Installation of Apache on VIMA

Similar Questions

• Oracle Webgates 32 bit Installer for Apache 2.2

  Dear team,

  I need Oracle 32-bit Webgates installation Installer for installing Apache 2.2 Web Server x 32 bit.

  I checked upon delivery of the Oracle, but there is no specific apache Installer.

  Please help us.

  Best regards

  Arun

  Discover support Note 1619117.1

  11.1.2.1 webgate is supported for Apache 2.2.x (covers both 32 bit 64 bit)

  Concerning

  Aakash

• Since the installation of Apache, I can't open the Open Office files

  Failed to open .odt or .ods files. Get the following: Open Office.org3.3 fatal error. The application cannot be started. ISO resource could not be loaded b application of Sfx.

  In fact, this is the support forum for the Firefox web browser. For Apache web server, official support is here: https://httpd.apache.org/lists.html for OpenOffice questions please try the support forum link posted by the-edmeister.

• FMS 4.5 with existing Apache installation

  Hello

  I installed FMS 4.5 on an existing Web server that is already running Apache.

  I have installed FMS 4.5 and checked the Apache installation option, so there is no conflict.

  When I use the sample page of videoplayer, I can't have one manifests work, even if the fms.ini is not at the root of the existing Web server.

  I need to configure to get 4.5 FMS to talk to my existing Apache Server?

  Thank you

  I thought I read a thread discussing this problem but I can not find (try searching).

  I don't know if that answers your question, but the following explains how to use one existing installation of Apache HTTP Server other than the one that installs with Flash Media Server:

  http://help.Adobe.com/en_US/flashmediaserver/configadmin/WSd391de4d9c7bd6093a7e2f8312a374a-1bde - 8000.html #WS565cbb3ff5441e2614fa39ef13121395a10-8000

  The subjects are quite similar to the steps proposed by the article could point you in the right direction.

  > I have installed FMS 4.5 and checked the Apache installation option, so there is no conflict.

  Please note that the article asking you to install Apache as part of FMS to copy the Apache files to the other server. You may have to re-intall FMS with selected Apache Server, follow the instructions above, then uninstall the Apache server that should not be used.

  Good luck.

• Errors related to BSE quick installation 12.1 RW-500015 HTTP

  Hello I am trying full EBS 12.1.1 on RHEL 5.8 64 bits of the operating system using the Quick Setup program.
  
  I get the following errors on the control screen after installation and I have been unable to solve these problems. Any suggestions would be greatly appreciated!
  
  Thanks in advance.
  
  
  RW-500015 error: listener HTTP does not
  RW-500015 error: Server HTTP virtual directories does not
  RW-500015 error: Login Page does not
  RW-500015 error: Help Page does not
  RW-500015 error: JSP does not
  
  Published by: 917901 on March 12, 2012 08:45

  Hello I am trying full EBS 12.1.1 on RHEL 5.8 64 bits of the operating system using the Quick Setup program.

  I get the following errors on the control screen after installation and I have been unable to solve these problems. Any suggestions would be greatly appreciated!

  Have you completed all the steps according to the (Oracle E-Business Suite Installation and upgrade 12 Release Notes (12.1.1) for Linux x 86-64 [761566.1 ID])?

  RW-500015 error: listener HTTP does not
  RW-500015 error: Server HTTP virtual directories does not
  RW-500015 error: Login Page does not
  RW-500015 error: Help Page does not
  RW-500015 error: JSP does not

  It is a common mistake - please check the files Setup logs for more information about this error.

  R12 Post Installation steps: Apache fails: RW-50015 cannot load Libphp4.So, unresolved symbols [ID 736689.1
  Fresh R12 Installation fails with RW-50015 [ID 452101.1]
  R12 Rapidwiz Postinstall steps Http, JSP, connection, the virtual directory page, Help Page fails [414414.1 ID]
  Is it Ok to have a hyphen in the host name or domain for Oracle Application 12.1.1? [ID 1347448.1
  Could not load program FNDPSTAX, rtld: 0712-001 symbol nzospRandNum [1100836.1 ID]

  Thank you
  Hussein

• Help FMIS - first installation

  Hello, I really need your help...

  Its my frist at the time of install FMIS on my server dedicated.

  And excuse me for my English is french speaking... I hope you can understand me...

  I have Windows Server 2008 R2 with the IIS web server.

  My site is installed on IIS.

  I have 2 ip:

  XX.xx.xx.38 (Web Server - dedicated IP)

  XX.xx.xx.107 (another IP not usage)

  My question is:

  1 when installing FMIS, I need install with Apache or not?

  2 - If installation with Apache... I need to configure for Apache to do not have problem with IIS?

  3. If not install Apache... how I can access the admin console? I need to copy the FMIS webfolder in my IIS?

  I'm trying to install and I don't choose install Apache... And the result is:

  I see in the newspapers that my server is running and I managed to connect

  but I can't go to my admin console. I have error that IE not accept module I think is shockwave

  But in install I do not change ip or anything...

  Can you help me with this?

  I'm sorry but I find it hard to just what is the problem you are experiencing.

  Try xx.xx.xx.107 for adapter Hostport i.e. Configuration

  ADAPTER. HOSTPORT = xx.xx.xx.107:1935, 80 in your fms.ini. -Restart the server and see if you can connect to your FMS using xx.xx.xx.107.

  If it works - it means FMS is tuned properly and cross connections. If this is not the case, see your edge or masters newspapers to see if all the listeners began or was there some mistake of binding to the ip and port.

• Installation of PHP on FMIS 3.5

  I recently installed and implemented a FMIS 3.5 configuration and my web developer wants to have php on the server to create dynamic content.  It's not for the life of me, I can get PHP to work on the server.  Are there special instructions that must be followed with this special version of Apache that is already installed?  Or is there a particular reason that I must use this version?  If it won't hurt no matter what, I'm more than happy to just uninstall and install my own Apache module, but also, I don't want to limit or cause problems in the future by doing so.

  Thanks for any idea.

  I have exculisvely run FMS with a version of another apache then one delivered with FMS by doing so, you get more support for apache... what you do is uncheck the box for the installation of apache when install you FMS then install apache with PHP and FMS connections are supported through rtmp connections no configuration of php or apache is necessary to the functioning of the FMS.

  -calmchess

• connection with guest host?

  IM using vwware workstation 7.0

  my host OS is windows 7 and the guest operating system is windows xp.

  installation of apache tomcat comments 6...

  I've already set up apache with the comment ip addess.

  means instead of using localhost

  If I give " " http://192.0.0.1:8080 / "then the apache is and they were working inside the guest. but I want to access only the host apache using the "http://192.0.0.1:8080 /"..

  what I do for them...? How can I configure the ip host?

  Please help me...

  It won't be easy for me if you say that I must give this ip?

  host for what?

  No need to change anything on the host, because it will lead the 192.0.0.1 if you follow the example.

