Installation of a new SSD for my new 8700 XPS

Similar Questions

• Questions new installation HD SSD for MacBook Pro

  I followed the online instructions how to install the SSD for my MacBook Pro. I then rebooted by Mac in recovery mode and formatted the drive in Mac OS extended (journaled). It was a little bit tricky message sometimes giving such as erasure of disk failures, but eventually it worked. I selected to install the OS on this HD. The image of the OS were first shown on OS X Lion, but my current OS is El Capitan. I just figured that he was installing the original operating system provided with the mac. The installation went well but then we he had finished wen timer back to 1 hour, 46 minutes. He made several times and after 6 hours, I decided to leave and start over. The second time after erasing HD and formatting again the OS that came was El Capitan for installation so I continued. This time, the installation has been completed and at the end says "OS could not be installed on my computer, reboot and try again." On the third attempt has received a similar message from the failed to install ' year error occurred during extraction of the files in the package "Essentials.pkg." " »

  Anyone has any idea why this doesn't work or suggestions please?

  About 2 months ago I reformatted my HD original as installed latest OS El Capitan as the mac has been slow. Does have a report with questions I get on doing the same thing with another HD?

  What model of MacBook Pro?

  Which SSD model?

  You have another Mac?

  Possible causes:

  -Incompatibility of your Mac with this specific SSD. Recently, some users have reported what appears to be these incompatibilities

  -You damaged the cable flex between the drive and the system board.  It is a common problem and causes intermittent problems initially and if it's even worse the Mac will see is even more disk

  -You have an another hardware problem as RAM bad or other component.

  I'd do it

  -Run Apple Hardware Test

  Using Apple Hardware Test - Apple Support

  -Connect an external drive and install OSX on this disc and boot from this facility and see if you have any problems

  -If you have another Mac download a compatible OS x Installer for the Mac App Store and create a USB bootable using device

  http://liondiskmaker.com/

  and install OSX on the SSD.

  This is the Office Mac Pro forum. I asked that your post moved to the appropriate forum.

• What is the fastest connection that I can use for a new external SSD for my MBP late 2008?

  That IS the question. I want a new external SSD for my MBP late 2008.

  What is the fastest connection type that works?

  'External' and 'SSD' could be a problem.  SSDS are different animals of disks spinny.  Some will say that you need not trim on SSD (TRIM is a management tool to move only the ' opportunity' bytes in a block when the block of data is moved), but definitely TRIM does not work on USB or Firewire.  Not sure if the TRIM works on Thunderbolt connected readers as it does on disks SATA-path, however.

  Speed included between slower and faster, however: USB 2.0, Firewire 400, Firewire 800, USB 3.0, love at first sight.

• PS CS6 serial number is OK.  Installation on a new computer, he asks for a previous product SN.  I enter 7.0 SN then PSCS2 SN and no number is accepted. Who should I contact?

  PS CS6 serial number is OK.  Installation on a new computer, he asks for a previous product SN.  I enter 7.0 SN then PSCS2 SN and no number is accepted. Who should I contact

  I have the serial number of the previous boxed version, please check if it works for you.

  Concerning

  Stéphane

• My Windows 7 Professional Office system disk has been corrupted and I took the opportunity to install a SSD for a new system disk and reinstall Windows.  The system is installed and running on the SSD, with my old drive system currently used for storage a

  My Windows 7 Professional Office system disk has been corrupted and I took the opportunity to install a SSD for a new system disk and reinstall Windows.  The system is in place and running on the SSD, with my old drive system now used for storage as it is still readable.  The only product Adobe, that I reinstalled so far is drive XI but I would like to reinstall items 8 and Acrobat 9 without occupying more licenses that both are also installed on my laptop.  Can you tell me the best way to do it?  -Thank you

  If you have two activations allocated already and one was lost on the hard drive that has failed, then you must contact the Adobe Support via chat and ask them to reset your activations.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• Working Group stopped after the installation of the new wireless router

  My working group stopped working after the installation of the new wireless router.  Router was switched were to move from DSL to fiber optic.

  I have a very simple home with two laptops working group, the two are connected with a wireless router.  A PC is running XP with the updates and service packs; the other PC is Windows 7 Home premium.  This working group was running without problems for a few years.  The Working Group has been used to share files between two laptops.  Internet access was through the DSL wireless router and print was with a wireless printer, without going through the working group.

  I had my DSL set out to free fiber optic last week, which meant that a new wireless router has been installed by my local phone company.  Internet works fine; wireless printer works.  The working group no longer works.  When I try to connect from XP to Win7 and I click on mode workgroup computers, I get this message:

  WorkGroupName is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.

