Installation of extensions .zxp script pour CC and CS
Hello
We have in our computer equipment, configurations MacOS containing both of the CC2014 (pour InDesign) and CS6 (pour Photoshop and Illustrator).
The installer we need fairly regularly and update of extensions .zxp on these posts.
Pour CELA, we install the extension a first time with Adobe Extension Manager CC2014 pour InDesign, then a second time with AEM CS6 pour Photoshop and Illustrator.
This type of configuration for more than 200 posts and it becomes quite solo to install manually.
I would like to know if it was possible to deploy these extensions remotely by creating a script for example.
The but is of course to be able to install on the same machine, the same extension on both CC and CS versions.
We mainly use the MacOS 10.10 and 10.11.
For deployment, we currently use Apple Remote Desktop.
Thank you in advance pour your help.
Rodrigues
OK, I found:
Pour the CS6:
"' / Applications/Adobe Extension Manager CS6/Adobe Extension Manager CS6.app/Contents/MacOS/Adobe Extension Manager CS6" - remove - install zxp="/Path.To.Extension/Extension.zxp" "
Pour the CC:
"/ Applications/Adobe Extension Manager CC/Adobe Extension Manager CC.app/Contents/MacOS/ExManCmd '-install ' / Path.To.Extension/Extension.zxp '.
The ticket can be closed.
Thank you.
Tags: Creative Suites
Similar Questions
-
I bought the version of illustrator, installs all OK but when I get to pour Acceptor and pour the launching program... nothing happens and the acceptance window comes up.
Valoucb,
If it please try to close the following processes and restart the Illustrator application (as an administrator if you are using windows).
- CreativeCloud
- Adobe CEF Helper"
- Service Office of Adobe
- AdobeIPCBroker
- Creative cloud
- Installation of Adobe
- AdobeUpdateDaemon
- AdobeServiceInstaller
- AAM Update notify
- CCLibrary
- node
- The basic clock
- All other Adobe applications.
Please make sure that you are connected to creative cloud with your ID (which has got subscription) correct Adobe and I suggest you to check: cannot launch Adobe Creative Cloud app test to check the permissions on the required folder and try to reinstall the applications.
In case you need help, please share the screenshot of the message and the version of the OS, so that we can help you properly.
-
Hello
After installing several updates, I find several errors in the error log:
"Installation issues updated: Code U44M1P7 in Extension Manger 6.0.4 and Illustrator and PS CS6.
I use a Mac Book Pro with the retina and MAC OSX 10.7.5.
What is the problem and how can I solve it?
Best regards
Frank
Follow the instructions at the following link:
http://helpx.Adobe.com/Creative-Suite/KB/error-u44m1p7-installing-updates-CCM.html
-
Hey there. I installed a new version of Netbeans and he asked me to import files, resources, etc. from the old version, so I agreed. However, when I open the old version that I realized all JavaFX projects contained errors. Then I open the properties of the project-> libraries section, it says broken reference: javafx.classpath.extension in the compile tab. I don't know why I'm dealing with this error, but I guess the reason is that I installed the latest version of Java with the new Netbeans import process caused what is happening. I would appreciate for any relpy. Thanks anyway
EDIT: I'm impossible to import the screenshot, so you can see the same issue here
EDIT 2: Here you can also see the UPDATE: TXT file after you have installed the new Netbeans
==================================================
JavaFXApplication1_1_Optimize update build script
==================================================
Project build script file jfx - impl.xml in the nbproject subdirectory has not been recognised
compatible with this version of NetBeans JavaFX supports the module. To ensure proper
and all the features within this installation of NetBeans, the script file has been
saved on jfx - impl_backup_3.xml and then updated to the State currently supported.
FX Project build script auto-implementation to date can be triggered on the project to open after
Updated NetBeans installation or manual changes in jfx - impl.xml. Please note that
It is not recommended to change jfx - impl.xml to hand. Any customization of building code should
be placed only in build.xml in the root directory of the project.
Note: The automatic update mechanism can be disabled by setting the property
JavaFX.Disable.AutoUpdate = true
Automatic opening of the present notification when the project files are updated can be disabled by setting the property
JavaFX.Disable.AutoUpdate.notification = true
(in build.properties, private.properties ot project.properties).
Note: The nbproject/jfx-impl_backup files * .xml and the nbproject/updated updated file. TXT
are not used when you build the project, and can be freely removed.
OK guys, I solved it with the way I opened a project new and imported complete documents to the new project.
-
I have Windows Vista with Service Pack 2 installed on my system. I am trying to install a small program. The installation process starts, but soon, I get the following error message: Error 1720: there is a problem with this Windows Installer package. A script required for this intall to complete could not be run... How can I solve this problem?
Try the steps mentioned in the answers marked by kmlure and Imran Chand at the following link: http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/error-1720-there-is-a-problem-with-this-windows/0b965fe8-2d16-498c-bb88-395911e13146
If you have downloaded the program, you can try to download it again or check if there is a different place, you can download it since the file itself is not the problem.