  Comments for what?

  for example 192.0.0.101

  u said "attach the virtual machine to the VMnet." what is meant by this?

  Attach the virtual machine to the VMnet you configured to 192.0.0.0

  and what is meant by "virtual network in the host address will be"XXX1"."?

  On the host virtual network card will be created with address 192.0.0.1 if you follow the example.

  

  

  André

• When you use a custom URL to preview Live, Chrome says that it cannot connect

  When you use a custom URL to preview Live, Chrome says it can't connect and Adobe Code declares that the browser has navigated away from the project.

  I'm trying so he can use the same port every time, so I can code on Localhost using the Facebook API.

  See you soon

  Hello BeamJinn,

  The port on the local host to the live preview changes all the time?

  If you specify a URL of Base Live Preview, so you need a webserver running on this address and port.

  For example:

  If you are running an Apache Server on port 8080, you must enter http://localhost: 8080 as the base URL. If you now work on your files in the folder of your installation of Apache document root, you should be fine and the live preview should work as expected.

  HTH,

  Ingo

• Solaris PHP 5.2.12 Oracle Instant Client error

  We test an Oracle Solaris 11 Express Server with the standard installation of Apache and PHP. But we have the Oracle Instant client and module oci8 enabled for applications of our society.
  
  We did it using the. / pecl install oci8 in usr/php/5.2/bin. We set the LD_LIBRARY_PATH in /etc/apache2/2.2/envvars
  
  version 32 bit for solaris (x 86) of the Oracle Instant Client 11.2 is installed in/opt/oracle/instantclient_11_2 with the symbolic link.
  
  envvars:
  LD_LIBRARY_PATH = / opt/oracle/instantclient_11_2
  ORACLE_HOME = / opt/oracle/instantclient_11_2
  ORACLE_BASE = / opt/oracle/instantclient_11_2
  
  PHP and the oci8 module set the charge.
  
  phpinfo(); output:
  
  OCI8
  OCI8 Support enabled
  Version 1.4.6
  Revision $Revision: $313688
  Persistent connections active 0
  Active connections 0
  Oracle Client Run-time Library Version 11.2.0.2.0
  Oracle Instant Client Version 11.2
  A temporary Lob support is enabled
  
  When we discover everything first a site there is no problem but very random, we get the following error:
  
  OCIEnvNlsCreate() failed. There is a problem with your system - please check LD_LIBRARY_PATH includes the directory with Oracle Instant Client libraries*.
  
  but when we use echo getenv ("LD_LIBRARY_PATH"); in php, the output is "/ opt/oracle/instantclient_11_2.
  
  now, the strange, that it's as random as it appears he disappears we can load the web page without a problem and after a few clicks of the error is back. If we wait for a cup of seconds you can reload the page and it loads normally.
  The error seems to be random and we get it over and over again, it comes and goes after a cpl of pages are read. It seems to appear more when there are multiple users browsing the Web site.
  
  Is there any solution for this? is this a known bug? It seems strange that the instant client works sometimes and fails a second later without a change in the system.
  Hope someone can help us.
  
  Published by: user10978378 on Sep 3, 2011 04:20

  Action of the host:
  This message has been moved to the Solaris 11 forum the Forum of the OIC for reconciliation of the subject.
  The Solaris forum readers won't have a clue as to the nuances of the OIC.

• FMS 4.5 Streaming HDS of no default location

  We have 4.5 FMS, installed in the usual location on the c: to a server.

  We want to store video content in E:\Videos vod with subfolders for different sets of content. our test uses a subfolder with videos and a file manifest.  The manifest looks like this:

  ------------------------------------------------------------------------------------------ ------

  "< manifest xmlns ="http://ns.adobe.com/f4m/2.0">."
  
  "< media href ="... / hds-vod/test/sample1_150kbps.f4v.f4m "bitrate ="150"/ >".
  
  "< media href ="... / hds-vod/test/sample1_500kbps.f4v.f4m "bitrate ="500"/ >".

  "< media href ="... / hds-vod/test/sample1_700kbps.f4v.f4m "bitrate ="700"/ >".

  "< media href ="... / hds-vod/test/sample1_1000kbps.f4v.f4m "bitrate ="1000"/ >".

  "< media href ="... / hds-vod/test/sample1_1500kbps.f4v.f4m "bitrate ="1500"/ >".

  < / manifesto >

  ------------------------------------------------------------------------------------------ ---------

  We have a site with videos by using the following syntax:

  ------------------------------------------------------------------------------------------ --

  Single bitrate

  "url =" + hostname + "/ hds-vod/test/Cars_Edited_Demo.mp4.f4m" + link + '& type = httpsingle' (that works)

  Flow binary multi

  "url =" + hostname + "/ vod/test/hds_sample1_manifest.f4m" + link + '& type = httpmbr' (who doesn't)

  --------------------------------------------------------------------------------------

  The Apache error_log shows this:

  ------------------------------------------------------------------------------------------ ----------------

  [Fri Mar 02 15:47:08 2012] [error] mod_f4fhttp [404]: E:/Videos/hds-vod/test/sample1_150kbps.f4v.f4m does not exist

  [Fri Mar 02 15:47:08 2012] [error] [client 172.31.0.105] File does not exist: C:/Program Files/Adobe/Flash Media Server 4.5/webroot/vod/hds-vod, referer: http://demo.atomwide.com/vc3test/swfs/adobedemoplayer_pc.swf

  [Fri Mar 02 15:47:08 2012] [error] mod_f4fhttp [404]: E:/Videos/hds-vod/test/sample1_500kbps.f4v.f4m does not exist

  [Fri Mar 02 15:47:08 2012] [error] [client 172.31.0.105] File does not exist: C:/Program Files/Adobe/Flash Media Server 4.5/webroot/vod/hds-vod, referer: http://demo.atomwide.com/vc3test/swfs/adobedemoplayer_pc.swf

  [Fri Mar 02 15:47:08 2012] [error] mod_f4fhttp [404]: E:/Videos/hds-vod/test/sample1_700kbps.f4v.f4m does not exist

  [Fri Mar 02 15:47:08 2012] [error] [client 172.31.0.105] File does not exist: C:/Program Files/Adobe/Flash Media Server 4.5/webroot/vod/hds-vod, referer: http://demo.atomwide.com/vc3test/swfs/adobedemoplayer_pc.swf

  [Fri Mar 02 15:47:08 2012] [error] mod_f4fhttp [404]: E:/Videos/hds-vod/test/sample1_1000kbps.f4v.f4m does not exist

  [Fri Mar 02 15:47:08 2012] [error] [client 172.31.0.105] File does not exist: C:/Program Files/Adobe/Flash Media Server 4.5/webroot/vod/hds-vod, referer: http://demo.atomwide.com/vc3test/swfs/adobedemoplayer_pc.swf