  The network path was not found.

  I tried to create a new working group, the new name for the same workgroup on both machines, but this did not help.  Working groups are supposed to be simple; This seems to be a problem on the new router - telco tech support says that nothing is stuck on the router. I don't believe them.

  What version of XP you use (Home or Pro)?

  Can you access the Win 7 a XP computer?

  You have identical accounts, passwords on both computers?

  If all that was done was to change routers without making any changes on the computers, the most likely cause of the problem is a third party (other than Windows) firewall on at least one of the computers.  Being by default, a router automatically assigns IP addresses to computers on your local network.  Different brands of routers, but use different address ranges.  For example, Cisco/Linksys routers typically use the 192.168 form addresses. 1.1 with 192.168. 1. 254, while the D-Link routers typically use 192.168.1 to 192.168.0.0. 254.  A firewall configured to allow only the first IP range blocks communication to the scope of the latter.

  So... What is the name and version of your anti-virus program?
  What other security software is installed?

  On every laptop computer, open a command prompt window
  for XP: start > run > cmd > OK
  for Win 7: type cmd.exe in the search box and press enter
  In the black command prompt window, type the following command and press enter
  ipconfig

  Please provide the values for the following for the adapter wireless of each computer
  IP (XP)
  IPv4 address (Win 7)
  Default gateway

• Cursor not moving/working after the installation of the new keyboard

  I just finished replacing the keyboard on my HP G72 due to spill water on the keyboard a few days ago & some keys no longer work after laptop parched. However, I find that things are not as they should because I can't get the cursor to move. I do not use a mouse & rely on the touchpad. I tried to remove the keyboard & reinstall several times but all about no. avail & wonder if anyone can give me some advice, even if it is the keyboard itself may be defective & I need to buy a new one. I don't want to just assume there is a problem with this new keyboard only to discover that the problem is somewhere else & that there is other things I should be doing or trying.

  I had to install a new keyboard on this computer laptop sometimes last year afer having a similar accident with the flow of the water, but the installation of the new time was pretty much a piece of cake, I followed the guides on the screen, I have been looking & everything was perfect, once I had installed the new keyboard.

  Thank you if you can advise.

  Hello

  If possible, try a USB mouse for awhile. This way if the slider works, you can try reinstalling the drivers for the touchpad that could solve the problem. If the cursor does not work with an external mouse also then the problem could be hardware related.

  Sometimes to repeat the installation process of the keyboard all over again also helps.

• the best game of video card with the power pack for a new 8500 XPS

  What is the power supply best match with the graphics card AMD Radeon HD 7770 for my new desktop XPS 8500? The original of the graphics card is nvidia GeForce GT 640, but then Dell sent me that the order has been changed to this nvidia card is no longer available for a PC Windows 7 XPS 8500. So now they have changed my graphics card to this 7770 AMD which shows a 500 watt minimum power is required, but the 8500 has a 460 watts inside. So I email Dell customer support on this topic, but since I don't play all the games or graphics applications high, 460 watt will work OK or not? Either type OEM AMD Radeon card available from Dell for this computer is the HD 7570 with lower at only 400 watts power supply needs?

  The 7770 works perfectly with POWER 460 block. It is much faster than the 7570. Although the 7770 recommends a 500 Watt power supply, it attracts about 140 watts on average so no need to worry.

• How to recognize an uninstall to allow installation on a new computer by Adobe?

  How to recognize an uninstall to allow installation on a new computer by Adobe?

  Sign out, sign in | Creative office cloud app

  http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

  Help of activation & deactivation

  https://helpx.Adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html#a ctivate-how-to's

• Organize my SSD for first installation / After Effects, your opinions between Mushkin / Samsung PRO 850... ?

  Thank you for taking the time,

  I have i7-5960 x arrives in the mail, it is a huge upgrade for me to sage of the CPU, and I intend to install it on the motherboard ASRock Extreme 4 x 99.

  I have installed ram 64 GB with mono-GPU (Evga overclocked 980Ti) - I also ordered a bolt of lightning ASRock extension adapter to install in one of the PPI.

  with internal Samsung PRO pci 512 m2 will be installed (and hopefully also works!) for my OS/PROGRAMS;

  Now in the light of the information (please do not hesitate to give a few tips if you think that something's going South) above

  I have the options of 3 disks Samsung Pro 850 SSD (1 to) each

  and also Mushkin reactor 1 TB drives coming from another system.

  Now because m2 is expected to be only to win 10/programs installation, I thought I had 3 separate SSD for media (media that I capture) - Render (output) and the Disk Cache

  now I know PRO Samsung SSD are preferred for editing configurations 4 k video, but I also want to save money to change my monitor in the near future, so I want to return

  some of the Samsung SSD if possible.