-
I have Windows Vista (with Service Pack 2) installed on my system. I am trying to install a program called HotDocs. HotDocs is a document generation program. The installation process is arrested shortly after it starts and I get the following error message:
Error 1720. There is a problem with this installation package. A script required for this install to complete could not be run. Contact your provider to support personal or package. Custom action script error,: line, column,.
I tried to use msconfig to determine if any service could interfere with the Windows Installer (none appeared to be - their judgment has not solved the problem of turing), run the installation as an administrator, and help from Microsoft 'Fix It' Troubleshooting Guide (for installation problems), but none who has eliminated the problem. I also contacted the HotDocs seller and they had no solution for the problem and have not all reports other customers that their program was causing a problem.
Other solutions to this problem?
Thank you!
Hello
1. did you of recent changes to the system?
2. do ths problem occurs when you try to install another program?
3 did you perform the clean boot completely?
Follow the steps mentioned below and check if that helps.
Step 1:
Follow the steps from the link below and check if that helps.
http://support.Microsoft.com/kb/2438651
Step 2: Perform a clean boot
If you have not completely run the clean boot, try to make it completely.
Follow the steps in the link below to perform the clean boot.
http://support.Microsoft.com/kb/929135
Note: once you are done with the boot, follow step 7 in the link to your computer in normal mode.
It will be useful.
-
Original title: problem with the Windows Installer Package
I am trying to install an update for my video FlipShare program and I get the following error message "there is a problem with this Windows Installer package. A script required for this install to complete could not be run. Contact your provider to support personal or package. Anyone has any ideas to fix this?
Would be - what your anti-virus program blocks scripts? See:
Error a Script required for this install to Complete could not be run when you run a Microsoft Fix it Solution! -Microsoft Fix it BLOG - Site Home - TechNet Blogs:
http://blogs.technet.com/b/fixit4me/archive/2009/03/31/error-a-script-required-for-this-install-to-complete-could-not-be-run-when-running-a-Microsoft-fix-it-solution.aspxRamesh Srinivasan . The Winhelponline Blog
Microsoft MVP, Windows desktop experience -
My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it does not work either.
This general situation may be similar to what is mentioned in this sequel to thread of the CSA
and if the remedy is to use instructions; detailed and I hope they are correct...
Re: Restart fails after installation of El Capitan help!
Or you can try and see on the repair of the system and then if your disk utility can
See the Macintosh HD, as a boot volume, you could restart from OS X Recovery to
the Mac system, to see if this solves the problem. There may be more than one cause.
You could try and boot into OS X Recovery, utilities out there, and other options are available.
• OS X: on OS X Recovery - Apple Support
This example uses a special partition on the hard drive of recovery which is not in the
same disc that the Mac OS X section; However if your hard drive is missing, these other
items may also be at risk. You must have and maintain backups of your duplicate content
on the external storage drives closed; In addition, a Time Machine backup helps to restore.
• Apple OS X and Time Machine tips:
http://pondini.org/OSX/home.html
• Tips for OS X - using HD recovery:
http://pondini.org/OSX/RecoveryHD.html
{Using the utility disc and other tools can be done from the boot OS X Recovery volume
Beware of the fact these tools can also delete or reformat your content; wiping.}
Don't know what to say; you could see visiting an Apple store with genius if
There is an official store. Usually for best time planning you would contact them for an appointment.
- Make an appointment at an Apple Retail Store Genius Bar
- Find an Apple authorized service provider
- https://locate.Apple.com/country - Apple - find places - selector of country (if outside the U.S.)
Or if there is no official retail Apple Store with genius, the following suggestion would be to contact
a service provider authorized Apple, an independent specialist who is qualified in the repair of Apple.
In any case...
Good luck & happy computing!
-
XP Reinstall or repair the installation, all the keys show as zero and will not turn on!
I do installs repair and re - installs several PCs in the last days, and none of the license keys are coming as valid, though even I am sure they are (the PC came directly from Dell).
Now, I have one, I did a repair install, though I have the correct cd (oem, oem cd installation), the key showed as not valid for repair so I used the public keys of http://technet.microsoft.com/en-us/library/bb457096.aspx to complete the installation.
Now, however, I can not connect to Windows. It won't let me open a session as long as I go through the product activation and activation says that my (valid) key is not valid! I would use the key update tool, but cannot connect to use it!
It said that the key which is on my COA which has been on the Dell PC is not valid? It's a bit infuriating. The first couple I gave up and used nine keys of unopened copied of XP that I have, but I'm out of those now and in any case the old keys must be still valid! Unless MS is turn off old keys to sell more. Seems pretty shady to me.
More information is needed, such as:
1. is the Dell keys to products for Windows XP Home Edition or Windows XP Professional?
2 is the OEM Windows XP CD, you are using a Windows XP Home Edition or a version of Windows Professional?
3. what level of Service Pack is installed on the CD that you are using? 1, 2 or 3?