  [Fri Mar 02 15:47:08 2012] [error] mod_f4fhttp [404]: E:/Videos/hds-vod/test/sample1_1500kbps.f4v.f4m does not exist

  [Fri Mar 02 15:47:08 2012] [error] [client 172.31.0.105] File does not exist: C:/Program Files/Adobe/Flash Media Server 4.5/webroot/vod/hds-vod, referer: http://demo.atomwide.com/vc3test/swfs/adobedemoplayer_pc.swf

  ------------------------------------------------------------------------------------------ ---------------

  and the access_log shows this:

  ------------------------------------------------------------------------------------------ ----------------

  172.31.0.105--[02/Mar/2012:15:46:49 + 0000] "GET /hds-vod/test/Cars_Edited_Demo.mp4.f4m HTTP/1.1" 206 1857 "http://demo.atomwide.com/vc3test/index.html""Mozilla/5.0 (Windows NT 6.1; "WOW64) AppleWebKit/535,11 (KHTML, like Gecko) Safari/535,11 of Chrome/17.0.963.56"

  172.31.0.105--[02/Mar/2012:15:46:50 + 0000] "GET crossdomain.xml HTTP/1.1" 200 188 "http://demo.atomwide.com/vc3test/swfs/adobedemoplayer_pc.swf" Mozilla/5.0 (Windows NT 6.1";" "WOW64) AppleWebKit/535,11 (KHTML, like Gecko) Safari/535,11 of Chrome/17.0.963.56"

  172.31.0.105--[02/Mar/2012:15:46:50 + 0000] "GET /hds-vod/test/Cars_Edited_Demo.mp4.f4m HTTP/1.1" 200 1857 "http://demo.atomwide.com/vc3test/swfs/adobedemoplayer_pc.swf""Mozilla/5.0 (Windows NT 6.1; "WOW64) AppleWebKit/535,11 (KHTML, like Gecko) Safari/535,11 of Chrome/17.0.963.56"

  172.31.0.105--[02/Mar/2012:15:46:51 + 0000] "GET /hds-vod/test/Cars_Edited_Demo.mp4Seg1-Frag1 HTTP/1.1" 200 3120800 "http://demo.atomwide.com/vc3test/swfs/adobedemoplayer_pc.swf" Mozilla/5.0 (Windows NT 6.1";" "WOW64) AppleWebKit/535,11 (KHTML, like Gecko) Safari/535,11 of Chrome/17.0.963.56"

  172.31.0.105--[02/Mar/2012:15:46:52 + 0000] "GET /hds-vod/test/Cars_Edited_Demo.mp4Seg1-Frag2 HTTP/1.1" 200 2859182 "http://demo.atomwide.com/vc3test/swfs/adobedemoplayer_pc.swf" Mozilla/5.0 (Windows NT 6.1";" "WOW64) AppleWebKit/535,11 (KHTML, like Gecko) Safari/535,11 of Chrome/17.0.963.56"

  172.31.0.105--[02/Mar/2012:15:46:55 + 0000] "GET /hds-vod/test/Cars_Edited_Demo.mp4Seg1-Frag3 HTTP/1.1" 200 2645168 "http://demo.atomwide.com/vc3test/swfs/adobedemoplayer_pc.swf" Mozilla/5.0 (Windows NT 6.1";" "WOW64) AppleWebKit/535,11 (KHTML, like Gecko) Safari/535,11 of Chrome/17.0.963.56"

  172.31.0.105--[02/Mar/2012:15:46:58 + 0000] "GET /hds-vod/test/Cars_Edited_Demo.mp4Seg1-Frag4 HTTP/1.1" 200 2673502 "http://demo.atomwide.com/vc3test/swfs/adobedemoplayer_pc.swf" Mozilla/5.0 (Windows NT 6.1";" "WOW64) AppleWebKit/535,11 (KHTML, like Gecko) Safari/535,11 of Chrome/17.0.963.56"

  172.31.0.105--[02/Mar/2012:15:47:03 + 0000] "GET /hds-vod/test/Cars_Edited_Demo.mp4Seg1-Frag5 HTTP/1.1" 200 2471283 "http://demo.atomwide.com/vc3test/swfs/adobedemoplayer_pc.swf" Mozilla/5.0 (Windows NT 6.1";" "WOW64) AppleWebKit/535,11 (KHTML, like Gecko) Safari/535,11 of Chrome/17.0.963.56"

  172.31.0.105--[02/Mar/2012:15:47:07 + 0000] "GET /vod/test/hds_sample1_manifest.f4m HTTP/1.1" 200 434 "http://demo.atomwide.com/vc3test/index.html" Mozilla/5.0 (Windows NT 6.1";" "WOW64) AppleWebKit/535,11 (KHTML, like Gecko) Safari/535,11 of Chrome/17.0.963.56"

  172.31.0.105--[02/Mar/2012:15:47:07 + 0000] "GET /vod/test/hds_sample1_manifest.f4m HTTP/1.1" 304 - "http://demo.atomwide.com/vc3test/index.html" "Mozilla/5.0 (Windows NT 6.1. '; "WOW64) AppleWebKit/535,11 (KHTML, like Gecko) Safari/535,11 of Chrome/17.0.963.56"

  172.31.0.105--[02/Mar/2012:15:47:08 + 0000] "GET /vod/test/hds_sample1_manifest.f4m HTTP/1.1" 200 434 "http://demo.atomwide.com/vc3test/swfs/adobedemoplayer_pc.swf" Mozilla/5.0 (Windows NT 6.1";" "WOW64) AppleWebKit/535,11 (KHTML, like Gecko) Safari/535,11 of Chrome/17.0.963.56"

  172.31.0.105--[02/Mar/2012:15:47:08 + 0000] "GET /vod/hds-vod/test/sample1_150kbps.f4v.f4m HTTP/1.1" 404 322 "http://demo.atomwide.com/vc3test/swfs/adobedemoplayer_pc.swf" Mozilla/5.0 (Windows NT 6.1";" "WOW64) AppleWebKit/535,11 (KHTML, like Gecko) Safari/535,11 of Chrome/17.0.963.56"

  172.31.0.105--[02/Mar/2012:15:47:08 + 0000] "GET /vod/hds-vod/test/sample1_500kbps.f4v.f4m HTTP/1.1" 404 322 "http://demo.atomwide.com/vc3test/swfs/adobedemoplayer_pc.swf" Mozilla/5.0 (Windows NT 6.1";" "WOW64) AppleWebKit/535,11 (KHTML, like Gecko) Safari/535,11 of Chrome/17.0.963.56"

  172.31.0.105--[02/Mar/2012:15:47:08 + 0000] "GET /vod/hds-vod/test/sample1_700kbps.f4v.f4m HTTP/1.1" 404 322 "http://demo.atomwide.com/vc3test/swfs/adobedemoplayer_pc.swf" Mozilla/5.0 (Windows NT 6.1";" "WOW64) AppleWebKit/535,11 (KHTML, like Gecko) Safari/535,11 of Chrome/17.0.963.56"

