Launch/capture camera on BB10

Similar Questions

• Time issue quick capture camera

  Start using my x yesterday. And the Twisty launch for device function worked fine before. But starting today, just noticed that after I twist my phone, it will be took almost 1 minute to start the camera! Try several times and even reboot, doesn't have the same...

  Somebody help...

  Thank you very much!

  Eaccents thanks for your attention and your suggestion!

  But before you get your answer on this, I reset my X and now it works fine...

  Not sure if it was a question because I just upgraded my X 4.2 to 4.4 directly (and unfortunately), with no adjustment before installing some apps...

  And, for further study on similar issues, I'm pretty sure that there was something on the NFC feature unlock. Because I am aware of this problem after that I have to start using Motorola Skip, that also with a few unstable question (before the reset, tried to disable the NFC but do not help to camera problem).

  But anyway, after reset, so far everything goes well (including NFC unlock service).

• Capture camera IMAQ via DAQmx trigger operation

  Hi all

  I thought I could re - this poster in this forum to see if I get more ideas!

  I work with a PCIe-1427 card connected by link to a camera (SUI Goodrich) and also using a card PCI-6731 to which I attached a connection block M SCC-68 series.

  I managed to write code to control the .avi capture the camera and write separate code to control the lighting of optical switch connected to the SCC-68.

  The two lines of the optical switch Relay different info and I will in turn present this information to the camera for analysis.  Ideally, I'd like to trigger the acquisition of the capture of the camera with the optical switching so that each image contains information of a single channel only, but I still fell in the integration of the operation of DAQmx meter with IMAQ camera code.

  Is this possible?  I see 1 previous post by using a RTSI cable can I connect the two devices together (or alternatively use the DAQmx to produce a trigger on the digital).  Can someone offer information or an example on how to route signals via the RTSI to IMAQ DAQmx?  Also do I tuned regarding the generation of pulses to the switch that allows signals to pass through RTSI?

  I find it by running my camera and counter code in vi even both will work (not in sync)-if I connect the RTSI and select the camera settings to accept the RTSI triggers, if it was a simple solution?

  I would greatly appreciate any ideas you may have. my time runs out very quickly and is really distressing.

  Sincere greetings and thanks,

  Miika

  Miika salvation,

  If I understand what you try to do in VI you attached, you want the output of the counter of the task DAQ to serve the trig by buffer task it IMAQ via RTSI.

  To do this, use the property node of channel DAQmx to configure the output terminal of the impulse to be RTSI 0:

  Select property > counter output > Pulse > output terminal

  B. change the node property to write.

  C. create a constant and select/Dev1/RTSI0

  On your IMAQ configure Trigger VI, RTSI value as type, set to 0 the number of line, set the action to trigger each buffer and set the polarity to rising edge.

  Oh yes, make sure to connect the RTSI cable for two cards.  I forgot that before and felt really stupid later.

  -Jeff

• Lightroom CC 2015 - not detected with captive capture camera.

  Use Lightroom CC 2015.  No camera detected with capture captive.  Have you tried the recommendations of standard troubleshooting.  With the help of Windows 10 and a Nikon D7000.  Help.

  Nikon drummers do not beat drums Adobe!

• Capture camera mini DVD?

  I have a client with a dvd of the mini of Panasonic and Sony cameras.  I was able to copy the images and rename the .vob to .mpg and edit files, no problems.  About 15 of the 50 disks have problems.  I'm racking my brain on workarounds to capture images.  Some of the discs will play on the cameras they record to.  I tried to take the records directly to my computer from the camera to a stand-alone dvd recorder with a bit of luck.  Is it possible to capture video via camcorder using the USB on my computer?  Would this work if I had a drop cable and used the av cables into my computer with first?  Other creative ideas?  I think this media is a bit dodgy and happy it seems to be obsolete.

  Thank you

  Lisa

  Lisa,

  I'm sorry that everything is not fine. The trick with the help of miniDV Tape cameras will be, do they Pass through? Once, it was common. Then, it seems that some European countries added VAT to those, determine a rate higher applied, as they were basically "decks," mfgrs Yes Ribbon. has started to disable the transmission of video description on the Euro models to keep their price-points online. Then, many have stopped just put this tour in their cameras. So, it's really one - situation "it depends." If your have pass through, which should work fine. Don't forget, you need to place the miniDV camera in the appropriate mode (see manuals), and you will have the remote, because that goes only on FW and source machine is hooked to the camera via composite cables. Yet, we can simply press Play, and then click Capture in quick succession. I do similar with my DVR to my deck-D. I have remote DVR in my left hand and my mouse in my right. At most, I capture maybe 5 empty frames. Learn to juggle and be ambidextrous! After a bit of capture in this way, I can almost drink a coffee with my left hand.

  Good luck and I hope that your camera has transmission capabilities.

  Hunt

• launch native camera?

  I know that you can access the camera by flash builder, I want to start the native application camera on the playbook, as do the many applications I've seen. Did anyone done this before? I tried to reproduce this in my application, but is not quite the same thing, and I know that the native version would work more smooth than what I have now. Help and advice is appreciated, thanks.

  Found the anwser here, the great code examples.

  http://www.unitedmindset.com/jonbcampos/2010/09/29/air-for-Android-camera-and-camera-roll/

• BlackBerry smartphones yet another bug - camera records incorrectly in memory at the launch of the lockscreen

  How to reproduce (and Yes, that's with the software of camera bb last updated from the game store):

  (1) to unlock the phone, insert the SD card, tell app camera to record pictures on SD card.

