the closing force of the vSphere web client session after 10 minutes of inactivity.

Similar Questions

• vSphere Web Client issues after 5.5 upgrade to a 5.1

  Everyone,

  After I upgraded my vSphere 5.1 to 5.5 Web Client I get the error under the 'Resources of Cluster' window on the summary below tab

  ObjectNavigatorVSphereDataAdapter.invalidQuerySpec

  

  It is on each cluster I have set up.

  Thank you

  m @.

  I had this problem as well and it was resolved by uninstalling the UCS plugin for web client.

• vSphere Web Client 5.5 and Google Chrome

  Is Google Chrome completely broken now for the Web Client? Around Thursday or Friday, it stopped loading on my Chrome installation. Works fine on IE, but I feel dirty using this browser. I know that Google support killing NPAPI (or something like that) and there was a work around for now but not yet that works. If I try to load the Web Client I get a failure just after the VMWARE whitens. VMware is working on a fix, I hope is not support vSphere 6 because Dell is not putting an ESXi Iso approved for the VRTX until the 2nd quarter of 2016.

  If you use Chrome 42, you will need enable support NPAPI.

  Chrome 42 breaks the vSphere Web Client integration Plugin

  Chrome 43 will display the beloved "Aw, Snap!" at the launch of the Web Client vSphere integration Plugin. Try to disable the locking of renderer win32k to work around this problem.

  Chrome 43 breaks the vSphere Web Client integration Plugin... Once again

• vSphere Web Client

  We are short of vSphere 5.5 and I went to change the settings of one of our virtual machines and I get the message, "you cannot use the vSphere client to change the settings of the virtual version 10 or higher machines. Use the vSphere web client to change the settings for this virtual machine. He did this on one server and I don't know when it started or how do I install/use the web client of vSphere.

  If you don't want to use the web client, you can always return the virtual machine to version 9 of material or below. This can be done to turn off the virtual machine and by editing the vmx file:

  virtualHW.version = "10".

  Change this line:

  virtualHW.version = "9".

  Then turn on the virtual computer and you will be able to change the settings without the web client.

• VSphere Web Client impossible to deploy OVF,

  I want to use WebClient deploy the ovf of POS, but every time, it appears that: customer integration plugin must be installed to activate click on function of ovf the link below to download the insstaller.

  The I click on it and install it, of course I disable the IE protected mode and restart it.

  but next time when I open it, it will prompt me again and again.

  I have try it on firefox. It's the same question.

  My version of IE is: 11.0

  Help, please.

  What version is your vCenter Server? Anyway Internet Explorer 11 has some compatibility issues with the plugin for integration, see the release notes follow-up note:

  • Integration of client plug-ins can not work as expected if you log the vSphere Web Client using Internet Explorer 11 *.
    If you log the Web Client using Internet Explorer 11 vSphere, the following problems may occur when you perform tasks related to the Client plugin integration:
    Solution: use Mozilla Firefox, Google Chrome, or earlier versions of Internet Explorer to access the Web Client vSphere. You can also use vSphere Client instead of vSphere Web Client to work around this problem.
  • • Even if the Client integration plugin is installed, the following message appears when you try to import or to export a model from the FVO:
      Download the plugin Client integration
    • File browser does not download or download a file from the data store.
    • You can't get images of the CD/DVD drive.
    • The console of the virtual machine you may see a black screen with the following error message:
      Remote console is not properly installed

• vSphere Web Client: Error #1034 when you connect.

  Hello

  Hope someone can help me with this one.

  When I try to connect to the vSphere Web Client I get this error (in Flash format) box:

  An internal error occurred - error #1034

  

  This occurs just after a successful authentication

  I have tried different browsers, the Flash upgrade, etc... No luck.

  Any ideas? It used to work fine, but I don't have any idea what has changed.

  Thank you!

  Thanks for the suggestion of julienvarela.

  Apparently, the error was caused by a limited amount of free disk space on drive (C) of the server. After I added more space, the error disappeared.

• vSphere Web Client keeps a disconnect me!

  I use (and love) the Web Client vSphere. But after a short period of inactivity it maintains a disconnect me! It is most annoying. The former client web no never dared such a thing, but this new client seems a touch paranoid for me.

  Horizon view administrator is a similar web client for VMWare View Horizon and also used to do the same thing, but then I changed the Timeout of Session in the global settings for the maximum of 4320 minutes (3 days). Now, he respects me .

  I can't find such a setting in the Web Client. Help, please!

  Thank you.

  Take a look at setting the vSphere Web Client time-out value for how to configure the session timeout.

  André

• Language issue VSphere Web Client Version 5.1.0

  Hi all

  How can I change the VSphere Client Web Version 5.1 to the United States English version without completely re - install? I also have a French Windows XP with IE in French. My hosts are English American and I did not have this problem of language with the VmWare Vsphere Client (it is in US English)

  Thank you

  Concerning

  Bernard

  Hi bernardP,

  To display the web client in a localized language:

  Add the location parameter to the URL used to access the web client:

  • The default URL for the vSphere Web Client is:

    https://client-hostname:9443/vsphere-client

  • To specify a language, add:
    • English:/?locale=en_US
    • German:/?locale=de_DE
    • French:/?locale=fr_FR
    • Japanese:/?locale=ja_JP
    • Korean:/?locale=ko_KR
    • Chinese:/?locale=zh_CN
  • For example

    https://client-hostname:9443/vsphere-client/?locale=en_US

• can vSphere Web Client - I install Linux server room?

  Is it possible to install the vSphere Web Client on Linux? I have a Linux (Ubuntu) web server and I would like to consolidate web services servers / to this machine. However, it seems that the Web Client (server) can only be installed on Windows...

  Hello.

  Unfortunately, it's Windows only.

