installation of memory on toshiba satellite 2710

Similar Questions

• Upgrade memory on Toshiba Satellite L50-B-1NL

  Yesterday, I bought the Toshiba Satellite L50-B-1NL of argos. It came with 4 GB of RAM. I want to upgrade to 8 GB. Does anyone can help with the upgrade process. Will also be empty RAM level warranty.

  Concerning
  SD

  I m not L50 - B owner but I guess that there is no separate access to the modules of memory at the bottom of the unit.
  Right?

  In this case its necessary to remove the plastic cover of the bottom and this will definitely void the warranty!

  If you want to keep the warranty valid, don t update the RAM yourself.
  This must be done by an authorized technician.

• Impossible to use 4 GB of memory on my Satellite A200

  Hello

  I have a little problem!
  I have a Satellite A200-1CR and I want to upgrade my memory to 4 GB.
  After a little research I found that my pc has 2 slots and supports DDR2-667 type with memory memory 4 GB maximum.

  So, I bought two Kingstons KVR667D2S5 / 2G (2 Go DDR2-667) and after reading the manual, I removed the previous 512 MB and I put the new. I started my pc but nothing. Just a black screen!

  I gave my old 512 MB and everything was normal.
  Please if you know something, help me...
  I don't know if it's important, but I use Windows XP Home edition and bios version 5.20.
  Sorry for my English and thanks anyway!

  I haven't tried a single memory every time and everything went normally with 2 GB.
  So, I think, the problem is that the BIOS cannot recognize 4 GB.
  Is it possible to fix this?

  > So, I bought two Kingstons KVR667D2S5 / 2G (2 Go DDR2-667) and after reading the manual, I removed the previous 512 MB and I put the new. I started my pc but nothing. Just a black screen! I haven't tried a single memory every time and everything went normally with 2 GB. So, I think, the problem is that the BIOS cannot recognize 4 GB.
  Do you mean start laptop doesn t more?

  The BIOS is able to handle 4 GB of RAM.
  In my opinion the two modules can not work together. Who knows why?  :|
  I think that you need to replace the modules.

  According to this page, you must use the DDR2 667 MHz (PC2-5300) 200 - PIN SODIMM

  [Memory for Toshiba Satellite A200-1CR | http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=30728&ft=m&st=3]

  Best regards

• Need help with upgrade memory on the Satellite A100-250

  Help me with upgrade memory on TOSHIBA Satellite A100-250 up to 1024 MB.

  I want to buy an another slat memory ddr2-533 512 MB, what model exactly I needed to research, they were working in a pair.

  Sorry for the bad English. From Russia with Love.
  PS. I like to drink Russian vodka :)

  Hay

  Your laptop can be upgraded up to 2 GB and compatible RAM is DDR2 400/533 1 GB (PA3411U-1M1G).

  Use this part number in Google and you will find it.

  Bye and don t drink too much Vodka. ;)

• What memory uses the Satellite A50 112

  My wife has 'lost' the paperwork on this model and need to know the specifications, can anyone help?

  I think that should help you:

  Have a look here:
  [Memory for Toshiba Satellite A50 112 | http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=26424&ft=m&st=3]

  You must use the 200-pin PC2700 (333 Mhz) DDR SODIMM

• Problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT

  Hello!
  I have the problem with Toshiba Software Installer for Win 7 on Satellite L750-1MT (PSK30E-02T002B3) with no preinstalled operating system.
  I do the following:

  1. install Windows 7 x 64 SP1.
  2 Installing the LAN driver (device was not recognized by Windows 6) (downloaded from [http://se.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=SE&LNG=26&userAction=S MP_RESULTS_PAGE & partNumber = PSK30E-02T002B3 & serialNumber = & USER_ACTION = Serial % 20number])
  3. install all updates of Microsoft Windows
  4. run the installer of the software Toshiba for Win 7 - it installs two drivers and then asks to restart.

  Here is the log for the first test (win7update.log) file:

  12\28\2011 update started at 21:11
  TVALZ_O.inf installed
  E/s installed & memory access driver
  driver_bluetooth_TC00241200A.exe/s/log/test has been installed with the result of the PASS code
  util_tvap_TC00215000H.exe/s/log/test /wait15 was installed with the result of the PASS code
  Updated at 21:29

  After the restart I've run it again and the result is:

  12\28\2011 update started at 21:38
  Toshiba Bluetooth stack has already been installed.
  Toshiba value added package has already been installed.
  Updated at 21:40

  Any help is appreciated!
  Thanks in advance!

  Stand by.
  What are you doing exactly?
  You try to install own OS?

