Installation of the ripple

Similar Questions

• Need help with the installation of the WebWorks tools order

  Hello world.

  Brand-newbie to your Forum and the development for the Playbook.

  Developed software and Web, mainly as a hobby for about 15 years and more. A number of associates
  and friends have Playbooks now, so I think trying my hand to redevelop some of my
  old software for the platform of the Playbook. I plan to just using WebWorks for now.

  What I would appreciate, is some clarification as to the order of installation of the tools.
  I have already installed ripple chrome just to get a peek at a few examples.
  The ' tools' section to WebWorks watch ripple as the first installation, but I do know that I read somewhere
  in the Forum that WebWorks should be installed "before" ripple. And if the ripple is already installed.
  It must be uninstalled before installing WebWorks because of potential conflicts.

  So is this the correct installation order?

  (Installation on Win 7 64-bit.)

  1. install the SDK WebWorks
  2. install VMWare Player
  3. install the ripple

  I also remember reading a thread where some mentioned problems of compatibility with the 64-bit version of Java.
  This box is running Java 7.0.90 - 64 bit.

  And finally, for the moment at least, what additional script libraries are the "must have".

  Thanks in advance.

  For anyone else looking for a similar response, check out:

  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/installing-WebWorks-Tablet-devel...

  By the same user.

• After you have installed the ripple 0.9.4.1 I can't find a way laucnhing it

  After you have installed the ripple 0.9.4.1 I can't find a way laucnhing, there is no program menu icons, not on desctop... nowhere.

  What is the way of how correct installation?

  I installed it on the D drive instead of c... but it's okay

  PS. anyone can fix version on the main site, it says 0.9.1 but actual installed version is 0.9.4.1, it confuses everything team.

  Open chrome.

  In Explorer, navigate to:

  C:\Program Motion\Ripple 0.9.4.1\ search

  Drag ripple_ui.crx chrome.

  Basically, see here:

  https://bdsc.webapps.BlackBerry.com/HTML5/documentation/ww_getting_started/Use_the_Ripple_emulator_C...

• Installation of the Sierra

  It is essential to backup prior to installation of the operating system Sierra?

  Yes. It is always essential to backup before starting any kind of a major project as an upgrade of the operating system.

  Old saying IT: it is always best to have a backup, no need then to need a backup and not have it.

• Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also used faster then the previous version.

  Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also faster, then the previous version, use 6s with 64 GB

  Hello naqvi65,

  I see that you have several problems with your iPhone after updating to the latest version of iOS. These issues include problems of performance, inability to find contacts at a Spotlight search, problems with enforcement camera freeze after the launch and the battery discharge more quickly than what you are accustomed. I want to help you find a solution for these questions!

  To answer your questions with performance and your inability to find contacts, we will try to restart your iPhone first to see if the problems persist. Take a look at this resource for more information:

  Restart your iPhone, iPad or iPod touch - Apple Support

  Take a look at this Web site using your photo app troubleshooting:
  Get help with the camera on your iPhone, iPad or iPod touch - Apple Support

  To keep an eye on your battery use, take a look at the information here:
  On the use of the battery on your iPhone, iPad and iPod touch - Apple Support

  To help maximize your battery performance, this site has some good tips for iOS devices:
  Batteries - maximize Performance - Apple

  See you soon!

• After installation of the latest version of firefox on the homepage still says that I don't have the latest version

  After installation of the latest version of firefox and I use the new icon on my desktop, it always says that I don't have the latest version. Installation will correctly

  It - http://www.google.com/firefox - is the old Page to start Firefox used by the Firefox 3.6 and earlier versions of Firefox, I do not think that it is maintained by Google.

  From version Firefox 4, Firefox uses a 'local' with the address Start Page of Subject: House. It looks like the old start Page, but this isn't exactly the same thing.

• Portege 2000 - new installation using the PCMCIA CD-ROM XP

  I try to install XP on Portege 2000 using the official PCMCIA Toshiba CD-ROM drive.

  Install the XP disk boots fine, but after that Setup copied the files it blue screen (BSOD blue). I'm not very tech savvy, but I think it means that the BIOS can 'see' the PCMCIA CD-ROM, but that the real image of XP loaded by the installation program cannot, probably due to missing drivers for the PCMCIA CD-ROM?

  Then, I thought that maybe I could use F6 to load additional drivers during the initial installation, but it is beyond me to create the right set of files required. I know that you can download the Freecom drivers, but I don't know what are the driver files from CD to use and how to create from scratch the txtsetup.oem file right.