  (2) since the pitcher, after that phone is unlocked, start the camera application and take a picture. Use a file Explorer (I use ES File Explorer), and you will see that the picture has been saved correctly on/storage/sdcard1/DCIM/camera.

  (3) turn off the screen, then restarts.  Instead of dragging up to unlock, swipe to the left on the lower right camera icon to launch the camera directly.  Take a picture.  Using a file Explorer (or the details of a gallery app), you will see that the picture has been saved to/storage/emulated/0/DCIM/camera /, which is the memory internally.

  This phone is so buggy-with this, the keyboard double letter dropping and lag, overheating General and fast battery slide during use... on top AT & T startup sound, I can not turn off even muted, and "AT & T" shout his name in my face on the top bar each time notification I unlock the phone on my unlocked phone... I'm almost ready to return the phone and get back to my loyal Passport SE.

  .. new good .and!  This is a bug we have set and will be available in the next update on the Google game.

• Program registration launch video app

  Hello

  I was wondering if there is no API to start the video recording in version 4.5.0 application? I want to call the VCR through my application, record a video, and then save this video on the server.

  Thanks in advance,

  Mark

  Programmatic video capture is not currently supported.  You can launch the camera application using the Invoke class and listen to the videos that the user is registered.  The fileexplorerdemo provided with the JDE BlackBerry and BlackBerry JDE for the eclipse shows an example of this (using images instead of the video).

• camera update of iOS 10 problem

  Hi all!

  Did an upgrade on iPhone 6 to iOS10. Discovered that the camera works very badly. When you access the camera on the lockscreen, he hangs up. After the launch, the camera shows black screen or static blurred image on the picture frame. Change for recording, the camera begins sometimes to work. Then switching to the definition, work badly the recording settings are working a little bit better but still frequently hang up pictures. It is the same for access to the phone after having unlocked the phone. Hasn't done anything on the material and everything worked fine before the upgrade. What can we do about it? Think without decommissioning once again, so that the camera works normally again. Need to use it a lot.

  See you soon!

  Hey snail_mail,

  Thank you for using communities Support from Apple. I can see from your post that you are having problems with your camera since the upgrade to iOS 10. Having a camera work is part of a great smartphone experience so we would like to help with this. I have included a link below which has some troubleshooting tips to help make it work normally again.

  Get help with the camera on your iPhone, iPad or iPod touch

  ​

  Let us know if this helps

  See you soon.

  ​

• Satellite A205-S4707 - cannot run camera on Windows 7

  Hi all!

  I have Toshiba Satellite a205 s4707, with Windows 7.

  It has the latest drivers Toshiba bios is after update, but I can't launch the camera. I tried everything I found on the internet but not worked for me.
  I tried to install a different software (not later), reinstall, update...

  I GIVE UP!

  Pls help someone! Show me that there is another way that it will run my camera!

  I have the driver installed, but in Device Manager, I have warning with "Chicony USB 2.0 Camera" - code 10.

  Help! PLS!

  Hey,.

  Error code 10 in Device Manager means usually only it s a driver problem...

  Which Toshiba page you downloaded the latest webcam driver?
  Using Windows 7 32-bit or 64-bit?

  In your case, I would like to delete the current version of the software of the webcam. Then restart your computer and install the latest version of it.

• Compatibility of capture programs is no longer my internal lenovo easy opens after an update of W. How should I do?

  Compatibility programs my internal lenovo easy capture camera is no longer opens after an update of W. How should I do?

  Hi Lil V,.

  1. you receive messages or error codes?

  2 Windows operating system you are using?

  Step 1:

  You can try to update the drivers for the time and see if it helps.

  http://consumersupport.Lenovo.com/OT/en/DriversDownLoads/drivers.html

  Updated a hardware driver that is not working properly

  Step 2:

  You can also run the material Fixit and see if it helps.

  Hardware devices do not work or are not detected in Windows

  Hope this information is useful.

• switch 10 update camera (2400 PSI)

  I installed a windows update to 2400 PSI. After I tried to launch the camera app and it now tells me, first install a camera. I tried to roll back the driver yet am still not able to get the camera.

  I had the same problem. After I restored the ISP 2400 driver, the camera work again.

  This problem happened also to other tablets only after the windows update driver update.

  So I think that's not for lack of acer.

  Uninstall the 2400 PSI update driver may fix the problem.

• motion eye camera / webcam does not work. "" Installation when trying to install the drivers, it says "failed".

  Original title:

  motion eye camera / webcam does not work.

  I have not capture camera utility installed on my laptop and when I download site sony vaio, it says the installation failed.

  model is sony vaio VGN-CR19VN

  Hello

  You encounter an error message and the error code during the installation of the driver?
   
  Uninstall the drivers of webcam completely from the laptop and reinstall in the clean boot state.

  Link to download the drivers:

  http://www.Sony.co.UK/support/en/product/VGN-CR19VN_B/downloads/SOACCU-01363010-UN_3265 

   

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7, of the above, provide the KB article.

  I hope this helps!

• Camera for PlayBook API

  I've seen a camera for BB10 API, but do not see it for PlayBook NDK.

  It will be available? When?

  It is in the beta 2.1 NDK and ship on OS 2.1 for PlayBook.

  See you soon,.

  Sean

• Listeners in c / c ++ development NDK for BB10

  Hi all

  I would like to know if there is the API for capture/listening in BB10 events, as if a call is made / received.

  my application should listen and respond.

  Thanks in advance.

  Kind regards

  Kavita

  Hello

  Interacting with call or sms events is not currently supported on BB10;

  To access the documentation for all the features currently supported, please see below:
  https://developer.BlackBerry.com/Cascades/documentation

  Kind regards

  Martin