installation of Runtime: unknown error on the detailsboite: no details available

Similar Questions

• Unable to connect error headset/Bluetooth Headset: the pairing attempt failed in an unknown error, is the reported error code: 0x80070005

  Original title: Bluetooth headset not connecting

  I have a Plantronics 9xxBackBeat headset, and I'm trying to connect my laptop (HP Pavilion dv6000)

  However, when pairing the headset I gives me the message
  "Device pairing failed.
  Matching attempt failed in an unknown error, is the reported error code: 0x80070005
  Contact the manufacturer of your device. »
  However, there is no driver for the 9xxBackBeat headphones and when I contacted their support, I'm referred my OS manufacturer, but when I talk about Microsoft, they tell me to go to Plantronics.
  Can someone tell me please how to fix this error?
  If it is not a mistake on the side of Plantronic, and if it's not a mistake on the side of Microsoft Windows, and then what happens?

  Hello

  1. are you able to connect other devices via Bluetooth from your computer?

  2 - is this compatible with your operating system device?

  First thing I suggest you to check the manual and if this device is compatible with your operating system.

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: The problems with Bluetooth devices: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-Bluetooth-enabled-devices

  Method 2: If the problem persists, then try to update driver:

  a. click the Start button.
  (b) in the search box type devmgmt.msc and then press ENTER.
  c. Select Bluetooth peripheral device and right click on it.
  d. now, select Update.
  e. restart your computer.

  Method 3: Also I suggest to add as peripheral to your Bluetooth computer and later check the required services running on your computer.

  Set up a Bluetooth device:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Change settings for a Bluetooth compatible device:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-a-Bluetooth-enabled-device

  Hope this information is useful.

• Why do I get an unknown error when the AI document opening in Illustrator 5.5?

  Why do I get an unknown error when the AI document opening in Illustrator 5.5.? How open/fix documents?

  Did this happen after update to Yosemite? Sorry, but this could be a number of things and not only have a response

  • disable the automatic plugin font activator which is delivered with the police officer, you activate a corrupt police.
  • Clean your cache of police download nuke font it's free
  • reset your prefs AI
  • Delete your printer driver in the system preferences and recreate - Yes, there is a possibility that this can cause this
  • hold off on the update to El Captan for now, even if an update of the system has a chance to eliminate the problem, you're on CS5.5

• Error code ' 57th unknown error "while the installation of security update KB2284695 & KB2289163 for Office 2003".

  Original title: what is 57F error code when updating windows do not install updates?

  Windows Update not installing the update of security KB2284695 & KB2289163.  Error code '57th unknown error. "  Any suggestions?  Thanks in advance.

  Hi newcomer8,

  1. have you tried to install the updates manually.

  Method 1:

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2:

  You can try to download and install the updates manually and see if it works well or not.

  Links:

  Update of security for Microsoft Office 2003 (KB2289163)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=976857e9-77fc-4667-88ca-7637e57536cd&displaylang=en

  Update of security for Microsoft Office Publisher 2003 (KB2284695)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=e600de65-3e9d-4e37-8906-8b7091ff523e&displaylang=en

  Also check out the following link and try the steps by Pradeep Soni on Thursday, April 23, 2009 15:41 and check if it helps.

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/691a9c92-624e-4BB9-847a-fe9fc6a51394

  Important: The above link contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Code 646 error, windows update encountered an unknown error during the installation of Office updates.

  Original title: 646, windows update error code has encountered an unknown error.

  I tried several times to allow the updates to install on my computer but I keep getting the above error message.  Here are the following updates are not transferred to the system

  Security for Microsoft Office 2007 Suite KB2596785 update,

  Update for Microsoft Office system 2007 KB2553089 security,

  Update of security for Microsoft Office 2007 System KB2553090,

  Update of security for Microsoft Office 2007 System KB2584063,

  Update for Microsoft Office Excel 2007 KB2553073 security,

  Update for Microsoft Office Powerpoint 2007 KB2596764 security,

  Update for Microsoft Office Powerpoint 2007 KB2596912 security,

  Update for the 2007 Microsoft Office System KB2553074 security

  Update for Microsoft Office 2007 suite KB2596651

  Update for Microsoft Office 2007 suite KB2596789

  Update for Microsoft Office Excel 2007 KB2596596

  I installed the update of Windows SP2 and ran the 'Fix It' program, but updates above will be not installed this over the last 2 weeks.

