Installation of new fees for windows vista

Similar Questions

• Blue Screen installation updates (KB2419640) & (KB2478935) for Windows Vista

  I get the blue screen when I install the above, and this update was 12/01/2011 and continues to reappear after I restore the system to January 9. So I turned off auto updates but isn't this bad since I DON'T want to prevent remote control?  What can I do to fix these two updates. No blue screen before these updates, but as soon as I say yes to reboot on blue screen. What is a L1T (level a techie) to do. I need this computer until I get a job!

  Thanks to the intervention of Halima S... I'm ready to tackle this problem without restoring the system. My only concern is that this command deletes previous restore dates and that the option is permanently deleted. However, first I have to print the steps to follow for a clean boot and re-read. I will work from there... Still down thanks!

  Hi Apple2DellExperience,

  1. are you able to install some other updates on the computer?

  2. what was the message on blue screen?

  3. do you have security software installed on the computer?

  It is not recommended to disable the automatic update.

  These updates will be revived again after the system restore.

  I suggest that you manually download and install the update, check if it works.

  Also, make sure you disable all the third-party program installed on the computer during the update installation process.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Update security for Windows Vista (KB2419640)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=13445E4A-099A-4EDD-864E-C44F42940500&displaylang=en

  Update security for Windows Vista (KB2478935)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=4EEAAD20-729C-4594-8853-E4AE55E9D491&displaylang=en

  Update security for Windows Vista for x 64-based systems (KB2419640)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=FD6B806E-50D4-4F4D-96E1-7C71FCA4C543&displaylang=en

  Update security for Windows Vista for x 64-based systems (KB2478935)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=B2839CD0-1958-4A22-9AAC-0E0AA8F2B52C&displaylang=en

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Regarding the installation of Service Packs for Windows Vista.

  I just had windows (Vista Edition home premium) resettled on my computer because of problems. I am trying to reinstall programs, but I got the message that I need Windows VIsta Service Pack 2. I tried to download and install, but it says I need service pack 1. I tried to download this, but I get a message that it needs the program 64-bit installation. Have you tried loading cela through Windows update, but most of the updates failed. Any ideas on what to do?

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

  You are running a 32-bit Windows operating system or a 64 - Bit operating system?

  32-bit and 64-bit Windows: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

• How to get a new language for Windows Vista Enterprise.

  Greetings,

  I have Windows Vista Enterprise x 64, and I want to install the Croatian language. The problem is that I do not have the file it self.

  I found the web page of microsoft http://windows.microsoft.com/en-us/windows-vista/How-do-I-get-additional-language-files and there is only one sentence concerning Vista Enterprise: "If you are using Windows Vista Enterprise, contact your system administrator for more information about installing additional languages".

  Sense I am my own system administrator and I don't know how to get the file, I ask you to help me find my language.

  You communicate anywhere / he who gave you permission to install Vista Enterprise.

  See you soon.

  Mick Murphy - Microsoft partner

• Installation of updates for Windows Vista error 80070490 message code

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  I cannot install the following important updates for Windows Vista and I get the Error Message Code 80070490; can all help me please these problems?

  Update security for Windows Vista (KB2378111)

  Update security for Windows Vista (KB967723)

  Update for Windows Vista (KB2345886)

  Update for Windows Vista (KB2443685)

  Update for Windows Vista (KB970430)

  Update for Windows Vista (KB972145)

  
  

  
  

  
  

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  I cannot install the following important updates for Windows Vista and I get the Error Message Code 80070490; can all help me please these problems?

  Update security for Windows Vista (KB2378111)

  Update security for Windows Vista (KB967723)

  Update for Windows Vista (KB2345886)

  Update for Windows Vista (KB2443685)

  Update for Windows Vista (KB970430)

  Update for Windows Vista (KB972145)

  
  

  
  

  
  

  Hey grown-sexy

  see if the below microsoft information arranges

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044

  If he did not correct it repost in the correct windows update forum below

  It comes to the installation of vista operating system instance

  Use the link below

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  Walter, the time zone traveller

• Update Vista Update Readiness Tool system for Windows Vista (KB947821) [September 2009] - Installation failed due to the error Code 09370001 - how can I solve this problem?

  I have the same error Code 09370001 which appears whenever my PC is trying to install the update: System Readiness Tool for Windows Vista KB947821... I have 7 failures of my PC, try to install this update.

  My system is:
  Windows Vista Premium Hm
  Intel (r) Core (TM) 2 Duo processor T7250 @ 2.00 GHz
  3.00 GB RAM
  Mobile Intel (r) 965 Express Chipset Family

  Can someone guide me how I can get this update to install?

  Thank you so much in advance.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I get a repeated error on install Platform Update For Windows Vista (KB971644). Fails with the error code 80073AA2. Installation comes from Windows Update.

  Windows Update loops round and round constantly to not set up correctly, then restores the changes

  Do I need to install the System Update Readiness Tool KB 947821?

  Probably not: I had a lot of doubt that SP2 is installed if KB947821 has not already been installed.

  Given that this problem is after a fairly recent install of SP2...

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack <=pick this=""> ).