  I want to ask if I wanted on Raid 0 to increase the speed of 1.5 x times. should I do for media drive, or make it output drive or Cache?

  what player in terms of managing files in Adobe Premiere and AE would benefit more and be more safe if a failure at the top of my head, I think there should be files that I can lose a days work if hds Raid goes down?

  I thought I can keep records of 1 TB of reactor of 2xMushkin in RAID 0 for this player that you would suggest.

  and perhaps just one Samsung drives for others. I'd really love to hear your comments; Even now, I'm sitting on a certain readers, but I want to save money in the long run since Sammy readers are quite expensive.

  Thanks to you ALL

  page Tweakers is a starting point for the advice, but its general advice that may not match your specific needs. some of the information there was written for 7200 rpm disks.

  hackers page says that its important to separate the OS/applications of the media player, so that the windows of standard tasks done constantly in the background is not interrupt reads/writes on the media player when editing. He goes on to say that disk operating system/applications doesn't have to be anything other than an ssd sata. the samsung 950 pro m2 will be only windows boot a bit faster and a little faster, has nothing else once they are open and running of programs.

  scratch disk has several settings for the captured media and rendering of previews. Some people use none and so their installation program does not need a disk separate cache / scratch for first, and they can leave their cache on the disk for the OS/applications. for AE, it will depend on if you have the disk cache. If you are interested in a cache drive, which could be shared with first rendered preview and scratch your files.

  'media' on the page of tinkerers and forums here, almost always refers to camera video files, not video files captured through a map of IO with the first or any other software. If you capture images with a map of IO, there can you want to have a dedicated ssd to it, to make sure that nothing interferes with the disk writes.

  the media cache database files are as creating files for indexing creates to help speed up the playback of files while working with them first. media cache is not the same as zero/capture/preview makes. Bill (forum member) did a lot of tests with disk configurations and also tested leaving media on a sata ssd cache used as disk operating system/applications. He concluded that it makes no difference to performance. so no, there is no need to worry about raid for the first cache files. If you want to use the samsung 950 pro for OS/apps, you can also leave your cache about it. You can even have enough space to use the 950 pro for the cache drive AE and rendered preview files creation too.

  all this is based on the media and what will be done in the timeline, such as screenshots, multi-cam, or preview files. the samsung 950 pro is fast enough to do anything, as long as it fits on the disc. the CT 1 950 pro releasing will see even more people with a configuration to a single disk for everything. other people will be fine with only two ssd sata, one for the OS/apps/cache and other media projects. Some will have more ssd sata or ssd pcie for increasing the speed or the ability to adapt to their specific needs.

• Adobe Premiere Pro requires new mac operating system. My Adobe programs already installed would work after the installation of the new operating system?

  Hey there,

  I think to get the Premiere Pro, which requires that the new Mac operating system. But I installed the other Adobe programs such as Photoshop, Indesign etc years ago.  These work on my current operating system (= Mac OS X 10.8.5).) Anyway, now I wonder if my programs already installed Adobe might work after the installation of the new operating system.

  Any ideas what to do?

  Thank you very much.

  Yes, they will work in the new OS.

  Kind regards

  Hervé Khare

• Creative Suite 4 installation on a new Macbook pro. Go to see all the problems?

  Creative Suite 4 installation on a new Macbook pro. Go to see all the problems?

  In fact lost the Premium 5 installation disks then goes to the rear.  Help Adobe didn't seem to know how to get me the serial number of that I spent money (bonus 5)

  install cs 5.

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC | XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 10, 11, 12, 13. 9,8,7
  • Lightroom: 6| 5.7.1| 5 | 4 | 3 | 2.7 (win),2.7 (mac)
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  window using the Lightroom 3 link to see these "important Instructions".

• During installation my PC (new) power loss; How to remove a partial installation of PE and start fres

  During installation my PC (new) power loss; How delete a partial installation of PE and start again?

  I would normally do a system restore, but, given the new PC - literally old - 2 hours I don't want to go this route so avoidable

  Hi xpkrqschism,

  You must manually remove partially installed files and folders from the system.

  Please see KB: http://helpx.adobe.com/photoshop-elements/kb/manually-remove-photoshop-elements-11.html

• How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  Pure how to install OSX on a Fusion drive and keep the recovery disc function

  These instructions assume that your iMAC partitions or file systems has been damaged and you want to restore to the way most efficiency with fusion drive and the recovery partition, similar to what was built in the factory.

  These instructions work for the iMAC, retina 5K end 2014 version comes with OSX Yosemite. The scores of major drive of the 128 G SSD and 3 TB of HARD drive has been configured as a logical drive (merger by car).