  PLEASE HELP ME!  Not an expert computer operator, but I can follow the clear and direct instructions on how to solve the problem.

  Hi Monicas,

  What Fixit did you run?

  You can read the following article and try the steps.

  http://support.Microsoft.com/kb/2258121?WA=wsignin1.0

  Note: If running the Fixit to resolve your problem, then you must try the steps for Windows Vista users solve the problem.

  Important: The above article contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  Back up the registry

• Unknown error with the WRT 160 N

  I have a WAG54GS connected to internet with ip address 192.168.1.1 network connected via an ethernet cable to the internet port of a WRT 160N.

  I have a PC1 with XP Professional with SP3 cable connected to the router, a second wired PC2 with windows 2000 Professional, a third PC3 with wireless XP home with SP3 and a PC4 before a wireless with XP Professional with SP3.

  I worked in USA connecting WRT 160 modem comcast without problem and I got a wep with 26 characters for my two wireless computers.

  Now, I went back to Spain and I try to configure my network with the installation cd Wizard and my work network and I can connect to the internet, but I can't work with WEP 26 with the PC3 because I can enter only 23 characters.

  My adsl have a static ip address and it is the IP of the router assigned to WRT160N

  192.168.0.1 which is different from that of the WAG54GS.

  I can enter the web configuration of the WRT 160N but when I want to enter the basic wireless configuration, or nat programming new firmware download, or even change the ip address of the router I get the following message.

  http://192.168.0.1/apply.cgi may be temporarily inactive, or translated in another web direction

  error unknown error 2(net:ERR_FAILED).

  I would appreciate your help a lot

  Thank you

  Thank you for your help.

  This problem occurs with google chrome, but not with internet explore

  Thank you once again

• unknown error during the synchronization of large amount of bookmarks

  I have thousands of bookmarks, but has not been able to sync. I always get the error message: ' Sync has encountered an error during synchronization: unknown error. " Synchronize automatically retrying this action. »

  In order to solve the problem several times I reset the remote data, but always the same error after a retry.

  I also export bookmarks and re-imported (which replaced the existing bookmarks). Still the same problem.

  Any ideas how to fix?

  Hi Christophe,

  It may be a bug corrupting your data. Please, fill a bug by following these instructions: https://philikon.wordpress.com/2011/06/13/how-to-file-a-good-sync-bug/

  Generally the bookmarks are not the majority of the data synchronized (story takes a big piece of storage).

• Unknown error. The slow movement and Panorama photo

  Hello guys.

  I just bought a Z2.

  I tried the phone today and tried most of the functions of the camera.

  Everything works fine except when I try to slow film (don't remember the function) and when I started filming, I got the message: 'Unknown error' the second I pushed the record button.

  And when I try to use panorama it worked for 3 seconds, and then he gave me half of a panorama shot. After that I tried again and now I get the message: 'Spin slower' or something like that. I get after 2-3 sec. Then I try again and again. And now I get the message 'Spin slower' the second I press the photo button.

  If something is not here.

  What is everyone has a problem with? Can we get an update / Fix for this soon?

  Is there something I can do to remedy this?

  Just one last question.

  I got a smart group with my Z2, and when I tried to connect it to the phone, I got the message: "Chip is empty."

  What does that mean? I got this message about 20 - 30 times above all of a sudden, I could connect to it. And then the band disconnects a lot, and when I try to connect it again, I get the same message and must try several times before it works again.

  Have a people great day.

  This seems strange, try this

  settings > apps > all > camera > clear data > restart your phone > check again

• Unknown error in the network and sharing Center

  When I opened my network and sharing Center where the active networks would be just said

  'Unknown '.

  and

  "The account specified for this service is different from the account specified for other services running in the same process"

  If I open Services.msc and check the list of networks and Network Location Awareness service, both are on automatic and both connect as a network Service.

  Network list service does not work and does not give the error:

  Error 1079: The account specified for this service is different from the account specified for other services running in the same process

  I'm connected to my home network and have internet access and also a local access to other computers, it's just not appearing is not on the network and sharing Center.

  A result of this is that some of the metro apps don't report any internet connection and will not start. I currently now disconnected my microsoft account on the computer and use a local account, but the problem is still there.

