Installation of the AG3605/BLURAY writer

Similar Questions

• Installation of the Photoshot 13 elements. error message: "this is a problem when extracting the files. Check the amount of space available on your computer and the rights to write to the destination folder. I have 1.38 TB of free space and total control

  I try to install photoshop elements 13, that I bought and downloaded from Amazon. When I try to install it I get the following error message: "this is a problem when extracting the files. Check the amount of space available on your computer and the rights to write to the destination folder. I administrar 1.38 TB of free space and total control.

  Charles please do not remove the installation files in the Program Files directory.  I recommend to extract the installation to your downloads folder or your desktop files.  Once installation files are extracted, you can then run the installation program to install Photoshop elements 13.

• Question about the installation of the OS

  I have some problems with the shortcut keys and I want to reformat my system.
  Problem is that I have not created recovery cd before, is this going to work if I do it now.

  Thank you

  Hello

  Please don t worry about the recovery procedure. It's very simple to do. Put the recovery CD in the CD/DVD drive, start Notepad and press C button and hold it for a few seconds. This will force your unit to boot from the CD/DVD drive.

  Follow the instructions on the screen. Standard mode will erase the whole HARD drive and create a partition. If you have only one partition I recommend to set up two of them. One will be used for the OS and application installations. The other can be used for the backup of data.

  If you need more instructions, please write again.

• Installation of the system to remotely crash.

  I tried to reformat several times but my installation acted as weird. Installation sequence evolves, the fonts have changed and there was a time the displayed installation was windows 98, when was actually what I was installing windows xp.

  During installation, I couldn't access several applications/features/functions. He said that I have the administrator privileges. I checked the group policy and discovered that the assigned owner is a series of numbers/characters, trustedinstaller, etc.. I tried to reassign it to my account but it kept coming back.

  Later, it appeared other profiles which I have not yet created and administrator privileges have been assigned to these profiles as well.

  When I restarted, I could access is more group policy, services, local politics, back, etc.

  I had problems of net security as well.

  This has been a recurring problem.

  Please note that when I was installing, cable internet was not connected.

  I tried the search and in some sites I visited, there was mention of piracy using the emf, so I tried the suggestion to surround the pc with a sheet.

  At first, I was able to reformat but after reformat, popped the question with administrative privileges. So I tried to reformat again. This time, reformatting would not follow, and after several trials he now automatically would go to a page indicating that it would proceed to the installation of the EMS. I did my research and discovered that the installation is done remotely EMS.

  Apparently, my PC is controlled remotely, but how and by which is subject to investigation, which I would ask you please your help on.

  I tried to surf and found instructions on how EMS can be disabled. I was able to turn it off and was able to proceed with the installation but still, the problem with the profile persisted property. I had no control over my own account.

  I tried to reformat again, but this time I had to surf the start-up problems, since I had starting problems and apparently my pc is executed before even my installation cd is on (CMOS kept on changing the settings).

  The EMS message appeared again and when I tried to turn it off, I could no longer use the orders or access their directory; they were already locked.
  I tried to use the Disk Manager, trying to fill the disk, of zeros, but even managers of disc, I used were acting strange. Either they would freeze or they showed different disk size or they would format so quickly.
  So I tried to check the disk through ms back and found a hidden volume x: sources. The volume label is BOOT. I tried to remove it, but I couldn't. I tried to format it, but it is what is shown:
  formatting 3 m
  Unable to format. This volume is write protected.
  Apparently, that's what is running even if I'm changing the values in the CMOS.
  I tried to research it, but there is only one site that appeared when I googled: "formatting of 3 m.
  Unable to format. This volume is write protected.
  It is the site of which appeared ONLY:
  http://roleplayerguild.com/F54/to-whom-it-may-concern-108634/index3.html
  Page not found
  When I clicked on the cached data, here's what I found:
  That's the Google cache of http://roleplayerguild.com/f54/to-whom-it-may-concern-108634/index3.html. This is a snapshot of the page as it appeared on August 26, 2011 15:44:10 GMT. The current page may have changed in the meantime. To learn more
  Text only version
  These search terms are highlighted: 3 m of formatting cannot format volume write protected
  Can I ask your help to resolve this issue please?