  WARNING: These instructions here are shared for interest only. Readers to take their own risk by following these instructions. The author is not responsible for any damage caused by following these instructions.

  This is the target disk partitions, and the configuration that we want to achieve.

  Disk0 is the 128 GB SSD - solid state drive and holds the start of the partition (disk0s3)

  Disk1 is the 3.0 to HDD - mechanical transmission and holds the Recovery HD partition.

  There are two EFI partitions to partition table GUID on both hard drives (disk0s1, disk1s1).

  Disk space remaining (partition disk0s2 and disk1s2) are used to create the disc of Fusion 3.1 to named "Macintosh HD".

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB LVG 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: disk1s2 Apple_CoreStorage TB 3.0 LVG

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 3.1 TB disk2

  Logical volume on disk0s2, disk1s2

  0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  Fusion unencrypted drive

  Here's how we do it.

  • A. clean reinstallation of Mac OS x.
  • 1. make sure that you back up all your data on the hard drive using Time Machine or other means. The following procedure will delete all data.
  • 2. create the OSX install USB, insert it to the MAC workstation.
  • 3. given that us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 4. in the menu at the top of the screen, select disk utilities.
  • 5. turn highlighted the volume of disk Fusion called "Macintosh HD." Click clear to clean.
  • 6. If his success, then go ahead to install OSX new to that partition, as usual.
  • 7. otherwise, if it does not, that means fusion drive has been damaged.
  • 8 follow the instructions below to fix it.
  • . B. Split disc Fusion in the physical hard disks
  • 1. Since us will be operated on the internal drive of the Mac trunk, assumes that we already have boot up OSX install USB drive (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3. on the screen of the terminal type:
  • Cs diskutil list.
  • You will see something similar to the screen below.
  • 4 copy the long string after Logical Volume and replace the UUID with it in the following command to delete the logical volume of the disc fusion (aka coreStorage of logical volume):
  • diskutil deletevolume cs UUID
  • For example:
  • diskutil deletevolume E59B5A99-F8C1-461A-AE54-6EC11B095161 cs
  • 5 copy the long string after the logical volume group and replace the UUID with it in the following command to remove the drive (aka coreStorage) fusion:
  • diskutil cs remove UUID
  • p. ex. diskutil cs remove E03B3F30-6A1B-4DCD-9E14-5E927BC3F5DC
  • 6. at this stage, the fusion drive has been deleted, and hardsisk SSD and mechanical hard drive will be reappear in diskutil or separate records.
  • 7. If step 5 or 6 takes more than 30 minutes to complete, this means that the fusion drive has been corrupted. You can follow the commands below to clear the table to partition the hard way. First command clears the SSD drive, second command erases the HARD drive.
  • The command does not return a response, after 1 minute, press Ctrl + Z to complete orders. 1 minute is enough data to code and erase the partition table on the disk.
  • cat/etc/random >/dev/disk0
  • cat/etc/random >/dev/disk1
  • . C install a new copy of Mac OS x for the hard drive HDD and tested this disk partition hard recovery work.
  • 1. go on diskutil to create a partition called Macintosh HD HDD hard drive using all the space there.
  • 2 do the same with the mechanical hard drive.
  • 3. follow the usual procedure to boot from the installation of OSX USB and install a new copy of Mac OS x hard disk SSD.
  • 4. This will create the correct priming of the partitions, recovery hard drive partitions and PSX partitions hard disk HDD.
  • 5. once the installation is complete, test if OSX may start successfully, but no need to go through the initial MAC OS x didn't put in place that we're going to waste this and do the installation again later.
  • 6. we must now test if the recovery hard drive partition works.
  • 7. reboot for hard drive recovery (see X - by pressing command and R at the same time during boot right after that you hear sound start and release only a few seconds after you see the apple logo and the progress bar for loading...)
  • 8. it is important to test and make sure that the partition of hard drive recovery.
  • D. recreate the fusion drive
  • 1 since us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3
  . on the screen of the terminal type:
• diskutil list.
• You should find that we have a list of disk group hard physical volume only, no logic here still.
• 4. you will see something similar to the screen below.
• 5. search for the largest partition on the SSD hard drive, which should be close to the maximum size of HDD to the SSD (121 G, for example) and mark the name of the device, this will usually be something like/dev/disk0s2
• 6. search the largest disk partition mechanical forming fusion with the SSD hard drive. This should be close to the maximum size of the mechanical hard drive (for example 3 TB) hard disk and mark the name of the device, this will usually be something like/dev/disk1s2
• 7
. Now let's create the merger in car (group alias logical volume) in the Terminal, type: diskutil cs create nom_lecteur driveIDs
• The number of the driveIDs is unlimited, it may be a number of discs, or a number of disk partitions. Always put the faster discs first, for example for our SSD disk0s2
• For example:
• diskutil cs create fusiondrive disk0s2 disk1s2
• diskutil - the version of disk utility command line.
  cs - This calls for Core Storage, which is necessary for the merger.
  create - creates a basic storage group.
  nom_lecteur - is the name of the drive and how you want that he
• appear in the disk utility (not the Finder - that comes later). You can call it what you like; in our example, we named our Fusion table "Fusion".