  I also tried

  netsh winsock reset

  from an administrator command prompt but no change.

  Can anyone help?

  Hi Andrea,

  Please keep us updated.

  This can be shown because of missing or corrupted system files. This is why I would recommend running the System File Checker tool, which is a Windows utility that allows users to find corruptions in Windows system files and restore corrupted files.

  To do this, click Start, type command or cmd prompt in the Search box, right click invite, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  At the command prompt, type the following command and press ENTER:

  sfc/scannow

  Note: Do not close the command prompt window until the audit is completed 100%. The results of the analysis will be posted when this process is complete.

  I hope this helps. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Lumetri color is "film compilation error. Unknown error' all the time...

  I have problems to compile anything if I use the Lumetri color in first Pro CC 2016 9.2.0

  If I remove all Lumetri color on all plans, it compiles without any problem. If I use any kind of color Lumetri - presets or custom color Lumetri it's for me

  "Film compilation error. Unknown error. "if I try to render or export/compile.

  It matters little if I just export from in the body or the SOUL use.

  At first I thought it might be some errors with the media, but after trying to remove the clips one by one, he always made the mistake. Finally, I removed all the effects and it worked.

  If I put Lumetri color on a single clip, it does not.

  It's very frustrating.

  My system:

  Windows Pro 10

  I7 - 4930 K 3.4 Ghz

  64 GB OF RAM

  NVIDIA GTX 570

  4 x 4 TB HARD drive

  Clips of Panasonic GH3 GH4 - GH3 vlclips and 50 1080 P the GH4 is 4K 25 p. All places on the timeline with 1080 P. 25, have made many films with mixed without any problems before - looks like this error came after the latest organization update?

  Clues?

  UPDATE: I managed to get the sequence exported using the red giant seems only instead of Lumetri. I had jumped to almost looks like after having to get used to Lumetri, which I find easier to adjust when editing. Have the old edition, but consider the upgrade to bersion last, otherwise Lumetri works more. I wonder if this could have something to do with my Nvidia driver? Old eyes do not use the GPU but only the CPU... so maybe something related to the GPU for my GTX570 driver?

  / Morten

  Just look at the GTX 570... «With 480 CUDA cores...» " ... I think that this is your problem, really.

  Plus, the recommended minimum CUDA cores is to stay more than 1,000. Simply, this card doesn't have the power to handle the most recent Lumetri. The rest of your machine looks very good, I think you just need to move up to say a 970 at least. It would balance the rest of your machine better.

  Among the major warnings of building a computer for applications video Adobe is 'balance'... with the most amazing CPU and 256 GB of RAM, but only using a disk 5400 RPM, for example, is not a machine "balanced". 570 isn't near the capacity of your machine... and PrPro... can use.

  That's why he better just software.

  Neil

• I bought Lightroom 6 for MAC somw earlier. Now, thanks to a system remains, I can't install LR6 more. Installation stops with an error message: The Adobe Support Advisor was discontinued the Adobe Support Advisor tool served to ana

  Does anyone have an idea what to do?

  Thanks in advance

  If the error mentions the installation program was unable to initialize:

  start at the top and work your way down to apply applicable patches until your problem is solved.

  If (win) cc: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html

  If your error is:

  "Setup failed to initialize. File not found. ' or 'could not initialize installation. This could be due to missing files.

  first of all, rename folder OOBE OOBE.old.

  to find the OOBE:

  Win 64 bit OS: Program Files x86\Common Files\Adobe\OOBE

  Win 32 bit OS: Program Files \Common Files\Adobe\OOBE

  Mac os: HD > library > application support of > adobe > caps

  Mac os: USER > library > application support of > adobe > OOB

  If it fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.

  If you use an installation dvd:

  Copy the contents of the drive in a desktop folder and install from this directory.

  If you are using a mac:

  1. try to create a new user account in Mac with administrator privileges.

  2. connect to the new user, navigate to Mac HD > Application > utilities > Adobe Installer folder, locate products such as Adobe Reader, Adobe Flash, Adobe Air and uninstall the

  3. navigate to the user library > Application Support > Adobe and Adobe put in the trash.

  4. navigate to Mac HD > library > Application Support > Adobe and Adobe put in the trash.

  5 restart the installation.