• Re: Windows 7 installation error on Toshiba Satellite A300D - 155 PSAKCE

  Hello. I tray to install Windows 7 (64 bit) om my laptop Toshiba Satellite A300D - 155 PSAKCE and in you last step, when installing the update something broken and I saw the blue screen with the error comunicat.

  * Screenschot - last normal installation step
  www.awfsiatka.ugu.pl/images/20100329 (001) .jpg

  * Screenschot - error comunicat *.
  www.awfsiatka.ugu.pl/images/20100329.jpg

  What can I do to install Windows 7 on my laptop?
  I know he's not crazy CD drive or CD player because I was causing install this OS on the other computer and ewerythink was good (successful installation), DVD drive on my laptop, it's also goodworking, because I can copy all the girls of OS disc to my hard drive.
  BIOS on my laptop, it is also updated.
  My real operating system is Windows Vista Home Premium (32 bit)

  Anyone no matter what ide how I can innstal this Windows 7?

  Hello

  Which drive Win 7 you used to install Windows 7 on this laptop?
  Have you tried the Toshiba Recovery disk you created if all goes well before trying to install this OS Win 7?

  Regarding the BSOD:
  It seems that the atikmdag.sys causing this BSOD.
  The atikmdag.sys belongs to the ATI graphics card driver. But I m wondering why this atikmdag.sys causes this problem

• Toshiba satellite which is stuck in the installation of service Pack 1. I have service pack 2, can not fix with this cd, can I install service Pack 2 on it without loss of data or files?

  I have the laptop (Toshiba satellite) friend who's stuck in the installation of the service Pack 1.  I have service pack 2 and am wondering, since I can't fix with this cd, can I install service Pack 2 on it without loss of data or files?

  PC claims service pack1 cd with file asms

  When you use service pack 2 cd can not load product catalogues, it is fatal error, the Setup logs files should contain more information.

  Why not integrate Service Pack 2 and Service Pack 3 on her XP CD by following the instructions here (using another PC):

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/1443.aspx
  Copy all data on an external hard drive, do a clean install using the XP CD updated (preferably on the BIOs)
  Then, install the drivers from the system, then Microsoft Security Essentials, Windows 7 Firewall Control (XP free Version) and Malwarebytes' AntiMalware (free or Pro) or whatever you prefer security.
  Then copy the files over.
  This will probably lead to the best performance.

• My Toshiba Satellite w / 2 GB memory freezes on microsoft corporation spash screen

  My Toshiba Satellite w / 2 GB memory freezes on microsoft corporation spash screen when starting.  This isn't when I boot in safe mode.  I tried the system restore to when it was to start properly, but still crashes at the same place.

  Hello

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• My toshiba satellite is now gel up randomly from the recent installation of windows 8.1!

  * Original title: freeze

  My toshiba satellite is now gel up randomly from the recent installation of windows 8.1!

  Seems to happen, especially when streaming movies but when to check email or whatever.

  It should stop when it happens because keyboard function used.

  What can I do to fix?

  Hello

  See if this helps you improve performance.

  Search for malicious software with the FREE version of this program.

  And does not accept the option "Pay for the version" trial installation

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-8

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Make sure you have the latest updated drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  "How to optimize the performance of Windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/37511-optimize-performance-Windows-8-a.html

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Worth the read as:

  "How to optimize Windows 8.1 for a desktop PC.

  http://www.howtogeek.com/167013/how-to-optimize-Windows-8.1-for-a-desktop-PC/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  " " Performance & maintenance"

  http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And I would check to see if it has damaged system files.

  Each method/step below progresses to another if the first does not all corrupted files which are, etc..

  «Use the System File Checker tool to repair missing or corrupted system files»

  https://support.Microsoft.com/en-us/KB/929833

  _________________________________________________

  And these eightforums.com tutorials are very detailed for the problems resulting from Scan SFC:

  "How to run the command" SFC/scannow"at the start or in Windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html

  Read it in conjunction with the rest of the information they give link above.

  Note

  If SFC could not fix something, then run the new command to see if it can be able to next time. Sometimes, it can take by running the sfc/scannow command 3 times restart the PC after each time completely fix everything what he is capable of.

  If this isn't the case, then run Dism/online/Cleanup-Image /RestoreHealth to repair any corruption component store, restart the PC later and try the sfc/scannow command.

  If still no, then try using ONE OPTION above to run the command sfc/scannow at the start

  If still no, then you could do a Refresh of Windows 8, or run a System Restore using a restore point dated before the wrong file occurred to fix. You may need to repeat doing a restore of the system until you find a restore point that is older that may work.

  If not yet, then you can use the steps in the TIP box in the section THREE OPTION to manually replace the files SFC could not fix.

  See you soon.