  In the case opposite & whereas KB971644 is NOT a security update, you can simply hide the "thing":

  1. stop the automatic updates service:

  Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
  Double-click automatic updates > click stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > Right click on run , and then select run as administrator >
  (type or copy/paste) %windir%\SoftwareDistribution > [OK]
  Open the download folder and delete its content
  Close the window.

  3 start | Control Panel | System maintenance and (if you use Classic view, skip this step). Windows Update |  View the updates available (or Select the updates installed): right click on the (platform) update for Windows Vista (KB971644) | Click hide update | Confirm the prompt UAC (User Account Control), if any, & OK your way out.

  4. start the automatic updates service:

  Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
  Double-click automatic updates > click Start
  (Stopping the service will take a moment)

  =====================================
  To restore/show updates for Vista: Start | Control Panel | System maintenance and (if you use Classic view, skip this step) | Windows Update | Restore hidden updates: Find and select the update you want to install. Click restore. You can now select once again it and install through the normal process.

  NB: If KB971644 were available for download/installation manual (and is not), I would have you try it.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Try buying a new activation key for Windows Vista

  I am buying a new activation key for windows vista. My computer crashed. I've lost everything. Ive had vista re installed but the activation key has rubbed the bottom of the laptop. I keep getting re directed to the microsoft site, but there is nowhere on the site that says BUY the CODE of ACTIVATION NOW.

  * original title - I am buying a new activation key for windows vista. I keep getting re directed to the microsoft site, but there is nowhere on the site that says BUY ACTIVATION CODE maintenant.*

  "Big Kirky" wrote in message News: * e-mail address is removed from the privacy * .com...

  I am buying a new activation key for windows vista. My computer crashed. I've lost everything. Ive had vista re installed but the activation key has rubbed the bottom of the laptop. I keep getting re directed to the microsoft site, but there is nowhere on the site that says BUY the CODE of ACTIVATION NOW.

  In the case of a computer from a major manufacturer contact them via their web site.  Many have recovery media low cost for just the situation you encounter.  Also they can cause (however unlikely) a new product key to replace the one that has rubbed off.  If all else fails see also: http://support.microsoft.com/default.aspx?scid=KB;en-us;326246

• The x 64-based update cumulative security for Internet Explorer 9 for Windows Vista for details of error the installation of systems (KB2761465) failed: 8007371 C Code

  Error message below Re: I got the cumulative update for IE 9-64 - bit to fail repeatedly.  The error code is listed below.
  How much of a problem is the following and, if serious, how can I get the system to install this update?  I'm running Vista 64 bit and it is patched to date - with the exception of this one.

  Update cumulative security for Internet Explorer 9 for Windows Vista for x 64-based systems (KB2761465) installation failed

  Error details: Code C 8007371
  Help and Support: http://support.microsoft.com

  Hello

  Thank you for reaching out to the Microsoft Community.

  According to the description, it seems that you have found a 8007371 C error code while trying to install update Cumulative security for Internet Explorer 9 for Windows Vista for x 64-based systems (KB2761465).

  I understand the inconvenience you encountered. I will certainly help you with this issue.

  I suggest you to refer to the advice given by Karena R on June 10, 2010 and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/error-8007371c-when-trying-to-install-Windows/7a69c389-d4d9-419A-B71B-33ce3b5348f6

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  For more information, visit the following link and check.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  If the problem persists, or you have questions about Windows, do not hesitate to let us know. It is our pleasure to be of service.

• Problems with the installation of updates for Windows Vista security: error 80070490

  Having problems to install updates of security for Windows Vista (5 pieces) for months. Error code is 80070490. I have a lot of disk space and tried to repeat the time where there are no installation. I use wireless which is a power connection (seems to be the specific network), but connect to the internet using the cable has not solved the problem either. Help, please. Thanks for your time.

  Hi AndraP,

  Since these are updates important, even if you hide updates, you may need to install the update at some point.

  You can try to perform a clean boot and try to install the stand-alone package containing the updates.

  Step 1:

  You can perform a clean boot state.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Make sure that you put the computer to a Normal startup once you are finished with the installation of the update.

  Step 2:

  Once you have placed the clean boot the computer, try to install the stand-alone package of updates from the links provided depending on the version of Windows that you are using:

  KB2378111 for 32 bit - setting of security update for Windows Vista (KB2378111)

  KB2378111for 64 bit - update security for Windows Vista for x 64-based systems (KB2378111)

  KB967723 for 32 bit - setting of security update for Windows Vista (KB967723)

  KB967723 for 64 bit - update security for Windows Vista for x 64-based systems (KB967723)

  KB2345886 for 32 bit: Update for Windows Vista (KB2345886)

  KB2345886 for 64-bit: Update for Windows Vista for x 64-based systems (KB2345886)

  KB970430 for 32 bit: Update for Windows Vista (KB970430)

  KB970430 for 64-bit: Update for Windows Vista for x 64-based systems (KB970430)

  KB972145 BOF 32-bit: Update for Windows Vista (KB972145)

  KB972145 BOF 64-bit: Update for Windows Vista for x 64-based systems (KB972145)

• I was getting a new hard drive to my HP laptop. Since I have a key for Windows Vista from the purchase of the laptop, how can I get the disk to re install the operating system?