  If everything is applicable above fails, check your Setup logs:

  http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-install-using-logs-elements.html

• Could not publish the package of transfer - unknown error (failed the nfc connection)

  Hello

  I finally installed see almost all packages, only the transfer option is left.

  I have configured the server, installed a certificate, and now I want to publish the main image in the repository of transfer for the linked clone desktops.

  The beginning of the publishing process, it initializes, progress to 0% and he breaks up with an error message "could not publish the package to transfer."

  Everything is setuped very well, the repository is shared correctly, inside the folder "Processing" a new folder with the ID of the publication process is created, inside this folder is created a new folder named "work", but there is nothing inside.

  OK, I looked in the file transfer server debug log:

  
  

  2011-04-26 13:54:50, 776 < Thread-6 > [RepoMessageHelper] DEBUG message filter received: Type = RepoLifeCycle, RepoOperationName = COURSE, GUID = 6f84bcab-8f85-47f0-8fd7-8ced7dd9e90a
  2011-04-26 13:54:54, 011 DEBUG < MessageFrameWorkDispatch > [ws_mvdi] unable to connect to the server esx1.atb - potsdam.de:902: unknown error 10060 (0x274c)
  2011-04-26 13:54:54, 011 DEBUG < MessageFrameWorkDispatch > [ws_mvdi] CnxAuthdConnect: returning false because CnxAuthdConnectTCP has failed
  2011-04-26 13:54:54, 011 DEBUG < MessageFrameWorkDispatch > [ws_mvdi] CnxConnectAuthd: returning false because CnxAuthdConnect has failed
  2011-04-26 13:54:54, 011 DEBUG < MessageFrameWorkDispatch > [ws_mvdi] Cnx_Connect: returning false because CnxConnectAuthd has failed
  2011-04-26 13:54:54, 011 DEBUG < MessageFrameWorkDispatch > [ws_mvdi] Cnx_Connect: error message: unable to connect to server esx1.atb - potsdam.de:902
  2011-04-26 13:54:54, 011 DEBUG < MessageFrameWorkDispatch > [ws_mvdi] TicketNFCOperations::TicketNFCOperations: could not establish NFC connection: unable to connect to server esx1.atb - potsdam.de:902.
  2011-04-26 13:54:54, 011 DEBUG < MessageFrameWorkDispatch > [ws_mvdi] MVDIServer_CreateTransferFilesForPublish: error opening of session of the NFC.
  2011-04-26 13:54:54, 011 DEBUG < MessageFrameWorkDispatch > [ws_mvdi] MVDIServer_CreateTransferFilesForPublish: completed.
  2011-04-26 13:54:54, ERROR < MessageFrameWorkDispatch > 011 [ws_mvdi] failed to make the NFC connection to host ' esx1.atb - potsdam.de' while trying to generate files for transfer to desktop PC "serverDn.
  2011-04-26 13:54:54, ERROR 011 < PublishWorker-6f84bcab-8f85-47f0-8fd7-8ced7dd9e90a > [PublishWorker] package transfer error editing: 6f84bcab-8f85-47f0-8fd7-8ced7dd9e90a com.vmware.vdi.transfer.imagerepository.PublishWorker.run(SourceFile:123)
  com.vmware.vdi.transfer.commoncontrol.TransferServerException: Mvdi error occurred during queue: mvdi, Tip: createTransferFilesForPublish. Mvdi error code: 1
  at com.vmware.vdi.transfer.commoncontrol.TransferServerException.fromFrameworkError(SourceFile:68)
  at com.vmware.vdi.transfer.imagerepository.DiskBasedPublishWorker.a(SourceFile:402)
  at com.vmware.vdi.transfer.imagerepository.PublishWorker.run(SourceFile:85)
  at java.lang.Thread.run(Thread.java:619)
  2011-04-26 13:55, 776 < Thread-8 > [RepoMessageHelper] DEBUG message filter received: Type = RepoLifeCycle, RepoOperationName = COURSE, GUID = 6f84bcab-8f85-47f0-8fd7-8ced7dd9e90a
  2011-04-26 13:55:12, 261 DEBUG < MessageFrameWorkDispatch > [ws_vmx] Rpci: send request = 'machine.id.get'
  2011-04-26 13:55:12, 261 DEBUG < MessageFrameWorkDispatch > [ws_vmx] Rpci: Envoy request = 'machine.id.get', reply ='vdi.broker.useSvi = 0;

  I searched on Google, the VMware KBs, this forum, I have no solutions for this problem.

