installation of Flash 11 problem 'demand currently in use'

Similar Questions

• Registry during the installation of Flash Player problems

  Hi, first, sorry for the spelling errors, I'm Argentinian . I write here because I have tried MANY ways and solutions to install Flash Player for IE, here a few facts:
  

  I mainly use Google Chrome, which has the PC already installed, but I have a problem with the ActiveX control, I can install Flash player 11 for windows but not ActiveX... I read that it is a tool for IE, so I thought that I wouldn't be needing, but when I tried to run a program (game Ranger) he said I had need of ActiveX control and that I had not in my computer... So I started to search for solutions, etc etc, and ultimately abandon it because I just couldn't do it, but right now I did it again because I want to know if it's something important to have...

  The problem during the installation is the following: it starts to download the Flash Player... then install it and when it is at 51%, it stops and a message appears saying: registry error. It's what happens when I try to install ActiveX, not Flash Player itself, because as I said above I can install...

  All I want to know is if he remains the path to allow the installation of Flash Player change the values of registry... because I think that's the main problem... I think so. Thank you for reading.
  
  Edit: I forgot to say my system information.

  OS: Windows 7 32-bit
  

  FINALLY FOUND THE SOLUTION!

  That's where I found it > http://forums.adobe.com/message/4086663#4086663

  Finally, after 6 months, I installed ActiveX, thanks to this person than the fixed

  in any case, I am grateful to you guys, I've been impressed with the speed that you have answered my question, thank you very much.

• I had to reinstall all my programs and data to a new disk, the old crashed. During the installation of Flash Player, I can't go any further than the password stage as he rejects. Again the username and password have been accepted without any problem to ac

  I had to reinstall all my programs and data to a new disk, the old crashed. During the installation of Flash Player, I can't go any further than the password stage as he rejects. Again the username and password have been accepted without any problem to access Adobe.

  Strangely the same problem occurs when I try to install and older version of Lightroom 4.

  Can you help me?

  Hello

  It is the OS, not Flash drive, to ask for the password.  Please refer to the FAQ what userid & password I need to install Flash Player? for assistance.

  --

  Maria

• It didn't install the package when I download the Flash Installer. Are there problems with Adobe?

  It didn't install the package when I download the Flash Installer. Are there problems with Adobe?

  I don't know what you've downloaded; Try

  • Flash Player ActiveX (Internet Explorer)
  • Flash Player plug-in (all other browsers)
  • Flash Player for Mac OS X

• Installation of Flash builder 4 has somehow broken my launch of running/debugging/profiling of flex builder 3.

  After installing Flash builder 4 neither to him nor to flex builder 3 has been able to launch flex swf:s. After hitting to run or debug flex gives a prompt saying "Flash Player is not found. Flex builder cannot locate the required version of Flash Player. You need to maybe install Flash Player 9 or reinstall Flex Builder. Do you want to try to run your application with the current version? ». The popup itself happened before the installation of flash builder 4. But normally I would hit just Yes and he would use any flashplayer is default.

  Now, if I click Yes it launch command prompt with a path to the installation folder of flex 3 Builder. When running flash builder 4, same happens except the path is the folder of installation of flash builder 4. Flex then begins waiting for connection of the debugger, and after awhile, he invites a timeout message. The title of command prompts is... \workspace\project\bin-debug\filename.swf.

  When you open the SWFs directly from windows, they open fine.

  I used the uninstaller for flash player software and recovered both fp9 & 10 and reinstalled the. That did not help. When we browser everything works fine, the problem occurs only when you launch standalone player. I tried to check the registry settings if there is something wrong, but all the flashplayers paths seem to be ok.

  Is there another hope to solve this problem than to reinstall flex builder 3 and flash builder 4 from scratch?

  You need content installed FP debugger

  http://www.Adobe.com/support/flashplayer/downloads.html download from here and install it and you should see the problem go away

  Download the Flash Player 10 ActiveX Windows control content debugger (for IE) (EXE, 2.03 MB)

• RT2870 automatic installation service has reported an invalid current state 0.

  This is my first posting, so be gentle with me

  I discovered that each Windows session seems to result in a record of the event (Event ID 7016) with the description Viewer:

  RT2870 automatic installation service has reported an invalid current state 0.

  I understand that maybe it's something to do with my broadband connection or USB wireless adapter Tenda I should use, but as a non-techie, I'm not really sure.   And I do not know what is the function auto-install RT2870 function is supposed to have to pay.

  Can someone explain how I can deal with the error, please

  Thanks TwoPointOh.

  As the error messages appear do not indicate a problem serious or critical, I'll follow your suggestions at your leisure.

  And thanks for the tips and suggestions.

• Download, installation of Flash Player in IE 11 and 10 Windows

  Change the Message "Hello, I understand that Flash Player is included in Windows for Edge 10. But I downloaded, installed and still using Internet Explorer 11 because my applications do not run on board. Whenever I try to download Flash Player for IE 11 I get the message that Flash Player is included in Windows 10. So I am not allowed to download. ' in the installation of Flash Player

  Post edited by: Dake Williams

  Flash Player is a component integrated IE and Edge on Win10.  There is nothing separate to download or install.  It is much more likely that you are viewing the HTML/Javascript content that does not work as expected when running in the context of EI and edge (i.e. doesn't JavaScript that uses the content provider to detect that Flash is installed directly in IE11).

  First of all, check that the ActiveX filtering is configured to allow Flash content:

  https://forums.Adobe.com/thread/867968

  Internet Explorer 11 and edge have a number of changes both in the way the browser is identified with remote web servers, and how it treats JavaScript for behavior targets specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the provider of content changes their site to conform to the new approach to development required by the modern versions of IE.