  Passionate, Salvation

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP forum.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• Do I need internet during the installation of the updates?

  Hi all

  I have a question regarding the installation of the updates. I have about 200 updates downloaded and ready to be installed, now my question is, given that the updates are already downloaded, do I need Internet during installation of their or they will continue installation even if I disconnect from the network?

  Thank you:

  Anil

  Hi Anil,

  With the description, I understand that you have a question that you need an internet connection during the installation of updates if they are already downloaded on your Windows 7 computer.

  The answer to your question is Yes, downloaded updates can be installed on the computer without internet. However, you may be required to have your computer connected to the internet while Configuring windows updates.

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• Two questions on ASM for the Installation of the grid

  Version of grid Infrastructure: 11.2.0.3

  Platform: Oracle Enterprise Linux 5.6

  Question1.

  Oracle: dba will own our grid software (not network user). What should be the permission set for the LUN (/ dev/sda1,..) before the installation of the grid?

  Question2.

  Currently shared LUNS appear in the form

  / dev/sdb.

  / dev/sdc.

  / dev/sdd

  is a single partition must be created before LUNS to ASM?

  For example, I should choose p (primary partition) below. Right?

  # fdisk/dev/sdb

  Device contains a table of the MS-DOS partitions, valid Sun, SGI, or OSF disklabel

  The construction of a new partitioning BACK with disc 0x8b157fd2 identifier.

  Changes will remain in memory only, until you decide to write them.

  After that, of course, the previous content is not recoverable.

  WARNING: invalid indicator 0 x 0000 partition table 4 will be corrected by w (rite)

  WARNING: The DOS compatible mode is discouraged. It is strongly recommended to

  off mode (command 'c') and change the display units to

  sectors (command 'u').

  Command (m for help): c

  Indicator of compatibility BACK is not defined

  Command (m for help): u

  Change of units of display/entry to the sectors

  Command (m for help): n

  Control action

  extended e

  p primary partition (1 - 4).

  Check step 5 here. You use oracleasm utility that changes the permission.

  Infrastructure of network for a stand-alone server installation

  Ta

  JAG

• Raw devices not visible to the installer of the grid

  Version: 11G Rel 2
  Operating system: Solaris 5.10
  
  Number of nodes: 2
  
  We decided to use the oracle user and no network user as the owner of grid infrastructure because it is just a test installation.
  
  We have done the following on Node1

  # ln -s /dev/rdsk/c4defs0  ocr
  # ln -s /dev/rdsk/c4defs1  vote
  # ln -s /dev/rdsk/c4defs3  data1
  
  
  # chown root:oinstall /dev/rdsk/c4defs0
  # chown oracle:oinstall /dev/rdsk/c4defs1  -- But still owner remains root!
  # chown oracle:oinstall /dev/rdsk/c4defs3
  
  # chmod -R 777 /dev/rdsk/c4defs0
  # chmod -R 777 /dev/rdsk/c4defs1
  # chmod -R 777 /dev/rdsk/c4defs3
  
  
  # chmod -R 777 ocr
  # chmod -R 777 vote
  # chmod -R 777 data1

  For the storage attached to node2, we did

  # ln -s /dev/rdsk/c0defs1  data2
  # chmod -R 777 /dev/rdsk/c0defs1 -- for data files
  # chmod -R 777 data1

  During the drive for the installation of grid affecting the disc OCR and voting, part
  For

  Change Disk Discovery Path

  I entered

  /dev/rdsk/

  But it is to recognize only the voting devices and data1. OCR (/ dev/rdsk/c4defs0) cannot be seen. No idea why?
  
  Another thing, I noticed. I don't see node2 (dev/rdsk/c0defs1) disk device. Shouldn't this be included as well at this point?

  Hi Steve,.