  172.31.0.105--[02/Mar/2012:15:47:08 + 0000] "GET /vod/hds-vod/test/sample1_1000kbps.f4v.f4m HTTP/1.1" 404 323 "http://demo.atomwide.com/vc3test/swfs/adobedemoplayer_pc.swf" Mozilla/5.0 (Windows NT 6.1";" "WOW64) AppleWebKit/535,11 (KHTML, like Gecko) Safari/535,11 of Chrome/17.0.963.56"

  172.31.0.105--[02/Mar/2012:15:47:08 + 0000] "GET /vod/hds-vod/test/sample1_1500kbps.f4v.f4m HTTP/1.1" 404 323 "http://demo.atomwide.com/vc3test/swfs/adobedemoplayer_pc.swf" Mozilla/5.0 (Windows NT 6.1";" "WOW64) AppleWebKit/535,11 (KHTML, like Gecko) Safari/535,11 of Chrome/17.0.963.56"

  ---------------------------------------------------------------------------------------

  These seem to indicate that the maifest file is not to be found.  The fms.ini looks like this:

  -------------------------------------------------------------------------------------

  ###########################################################################
  # fms.ini contains alternative to Flash Media Server variables #.
  # the configuration files. Lines beginning with ' # ' are considered comments.  #
  # A variable substitution is in the form < name > = < value >. All the way to #.
  # the first '=' is considered the substitution variable name and #.
  # everything after the first '=' is considered the substitution value. If #.
  # you want a substitution variable to have beginning or trailing spaces.
  # include double quotes around the value. For example, foo ="bar" #"
  ###########################################################################

  ###############################################################
  # This section contains configurable settings in the Server.xml file #.
  ###############################################################

  # Username admin server
  # For example:
  # SERVER. ADMIN_USERNAME = foo
  #
  SERVER. ADMIN_USERNAME = vc_lgfl

  # Port and Flash Media Admin Server IP address must listen to
  # For example:
  # SERVER. ADMINSERVER_HOSTPORT =: 1111
  #
  SERVER. ADMINSERVER_HOSTPORT =: 1111

  # User Id in which to run the process (Linux only)
  # For example:
  # SERVER. PROCESS_UID = 500
  #
  SERVER. PROCESS_UID =

  # GID in which to run the process (Linux only)
  # For example:
  # SERVER. PROCESS_GID = 500
  #
  SERVER. PROCESS_GID =

  # Key license for Flash Media Server
  # For example:
  # SERVER. LICENSEINFO = XXXX-XXXX-XXXX-XXXX-XXXX-XXXX
  #
  SERVER. LICENSEINFO =

  # LIVE_DIR is the full path of the sample application 'Live '.
  folder # to store any live streams recorded by the server.
  # For example:
  # LIVE_DIR = \applications\live < FMS_Installation_Dir >
  #
  LIVE_DIR = C:\Program Files\Adobe\Flash Media Server 4.5\applications\live

  # VOD_COMMON_DIR is the full path to the sample application "VOD".
  folder # to the storage on demand and progressive download of fichiers.flv/.mp3.
  # File stored in this folder can be listened to and are also available PD.
  # Note: If you use the installation default Apache as a Web server.
  # If you change VOD_COMMON_DIR and please change the document root
  # in the httpd.conf file accordingly.
  # For example:
  # VOD_COMMON_DIR = \webroot\vod < FMS_Installation_Dir >
  #
  #VOD_COMMON_DIR = C:\Program Files\Adobe\Flash Media Server 4.5\webroot\vod
  VOD_COMMON_DIR = E:\Videos

  # VOD_DIR is the full path to the sample application "VOD".
  folder # to store only the fichiers.flv/.mp3 on request. Files stored in
  # This file are not PD-able
  # For example:
  # VOD_DIR = \applications\vod\media < FMS_Installation_Dir >
  #
  #VOD_DIR = C:\Program Files\Adobe\Flash Media Server 4.5\applications\vod\media
  VOD_DIR = E:\Videos

  # The maximum size of the FLV cache, in megabytes.
  # The default is 500 MB.
  #
  SERVER. FLVCACHE_MAXSIZE = 500

  # To start and stop the server HTTP included throughout
  # with FMS.
  #
  SERVER. HTTPD_ENABLED = true

  ################################################################
  # This section contains configurable settings in Adaptor.xml #.
  ################################################################

  # Port (s) and Flash Media Server IP address must listen to
  # For example:
  # ADAPTER. HOSTPORT =: 1935,80
  #
  ADAPTER. HOSTPORT =: 1935

  # IP (address and) that Flash Media Server should proxy port
  # unknown HTTP queries to. Leave blank to disable the transmission by proxy.
  # With no address, specifies a port to localhost.
  # For example:
  # HTTPPROXY. HOST = webfarm.example.com:80
  #
  HTTPPROXY. HOST =: 8134

  ##############################################################
  # This section contains configurable settings in Vhost.xml #.
  ##############################################################

  # Application to the virtual host directory
  # For example:
  # VIRTUAL SERVER. APPSDIR = C:\myapps
  #
  #VHOST. APPSDIR = C:\Program Files\Adobe\Flash Media Server 4.5\applications
  VHOST. APPSDIR = E:\Videos

  ####################################################################
  # This section contains configurable settings Application.xml #.
  ####################################################################

  # List of semicolon delimited paths of research for loading script
  # For example:
  # APP. JS_SCRIPTLIBPATH = C:\scripts; C:\Program Files\Foo\scripts
  #
  APP. JS_SCRIPTLIBPATH = C:\Program Files\Adobe\Flash Media Server 4.5\scriptlib

  ###############################################################
  # This section contains configurable settings in Logger.xml #.
  ###############################################################

  RECORDER. LOGDIR =

  ####################################################################
  # This section contains configurable settings in Users.xml #.
  ####################################################################

  # Enable or disable using HTTP requests to run admin commands.
  # The value "true" to enable, otherwise it will be disabled.  The
  actual orders # allowed for the server admin and admin of the virtual host
  # users can be defined in Users.xml.
  
  USERS. HTTPCOMMAND_ALLOW = true

  ------------------------------------------------------------------------------------------ --

  and the httpd.cong looks like this:

  ------------------------------------------------------------------------------------------ -

  #
  # This is the main Apache server configuration file.  It contains the
  configuration directives # that give the server its instructions.
  # See <URL: http://httpd.apache.org/docs/2.2/> for detailed information.
  # See especially
  # <URL: http://httpd.apache.org/docs/2.2/mod/directives.html>
  # for an analysis of each configuration directive.
  #
  # Please see httpd.conf.orig for the configuration of a default
  # (non - FMS) installation of apache.