  You can try to work around these problems by using the compatibility view:

  http://Windows.Microsoft.com/en-us/Internet-Explorer/use-compatibility-view#IE=ie-11

  If it's too inconvenient, using Google Chrome may be a better alternative.

• I cannot complete the installation of flash player

  I've already started installation, and in the Middle out theres an installation error.

  I closed all the applications from the application manager, and there is still no response.

  Help

  The help pages outlines common troubleshooting steps for the installation of Flash Player. For those who are unable to install by using the online installation programs (which I believe are used in the screenshots above) we also provide 'stand alone' versions of our installers to the bottom of the page. I suspect that these versions of stand alone will help if the troubleshooting steps are not.

  Windows - http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html

  Mac - http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-mac.html

• Can anyone help me pls with 0xc000012f error code during the installation of Flash Player version 11.6.602.180

  Can anyone help me please with 0xc000012f error code during the installation of Flash Player version 11.6.602.180? I tried several times to install to no avail. Thanks in advance.

  Download installer of http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header offline and save it to disk, and then close all browser windows and run the downloaded installer.

• making Adobe flash in problems

  making Adobe flash in problems

  Use the installer of Flash Player 12.0.0.44 (Mac OS X) .

  Follow the steps detailed here: How to perform a "clean installation" of Flash Player in Mac OS X

• Can you please update the link for the standalone installer of flash player?

  Can you please update the link for the standalone installer of flash player?

  Link: http://fpdownload.Macromedia.com/pub/flashplayer/updaters/11/flashplayer_11_plugin_debug_3 2bit.exe

  Source: http://kb2.Adobe.com/de/CPS/191/tn_19166.html#main_ManualInstaller

  Source: http://forums.Adobe.com/thread/889580

  Key of dogs says:

  Source: http://kb2.adobe.com/de/cps/191/tn_19166.html#main_ManualInstaller

  It is an old document (Flash Player 10.3) that should not be there anymore.  (The English document redirects to the link below).

  Download links for installers for FP 11.2 offline are here tall_in_a_firewall_proxy_server_environment http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#Ins

  I've updated the download links for 10.3 FP in http://forums.adobe.com/thread/889580

• Workaround for reader 10.1.2 print number "Duplex installation/printer flashing/bin".

  Dear users,

  We have received feedback from our users related recent problems "Duplex installation/printer flashing/feeder.

  Many of these issues have faced due to the introduction of the setting "Print on both sides" directly on the print dialog box in order to help our users set this option without having to go through the printer properties dialog box. However, we have made this option as WE by default and therefore users have reported problems described above.

  So, please please try unchecking this setting on OFF then print and State to see if that solves the problem.

  Thank you

  Atul Agarwal

  Adobe Systems

  Hello world

  Adobe Reader 10.1.3 is now available. Please update your application, and this problem should be solved.

  Thank you

  Atul

• USB Flash drive problems

  I have a USB key that does not work. It's a drive 8 GB flash USB 3.0 which has been formatted and works on my Macbook Pro. The problem comes when I try to use it on a Windows device.

  When I format it under OSX Extended it appears under Windows but is empty.

  When I format it in FAT, under Windows it says that the device must be formatted first

  Either way, when I go to format the device on Windows it says that is only 200 MB space

  Any help would be appreciated.

  If you want to use a USB flash drive on the cross-platform (Win, Linux, OSX) computers you have the next chance:

  -MS-DOS (FAT) format:

  

  If you want to start the drive on a PC or use it with older versions of Windows, you may also need to set the partition to the Master Boot Record (MBR) for full compatibility Windows scheme:

  • Click the drive, and then select the tab "partition".
  • In the "Layout of the score" dropdown, select "1 Partition".
  • Click on 'Options' and choose "Master Boot Record" as the type of partition, then click 'OK' and 'apply '.

  Format discs very quickly, although the total time required will depend on the size of the drive.

  The file system resulting is compatible with all versions of Mac OS X, Windows 95, 98, Windows XP, Vista, 7, Windows 8, Windows 10, is one of the most widely recognized and usable file system formats. What makes FAT ideal of the file system to use for external hard drives or USB flash drives that are designed for use in environments with multiple operating systems.

  ATTENTION! The main drawback to the use of FAT32 is the file size limit, which limits the files on the drive to be 4 GB in size or less. If you need single files to be larger than 4 GB, use exFAT, even if you lose compatibility with older versions of OS X and Windows.

  -Format in NTFS and use a program like Paragon NTFS on your Mac ($ 15/20).

• Flash playback problems since upgrading to Firefox 40

  I asked yesterday and received no response, so I'm posting again. Here a lot to hear some thoughts on what it is and how I could fix is, so I can update to the latest edition of Firefox. Anyone? Thank you.

  I was invited to move to Firefox 40 today, and as soon as I did, I started to have problems with video playback on YouTube and various other sites. The video has been slow, the sound is distorted. I have the latest version of Flash installed. Everything worked perfectly before the upgrade.

  Just to see, I went down to Firefox 39.0.3 and playback problems disappeared. So needless to say, I will not be upgrading anytime soon. Is this likely a Firefox problem, a problem of Flash, a problem with my computer? I am running Windows XP. Any help, thoughts would be appreciated.

  For future use, if you want to "bump" your message, you can answer yourself, you need not to make a new post.

  https://support.Mozilla.org/questions/1077223

• problem of current password after power on

  same problem on my computer hp mini 110

  problem of current password after plugging... I can't jump say problem

  Please help me...

  My s/n: CNU0082WP2

  Hello

  Enter: e9l11u7d27 (3rd character is a lowercase L)

  Kind regards

  DP - K