  Does anyone know how to properly use F6 and load the drivers for it?

  I found a lot of messages suggesting I copy the installer to the HARD disk and launch the installation from there. My problem is that the XP installation is an upgrade CD, so I will ask you at a certain time to insert a previous Windows CD and if at that time there I don't have a working CD-ROM drive...

  First post on this forum so be nice - I did a search but not find a thread with a real solution, but of course if I miss a please report!

  Edited by topic: beneix_1

  Hello

  I managed to install Windows XP Home the Portege 2000 using the PCMCIA reader but I ve used recovery disks original Toshiba which includes the correct driver for external optical drive.

  So far I tried not to install Windows XP Home edition, using the Microsoft installation disc.

  Maybe you should get the disks of facilities and not use this upgrade disk. I think that on this path, you will be able to install WXP as suggested when you copy data from facilities at the disk directly.
  Have you tried to get the original recovery disc Toshiba WXP?

• OfficeJet Pro 8000: installation of the driver wireless Officejet 8000 Pro says default gateway is 0.0.0.0

  I'm chasing a well-documented problem of my printer lost network connection after a variable period of printing to do not. The only way to connect is to change the power supply, but the printer may take 5 minutes to blow and grunts until it settles and prints...

  I put a static IP address on the printer (10.0.0.250) as well as an empty default gateway successfully, and the documents are printed after 5mins of blowing and grunting (save the regular lost connection which I'm hunting...).

  I put what I thought has a static IP address on the router to match (see image below), but now I don't know if it was necessary, and if the 'hosting of the fixed DHCP server' is correct. It might be useless and missleading...

  Using the configuration of the printer to 10.0.0.250 interface, it seems to accept the installation of the network when the default gateway is blank. With the help of 10.0.0.2 caused the 'page not found' error in my browser (Chrome).

  However, when you try to reinstall the drivers, the installer has grumbled to the default gateway is set to 0.0.0.0, which currently is the only way it will work...

  The Win7 PC is plugged into the router.
  The printer wireless to the router.

  ipconfig on the pc gives Ethernet card details below.

  So basically I have no idea what I'm doing...!

  ==============

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  Link-local IPv6 Address...: fe80::c8e1:63ef:85e0:7 24% 13 c.
  IPv4 address...: 10.0.0.249
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 10.0.0.2.

  Router config.

  

  Thank you for your comments. It seems that I solved the problem of the default gateway. Time will tell if the remains of the printer connected through long periods of no use (see update below).

  It seems that the configuration of the router of the "DHCP fixed existing host" has nothing to do with the device assigned a static IP address. In fact, it seems that this setting prevents the printer through a default gateway of the router address.

  I noticed that when you give the PC a fixed IP, it connected through the router without any other configuration of router. If I reasoned that it may be applied to the printer also, so I moved the printer 10.0.0.251 and Bingo! the default gateway can be set to the IP address of the route.

  Since then I downloaded to other updates, which is supposed to correct the common problem of wireless printers, loss of the connection.

  I'll try to report in the next few weeks an update about the stability of connection network printers.

  UPDATED: May 23, 2016

  And more of the foregoing, my router support suggested I increase a parameter "timeout" from 24 hours to 10 days. I did it more than a week. Today, the printer worked after the impression of not for about 5 days

• Satellite L875-13D - problem with the installation of the wireless card

  Hello

  I bought a Toshiba Satellite L875-13D. I installed Windows 7 Enterprise edition.

  I have a problem with the installation of the wireless card. I have downloaded the driver on Toshiba website, but it does not work. When I run the file .zip and .exe, nothing happens. In addition, there are several pilots: Athos, Intel and Realtek and I do not know what is mine... I test all the driver but same result.

  I have the same problem with Bluetooth driver that does not work too.

  Thank you for your help.

  > But it does not work yet for Bluetooth,... I have install the driver by the .exe from the Toshiba Web site but when I run the application, I have error that says missing tosbtapi.dll. I founded and downloaded and installed on budget3 and SysWOW. But after that, the installation is blocked. Any ideas?

  Laptop Satellite L875-13D isn t equipped with Bluetooth.
  Didn t you know who?

• Question about the installation of the OS

  I have some problems with the shortcut keys and I want to reformat my system.
  Problem is that I have not created recovery cd before, is this going to work if I do it now.