  You have the forwarding server in the same ESX/Cluster as desktop computers to be transffered?

  Also check if the forwarding server can contact esx on port 902

  ----------------

  > [ws_mvdi] unable to connect to the server esx1.atb - potsdam.de:902: unknown error 10060 (0x274c)
  2011-04-26 13:54:54, 011 DEBUG [ws_mvdi] CnxAuthdConnect: returning false because CnxAuthdConnectTCP has failed
  2011-04-26 13:54:54, 011 DEBUG [ws_mvdi] CnxConnectAuthd: returning false because CnxAuthdConnect failed
  2011-04-26 13:54:54, 011 DEBUG [ws_mvdi] Cnx_Connect: returning false because CnxConnectAuthd has failed
  2011-04-26 13:54:54, DEBUG 011 [ws_mvdi] Cnx_Connect: error message: unable to connect to server esx1.atb - potsdam.de:902
  2011-04-26 13:54:54, 011 DEBUG [ws_mvdi] TicketNFCOperations::TicketNFCOperations: could not establish NFC connection: unable to connect to server esx1.atb - potsdam.de:902.
  2011-04-26 13:54:54, 011 DEBUG [ws_mvdi] MVDIServer_CreateTransferFilesForPublish: error opening of session of the NFC.
  2011-04-26 13:54:54, 011 DEBUG [ws_mvdi] MVDIServer_CreateTransferFilesForPublish: completed.
  2011-04-26 13:54:54, ERROR 011 [ws_mvdi] failed to make the NFC connection to host ' esx1.atb - potsdam.de' while trying to generate files for transfer to desktop PC "serverDn.

  ----------------------

  -noble

• Installation of Windows 8, error: change the folder or the file C:\Users on drive c. name and change the folder or filename to C:\ProgramData on drive C.

  Try to install windows 8 on a PC that is currently running Window XP.  It starts the installation but asks me to change the folder or the file C:\Users on C drive name. The second instruction is to change the folder or filename to C:\ProgramData on drive C.   Don't know what to do?  Thank you!

  OT:

  Problem installing Windows 8

  Hello

  Before starting the installation, you run these controls?

  Check if the manufacturer of your computer/laptop has Windows 8/8.1 drivers available for your model.

  If this is not available, Windows 8/8.1 not install and work properly for you.

  There is a lot of information in this first link from Microsoft:

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  "8.1 for Windows system requirements.

  http://Windows.Microsoft.com/en-us/Windows-8/system-requirements

  See you soon.

• Installation of 12 ODI - error of the UCR

  Hello

  I wanted to install ODI 12.1.2.0 on our server. But we are facing problem in the configuration of the ODI that my version of the UCR is 11.1.1.9.0. I surfed on the internet for hours and I am unable to find the configuration RCU (12.1.2.0/12.1.3.0) download page in OTN. Can someone help me with the URLs for the UCR files download please?

  Thank you

  Hi Aramast

  I checked in the table above yesterday and the table of the STB was not available. However, now I understood where I was wrong. During the installation of distribution of Fusion Middleware, I chose Fusion Middleware with examples.

  Today, I uninstalled all the configurations and the home of the registry and made a cool installations by selecting a different option, and I fixed it. Now, I have configured the ODI with Oracle web logic server and the base domain is being created. Thanks for your help to find the rcu.bat file.

  Concerning

  Oumaima

• Installation Wizard gives an error during the installation of update on CS5 CS6

  We are trying to install CS6 on a new windows computer with windows 8.1. We bought a version update for CS5 a couple of years ago and the installation wizard asks CS5 serial number, but when we enter the code, the wizard says serial number does not match the product. We do not know what package it belongs to, but we tried all packages and the error evertime. It did not work on another computer 2 3 years ago, but we don't have access to this device more. Could someone help us please? Thank you

  If you install CS5 there is not need to do this if your only reason is so that you can install CS6.  CS6 is a standalone product and does not update CS5.   You'll need is to first install CS6 and then activate it with CS6 serial number.  After that he will notice that you do not have a version more old qualification and then did you select CS5 as this release candidate and then provide its serial number.