  Listen 80

  # If you plan to run FMS as root under linux, you _must_ specify a
  valid user #, to join the sense of mounting FMS, or
  Apache # does not work.
  #
  # If you used the default installation program, person doesn't (or any other
  # user name that you have given to the Installer) will not work.
  #
  # If you are running a developer version in your own home directory,
  # You must use your own username.

  AccessFileName .htaccess
  ServerSignature on
  UseCanonicalName Off
  HostnameLookups Off

  Timeout 120
  KeepAlive on
  MaxKeepAliveRequests 100
  KeepAliveTimeout 15

  ErrorLog logs/error_log
  LogLevel info
  "LogFormat '%%u %t \"%r\ hour' % > s \"%{Referer}i\ %b" \"%{User-Agent}i\" "handset"
  CustomLog logs/access_log combined

  DocumentRoot "... / webroot.

  DirectoryIndex index.html index.html.var index.php index.php3 index.php4 index.php5 index.py index.pl index.rb

  < directory / >
  Options FollowSymLinks
  AllowOverride None
  Order allow, deny
  Allow all the
  Meet all
  < / Book >

  < directory "... / webroot" > ".
  Options - Indexes FollowSymLinks
  AllowOverride None
  Order allow, deny
  Allow all the
  < / Book >

  /Documentation alias... ICID
  < directory... ICID >
  Options FollowSymLinks
  AllowOverride None
  Order allow, deny
  Allow all the
  < / Book >

  
  Alias /icons/ "icons".
  < directory "icons" >
  Options FollowSymLinks MultiViews
  AllowOverride None
  Order allow, deny
  Allow all the
  < / Book >

  /Error/ alias "error."

  ScriptAlias/cgi-bin / "cgi - bin /".
  < directory "cgi - bin" >
  AllowOverride None
  None of the options
  Order allow, deny
  Allow all the
  < / Book >

  </server-status location >
  SetHandler server-status
  Order deny, allow
  Refuse to all the
  Allow from 10.0.0.0/8
  Allow 172.16.0.0/12
  Allow 192.168.0.0/16
  Allow to 127.
  < / location >
  ExtendedStatus on
  </server-info location >
  SetHandler server-info
  Order deny, allow
  Refuse to all the
  Allow from 10.0.0.0/8
  Allow 172.16.0.0/12
  Allow 192.168.0.0/16
  Allow to 127.
  < / location >

  
  < FilesMatch "^ \.ht" > "".
  Order allow, deny
  Refuse to all the
  < / FilesMatch >

  < IfModule mpm_winnt_module >
  ThreadsPerChild 250
  MaxRequestsPerChild 0
  < / IfModule >
  < IfModule worker_module >
  StartServers 2
  MaxClients 150
  MinSpareThreads 25
  MaxSpareThreads 75
  ThreadsPerChild 25
  MaxRequestsPerChild 0
  < / IfModule >

  LoadModule modules/mod_actions.so actions_module
  LoadModule alias_module modules/mod_alias.so
  LoadModule modules/mod_asis.so asis_module
  LoadModule auth_basic_module modules/mod_auth_basic.so
  LoadModule auth_digest_module modules/mod_auth_digest.so
  LoadModule modules/mod_authn_anon.so authn_anon_module
  #LoadModule authn_dbm_module modules/mod_authn_dbm.so
  LoadModule modules/mod_authn_default.so authn_default_module
  LoadModule authn_file_module modules/mod_authn_file.so
  #LoadModule authz_dbm_module modules/mod_authz_dbm.so
  LoadModule modules/mod_authz_default.so authz_default_module
  LoadModule modules/mod_authz_groupfile.so authz_groupfile_module
  LoadModule modules/mod_authz_host.so authz_host_module
  LoadModule modules/mod_authz_user.so authz_user_module
  LoadModule autoindex_module modules/mod_autoindex.so
  #LoadModule cern_meta_module modules/mod_cern_meta.so
  < IfModule mpm_winnt_module >
  LoadModule modules/mod_cgi.so cgi_module
  < / IfModule >
  < IfModule worker_module >
  LoadModule modules/mod_cgid.so cgid_module
  < / IfModule >
  LoadModule dav_module modules/mod_dav.so
  LoadModule modules/mod_dav_fs.so dav_fs_module
  LoadModule deflate_module modules/mod_deflate.so
  LoadModule modules/mod_dir.so dir_module
  LoadModule env_module modules/mod_env.so
  #LoadModule modules/mod_expires.so expires_module
  #LoadModule file_cache_module modules/mod_file_cache.so
  #LoadModule modules/mod_headers.so headers_module
  LoadModule modules/mod_imagemap.so imagemap_module
  LoadModule modules/mod_include.so include_module
  LoadModule modules/mod_info.so info_module
  < IfModule mpm_winnt_module >
  LoadModule modules/mod_isapi.so isapi_module
  < / IfModule >
  LoadModule log_config_module modules/mod_log_config.so
  LoadModule mime_module modules/mod_mime.so
  LoadModule modules/mod_mime_magic.so mime_magic_module
  #LoadModule modules/mod_proxy.so proxy_module
  #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
  Proxy_balancer_module modules/mod_proxy_balancer.so #LoadModule
  Modules/mod_proxy_connect.so proxy_connect_module #LoadModule
  Modules/mod_proxy_http.so proxy_http_module #LoadModule
  Proxy_ftp_module modules/mod_proxy_ftp.so #LoadModule
  LoadModule negotiation_module modules/mod_negotiation.so
  LoadModule rewrite_module modules/mod_rewrite.so
  LoadModule setenvif_module modules/mod_setenvif.so
  Modules/mod_speling.so speling_module #LoadModule
  LoadModule status_module modules/mod_status.so
  LoadModule modules/mod_unique_id.so unique_id_module
  LoadModule modules/mod_userdir.so userdir_module
  #LoadModule usertrack_module modules/mod_usertrack.so
  #LoadModule vhost_alias_module modules/mod_vhost_alias.so
  Modules/mod_ssl.so ssl_module #LoadModule
  LoadModule modules/mod_f4fhttp.so f4fhttp_module
  LoadModule modules/mod_hlshttp.so hlshttp_module
  LoadModule modules/mod_jithttp.so jithttp_module

  ##############################################################################
  # The next section allows caching of Just-In-Time packed # content
  # Use htcacheclean tool to manage the amount of data that are cached on disk. #
  # See Apache documentation for its use.                                    #
  # http://httpd.apache.org/docs/2.2/programs/htcacheclean.html #.
  # Make sure that the directory specified by the CacheRoot directive exists. The #.
  # default is a directory named cacheroot who reports directly to the Apache #.
  Installation directory of #.                                                    #
  # For more information on implementing caching of content, see the Apache documentation.
  # http://httpd.apache.org/docs/2.2/caching.html #.
  ##############################################################################