  RAW or block devices are supported only when upgrading an existing installation using the already configured partitions. On new installations, using raw or block device partitions is not supported by Oracle Automatic Storage Management Configuration Wizard (ASMCA) or Oracle Universal Installer (YES), but is supported by the software if perform you a manual configuration.

  The above information is corret.
  In my opinion, which is always supported in case of upgrade.
  I did not write this because being support block and raw devices on this version.
  With the release of Oracle 11 g 2 (11.2) database and RAC Oracle 11g release 2 (11.2), using the database Configuration Wizard or Setup to store files directly on the block or raw devices Clusterware Oracle or Oracle database is not supported.

  >

  And by manual configuration, they hear

  # chown grid:asmadmin /dev/rdsk/cxtydzs6
  # chmod 660 /dev/rdsk/cxtydzs6
  

  Right?

  Since the oracle user is the owner of the software grid in my case it would be

  # chown oracle:oinstall /dev/rdsk/cxtydzs6
  # chmod 660 /dev/rdsk/cxtydzs6
  

  Yes...
  When the grid is that you are the owner to install Oracle Grid Infrastructure, in case a manual installation using raw for ocr and vote oinstall is the Group

  Kind regards
  Levi Pereira

• Installation of the Sierra

  It is essential to backup prior to installation of the operating system Sierra?

  Yes. It is always essential to backup before starting any kind of a major project as an upgrade of the operating system.

  Old saying IT: it is always best to have a backup, no need then to need a backup and not have it.

• Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also used faster then the previous version.

  Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also faster, then the previous version, use 6s with 64 GB

  Hello naqvi65,

  I see that you have several problems with your iPhone after updating to the latest version of iOS. These issues include problems of performance, inability to find contacts at a Spotlight search, problems with enforcement camera freeze after the launch and the battery discharge more quickly than what you are accustomed. I want to help you find a solution for these questions!

  To answer your questions with performance and your inability to find contacts, we will try to restart your iPhone first to see if the problems persist. Take a look at this resource for more information:

  Restart your iPhone, iPad or iPod touch - Apple Support

  Take a look at this Web site using your photo app troubleshooting:
  Get help with the camera on your iPhone, iPad or iPod touch - Apple Support

  To keep an eye on your battery use, take a look at the information here:
  On the use of the battery on your iPhone, iPad and iPod touch - Apple Support

  To help maximize your battery performance, this site has some good tips for iOS devices:
  Batteries - maximize Performance - Apple

  See you soon!

• After installation of the latest version of firefox on the homepage still says that I don't have the latest version

  After installation of the latest version of firefox and I use the new icon on my desktop, it always says that I don't have the latest version. Installation will correctly

  It - http://www.google.com/firefox - is the old Page to start Firefox used by the Firefox 3.6 and earlier versions of Firefox, I do not think that it is maintained by Google.

  From version Firefox 4, Firefox uses a 'local' with the address Start Page of Subject: House. It looks like the old start Page, but this isn't exactly the same thing.

• Portege 2000 - new installation using the PCMCIA CD-ROM XP

  I try to install XP on Portege 2000 using the official PCMCIA Toshiba CD-ROM drive.

  Install the XP disk boots fine, but after that Setup copied the files it blue screen (BSOD blue). I'm not very tech savvy, but I think it means that the BIOS can 'see' the PCMCIA CD-ROM, but that the real image of XP loaded by the installation program cannot, probably due to missing drivers for the PCMCIA CD-ROM?

  Then, I thought that maybe I could use F6 to load additional drivers during the initial installation, but it is beyond me to create the right set of files required. I know that you can download the Freecom drivers, but I don't know what are the driver files from CD to use and how to create from scratch the txtsetup.oem file right.

  Does anyone know how to properly use F6 and load the drivers for it?

  I found a lot of messages suggesting I copy the installer to the HARD disk and launch the installation from there. My problem is that the XP installation is an upgrade CD, so I will ask you at a certain time to insert a previous Windows CD and if at that time there I don't have a working CD-ROM drive...

  First post on this forum so be nice - I did a search but not find a thread with a real solution, but of course if I miss a please report!