driveIDs - Here is the Player IDs of the readers you want as part of your Fusion table, separated by a space. In our example, they are 'disk0' and 'disk1', but it may be different in your configuration.
• It is important that the faster hard drive appears first in the command, which in our case the disk0s2 (a partition in the SSD). In this way, drive fusion will use this disk as primary and the cache. The second disc in the command, in this case disk1s2 (a partition on the HARD disk). The secondary disk (HARD drive) is used to store less frequently used files.  Otherwise, the fusion drive performance will be worse that it is designed for.
• 8. you will see something like below appear on the screen:
• Creation Volume logical storage of kernel
• Move isk0s2 storage of carrots
• Disk1s2 of switching for the storage of carrots
• Waiting for logical volume group appear
• Discovered the new group of logical volumes 'DBFEB690-107B-4EA6-905B-2971D10F5B53 '.
• Store LVG UUID: DBFEB690-107B-4EA6-905B-2971D10F5B53
• Finished CoreStorage operation
• 9 copy to the bottom of the string after "Discovering new Volume Logic Group" using the command + C
• 10. next, create the partition of the merger (alias logical volume) drive named "Macintosh HD".
• In the Terminal, type: diskutil createVolume groupString jhfs cs + size volumeName
• For example:
• Diskutil createVolume DBFEB690-107B-4EA6-905B-2971D10F5B53 jhfs cs + 'Macintosh HD' 100%
• diskutil - once again, this is the version of disk utility command line.
• cs - called the basic storage functions, which are necessary for this arrangement.
• createVolume - this is the command to create the storage area real for the reader who is represented by an icon on your desktop.
• groupstring - this is the long alphanumeric string you copied in the previous step. It identifies the table you created such as getting a volume placed on it.
• jhfs + -the format of the disc. It is Apple (journaled) extended Format, which is recommended for drives with an operating system installed on it.
• VolumeName - the actual name of the volume, how it should appear under the icon. If there is a space in the name, you must put the full name in quotes ("name") or put a slash before the (name Drive\) space. In our example, we made these, naming our volume "Macintosh HD".
• size : this is the size of the volume. In our example, we had a 1.1 TB drive. We used '1100g' to describe what 1100 GB (1.1 TB to base 10). Otherwise, we could have also used 1.1 T or even 100% as a size.
• 11. go to diskutil to verify that you can see this new partition on the list.
• 12. test by erasing all the data from it.
• 13. then you can go ahead to start on the USB drive to install OSX and install a new copy of Mac OS x on it.
• 14. This will allow you to keep the recovery disk feature.
• X. how Prime to recover partition
• Press and hold the command and button R set immediately after hearing the bells to boot.
• Only release it 2 seconds after you see the Apple logo on the screen and the progress bar for the start. This will start the partition of hard drive recovery.
• Y. how-to boot OSX install USB
• Press and hold the command and the optionkey together immediately after hearing the ringing of boot.
• Only release it 2 seconds after you see the Apple logo on the screen and it will give you a list of startup disk choice, choose the OSX install USB to boot from.

• Please recommend an SSD for Toshiba Satellite C660D-10W

  Hi people

  I'm looking for a recommendation for an SSD for my laptop, Satellite C660D-10W

  I want to perform a clean build - I have a new licensed copy of Windows 10 Pro.

  I bought a disc of Kingston after some research online, but subsequently discovered Kingston declaring that they do not support the use of this device in my laptop.

  Toshiba customer support put me on "Topaz", which recommended product + service (though not an SSD!) cost more than 250 pounds. For that price I can get a replacement of like-for-like of the laptop under warranty!

  I'm looking for a simple option where I can buy a SSD and do the installation myself. 250 GB to 500 GB for the region of £60ish.

  Thoughts?
  Chris

  I have a Crucial SSD in my C660 - 1 7. He turned my laptop. Boots in seconds!
  They have special offers for the moment like this http://uk.crucial.com/gbr/en/satelli...-10w/CT6696741 250 GB @£ 63,59