't find any official solution of Microsoft. I am afraid that I do not receive the latest updates and security patches so would like to help with this question.
Thank you
Luke
Hi guys
I had installed up-to-date antivirus software and my problem seems to start after an update from Microsoft. Do a search on the web and you will see similar stories. I spent so much time trying to solve this I think it's better just to do a re-install. Certainly not the resolution I had hoped, but appreciate this type of questions are almost impossible to solve the problems through intermittent mail such messages.
Thank you
Luke
-
After the new installation of hard drive and a reinstallation of Windows XP I: Drive, Windows Update continually responds with: "Files required to use Windows Update are longer registered or installed on your computer" by clicking on the option to register or reinstall results by bike to the same error.
Hi TedWie,
Windows update no longer works for systems with SP2 or less. To check your systems service pack level, click on Start, run and typeWinver in the Run dialog box. If your system does not already have Windows XP SP3 installed, download and install XP SP3 from the link below. (Ignore warnings about professionals of computing and network facilities).
Windows XP SP3.
http://www.Microsoft.com/en-US/Download/details.aspx?ID=24
Windows XP SP2. (According to THE level of SP)
http://www.Microsoft.com/en-US/Download/details.aspx?ID=28
Note:
If your system has a Processor AMD, download and install before installation of the SP3 of XP, theUpgrade utility Microsoft for processors not intelhttp://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=UK&LC=en&softwareitem=PV-60484-2
If you encounter problems installing XP SP3, you can refer to the procedure described in the link below to resolve an installation failure.
How to troubleshoot a SP3 Installation fails.
http://support.Microsoft.com/kb/950718
Let us know if this solves the problem.
-
I get the error code0x800706BE when trying to modernize the service pack 3 installation did not finish. and I do not have the original installation disc
Go here and download the complete file of the OFFXPSP3 edition: http://www.microsoft.com/en-us/download/details.aspx?id=23334
This page scroll down and read this paragraph: to install SP3 without the original Office XP CD
-
Cracked Windows XP SP2 CD
I need to reinstall Windows XP SP2, but my windows XP installation CD is cracked and would not read. I have the product key and proof of license. Is there a way to download files from microsoft directly support installation using this information.
Please see:
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hello dutchb,
The error, "another installation is in progress and must be completed first" can be attributed to the InProgress key found in the registry at:
HKEY_LOCAL_MACHINE\SOFTWARE\MICROSOFT\WINDOWS\CurrentVersion\Installer\InProgressChange the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.
I suggest that first make a backup of the registry or a system restore point. Then go to control panel, administrative tools, Services. Do scroll down and find the Windows Installer service, and set the start at the stop State. Delete the registry key to the location above.
Now, you shouldn't get the installation in the progress message when you try to uninstall programs.
I hope this helps.
Sincerely,
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
My laptop does not start at the top. It indicates that the following file is missing or damaged WINDOWS\SYSTEM32\CONFIG\SYSTEM.
Download this file from the Microsoft Web site. I put the XP CD in and it starts downloading files but it asks what windows installation I want to and don't gives me one option other than press "Enter" to abandon.
See if anything here helps-
How to recover a corrupted registry that prevents Windows XP startup
http://support.Microsoft.com/kb/307545Install and use the Recovery Console in Windows XP
http://support.Microsoft.com/kb/307654See also
How to Troubleshoot Registry Corruption issues
http://support.Microsoft.com/kb/822705How to fix a missing or corrupt Windows\System32\Config\System file
http://xphelpandsupport.MVPs.org/how_do_i_repair_a_missing_or_cor1.htmTaurArian [MVP] 2005-2010 - Update Services
-
Driver Installation module stopped working and was closed
Hi, can someone help with this error.
I am trying to install different drivers, but I get this problem "driver installation module stopped working and was closed" and as such, I can not install any drivers...
Is there a round work or a solution to this?
See you soon
Hello- What drivers are you trying to install?
- What were the changes made before the problem occurred?
I suggest you try to put your boot system minimum state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
-
My laptop is preinstalled with Windows 7 Home Basic. At the free launch Windows 10 I downloaded the same and after 2 months, the hard drive crashed. The repair shop trying to fix formatting, but could not revive. This is why I bought a new hard drive and repair charge shot Windows 7 Ultimate edition.
Now, I want to download 10 W but not able to do that, during installation, a problem arises and the previous operating system has been restored. When I posted the question about how to solve this problem, I was told to try the download by way of USB/ISO file.
Now my question is that
one) can I reload Windows 7 Home basic as I have the product key?
(b) I can then download Windows 10 according to the normal procedure?
I'm not tech savvy, afraid to download files in USB and then load into the laptop, so this question.
Concerning
S Subramanian
Original title: Windows 7 Home basic
You can directly download Windows 10. Windows 7 complete edition currently installed is not genuine.
When you upgraded from a previous version of Windows, what happened is that (your PC) hardware will get a digital right, a unique signature of the computer which is stored on the Microsoft Activation servers. The real Windows 7 or Windows 8 license you were using previously will be exchanged with a key to the diagnosis.
Whenever you need to reinstall Windows 10 on this machine, go just to reinstall Windows 10. It automatically reactivates.
Therefore, there is no need to know or get a product key, if you must reinstall Windows 10, you can use your Windows 7 or Windows 8 product key or use the reset function in Windows 10.
Maybe you are looking for
-
HP Z420: Z420 replacement HP Motheboard
Hello The motherboard of my hp z420 workstation is a failure (problems with the slot machines, boot etc...). Now, my question is this: is the only option to buy another motherboard from z420 or could it be an opportunity to upgrade (for example, by b
-
Hello I worked with Labwindows CVI 2009 without problem, but after the upgrade to the 2010 version, I have the following problem: When I m going to run the unistaller, Panel configuration Windows or directly from the icon uninst.exe, it doesn´t work.
-
Launch/capture camera on BB10
Hello I want to know if I can throw the camera of my Adobe AIR on BB10 device application. Can someone point me to the code that does the following: Launch the rear camera. Add headphones to check the operation of Image captured/canceld. Get the refe
-
Podcasts are available through the Zune music. How do I listen to on Windows RT? Do I need an app?
-
Change the operating system selected a virtual machine under tension in vCenter
Is this possible? I looked in the box change the Settings - Options - but I can't see the usual fall down?