  Edited by topic: beneix_1

  Hello

  I managed to install Windows XP Home the Portege 2000 using the PCMCIA reader but I ve used recovery disks original Toshiba which includes the correct driver for external optical drive.

  So far I tried not to install Windows XP Home edition, using the Microsoft installation disc.

  Maybe you should get the disks of facilities and not use this upgrade disk. I think that on this path, you will be able to install WXP as suggested when you copy data from facilities at the disk directly.
  Have you tried to get the original recovery disc Toshiba WXP?

• OfficeJet Pro 8000: installation of the driver wireless Officejet 8000 Pro says default gateway is 0.0.0.0

  I'm chasing a well-documented problem of my printer lost network connection after a variable period of printing to do not. The only way to connect is to change the power supply, but the printer may take 5 minutes to blow and grunts until it settles and prints...

  I put a static IP address on the printer (10.0.0.250) as well as an empty default gateway successfully, and the documents are printed after 5mins of blowing and grunting (save the regular lost connection which I'm hunting...).

  I put what I thought has a static IP address on the router to match (see image below), but now I don't know if it was necessary, and if the 'hosting of the fixed DHCP server' is correct. It might be useless and missleading...

  Using the configuration of the printer to 10.0.0.250 interface, it seems to accept the installation of the network when the default gateway is blank. With the help of 10.0.0.2 caused the 'page not found' error in my browser (Chrome).

  However, when you try to reinstall the drivers, the installer has grumbled to the default gateway is set to 0.0.0.0, which currently is the only way it will work...

  The Win7 PC is plugged into the router.
  The printer wireless to the router.

  ipconfig on the pc gives Ethernet card details below.

  So basically I have no idea what I'm doing...!

  ==============

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  Link-local IPv6 Address...: fe80::c8e1:63ef:85e0:7 24% 13 c.
  IPv4 address...: 10.0.0.249
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 10.0.0.2.

  Router config.

  

  Thank you for your comments. It seems that I solved the problem of the default gateway. Time will tell if the remains of the printer connected through long periods of no use (see update below).

  It seems that the configuration of the router of the "DHCP fixed existing host" has nothing to do with the device assigned a static IP address. In fact, it seems that this setting prevents the printer through a default gateway of the router address.

  I noticed that when you give the PC a fixed IP, it connected through the router without any other configuration of router. If I reasoned that it may be applied to the printer also, so I moved the printer 10.0.0.251 and Bingo! the default gateway can be set to the IP address of the route.

  Since then I downloaded to other updates, which is supposed to correct the common problem of wireless printers, loss of the connection.

  I'll try to report in the next few weeks an update about the stability of connection network printers.

  UPDATED: May 23, 2016

  And more of the foregoing, my router support suggested I increase a parameter "timeout" from 24 hours to 10 days. I did it more than a week. Today, the printer worked after the impression of not for about 5 days

• Satellite L875-13D - problem with the installation of the wireless card

  Hello

  I bought a Toshiba Satellite L875-13D. I installed Windows 7 Enterprise edition.

  I have a problem with the installation of the wireless card. I have downloaded the driver on Toshiba website, but it does not work. When I run the file .zip and .exe, nothing happens. In addition, there are several pilots: Athos, Intel and Realtek and I do not know what is mine... I test all the driver but same result.

  I have the same problem with Bluetooth driver that does not work too.

  Thank you for your help.

  > But it does not work yet for Bluetooth,... I have install the driver by the .exe from the Toshiba Web site but when I run the application, I have error that says missing tosbtapi.dll. I founded and downloaded and installed on budget3 and SysWOW. But after that, the installation is blocked. Any ideas?

  Laptop Satellite L875-13D isn t equipped with Bluetooth.
  Didn t you know who?

• Re: Where to find the installation of the driver so that the Satellite A500 - 14q?

  Hello...

  I use Toshiba numere for awhile now and I never really paid attention to the order of installation the installation of the drivers.
  Now, I'm doing some research around this forum and discovered order 'is' somewhat important. or not?