  Good luck!

• VSphere Web Client cannot connect to the server vCenter Single Sign On.

  I'm running the virtual appliance of the trial 5.5.0.20400 build 2442330 on ESXi 5.5.0, 2068190

  While I try to log on to the Web Client, I get this error.  VSphere Web Client cannot connect to the server vCenter Single Sign On.

  I put fallow the steps to disable SSO by changing the webclient.properties line add file and ad sso.enabled = false .    Then on the vCenter Server Appliance, restart the vSphere client service by typing service vsphere-client restart .

  I enclose the reference files.

  All ideas will be useful

  
  

  This answer was simple, all I had to do was remove the # in front of the statement in the file.   and SSO has been disabled after the restart of the service.

• Change the default Port of vSphere Web Client to any other port 9443

  How can I change vSphere Web Client by default Port 9443 for any other port in Windows vmware web client server after the installation of the client web and vCenter camera well?

  You can change the post-install Web Frontend Client vSphere 5.1 port by editing the following on the Server Web Client configuration file:
  

  C:\Program Files\VMware\Infrastructure\vSphereWebClient\server\config\tomcat-server.xml

  
  

  Find the entry below and change the port accordingly:
  

  Then restart the WebClient service to make the change take effect.

• Cannot save vSphere Web Client after the replacement of the SSL certificate

  Hi all

  I have followed the Articles of Derek Seaman on the replacement of all the certificates in vSphere 5.1 and have since turned to the VMware KB Articles. I replaced the certificates for the SSO, the inventory Service and vCenter Server with no problems (other than having to use OpenSSL-Win64 for vCenter certificate that I could not get the x 86 version certificate of work, makes no sense, but I'll take the small victory).

  If you follow the guide of vmware to replace the web service certificate, http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC & docType = kc & docTypeID = DT_KB_1_1 & externalId = 2035010, I get to step 12, enter the VMware vSphere Client Web back to vCenter Single Sign On and the following error:

  ##########################

  D:\Program Files\VMware\Infrastructure\vSphereWebClient\SsoRegTool > regTool.cmd registerService - cert "C:\ProgramData\VMware\vSphere Web Client\ssl" - ls - url ( https://(Server URL): 7444/lookupservice/sdk - username admin@system-domain - password (password) - dir 'D:\Program Files\VMware\Infrastructure\vSphereWebClient\SsoRegTool\sso_conf' - ip "*." ' * ' - serviceId-file 'D:\Program Files\VMware\Infrastructure\vSphereWebClient\serviceId'

  No file properties not found
  Initialization of provider of record...
  SSL certificates for https://vsphere.au.ray.com:7444/lookupservice/sdk
  SSL certificates for https://vsphere.au.ray.com:7444 / sso-adminserver/sdk
  Unhandled exception trying to escape: null
  Return code is: OperationFailed
  100

  ##########################

  VMware technical support suggested I uninstall all components, delete all databases and try again. I have done this and have exactly the same result.

  Has anyone seen elsewhere or managed to solve?

  Chris

  So, I managed to solve this problem. Not sure that this applies to everyone, but my problem was caused by registering using among other names of the subject in the SSL certificate for the SSO rather than the common name of the certificate.

  For example, the server name is server1.company.com. It is the common name of the certificate. But one of SAN of the certificate has been "vSphere.company.com".  If I used this other name in one of the component records that they would fail. I found that I have to use the common name. Even if the alternative names of job access to via your browser web, there is no certificate warning, if the registration of components using these names, it would fail.

  It seems crazy that you can use any of the San... then why allow us to make?

  Initially, I tried to replace the authentication certificate ONLY when the town was called vsphere.company.com, rather than the hostname of the server, and which is installed. However, try to install the Web Client would fail. When you come to the step where you have to accept the certificate of SSO, the installation fails because the common name of the certificate does not have the host name of the SSO server. It seems insane to me... why the host name of the server running the SSO should still come in when all calls are over HTTPS is simply absurd!

  I confirmed this with VMware Technical Support and they checked my conclusions.

• How to retrieve the id of the web client session

  Is their no way to retrieve the web client session ID.

  The UserSession class gives you the unique clientId identify the client session.

  See how UserSession is used in the samples/vsphereviews/vsphere-wssdk -Fournisseur/src/main/java/com/vmware/echantillons/wssdkprovider/vmdataproviderimpl.java

• Cannot use Chrome to connect to the web client vcenter after update.

  vCenter Web Client Version 5.1.0 build 1115182

  Customer integration Plugin VMRC version 5.1.0 build 1060398

  Customer support version 5.1.0 build 832030

  Flash Player WIN 11,8,800,94

  Browser Google Chrome Version 29.0.1547.66 m

  After all components of vCenter update I am more able to use Chrome to access vCenter Web Client.  When the connection page opens, I get the following error:

  Connection error: could not connect to vSphere Web Client. Contact your administrator to resolve this problem.

  If I try to connect, I get this error:

  Provided credentials are not valid.

  Everything works fine if I use IE 10.  Someone at - it see this before and knows how to solve?

  Thank you

  Mux

  It is fixed.  I had 'Block third-party cookies' checked.  After unchecking it connected perfectly.

  Mux

• The /drm-web-client/Logon.aspx file was not precompiled and cannot be requested.

  Hi all

  We currently use DRM Version 11.1.2.2.302 patch.

  We are facing the error when we open the web console below.

  The /drm-web-client/Logon.aspx file was not precompiled and cannot be requested.

  It used to work very well and we see that this web configuration file has been updated. I assume that there is a problem with Internet Information services.

  Any help would be greatly appreciated.

  Thank you

  VINET

  Hi all

  The Web configuration file has been modified by windows service and after restarting the server, new web configuration file has been created and we have web access console.

  VINET