Installation of the fitting 8.0 unit on VMWare

Similar Questions

• Error after installation of the last DBWalker for unit 3.1.4

  I renamed my dbwalker existing (ver 2.14) and installed the latest version of dbwalker for unity 3.1.4 (3.0 build 90) and put it in the same directory as the old version, then it would become part of "filing tools". I get an error every time I start the program dbwalker (if it is selecting from the list of the "diagnostic tools" or go directly to the folder and run DBWalker. The pop-up says:

  "Error in the routine error: Automation FrmLoad.

  The specified module could not be found.

  I have to click on the OK button then a few times 'X' of the error, then DBWalker interface opens and appears normal. I have not run the utility, but because this forum works on a production system and I want to assure you that the initial error will not cause any problems. Any help would be appreciated.

  There are some DLLs that register you when you install dbWalker - they are used for things like grids and localized text and others - they get listed in the registry and there is a path to point to them. My best guess is when you changed the path of the directory (as indicated previously - this is not necessary) these links in the registry were broken, so he was not able to load. It's just a guess, I have to try and repro myself to know for sure.

  But short story - just install the new versions of the tools in their own directory and let them update filing of the tools themselves registry settings in order to avoid this sort of thing...

• Extension of the AD schema for second installation of the unit

  A CCM 4.1.3 and a Unity 4.0.4 server will be installed in a forest AD already having a CCM (3.x) and the servers of the unit (3.x) maintenance of users on the side is. The new CCM servers and services unit to users on the West Coast, including the mailboxes resident also on Exchange 2003 servers on the West Coast.

  When you install the unity server, what will be the consequences of the extension of the AD schema again for the new version of the unit? The schema has been extended during the installation of the 3.x version of the unit. Extension of the additional schema for the installation of the imminent 4.x Unit will have no effect on the existing unit? Or should the schema even extend again at all?

  Thank you

  Michael.

  I see a problem that you may or may not have lived:

  "Cisco Unity 3.1 does not support Exchange 2003. This means that you cannot run the tool of Exchange 2003 Forestprep to begin an upgrade to Exchange 2003, you can not have an Exchange 2003 server in the same forest, Active Directory as the Cisco Unity server, and you can not host subscribers Cisco Unity in Exchange 2003. Before you run Exchange 2003 Forestprep, you must first spend Cisco Unity version 4.0 (3) or later. Otherwise, the changes that Forestprep makes to Active Directory will cause Cisco Unity stop working. »

  See http://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_system_requirements_hardware09186a008010a339.html

  If you had an exchange environment 2000, he would have just run the adschema unit 4.x configuration and the extension of the schema is backward compatible for 3.x. You can run the extension of the scheme for unity 4.x anytime before installing unity 4.x

  If you want unity 4.x installed, you must extend the schema (even if the schema has been extended for unity 3.x).

• Best practices for installation of the equipment of the unit

  Is it possible to use the CD of hardware for installation with the unit while I'm using the correct equipment. Or is it recommended to install from scratch and apply the updates of security on the Unity software page.

  Thank you

  Tim

  I think that you are writing about Hardware configuration CD of the CallManager. If you are, then this is a NO-NO.

  You need the disks of the Platform Configuration that is provided with the server if you have purchased the license for the windows 2000 Server.

  So, if you don't have the disks in the Configuration of the platform, you can download the driver from HP hard drive controller and install Windows manually. Install SP4, IE6 Sp1 and you can use automatic Windows Update If you follow this guide:

  Support policy for the automatic update of Windows

  http://www.Cisco.com/en/us/products/SW/voicesw/ps2237/prod_pre_installation_guide09186a008020a63e.html#wp64185

• G729 installation on the unit instead if G711

  Hello

  I do unity 404 UM installed under Win Server 2003, out of area Exchange 2003 Service Pack 1, CCM 4.0.2a I did a number of facilities by selecting G711 so very uncomfortable with it, but never made a 729 installation.

  The customer wants to use G729. during the installation. I wonder if there are issues and or I should be aware of the requirements?

  Also, is the address IP phone to call manager {711 to 729} transcoding to the unit or do I resources of external hardware transcoding?

  Can I quickly put it to 711 if the customer is not satisfied with the sound quality of the voice mail?

  Or anything out of the ordinary you may know?

  Thank you.

  During the installation of the call the SCCP (Skinny) end points (unit/IP Phone) say CallManager what codecs they support. CallManager then negotiates the codec and indicates endpoints to use when calling. If CallManager told him to use g.711ulaw and guests are in g.729br8, then the unit will be software transcodes the file g.711ulaw and place it on the wire.

  The theory of having second guest sets in g.729 is that if all calls will be to g.729, that it is not sensible for the unit to have to transcode every single call.

  Unless the customer intends to have more than half of the calls don't calls g.729, then there is no reason to install g.729 guest.

  You can switch back to g.711 guests by re-running the installer.

  Thank you

  Keith

• error occurred during the installation of the Unit Trust Mini card reader

  I'm not able to install confidence 0908-2005-4324 - EN - 15298 - Mini Card CR reader - 1350p.

  The error message is: 'cannot install this hardware; There was a problem installing this hardware: Generic USB SD Reader USB Device; An error occurred during the installation of the appliance; One of the filters installed for this device is invalid". Should which driver I?

  I have already made contact with the card reader support team, but they couldn't tell me which driver was necessary.

  Thank you for your help.

  Hello D G C,.

  Thank you for your message.  As seen HERE, no drivers are needed for your device.  Are you able to get use all USB devices on your computer?  We must refine if the problem is with a USB port or the Generic USB driver on your computer or a problem card reader.  Please let us know so that we can help to solve this problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Get the error during the installation of the regional coordination unit

  Hello
  I am facing the error during the installation of the RCU below. We gave the user sys and the DDT that works very well DOSPROMPT.the even when I give the configuration during the installation of the remote, I get the below error. Can someone help me with this problem.
  Thanks in advance...
  
  2012-10-02 22:52:58.645 NOTIFICATION rcu: oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine::connect: the connection to the database: user: sys, role: SYSDBA, connectString: (description = (address = (host = localhost)(protocol=tcp) (port = 1521)) (connect_data = (service_name = ORCL) (server = dedicated)))
  2012-10-02 22:52:58.730 rcu ERROR: oracle.sysman.assistants.rcu.backend.validation.StepValidator::isConnectionStepValidated: unable to connect to database: name of user and password invalid.
  Please enter the name of user and password valid
  2012-10-02 22:52:58.730 rcu ERROR: oracle.sysman.assistants.rcu.backend.validation.StepValidator::isConnectionStepValidated: SQLFatalErrorException:
  oracle.sysman.assistants.common.dbutil.SQLFatalErrorException: name of user and password invalid.
  Please enter the name of user and password valid
  at oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine.connect(JDBCEngine.java:585)
  at oracle.sysman.assistants.rcu.backend.validation.StepValidator.connectDatabase(StepValidator.java:358)
  at oracle.sysman.assistants.rcu.backend.validation.StepValidator.connectDatabase(StepValidator.java:253)
  at oracle.sysman.assistants.rcu.backend.validation.StepValidator.isConnectionStepValidated(StepValidator.java:1352)
  at oracle.sysman.assistants.rcu.ui.pages.DBConnectionPage.updateModel(DBConnectionPage.java:552)
  at oracle.sysman.assistants.common.wizard.WizardPageExt.wizardValidatePage(WizardPageExt.java:166)
  at oracle.bali.ewt.wizard.WizardPage.processWizardValidateEvent(WizardPage.java:710)
  at oracle.bali.ewt.wizard.WizardPage.validatePage(WizardPage.java:680)
  at oracle.bali.ewt.wizard.BaseWizard.validateSelectedPage(BaseWizard.java:2367)
  at oracle.bali.ewt.wizard.BaseWizard._validatePage(BaseWizard.java:3072)
  at oracle.bali.ewt.wizard.BaseWizard.doNext(BaseWizard.java:2152)
  at oracle.bali.ewt.wizard.dWizard.DWizard.doNext(DWizard.java:405)
  at oracle.sysman.assistants.common.wizard.WizardExt.doNext(WizardExt.java:261)
  to oracle.bali.ewt.wizard.BaseWizard$ Action$ 1.run(BaseWizard.java:3944)
  at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
  at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:641)
  to java.awt.EventQueue.access$ 000 (EventQueue.java:84)
  in java.awt.EventQueue$ 1.run(EventQueue.java:602)
  in java.awt.EventQueue$ 1.run(EventQueue.java:600)
  at java.security.AccessController.doPrivileged (Native Method)
  in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:87)
  at java.awt.EventQueue.dispatchEvent(EventQueue.java:611)
  at oracle.sysman.assistants.common.util.EventPopUp.dispatchEvent(EventPopUp.java:94)
  at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
  at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
  at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
  at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)

  3rd error is known, one can ignore it.

  Try it with the user of the system, I thought I told you that.
  This should work.

  Score pls help if

• Question about the installation of the OS

  I have some problems with the shortcut keys and I want to reformat my system.
  Problem is that I have not created recovery cd before, is this going to work if I do it now.

  Thank you

  Hello

  Please don t worry about the recovery procedure. It's very simple to do. Put the recovery CD in the CD/DVD drive, start Notepad and press C button and hold it for a few seconds. This will force your unit to boot from the CD/DVD drive.

  Follow the instructions on the screen. Standard mode will erase the whole HARD drive and create a partition. If you have only one partition I recommend to set up two of them. One will be used for the OS and application installations. The other can be used for the backup of data.

  If you need more instructions, please write again.

• Portege 3500 - installation of the OS

  The operating system on my laptop is corrupted and whenever I try to start I get the famous blue screen saying that Windows has encountered an error and stops down to avoid any data loss. I tried to connect a CD - ROM USB drive to see if I can reinstall the system Toshiba from him but the laptop does not recognize the drive. Don't know what my options are. I see a post on the installation of the local network. It has no configuration on the client, in which case, it will not work because I can't go beyond this blue screen on startup.

  A final note to say that I am currently based in Spain, even if I bought the laptop in the United Kingdom. The reason for this note is to see if I'll have to send the laptop to Toshiba here of reinstalling the operating system.

  Thank you very much in advance for your help.

  Concerning

  Fadel
  Do you have any suggestions?

  Hello

  As far as I know, Portege 3500 can be installed with recovery DVDs using just external card PC CD/DVD or Combo drive. The way is to contact some service partners and ask them if they can do it for you.

  The recovery procedure takes about 20 minutes and I think that it may not cost a lot of money.

  Good bye

• Windows Media center 2005 SP3 of XP running. I get a message stop: 0x0000008E etc. I did an installation of the factory and did all the updates of Windows including SP3.

  Units media center crashes everytime I open a program recorded Tv or watch live TV.  After an installation of factory with discs with the PC, I have received, I am unable to set up the media library. It crashes when I'm testing involved in the installation program.  The error message is the same every time and is as follows:

  Stop: 0x.0000008e (0xc000005, oxbd296765, oxafd26b28) ox0000000

  Address NV4_displ.dll BD296765 @ BD0120000 day basic stamp 47311f16

  I thought after the installation of the plant the problem would be resolved

  Hi Kathy P._935,

  I suggest you follow the article in the Microsoft Knowledge Base and check if it helps.

  You may receive an error message on a Windows-based computer: "STOP 0 x 00000050" or "STOP 0x0000008e"

  http://support.Microsoft.com/kb/903251

  I hope this helps.

• ink advantage 4675: missing serscan.sys for installation of the scanner

  I'm trying to get this all in one printer scanner to work with my HP DV6 windows 8.1 x64machine and so far everything I've gotten is grief.
  This was initially the installation cannot find a file to install same (serscan.sys)
  All other posts said I need for an XP operating system file.
  Found one online, downloaded and run Setup to download folder, where he stopped at the second location request to the file where the installer says the file was not signed by microsoft.
  Put the same file in the C:/windows/inf folder and finally installed, but the scanner does not.