  # Uncomment this option to activate the cache
  #LoadModule cache_module modules/mod_cache.so
  < IfModule mod_cache.c >
  LoadModule modules/mod_disk_cache.so disk_cache_module
  < IfModule mod_disk_cache.c >
  CacheEnable disk hds - vod
  CacheEnable disk hls - vod
  CacheRoot cacheroot
  CacheMaxFileSize 10000000
  CacheLock on
  < / IfModule >
  < / IfModule >

  
  < IfModule f4fhttp_module >
  < /vod location >
  True HttpStreamingEnabled
  # HttpStreamingContentPath "... / webroot/vod.
  HttpStreamingContentPath "E:\Videos".
  Options - Indexes FollowSymLinks
  < / location >

  # old card style url again (from FMS 4.5), more compact url
  Redirect 301/live/events/livepkgr/events/hds-live/livepkgr

  < location/hds-live >
  True HttpStreamingEnabled
  HttpStreamingLiveEventPath '... / applications.
  HttpStreamingContentPath '... / applications.
  HttpStreamingF4MMaxAge 2
  HttpStreamingBootstrapMaxAge 2
  HttpStreamingFragMaxAge - 1
  Options - Indexes FollowSymLinks
  < / location >
  < / IfModule >

  < IfModule hlshttp_module >
  < location/hls-live >
  True HLSHttpStreamingEnabled
  HttpStreamingLiveEventPath '... / applications.
  HttpStreamingContentPath '... / applications.
  HLSMediaFileDuration 8000
  HLSSlidingWindowLength 6
  HLSFmsDirPath "..".
  HLSM3U8MaxAge 2
  HLSTSSegmentMaxAge - 1

  # Uncomment the following to activate the encryption
  # to this place.
  # Server HLSEncryptionScope
  # HLSEncryptCipherKeyFile "... / phls/liveeventkey.bin.
  # HLSEncryptKeyURI "https:// < ServerName > /hls-key/liveeventkey.bin.

  Options - Indexes FollowSymLinks
  < / location >

  < hls - vod location >
  True HLSHttpStreamingEnabled
  HLSMediaFileDuration 8000
  # HttpStreamingContentPath "... / webroot/vod.
  HttpStreamingContentPath "E:\Videos".
  HLSFmsDirPath "..".

  # Uncomment the following to activate the encryption
  # to this place.
  # Server HLSEncryptionScope
  # HLSEncryptCipherKeyFile "... / phls/vodkey.bin.
  # HLSEncryptKeyURI "https:// < ServerName > /hls-key/vodkey.bin.

  Options - Indexes FollowSymLinks
  < / location >

  < / IfModule >

  
  < IfModule jithttp_module >
  < hds - vod location >
  True HttpStreamingJITPEnabled
  # HttpStreamingContentPath "... / webroot/vod.
  HttpStreamingContentPath "E:\Videos".
  JitFmsDirPath "..".
  Options - Indexes FollowSymLinks

  # Uncomment the following to activate the encryption
  # to this place.
  # Server EncryptionScope
  # Doctors ProtectionScheme
  < / location >
  < / IfModule >

  
  TypesConfig conf/mime.types
  MIMEMagicFile conf/magic
  DefaultType text/plain

  AddType video/x-flv-.flv
  AddType video/MP2T .ts

  AddType application/x-compress. Z
  AddType application/x-gzip .gz .tgz
  AddType application/x-mpegurl *.m3u8

  
  AddHandler send-as-is Davis
  AddHandler type-map of the var
  AddType text/html .shtml
  AddOutputFilter INCLUDES .shtml

  < IfModule ssl_module >
  SSLRandomSeed startup builtin
  SSLRandomSeed connect builtin
  < / IfModule >

  < IfModule userdir_module >
  UserDir disable
  < / IfModule >

  < IfModule dav_fs_module >
  DAVLockDB tmp/dav/lockdb
  < / IfModule >

  IndexOptions FancyIndexing VersionSort NameWidth = * HTMLTable
  AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
  Should text (TXT,/icons/text.gif) / *.
  Should (IMG,/icons/image2.gif) image / *.
  Should (SND,/icons/sound2.gif) audio / *.
  Should (VID,/icons/movie.gif) video / *.
  Should (VID,/icons/movie.gif) application/x-shockwave-flash
  AddIcon /icons/binary.gif .bin .exe
  AddIcon /icons/binhex.gif .hqx
  AddIcon /icons/tar.gif .tar
  AddIcon /icons/world2.gif .wrl. WRL.gz .vrml .vrm .iv
  AddIcon /icons/compressed.gif. Z .z .tgz .gz .zip
  AddIcon /icons/a.gif .ai .eps .ps
  AddIcon /icons/layout.gif .html .shtml, .htm, .pdf
  AddIcon /icons/text.gif .txt
  AddIcon /icons/c.gif .c
  AddIcon /icons/p.gif .pl .py
  AddIcon /icons/f.gif .for
  AddIcon /icons/dvi.gif .dvi
  AddIcon /icons/uuencoded.gif .uu
  AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
  AddIcon /icons/tex.gif .DVI
  AddIcon /icons/bomb.gif core
  AddIcon/icons/back.gif...
  /Icons/hand.right.gif AddIcon README
  AddIcon /icons/folder.gif ^ ^ DIRECTORY ^ ^
  AddIcon /icons/blank.gif ^ ^ BLANKICON ^ ^
  DefaultIcon /icons/unknown.gif
  ReadmeName README.html
  HeaderName HEADER.html
  IndexIgnore. ?? * ~ * # Header README RCS CVS *, v *, t

  AddLanguage ca .ca
  AddLanguage cs .cz .cs
  AddLanguage da .dk
  AddLanguage .de
  AddLanguage el Holy
  AddLanguage fr .fr
  AddLanguage eo .eo
  AddLanguage're .es
  AddLanguage and .and
  AddLanguage fr .fr
  AddLanguage he .He
  AddLanguage hr .hr
  AddLanguage it .it
  AddLanguage ja Armsake
  AddLanguage ko .ko
  AddLanguage ltz .ltz
  AddLanguage nl .nl
  . AddLanguage nn nn
  AddLanguage No .no
  AddLanguage pl .po
  AddLanguage pt .pt
  AddLanguage PT - BR .pt - br
  AddLanguage ru .ru
  AddLanguage sv .sv
  Zh - CN .zh - cn AddLanguage
  Zh - TW .zh - tw AddLanguage
  LanguagePriority en ca cs da el eo're and fr he hr it ja no ko ltz nl nn no pl pt pt - BR ru sv zh - CN zh - TW
  ForceLanguagePriority prefer Fallback
  AddDefaultCharset UTF-8

  < IfModule mod_negotiation.c >
  < IfModule mod_include.c >
  < directory "error" >
  AllowOverride None
  Options IncludesNoExec
  AddOutputFilter includes html
  AddHandler type-map of the var
  Order allow, deny
  Allow all the
  LanguagePriority en of are en
  ForceLanguagePriority prefer Fallback
  < / Book >
  < / IfModule >
  < / IfModule >