  I just usually begin as desktop:
  Chipset, graphic, audio, and then all the rest. OK, toshiba must also have this addon of value, but I never installed in a specific order.

  So, the question is - where to find that my current machine (a500 - 14q) and my future one (p775.10j)?

  Thank you very much...

  Hello

  The order of installation is important if you are installing the tools of Toshiba.
  Some tools require installation of other tools.

  I looked into some of this forum for similar topics and found some details:
  Order of installation of Win 7:
  1 Windows 7 64 bit
  2 Intel Chipset SW Installation Utility 9.1.1.1019
  3 Intel Matrix Storage Manager 8.9.0.1023
  4 AMD driver 8.634.1 - 090729 a-086065C-Toshiba to display
  5 NVIDIA HD Audio Driver, 1.0.0.55
  TOSHIBA 6 utility 1.63.0.7C supervisor password
  7 TOSHIBA HW Setup Utility 1.63.0.11C
  Utility support 1.63.0.4C 8 TOSHIBA Flash Cards
  9 Realtek Audio Driver 6.0.1.5904
  10 Intel Wireless LAN Driver 12.4.1.11.0.s64_wCAT
  11 Synaptics Touch Pad Driver 14.0.1.1
  TOSHIBA Software Modem 2.2.97 12 (SM2297ALS03)
  13 Toshiba HDD Protection 2.2.0.2
  14 Bluetooth Stack for Windows by Toshiba v7.00.08 (T)
  15 Realtek LAN Driver 700.305.222.009
  16 Jmicron 1.00.32.01 card reader
  17 Sleep USB TOSHIBA and 1.2.3.0 service fees
  Facial recognition TOSHIBA 18 V3.1.1
  19 TOSHIBA eco Utility V1.1.11.64
  20 Sun Java2 Runtime Environment 1.6.0_14
  21 TOSHIBA HDD/SSD Alert 3.1.64.0
  22 TOSHIBA Service Station V2.1.33
  Control HDMI 23 2.0.0.1.64 Manager
  Manager remote control TOSHIBA 24 3.0.0.0
  25 TOSHIBA SD utility 1.9.1.12
  26 TOSHIBA PC Health Monitor 1.4.1.64
  27 TOSHIBA Fingerprint Utility 1.0.2.9
  ConfigFree 28 8.0.23
  29 TOSHIBA Web Camera Application, V1.1.1.4
  30 TOSHIBA Software Modem region Select utility 2.3.0.13
  31 TOSHIBA Network Device ID registry tool 3.0.32.4
  32 TOSHIBA Bulletin Board 1.0.04.0
  TOSHIBA ReelTime 1.0.04.0 33
  Memory SD 34 V1.9.1.12 utilities
  35 value package V1.2.26_64

• Satellite Pro C70 - B - 12 c - installation of the Package of added value

  Hello technician,

  could someone explain how to install the PPV on the Satellite Pro C70 - B - 12 c.
  I installed Windows 7 on the new Machine and want to use the utility function key.

  I downloaded the compatible vap on the driver download site. In the next step, I tried to install the PPV on the Archive of Toshiba Extractor. If I let install it automatically, I m only get the ODBC Driver-Installation Windows. So I canceled the Installation of the ODBC driver - and start the program installation of archive extracted.

  After the complete Installation, the function keys and the utility of the Flash card can be used. But the Flash card utility displays badly on the assigned keys functions. for example, on the keyboard the F11 key shows the power of the speaker function.

  The Flash Card utility indicates the Escape key for the same function switch (speaker). After the Installation of the vap, none called buttons work.

  I ve tested the function Key Utility for Windows 8.1. But this test was unnecessary.

  Thank you very much for your help!

  Hello

  Installation of VAP is not very complicated.
  You need to download the package.
  Save it to the disk (to office) and unzip the package (right click on unzip)

  > In the next step, I tried to install the PPV on the Archive of Toshiba Extractor.
  I m just wondering what you mean by install over?

  As I said earlier, after a clean install of Windows 7, you could install the VAP. But first this package must be decompressed. To decompress the package, you can use a program like WinRAR or WinZip