• Re: Toshiba Satellite A300-129: Windows XP installation

  Hi people,

  I have a question regarding Toshiba Satellite A300-129;
  I would like to install Windows XP on it (because of stability issues with Vista), but when I enter in the configuration of Windows XP, I get the message that Windows Setup did not find any HDD installed on this computer, even if the BIOS says there is one installed. Do I need a driver disk to install Windows XP on this machine?

  Thanks in advance!

  Allan

  Hello

  I guess, you should integrate sata drivers:

  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

• Problem starting after the installation of the NTI Echo Satellite P50-B-11V

  Hi guys. I have problems to start mid laptop computer (Toshiba Satellite P50-B-11V, F04236S) after the installation of NTI Echo3 to migrate the data from the drive HARD original to a new SSD (Toshiba 480 GB Q300 series).

  Error: file/echo not found boot/initrd.gz. Pilot pata-platform...
  Kernel panic not syncing VFS: Don't mount rootfson unknown - black (0,0).

  Anyone facing this problem? Please advice if you have the time.
  I tried several times to repair Windows (F12 key) and I have tried different ways to migrate data but the problem even after reboot.

  Thanks fo your time.

  Posted by marianbur
  

  Hi guys. I have problems to start mid laptop computer (Toshiba Satellite P50-B-11V, F04236S) after the installation of NTI Echo3 to migrate the data from the drive HARD original to a new SSD (Toshiba 480 GB Q300 series).

  Error: file/echo not found boot/initrd.gz. Pilot pata-platform...
  Kernel panic not syncing VFS: Don't mount rootfson unknown - black (0,0).

  Anyone facing this problem? Please advice if you have the time.
  I tried several times to repair Windows (F12 key) and I have tried different ways to migrate data but the problem even after reboot.

  Thanks fo your time.

  Dear marianbur,

  New laptop having same problem here, is now stuck... Have you received still no solution?

  Greetz

• Toshiba Satellite U400-14Z upgrade to a faster processor - which is the most rapid possible?

  Hello.

  I want to upgrade an old Toshiba Satellite U400-14Z (http://www.toshiba.eu/discontinued-p...lite-u400-14z/) a little by changing the CPU. Initially there is a processor Intel Core 2 Duo P8400 with FSB to 1066 MHz but I thought to put there P9700 or P9500. It seems that they are similar, specification is exactly, except the speed and the amount of memory cache level 2. The question is: would this work?
  I also found CPU called T9900, which is the fastest of the family. However, T-line requires more power than the line P, 25W to 35W in comparison. Is it possible that she would work in this phone?
  Maybe there's even some CPU more Rapids that would fit. Y at - it all? I'm looking for the maximum possible speed.
  Thank you for the answers.

  Concerning
  Lucas

  Posted by fel81
  

  Hello.

  Maybe there's even some CPU more Rapids that would fit. Y at - it all? I'm looking for the maximum possible speed.

  I found Intel® Core 2 Extreme Processor QX9300 who might be compatible. It has 4 cores and a thermal power of 45W design, compared to P8400 of TDP 25W. I suspect that the cooling of this laptop is insufficient to be able to disperse the money.

• Upgrade memory on the Satellite A350-10I

  I have a Toshiba satellite A350 10I. I want to increase the RAM 2x2gb ddr2 800 MHz memory.

  Can be changed with ddr3? The motherboard will support?

  This kind of upgrade can be. RAM upgrade must be done with 100% compatible modules. Faster RAM will not help at all. It depends on the motherboard THAT FSB accelerated. If you use the memory modules as soon as they be pointing down.

  How do you upgrade the drive HARD and fast use of SSDS?

• Toshiba Satellite Pro A10, Windows XP Service Pack 2

  Hello world
  "I have a ' Toshiba Satellite Pro A10: P4 - M 2.2 GHz/XP Pro/15" TFT/40 GB / 768 MB.
  I have installed Windows XP Service pack 2 in my book.
  After the update to Windows XP SP2, the only way to start my computer after putting in "sleep mode" or "hibernation mode" is witch power off and then start up.
  I reinstalled "Toshiba Power Saver", but nothing came of it.

  What can I do about it?

  Kind regards
  Krasteff

  Obviously the Service Pack 2 does not match current preinstalled saver.

  First installation, you have is to wait for an updated version of Toshiba Power Saver, which is XP Service Pack 2 tested. But so far, you have no "Standby" or "hibernate".

  Installation of the second. If you need to "Standby" or "Hibernate" feature, uninstall Service Pack 2 and wait until there is a solution to the problem of energy saving.

  The two sounds is not perfect, but I think the second installation is the best way. Toshiba will surely bring a new Service Pack 2 tested Power Saver version.

  Good bye