  BrowserMatch "Mozilla/2" nokeepalive
  BrowserMatch "MSIE 4\.0 b 2;" nokeepalive downgrade - 1.0 force-response - 1.0
  BrowserMatch "RealPlayer 4\.0" force-response - 1.0
  BrowserMatch "Java/1\.0" force-response - 1.0
  BrowserMatch "JDK / 1\.0" force-response - 1.0
  BrowserMatch "Data Microsoft Access Internet Publishing Provider" redirect-carefully
  BrowserMatch "MS FrontPage" redirect-carefully
  BrowserMatch "^ WebDrive" redirect-carefully
  BrowserMatch "^ WebDAVFS/1.» [0123]"redirect-carefully
  BrowserMatch "^ gnome-vfs/1.0" redirect-carefully
  BrowserMatch "^ XML Spy" redirect-carefully
  BrowserMatch "^ Dreamweaver-WebDAV-SCM1 (English)" redirect-carefully

  #Uncomment following to activate https based key service
  #for HLS.
  #Include conf/httpd-hls - secure.conf

  ------------------------------------------------------------------------------------------ -----

  I guess that the problem is an incorrect configuration setting that I simply do not see.  Tips or tricks would be greatly appreciated.

  Hi Peter,.

  All of your settings seem to be fine except for the manifet file. Your directory structure should be E:/videos/test /, your manifest file urls must be:... /.. / HDS-VOD/test/sample1_500kbps. F4V. F4M

  This is because the URLS in the manifest are taken from the url of the manifest file. Thus, when you... / HDS-VOD/test/sample1_500kbps. F4V. F4M, demand will be like hostname+"/vod/hds-vod/test/sample1_500kbps.f4v.f4m but you need individual applications to be hostname+"/hds-vod/test/sample1_500kbps.f4v.f4m

  Please try with your manifest as:

  http://ns.Adobe.com/F4M/2.0">

  Let me know if it helps.

  Thank you

  Apurva

• maximum of 30 minutes with HLS - VOD for iOS device

  Hello

  I'm having a problem with Flash Media Streaming Server 4.5

  When you play a movieclip that is longer than 30 minutes, he plays well if I listen to a flash client, but when I use hls - vod to send it to an Apple device, the player says that the file is long 30 minutes exactly.

  The license should not be the problem since I could distribute 500 flash-clients at the same time a few weeks ago.

  The OS is CentOS 5.5

  Any ideas?

  You should check the configuration of the hls VOD licence.

  Check if your file httpd.conf (apache configuration file), you have a location tag for hls - vod, something like this

  True HLSHttpStreamingEnabled

  HLSMediaFileDuration 8000

  HttpStreamingContentPath '... / webroot/vod.

  HLSFmsDirPath "..".

  Options - Indexes FollowSymLinks

  and there HLSFMSDirPath points to the location of the folder the FMS licenses.

  For example, if you have the file licenses FMS to C:\Program Files\Adobe\Flash Media Server 4.5\licenses

  Then HLSFMSDirPath must be set to 'C:\Program Files\Adobe\Flash Media Server 4.5\'... It may be relative path because it comes in default installation of apache with FMS.

  Restart the server after...

  Thank you

• Admin Console - requires that the user Admin password and user name valid

  I am running FMIS4.5 on CentOS5.5

  FMIS runs and I can connect via Flash Media Encoder.

  Displays and Web administration console: 1111 gives the xml output, however

  During the use of the user and the password in my xml files to connect (tests with ping), I get the error "user Admin password and valid user name required.

  conf/FMS.ini:

  ###########################################################################

  # fms.ini contains alternative to Flash Media Server variables #.

  # the configuration files. Lines beginning with ' # ' are considered comments.  #

  # A variable substitution is in the form < name > = < value >. All the way to #.

  # the first '=' is considered the substitution variable name and #.

  # everything after the first '=' is considered the substitution value. If #.

  # you want a substitution variable to have beginning or trailing spaces.

  # include double quotes around the value. For example, foo ="bar" #"

  ###########################################################################

  ###############################################################

  # This section contains configurable settings in the Server.xml file #.

  ###############################################################

  # Username admin server

  # For example:

  # SERVER. ADMIN_USERNAME = foo

  #

  SERVER. ADMIN_USERNAME = Admin

  SERVER. $admin_password = str34m1ng

  # Port and Flash Media Admin Server IP address must listen to

  # For example:

  # SERVER. ADMINSERVER_HOSTPORT =: 1111

  #

  SERVER. ADMINSERVER_HOSTPORT =: 1111

  # User Id in which to run the process (Linux only)

  # For example:

  # SERVER. PROCESS_UID = 500

  #

  SERVER. PROCESS_UID = 500

  # GID in which to run the process (Linux only)

  # For example:

  # SERVER. PROCESS_GID = 500

  #

  SERVER. PROCESS_GID = 500

  # Key license for Flash Media Server

  # For example:

  # SERVER. LICENSEINFO = XXXX-XXXX-XXXX-XXXX-XXXX-XXXX

  #

  SERVER. LICENSEINFO = #SORRY YOU DON'T GET TO SEE THIS #.

  # LIVE_DIR is the full path of the sample application 'Live '.

  folder # to store any live streams recorded by the server.

  # For example:

  # LIVE_DIR = \applications\live < FMS_Installation_Dir >

  #

  LIVE_DIR = / opt/adobe/fms/applications/live

  # VOD_COMMON_DIR is the full path to the sample application "VOD".

  folder # to the storage on demand and progressive download of fichiers.flv/.mp3.

  # File stored in this folder can be listened to and are also available PD.

  # Note: If you use the installation default Apache as a Web server.

  # If you change VOD_COMMON_DIR and please change the document root

  # in the httpd.conf file accordingly.

  # For example:

  # VOD_COMMON_DIR = \webroot\vod < FMS_Installation_Dir >

  #

  VOD_COMMON_DIR = / opt/adobe/fms/webroot/vod

  # VOD_DIR is the full path to the sample application "VOD".

  folder # to store only the fichiers.flv/.mp3 on request. Files stored in

  # This file are not PD-able

  # For example:

  # VOD_DIR = \applications\vod\media < FMS_Installation_Dir >

  #

  VOD_DIR = / opt/adobe/fms/applications/vod/media

  # The maximum size of the FLV cache, in megabytes.

  # The default is 500 MB.

  #

  SERVER. FLVCACHE_MAXSIZE = 500

  # To start and stop the server HTTP included throughout

  # with FMS.

  #

  SERVER. HTTPD_ENABLED = true

  ################################################################

  # This section contains configurable settings in Adaptor.xml #.

  ################################################################

  # Application to the virtual host directory

  # For example:

  # VIRTUAL SERVER. APPSDIR = C:\myapps

  #

  VHOST. APPSDIR = / opt/adobe/fms/applications

  VHOST. ALLOW all =

  ####################################################################

  # This section contains configurable settings Application.xml #.

  ####################################################################

  # List of semicolon delimited paths of research for loading script

  # For example:

  # APP. JS_SCRIPTLIBPATH = C:\scripts; C:\Program Files\Foo\scripts

  #

  APP. JS_SCRIPTLIBPATH = / opt/adobe/fms/scriptlib

  ###############################################################

  # This section contains configurable settings in Logger.xml #.

  ###############################################################

  RECORDER. LOGDIR =

  ####################################################################

  # This section contains configurable settings in Users.xml #.

  ####################################################################

  # Enable or disable using HTTP requests to run admin commands.

  # The value "true" to enable, otherwise it will be disabled.  The

  actual orders # allowed for the server admin and admin of the virtual host

  # users can be defined in Users.xml.

  USERS. HTTPCOMMAND_ALLOW = true

  Users.XML:

  < root >

  < UserList >

  <!-this tag defines a server administrator. ->

  < username = ' ${SERVER.» ADMIN_USERNAME} ">"

  <!-salted Hash of the password for the administrator of the virtual server. ->

  < password encrypt = "false" >$ {SERVER. $admin_password} < / password >

  <!-this administration cannot connect to the server of the-> specified

  <!-hosts. This is specified as a comma-delimited list.

  <!-host names or domain names and/or (full or partial) IP->

  <!-addresses. For example,-->

  <!-"foo.yourcompany.com, macromedia.com, 10.60.1.133, 10.60" - >

  <>allow all < / allow >

  <!-this admin is unable to connect to the server from all the...

  <!-specified hosts. This is specified as a list by commas->

  <!-the name of host or domain names and/or IP (full or partial) - >

  <!-addresses. For example,-->

  <!-"foo.yourcompany.com, macromedia.com, 10.60.1.133, 10.60" - >

  < deny > < / nie >

  <!-specifies the order in which evaluate < Allow > and ->

  <!-< Deny > tags. This can be 'Allow, Deny' or 'Deny, Allow '. The - >

  <! - default is 'Deny, Allow', which means that access is allowed - >

  <!-unless specified in < Deny > < Allow > and not.     ->

  < order > allow, deny < / order >

  < / user >

  < user name "janedoe" = >

  < password encrypt = "false" > S4mpl3P4ss < / password >

  allow <>< / allow >

  < deny > < / nie >

  < order > allow, deny < / order >

  < / user >

  < / UserList >

  < AdminServer >

  < HTTPCommands >

  <!-turn on or off using HTTP requests to run admin commands.     ->

  <!-set "true" to enable, otherwise it will be disabled.  The - >

  <! - actual orders allowed for server admin and admin of the virtual host - >

  <!-users can be defined in allow it and deny elements.                                   $

  < activated >$ {USERS. HTTPCOMMAND_ALLOW} < / activate >

  <!-list orders admin server accessible through HTTP.         ->

  <!-add several commands separated by commas.  'All' indicates->

  <!-all orders (it is not recommended to allow orders).          ->

  <!-Separate multiple commands with commas.                              ->

  Ping < Allow > < / allow >

  <!-list of orders admin server refused access via HTTP.                ->

  <!-add several commands separated by commas.  'All' indicates->

  <!-all orders.                                                       ->

  < deny > all < / deny >

  <!-processing order for refuse and allow command lists.  'Deny, allow' - >

  <!--means that the command will be permitted if the order is allow-->

  <!-list or not in the deny list.   'Allow, Deny' means the--> command-line

  <!-will be allowed if it is in the allow list and not in the - >

  <!-list of deny.                                                           ->

  < order > deny, allow < / order >

  < / HTTPCommands >

  < / AdminServer >

  < / root >

  Exit the: admin/1111/ping? auser = Admin & apswd = str34m1ng:

  < result >

  errorof the < level > < / level >

  < code > NetConnection.Connect.Rejected < code >

  < description > Admin user requires valid user name and password. < / description >

  < timestamp > Thursday, May 17, 2012 11:33:43 AM EDT < / timestamp >

  < / result >

  Links do not work for localhost and external connections and the fms_adminConsole.htm (.swf) fails as well.

  Any help is appreciated!

  Hey Jon,

  Please take a look at this. Should help.

  http://forums.Adobe.com/message/4346847#4346847

  Thank you.

• R12 on HP-UX Itanium Setup error

  Post installation check
  Following tests failed
  HTTP
  Virtual directories
  Help
  JSP
  Login page
  
  Description of the error
  check the URL = http://inkolhp7.tcs.com:8000
  RW-50015: error:-HTTP listener does not. The service may not be started on the port again. Please check the service and use the button try again.
  
  Please help me
  
  Published by: Dev on January 17, 2011 11:49

  Please see the installation log files because "RW-50015" is a generic error. This error is mainly due to lack of packages of OS pre - req., so please check that you have installed everything according to the instructions (Oracle E-Business Suite Installation and upgrade 12 Release Notes (12.1.1) for HP - UX Itanium [762891.1 ID]).

  In addition, please see these docs.

  R12 Post Installation steps: Apache fails: RW-50015 cannot load Libphp4.So, unresolved symbols [ID 736689.1]
  Fresh R12 Installation fails with RW-50015 [ID 452101.1]
  Postinstall R12 Rapidwiz step Http, JSP, help page, connection, the virtual directory page fails [414414.1 ID]

  Thank you
  Hussein

• ColdFusion Launcher does not accept the password when you try to change the web server

  I know this will sound stupid as wrong password is a password wrong, right? Well I swear I know my passwords and it's not having it.

  I am running coldfusion 9 and I want to change the default internal server that I put it to the top with the installation on apache server that ships with mac OS x. So I started the coldfusion launcher and clicked the button Web server connection utility to set up, he asks a password to continue, but usually accept it... I tried both of the passwords that I use for stuff course where I was confused which it requested one, but is not having either.

  I tried to change the password for the coldfusion administrator and still no joy. I know that sounds stupid, but I do not understand... How can I get if she does not accept my admin password... I have tried uninstall and try again once like stuff as it is a nightmare to get rid of my experience... always leaves a file somewhere that you can never seem to isolate who mucks upward following installation so I left it for the moment. Anyone got any ideas?

  OK, you cannot double-click the wsconfig file, cause, then you are not running it as sudo, so you will not be allowed.  'sudo' is 'Super user' and allows you to run a program, temporarily, as a super user.  If you do that you won't have permission to edit the httpd config file.

  Try the following.

  Launch the Terminal

  type: cd/Applications/ColdFusion9/runtime/lib (change the correct path if it is not the path to your ColdFusion)

  Press enter

  type: sudo java-jar wsconfig.jar

  Press enter

  It should ask you for your password. Enter it and press ENTER again.

  It should launch the configuration tool, this time with the appropriate permissions to modify the file httd.conf.

  Good luck