  Thank you

  Hello

  Please don t worry about the recovery procedure. It's very simple to do. Put the recovery CD in the CD/DVD drive, start Notepad and press C button and hold it for a few seconds. This will force your unit to boot from the CD/DVD drive.

  Follow the instructions on the screen. Standard mode will erase the whole HARD drive and create a partition. If you have only one partition I recommend to set up two of them. One will be used for the OS and application installations. The other can be used for the backup of data.

  If you need more instructions, please write again.

• Re: Where to find the installation of the driver so that the Satellite A500 - 14q?

  Hello...

  I use Toshiba numere for awhile now and I never really paid attention to the order of installation the installation of the drivers.
  Now, I'm doing some research around this forum and discovered order 'is' somewhat important. or not?

  I just usually begin as desktop:
  Chipset, graphic, audio, and then all the rest. OK, toshiba must also have this addon of value, but I never installed in a specific order.

  So, the question is - where to find that my current machine (a500 - 14q) and my future one (p775.10j)?

  Thank you very much...

  Hello

  The order of installation is important if you are installing the tools of Toshiba.
  Some tools require installation of other tools.

  I looked into some of this forum for similar topics and found some details:
  Order of installation of Win 7:
  1 Windows 7 64 bit
  2 Intel Chipset SW Installation Utility 9.1.1.1019
  3 Intel Matrix Storage Manager 8.9.0.1023
  4 AMD driver 8.634.1 - 090729 a-086065C-Toshiba to display
  5 NVIDIA HD Audio Driver, 1.0.0.55
  TOSHIBA 6 utility 1.63.0.7C supervisor password
  7 TOSHIBA HW Setup Utility 1.63.0.11C
  Utility support 1.63.0.4C 8 TOSHIBA Flash Cards
  9 Realtek Audio Driver 6.0.1.5904
  10 Intel Wireless LAN Driver 12.4.1.11.0.s64_wCAT
  11 Synaptics Touch Pad Driver 14.0.1.1
  TOSHIBA Software Modem 2.2.97 12 (SM2297ALS03)
  13 Toshiba HDD Protection 2.2.0.2
  14 Bluetooth Stack for Windows by Toshiba v7.00.08 (T)
  15 Realtek LAN Driver 700.305.222.009
  16 Jmicron 1.00.32.01 card reader
  17 Sleep USB TOSHIBA and 1.2.3.0 service fees
  Facial recognition TOSHIBA 18 V3.1.1
  19 TOSHIBA eco Utility V1.1.11.64
  20 Sun Java2 Runtime Environment 1.6.0_14
  21 TOSHIBA HDD/SSD Alert 3.1.64.0
  22 TOSHIBA Service Station V2.1.33
  Control HDMI 23 2.0.0.1.64 Manager
  Manager remote control TOSHIBA 24 3.0.0.0
  25 TOSHIBA SD utility 1.9.1.12
  26 TOSHIBA PC Health Monitor 1.4.1.64
  27 TOSHIBA Fingerprint Utility 1.0.2.9
  ConfigFree 28 8.0.23
  29 TOSHIBA Web Camera Application, V1.1.1.4
  30 TOSHIBA Software Modem region Select utility 2.3.0.13
  31 TOSHIBA Network Device ID registry tool 3.0.32.4
  32 TOSHIBA Bulletin Board 1.0.04.0
  TOSHIBA ReelTime 1.0.04.0 33
  Memory SD 34 V1.9.1.12 utilities
  35 value package V1.2.26_64

• Satellite Pro C70 - B - 12 c - installation of the Package of added value

  Hello technician,

  could someone explain how to install the PPV on the Satellite Pro C70 - B - 12 c.
  I installed Windows 7 on the new Machine and want to use the utility function key.

  I downloaded the compatible vap on the driver download site. In the next step, I tried to install the PPV on the Archive of Toshiba Extractor. If I let install it automatically, I m only get the ODBC Driver-Installation Windows. So I canceled the Installation of the ODBC driver - and start the program installation of archive extracted.

  After the complete Installation, the function keys and the utility of the Flash card can be used. But the Flash card utility displays badly on the assigned keys functions. for example, on the keyboard the F11 key shows the power of the speaker function.

  The Flash Card utility indicates the Escape key for the same function switch (speaker). After the Installation of the vap, none called buttons work.

  I ve tested the function Key Utility for Windows 8.1. But this test was unnecessary.

  Thank you very much for your help!