4. have you tried to use the Windows product key update tool ?
5. have you ever tried to activate by phone: How to activate Windows XP by phone
Carey Frisch
-
Hey its jake here
I am trying to download Adobe Premiere Pro cc that I download the free trial version of double click on the installer of creative cloud she gets up and wants that connect you using a user name and password? I don't remember all account, I had to do when I connected to Adobe was the first and last name.
you need an adobe (valid email) ID / pass to download the application of office cc, https://creative.adobe.com/products/creative-cloud
don't forget either.
When installing on a mac, you will be prompted for the password of your mac.
-
Running CC of Photoshop and Lightroom CC on a MacBook Pro (with CS5/Adobe Bridge).
Adobe Bridge broke so I uninstalled the full program of CS5 and when I try to reinstall from the CD, I get the dreaded installation met an error(-1) during installation. If please restart the computer and try again. "message.
Have not been able to find a solution for the moment. Any help would be greatly appreciated,
Thank you!
[Duplicate message deleted... post the same question more than once is confusing... MOD]
[This is an open forum, not a direct line to Adobe support... you have to wait a response]
Maybe it's a fake because of Mac El Capitan and OLD programs error
This information is a MUST to install old programs on Mac El Capitan
-You can't get the same error message, but these two links will help with older programs
Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)
-also a TEMPORARY security change https://forums.adobe.com/thread/2039319
FAQ on the Mac 10-11 https://forums.adobe.com/thread/1979303
-
New Tablet IPad pour Lightrom and Photoshop software
Hello
Sera you it is possible to use the new Tablet IPad pro with son color to make corrections on an iMac of table as a Wacom tablet pour Lightrom and Photoshop software?
Thank you for the answer.
Michel
Hi michelg,
New iPad Tablet cannot work as Wacom for Lightroom and Photoshop.
But you can install the following touch applications and can synchronize your work to the desktop version of Photoshop and Lightroom through creative cloud.
- Adobe Photoshop Fix
- Adobe Lightroom for Mobile
- Adobe Photoshop Mix
Although I found something on the internet saying Astropad created by the former Apple engineer who can convert your iPad or iPhone to a graphics tablet, but it's something not official supported by Adobe.
The Astropad for iPad | Graphics tablet app
Concerning
Sarika
-
I just switch to CC to photographers. I downloaded and uninstalled Manager creative cloud several times and whenever I do tab apps under creative cloud wrote "the installation is no longer functional. Uninstall and reinstall... I continue to do this with the same results
Please follow the steps below.
- Follow the Solution 1 and 2 of error: "unable to install". Creative Office Cloud
- Install Creative Cloud Desktop Application using Download Adobe Creative Cloud apps | Adobe Creative Cloud free trial
Hope this will help you.
Kind regards
Hervé Khare
-
MacBook pro with bootcamp (pour windows and osx on mac of LUNS)
Hello
I have a macbook pro with bootcamp (pour windows and osx on mac LUN) must I purchase two licenses?
Thanks for your reply.
Xavier
Hi,
Adobe CC license can be activated on 2 machines using the same Adobe ID, but can be used only 1 at a time.
Reference: licenses and terms of use | Adobe
Kind regards
Sheena
-
After you have installed Windows 10, I can no longer create a PDF of my program Pagemaker 7.0.1. Purchased Acrobat DC, but still no joy. Apparently, Acrobat PDF maker does not recognize the .pmd extension. I get errors and various suggestions, but nothing works. WHAT?
Print to Adobe PDF? Why the * & ^ * & ^ V_ $ didn't pay a lot more money to Adobe for an Adobe program that does not work with another Adobe program? Oh, right--they want to move me up (buy) the new Adobe graphics programs. I'll keep sweating this point and will no doubt wind up forking over a thousand$ $$ or so for 'new' stuff I don't need.
Maybe you are looking for
-
How to clean up after XcodeGhost malware (iPhone)?
Hi all How can you clean up after XcodeGhost on iPhone (not jailbroken)? I had one of the applications... If I reset to factory settings, how do I re - import my contacts with a backup or other means without the malware again? The infected applicatio
-
Satellite M40 won't boot bootable CD or DVD
My Satellite CD or bootable DVD won't boot.I started before but now it won't.I tried taking into C, change the settings of the bios and F12. When I C it's a wit black screen a '_' who will blink for a few seconds, drive begins to spin but then window
-
Unable to download the Service Pack in Windows XP
I have Windows XP and download problems. It has been said that I have service pack 2 and service pack 3 required. can anyone help? Original title: Windows XP
-
Quotazione di garazia [CF] extension request
Few need di quotare extension di co by server DELL PowerEdge r.620 of the United Nations S/N 7RYJ9X1 Fatemi sapere is avete di altre information need Saluti EC Consulting Srl
-
So this just happened out of nowhere because my sound was fine yesterday and all the days before that. I don't hear anything I tried to uninstall the driver and restart my laptop and redownloading to the pilot. nothing works. I tried the recovery thi