  I was getting a new hard drive to my HP laptop. Since I have a key for Windows Vista from the purchase of the laptop, how can I get the disk to re install the operating system?

  original title: reinstall Windows Vista

  I was getting a new hard drive to my HP laptop.  Since I have a key for windows vista from the purchase of the laptop, how can I get the disk to re install the operating system?

  Contact HP (if they had not initially you provided with support or the media manufacturing process or you have lost the media and/or you don't want EU to some tools to clone the old drive to the new or can not do...) for a copy of the media restore/recovery of your system.

  http://www.ZDNet.com/blog/Bott/lost-your-Windows-discs-how-to-get-replacement-media-legally/4320?PG=3

• Error7 message about the signature unidentified, the upgrade and installation of iTunes 10.5 for Windows Vista.

  Original title: error upgrading and installation of iTunes 10.5 for Windows 6.

  I tried all kinds of ways to solve this problem, but I can't seem to find a solution. This all started when I tried to update my iTunes to version 10.5. Then came the error message 7 on unidentified signature etc. I could not even run my iTunes more then. I started download iTunes again to repair and it just doesn't work. I don't have problems with the installation of my iTunes for the first time a year ago and upgraded whenever I allow it.

  All other methods I tried to correct the error includes:
  • Uninstall iTunes completely and everything that it supports the programs and files (Quicktime, supporter of Mobile, Hello, Safari etc.)
  • Download Quicktime separately after you have uninstalled it as suggested by other users in some forum.
  • Update the frame Microsot.NET as suggested by the Apple Support site.

  • Manually started the installation of such Windows program suggested by one of the answers on this site:

    a. click the Start button, and then type services.msc in the start search box and press ENTER.
    b. Locate the Windows Installer service.
    c. check that the status is started. If the condition column is empty,
    d. right-click on Windows Installer, and then select start.
    e. If you get error trying to force start the Windows Installer service, then try to change the Startup Type to automatic.
    f. restart the computer.

    I have tried for at least 10 times and I have not yet set and am frustrated. Would be really grateful a solution to this soon.

    Windows Version: Windows Vista Home Premium - Version 6.0 (build 6002: Servie Pack 2).

    Thank you.

  Hi Junetyl,

  What is the complete error message you get?

  Method 1:

  You can see the article next to the Apple support and check if it helps.

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  You can also consult the following article:

  iTunes for Windows: "Error 7" message when you open iTunes

  You can also try the following steps and check.

  Method 2:

  You can run scanning of the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Method 3:

  You can also perform a clean boot and check if you can install iTunes.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  You can also get in touch with Apple using Arthur support.

  Apple iTunes Support

  Hope this information is useful.

• My installation disc for windows vista has an option "fix." This option allows to reset lost passwords?

  original title: repair windows

  My installation disc for windows vista has an option "fix." This option allows to reset lost passwords? If yes how?

  Hi Martine regina,.

  We will not be able to reset the password by using the option repair; you will need password reset disk.

  For more information on the same, you can check the link below:

  What to do if you forget your Windows password:http://windows.microsoft.com/en-US/windows-vista/What-to-do-if-you-forget-your-Windows-password

  Create a password reset disk:http://windows.microsoft.com/en-US/windows-vista/Create-a-password-reset-disk

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Try installing Acrobat 8 Standard on PC with Windows 7, 64 bit. During the installation I was asked to provide "files Adobe PDF.dll for Windows Vista. How can I get the required file?

  I'm trying to install Acrobat 8 Standard on a PC with Windows 7, 64 bit. During installation, you asked me to provide 'File PDF.dll Adobe for Windows Vista'. How can I get the required file?

  Hi Alan Horan.

  This link appears corresponding to your query, please visit this link ( error "the file AdobePDF.dll is needed" |) CS3 | 64 - bit Windows ) and let me know if you face any problem.

  Kind regards
  Rahul Tyagi

• A security update for Windows Vista for failure of the 32 x-based systems (KB2585542) installation code 8024200d

  I tried to do the automatic update of the KB2585542 on my PC which runs on Vista 32 bit.  Whenever I try to install it, I get one above mentioned the error code.  I ran an anti-virus, anti-malware & a reg clean and then tried to install it but I still get this error.

  Hello

  You are able to install all other updates of Windows without any problems?

  Follow these methods.

  Method 1: If you receive the Windows Update 8024200d error, it may mean that an update did not finish to download or install. The System Update Readiness Tool for Windows can correct some conditions that can cause this error.  After you run the analysis tool, try to install the update.

  You can download & run the system update readiness tool and check.
  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Method 2:  If this does not help, you can temporarily disable antivirus software, and then try to install the update.
  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  

  Method 3:  If the methods above do not help, you can place the computer in a clean boot state, and then try to install the update.  Follow these steps.

  Step 1: How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, place the computer back to normal following KB article.

  Step 2: Now, try to install the update manually.
  You can go to http://www.microsoft.com/download and use the number of the update to download and install it.

  Reference: the problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates