Get the error during the installation of the regional coordination unit

Similar Questions

• installation of the regional coordination unit

  Hi experts,
  
  I use a tool to administration of BI (Client Installation) on 32-bit computer
  If I try to open the RPD in online mode, then he said: not able to connect to the Server BI instance.
  
  I'm trying to connect to the server of BI on the other 64-bit machine
  
  I'm going to install the weblogic Server
  If Yes? then
  1 should. what version I
  2. do I need to create a separate RCU schema for this.
  
  If not then what steps I will follow
  
  
  see you soon
  Ankit

  Ankit Gupta says:
  I'm going to install the weblogic Server

  N °

  I can assure you that you can certainly connect using the tool of administration of a BI 11 g client install on a 32-bit Windows machine to a BI 11 g RPD on a 64-bit BI server online (my server is RHEL 5). You have not need a client-side install of WLS. You need not any schema RCU more. However, you must create an ODBC connection to your customer. Start Run odbcad32 - then create a system DSN. Even on a single node installation the port will be the port cluster (8706) not the bi port server (8703). Click on test to test the ODBC connection. Success?

• I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.

  I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.

  Installed the new hard drive on my Toshiba laptop and when I ran my recovery disk, Windows Vista installed, but when I restarted computer I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.

  Help, please.

  Hello
   
  
  Your error message, the problem is probably caused by BIOS or DVD settings or bad cabling to SATA hard drive. Please do the following to narrow down because of the problem.
   
  (a) ensure that all laptops the same hardware, the same manufacturer and the same model.
   
  (b) upgrade the BIOS to the latest version; go into the BIOS and enable "Load Fail - Safe Defaults".
  http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions
   
  Warning of the BIOS:
  BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
  
  (c) If you connect the SATA drives, please configure the SATA controller in compatible mode in the BIOS.

• Get 364 error during the installation of Windows Update.

  Original title: I get an error code 364 on my windows vista computer. It will not download new update please help! I want to solve this problem without having to pay anything. Thank you

  whenever I shut my computer down it trys to download updates from the window. but then, when I turn on back says error364. Help, please!

  Hi Vicky,

  We need after the details on your part to help you better.

  (1) what is the exact full error message?

  (2) do you have any third-party security software or antivirus installed on your computer?

  Check the updates installed properly on your computer. Double-click the update that shows unsuccessful, and write us with error codes. You can follow the steps in the link below.

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-in/Windows-Vista/see-which-Windows-updates-are-installed

  You can also provide us with the details of the event viewer. Follow the steps below.

  Open event viewer

  http://Windows.Microsoft.com/en-in/Windows-Vista/open-Event-Viewer

  You could deal with this question for various reasons. Windows update fails to install if there is a conflict with a third-party security software installed on your computer. Follow the troubleshooting steps below.

  Step 1: Temporarily disable all security software. 

   

  Temporarily disable anti-virus software or any other security software temporarily on your computer.

  Warning: security software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2: How to reset the Windows Update components?

   

  http://support.Microsoft.com/kb/971058

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.

  http://Windows.Microsoft.com/en-in/Windows-Vista/back-up-the-registry

  You can see the steps in the link below.

  Problems with installing updates

   

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-with-installing-updates

  Write to us at the State of the question. We will be happy to help you come.

• I get this error during the windows WindowsUpdate_8024A000 updates

  I get this error while the vista sp2 update is there any solution for this? WindowsUpdate_8024A000

  Hello
  The Windows Update 8024 A 000 error Code means THE NOSERVICE WU E. This translates as UA was impossible for incoming calls to THE service.

  I would like for you to perform general troubleshooting steps for Windows Update.
  Method 1: Try to run the fix - it of the article mentioned below, if you not him have not yet tried.
  The problem with Microsoft Windows Update is not working:
  http://support.Microsoft.com/mats/windows_update/
  Method 2: Scan run SFC. Analysis (sfc) System File Checker will Windows replace corrupted or missing system files on your computer.
  Scan sfc enforcement procedure:
  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  b. click on continue or provide administrator credentials if prompted.
  c. in the type in the following command prompt window and press ENTER:
  sfc/scannow
  Refer to this article for more information:
  http://support.Microsoft.com/kb/929833
  Method 3: Check the hard disk for errors:
  See: http://windows.microsoft.com/en-US/windows-vista/Check-your-hard-disk-for-errors
  Note: Check hard drive for errors will check the bad sectors on the hard drive and repairs. During this process, there is a chance of losing the data in these sectors. Please back up the data before performing this step.
  I hope this helps.

• I get an error during the in-app purchase

  Hello! I am Huy. The Japan student. I get an error when buying in-App error "your purchase could not completed, support contact Itunes Support at www.apple.com/support/itunes/ww/.

  I'm afraid to have to do what the message - says contact Apple directly.

  We are just other users like you, and we can not help with this problem.

• Sims 3 gets CRC error during installation

  Hello, I would like to know how to get sims 3 to work on my laptop. I downloaded it but it happens with a crc error during installation. I have read that this can be caused when your computer needs to defragment if...

  To try to solve this problem, I downloaded a cleaning and defragmentation program. I cleaned my computer and tried to Defrag. I then discovered that I could not defragment if I had vista sp2. I downloaded sp2 eventually with the help of an advisor. There were a few flaws that prevented me to download it myself. Now I have sp2, that he will not yet be defragmentation without gel. So I can not even download the sims 3! Its very frustrating and I was wondering if you could help me to sort this please?

  Hi, I have the same error when I tried to install it on my pc.

  What I did:

  1. run the cleanup utility on the Local C drive windows disk

  2. restart your computer.

  3 run ccleaner , then click on "cleaner".

  Then, got to 'Register' then click Scan then click Fix all issues...

  4. prior to installing the Sims 3 game, clean installation disk using a disk cleaner and a microfibre cloth. Make sure the disk is dry until you load it in your DVD player.

  5. once the installation is complete, restart the computer. Then, refer to steps 1-4.

• Defective JavaScript and cannot be removed or reinstalled, get «fatal error during installation»

  As a result of an error indicating that javascript has not been installed (Internet options/security/scripting is set correctly) I tried to remove the Javascript (before a new installation) but which have resulted in a message: fatal error during installation (probably installshield). I'm so stuck without Javascript and cannot update or delete it.

  I have version 6 update 27 Javascript, Windows XP and Internet explorer 8

  Any help will be greatly appreciated

  Barry

  Hello

  You can run solve this link and try to uninstall java and check if the problem persists:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

• How to fix an error during software installation driver for a printer?

  I have a desktop pc (Windows 7 Ultimate x 64) with a printer (HP Photosmart C4580) and I try to install this device, but during the driver installation, I get an error that says:

  "The printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.

  I tried to fix this by using the appropriate software for the correct type of the operating system and the software fails.

  In addition aid, outside the confusion, that some people cannot respond does not post several times.

  If the clean boot procedure did it means that your base system (win) is damaged

  What third party maintenance utilities have used? If everything was what is generally described as "SpeedUpMyPc" / utilities optimizer based on CSSTidy so using such a damaged file system and the Windows registry.

  After what may be your only option to clean install Win

• get compilation errors during migration of weblogic7.0 to 9.2

  I get compilation errors for my request during the migration of weblogic7.0 to weblogic9.2. These errors are specific to the weblogic.servlet.FileServlet, weblogic.servlet.WebAppServletContext, and weblogic. Security-related packages.
  In the code of the application itself is called Fileservlet classes. WebAppServletContext calls the getWar() method.
  I found these classes and methods are not api weblogic9.2 and weblogic7.0 api as well.
  
  But it is having compiled without error in weblogic7.0 and it's errors in weblogic9.2.
  
  Can anyone suggest sort of like any changes of the configuration necessary for it to fix these errors of compilation.

  This information can be provided by the support the Oracle customer... Because the missing methods belongs to 'Internal API to WebLogic' and no official docs are available from outside the world of oracle because of the internal API.

  Thank you
  Jay SenSharma

• Internal error during an installation of Musicnotes Suite

  I'm about to install a product call Musicnotes Suite and I get an error message: internal error: failed to expand shell folder constant "userdocs."    Help, please!

  Hello

  I suggest you to check if the program is compatible with Windows vista, here is the link for compatibility:

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/

  Also check out this link:

  http://support.Microsoft.com/kb/822798

  It will be useful.

• Equium A100-147: I get an error during the recovery procedure

  Hi again,

  I had trouble with my equium a100-147.
  I tried a restore, but the disc is scratched so I phoned in ESL and it snet me a new recovery image.

  I tried the new recovery disk and am now errors when I boot the disk.

  error is

  "internal error crc file: \WINDOWS\$NtUninstallKB895200$\msdtctm.dl.

  any suggestions are welcome. get really annoyed with my machine as my warranty expired only one month

  Thank you

  Hmm... I studied a bit and it looks a bit like a malfunction of the partition.
  It would be desirable to boot from the original CD of Microsoft XP and to start the repair console.
  Then you could try these various commands which help to repair the boot manager, repair errors, locate bad sectors and recover readable information.

  -fixboot
  -fixmbr
  -bootcfg /rebuild
  -chkdsk /r

  If this does not help, you should erase the entire partitions and must format the HARD drive in NTFS file system. Then access the BIOS and set it to the default value.
  Once this procedure tries to start again on the new recovery CD!

  Good bye

• Cannot run command line error during program installation

  One of the suppliers with which our company works sent us a new program to securely transmit data between our computers and their server. I installed it on all of our computers but. I have run the install and I get a box that appears and says:

  . / files. Ink

  Cannot run commandline

  It is a professional Windows 7 system with all updates. Other computers I installed on are a mix of Win 7 Home & Professional and 2 systems to win 10.

  When I look at the installation on other computers, it is a simple installation of Installshield.

  I ran several programs to check the virus or maleware and he comes clean. I have run chkdsk /f and sfc/scannow. I run cleaning programs and defragmented the disk.

  It doesn't matter if I run it in compatibility mode different or as an administrator. Result in the box to appear.

  I can't pass this system to earn 10 again because of other programs that need to run on it.

  I could use you help figure this.

  Thank you

  I solved my problem. It seems at one point that the user has installed a program called UltimateZip not realizing that Windows would decompress the files for it. Later, she deleted the program and he had left his associations in the registry. I ran some programs uninstaller to make sure that none of the programs files have been left and then here:

  http://www.SevenForums.com/tutorials/19449-default-file-type-associations-restore.html and downloaded the

  files needed to restore the association for exe, zip, and lnk files. I followed the instructions on the site and merge the registry entries. I restarted the computer and was able to install the program. In fact, it is a simple process. Thanks to sevenforums for having this help there. I hope this helps someone else.

• Why I am getting this error during video playback: Adobe SiteCatalyst error: did not find module media

  When you try to view the video on several websites, the following error message is displayed when the video should play: Adobe SiteCatalyst error:
  Found no media Module

  in this case probably the blur addon was to block the loading of content that is necessary to operate the video player...

• I get an error message saying 'installation failed' - what can I do about it?

  Hi, I paid just for Adobe Creative Cloud and when I started trying to download applications, it is about 80% then says "Installation failed".  I followed the instructions on-screen very little to try to fix them or even know what it is but I am nowhere.  Anyone has any suggestions as to what the problem might be/how can I fix it?

  Troubleshoot installation with the log files. CS5, CS5.5, CS6