  Hello

  Installation of VAP is not very complicated.
  You need to download the package.
  Save it to the disk (to office) and unzip the package (right click on unzip)

  > In the next step, I tried to install the PPV on the Archive of Toshiba Extractor.
  I m just wondering what you mean by install over?

  As I said earlier, after a clean install of Windows 7, you could install the VAP. But first this package must be decompressed. To decompress the package, you can use a program like WinRAR or WinZip

• Setup error during installation of the package of added value

  I just installed PVAT v 1.2.40. However during the installation I get an error - Setup PVAT Error (Ox8145030B). I have also tried to re - upload the files, and then repeat the installation with the same result. All ideas

  Richard

  Hi Rpayne32,

  What laptop you have exactly?
  Where did you downloaded package of added value?
  The operating system that is pre-installed in Toshiba or your own installation of Windows that you are using?
  Try you added value package update or new installation?

  In my opinion, you should check your antivirus or firewall. I think that something is blocking the installation.

• My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it

  My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it does not work either.

  This general situation may be similar to what is mentioned in this sequel to thread of the CSA

  and if the remedy is to use instructions; detailed and I hope they are correct...

  Re: Restart fails after installation of El Capitan help!

  Or you can try and see on the repair of the system and then if your disk utility can

  See the Macintosh HD, as a boot volume, you could restart from OS X Recovery to

  the Mac system, to see if this solves the problem. There may be more than one cause.

  You could try and boot into OS X Recovery, utilities out there, and other options are available.

  • OS X: on OS X Recovery - Apple Support

  This example uses a special partition on the hard drive of recovery which is not in the

  same disc that the Mac OS X section; However if your hard drive is missing, these other

  items may also be at risk. You must have and maintain backups of your duplicate content

  on the external storage drives closed; In addition, a Time Machine backup helps to restore.

  • Apple OS X and Time Machine tips:

  http://pondini.org/OSX/home.html

  • Tips for OS X - using HD recovery:

  http://pondini.org/OSX/RecoveryHD.html

  {Using the utility disc and other tools can be done from the boot OS X Recovery volume

  Beware of the fact these tools can also delete or reformat your content; wiping.}

  Don't know what to say; you could see visiting an Apple store with genius if

  There is an official store. Usually for best time planning you would contact them for an appointment.

  • Make an appointment at an Apple Retail Store Genius Bar
  • Find an Apple authorized service provider
  • https://locate.Apple.com/country - Apple - find places - selector of country (if outside the U.S.)

  Or if there is no official retail Apple Store with genius, the following suggestion would be to contact

  a service provider authorized Apple, an independent specialist who is qualified in the repair of Apple.

  In any case...

  Good luck & happy computing!

• Re: Satellite U400: operating system not found then the installation of the OS

  I have a toshiba satellite u400 with is come with VISTA.

  Because I don't like VISTA, I then installed WINDOWS XP with a multi boot.

  Everything worked well. But one day I want to resize my partitions I used Paragon partition manager.
  This product is required to operate only to resize my xp partition, so he asks me a start.

  And then nothing works.

  I try to fix my problem with a fresh install, but it seems that the boot sector was not correct.
  Then I completely format my hard disk on another computer with a USB CABLE.

  When I try to install VISTA, XP or LINUX on a CD or DVD, I ask the multiboot with F12
  I chose to boot from the CD/DVD built-in, but I get only "OPERATING SYSTEM NOT FOUND',

  It's as if the BIOS test the HARD to FIND something specific, and it does not find.
  When my PC worked correctly I could boot from the drive to dvd without problem.

  I called the SUPPORT CENTER of about 10 days, but I have no answer.

  So if someone could help me.

  Thank you.

  Hello

  OPERATING SYSTEM NOT FOUND message appears generally if the laptop has attempted to boot from the HARD drive and didn t find the operating system.

  But I put t understand why you formatted the HARD drive using the USB cable?

  Please insert HARD drive in the Bay of laptops HARD drive and check if the HARD drive is recognized in the BIOS!
  If the HARD drive has been recognised so I recommend you to take a disk Win XP Home and at the start of this disc.

  As I m not wrong not you will need to first install the SATA drivers to recognize the HARD drive.
  The fact is that the laptop supports the SATA controller and SATA drivers are needed to get the HARD drive recognized by Win XP.

  Well, after you have booted from the Win XP disc you need to format the new HDD by using the NTFS file format and should then follow with the installation of the OS.

  Check it out