  Running the printer HP scanner doctor said there was a problem in the device manage and the unit had to be uninstalled. At this point, the only thing I can figured is the unsigned serscan file which was not duly signed.
  Got a serscan.sys since one machine virtual XP, uninstalled and reinstalled the printer with the new file in the inf folder and now the installer throws an error message...
  return to the downloaded file installed, the device but the printer does not work.

  I think I found the propblem... the serscan.sys downloaded internet and even I got the XP machine.
  Went in Windows/inf and deleted the serscan.sys.

  Then windows/system32 and did a search for the serscan.sys where research has found two files, an old man of about 2014(*i think) in a repository in system32 folder and another who was very new in the folder system32 himself.
  I copied the serscan.sys of the repository and pasted into the windows/inf and the folder windows/system32, a reinstallation of the software of 123.hp.com and everything worked!

• Quickly, the HP Envy 110 unit with the Samsung tablet can be printed?

  Quickly, the HP Envy 110 unit with the Samsung tablet can be printed?

  Yes, assuming that you are referring to an Android table... If you are referring to Windows 8 tablet please specify.

  You can print via the local network using HP ePrint mobile app.

  Follow these guidelines to learn more about installation and usage of the app:

  http://support.HP.com/us-en/document/c01616126

  In addition you can also scan your Tablet using the HP printer control application:

  http://support.HP.com/us-en/document/c03561640

  Shlomi

• Installation of the OS is not REC my hard drives.

  Hello

  Computer - XPS/Dimension 400/9150

  IM setting this computer for a friend and the HD does not so I bought a new segate 500. I'm going to load XP 32-bit SP2 on the system, and I get this screen after pressing enter on the first page to the configuration screen.

  "The installation program found no hard disk units installed on this computer" is also a paragraph that the hard drive is connected properly, and believe me, it is.

  He gave me an option on this screen and is to press F3.

  Note - Bios reconizes the drives very well.

  Note that I also tried the 64-bit version of too. (to check)

  Thanx, hams

  
  

• View zoom "fit visible" default definition does not work because it changes during scroll even if the "fit visible" option is checked. How to solve this problem?

  View zoom "fit visible" default definition does not work because it changes during scroll even if the "fit visible" option is checked. How to solve this problem?

  Hi andrik14218037,

  Once you have set to "Fit Visible" it won't change the zoom, scrolling.

  * Make sure that you did not press the Ctrl key while scrolling the page.

  Open Acrobat Reader DC, go to the Help menu & repair the installation, make sure also that it is updated Release Notes | Adobe Acrobat, Reader.

  Let me know if it solves your problem.

  Kind regards

  Nicos

• Two questions on ASM for the Installation of the grid

  Version of grid Infrastructure: 11.2.0.3

  Platform: Oracle Enterprise Linux 5.6

  Question1.

  Oracle: dba will own our grid software (not network user). What should be the permission set for the LUN (/ dev/sda1,..) before the installation of the grid?

  Question2.

  Currently shared LUNS appear in the form

  / dev/sdb.

  / dev/sdc.

  / dev/sdd

  is a single partition must be created before LUNS to ASM?

  For example, I should choose p (primary partition) below. Right?

  # fdisk/dev/sdb

  Device contains a table of the MS-DOS partitions, valid Sun, SGI, or OSF disklabel

  The construction of a new partitioning BACK with disc 0x8b157fd2 identifier.

  Changes will remain in memory only, until you decide to write them.

  After that, of course, the previous content is not recoverable.

  WARNING: invalid indicator 0 x 0000 partition table 4 will be corrected by w (rite)

  WARNING: The DOS compatible mode is discouraged. It is strongly recommended to

  off mode (command 'c') and change the display units to

  sectors (command 'u').

  Command (m for help): c

  Indicator of compatibility BACK is not defined

  Command (m for help): u

  Change of units of display/entry to the sectors

  Command (m for help): n

  Control action

  extended e

  p primary partition (1 - 4).

  Check step 5 here. You use oracleasm utility that changes the permission.

  Infrastructure of network for a stand-alone server installation

  Ta

  JAG