change report of transformer problem convergence

Similar Questions

• Change username and logout problem - not supported

  When the user switching or disconnection of the screen becomes black and unsupported is in big letters white, it restarts the computer, I start windows normally, then a box just telling me I was expectantly stop and windows will search for a solution, I have 3 users myself as an administrator and two others, if I start it in safe mode, you can switch or disconnect any problems. I uninstalled the last program which had been installed and tried to do a restore of the days different samples about 5 times each time I also unplugged my external hard drive in case that was the problem

  Can anyone help please

  Each of the three towers of programs, services, and drivers in increasing amounts. So restrict the possible culprits.

  Clean boot

  Click Start - all programs - Accessories - run and type

   

  msconfig
  

   

  Then go to the Startup tab uncheck everything. Then go to the Services tab check hide all Microsoft Services and uncheck everything that is left.
   
  Reset. If this resolves your wake problem ½ of services / of startup items until you find that one.
  
  Tip clean boot

  If the above does not help.

  Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

  Start the program by right-clicking and choosing run as administrator and click on the menu Options - Filter Options and check hide Microsoft entries and disable include the empty slots. Go to the all tab and uncheck everything to the left.

  Reset. If this resolves your wake problem half of the items until you find the one that.

  Blue screens are caused by defective material or defective hardware drivers.

  To see if a fix is available

  In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution. You can also right-click and choose Details for more information. Post these details here.

  To see if any recent system change caused it

  In Control Panel (and select Classic discovered in the left pane) choose Administrative Tools and then choose reliability and performance monitor and choose the monitoring tools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date (scroll left to see earlier dates). See if your plant has started to happen after you installed or uninstalled something.

   

  Standard hardware troubleshooting

   

   

  First to test we can the material. Material defects can appear as many software defects, that's why we need to test the material first...

   

  Follow these steps in order. Defects of memory can cause disk corruption, disk failures can cause corruption of the disk. Damaged disc causes corrupted files (which SFC may be able to fix). If you get a stop error and after return. Do not run chkdsk with faulty memory.

   
  Diagnosis of memory

  If you have not run a diagnosis of memory, please do. Click on Start - Control Panel - choose Classic view in the left pane - choose Administrative Tools - then memory diagnostic tool.

   

  S.M.A.R.T
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   
  Disk in Windows drives monitor for impending failure. The function is called S.M.A.R.T. It detects an imminent failure, 30% of the time. In a type elevated command prompt (it's a single line)
   
  WMIC PATH MSStorageDriver_FailurePredictStatus /namespace:\\root\wmi get active, predictfailure, reason List

   

  If it is on will be true, otherwise on enable in the BIOS of the computer.

   

  Predict the failure must be False if everything is ok.

   

  In Vista and later if SMART failure predicted Windows prompts the user to run the backup.
   
  Run chkdsk

  In computer all your drives right click and choose Properties, then the Tools tab, and then click check now. Check the TWO boxes and then start. Reset. This will take from one day to the next.

   

  SFC

  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

   

  sfc/scannow

   

  Heat

  Heat can lead to problems of this kind, and sudden restarts without crashing. Make sure that your fans are not clogged with dust.

   

  For memory diagnostic results

  Click on Start - Control Panel (and select Classic view in the left pane), select Administrative Tools and then Event Viewer , and then look in the event (Local) - Applications and Services - Microsoft - Windows - MemoryDiagnostic-results Viewer entered.

   

  Look for EventID is 1201 or 1101 and Source is MemoryDiagnostic-results

   

  Double-click the entry for more details on this entry.

  For results of Chkdsk

  Click on Start - Control Panel (and select Classic view in the left pane) choose Administrative Tools and then Event Viewer , and then look at the Application and the System will connect (under Windows logs) for entries.

   

  Look for EventID is 7 and Source disk
  Look for EventID is 11 and the Source disk
  Look for EventID is 51 and Source disk
  Look for EventID is 52 and Source disk
  Look for EventID 55 and Source is NTFS
  Look for EventID is 130 and Source is NTFS
  
  Look for EventID 1001 and Source is Autochk
  Look for EventID 1001 and Source is Winlogon
  Look for EventID 1001 and Source is WinInit
  Look for EventID 1001 and Source is Chkdsk
  Look for EventID is 26212 and Source is Chkdsk
   
  Double-click the entry for more details on this entry.
   
  PS 7 and 55 are auto repair codes where windows repair disk errors silently on the fly. 52 is the SMART warning.
   
  For the results of the SFC
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "

   

  It will be able to see which files are corrupted.

   

  To see if there

   

  findstr/c: "[SR] repair" %windir%\logs\cbs\cbs.log|more

   

  There are often false positives for small text files that Windows uses like settings.ini and desktop.ini. Ignore these.

   

   

  Dump files

   

  Dump files are files containing the status of the machine when it crashed. We can analyze the file to identify the driver (or program) causing the accident. See the last section on how to get them analyzed by a volunteer.

   

  Analyze dump files

  If you want to analyze your own dump files.

   

  You need start exploring as an administrator to access the files in C:\windows\Minidump. Explore a right click and choose run as administrator.

  
  Download and install the debugging tools for Windows

  http://msdn.Microsoft.com/en-us/Windows/hardware/hh852363

  Install Windows SDK, but simply choose the debugging tools.

  Create a folder called symbols in C:\

  Start Windbg. Menu file - path to the symbol file and enter

  
  SRV * C:\symbols* http://msdl.microsoft.com/download/symbols

   

  Close, and then reopen WinDbg. Menu file - Open Crash Dump

  It will analyze the crashdump. You must close and reopen WinDbg for each analyzed dump file. Because you download symbols from the internet WinDbg seems to be to do nothing. But it's the download. Be patient.

   
  Looking for a driver or a library system that the incident occurred at the end of the list. Find the file, do a right click then Properties - Details tab. If it shows a driver, you will need to update the driver identified. Most of the pilots are in c:\windows\system32\drivers.
   
  Look for the drive for a file.
  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type by replacing drivername.sys by the name of the file (or copy and paste by clicking in the command prompt window and choose Paste).

  dir c:\ drivername.sys/a/s

   
  If it has a file system see if you can get a program to analyze - v.

  Type in the theWinDbg command prompt

   
  ! analyze - v

   

  -v means Verbose and if the accident was created by a program, as opposed to hardware or a driver, it will appear in the middle of the list.

   

  for example

   

  Nom_processus: java.exe

  Nom_image: ntkrnlmp.exe

   

  Nom_processus does not appear in the output of v - analyze and only if a program is from the call that was blamed.

   

  Download them for analysis

   

  Or download files minidump to your Public SkyDrive folder and copy the link in the address bar, and I'm going to do an analysis.

   

  SkyDrive is the download file from Microsoft, Windows Live, at https://skydrive.live.com/site.  Read about it at http://explore.live.com/skydrive.

  If you downloaded one of the Live applications or a web site based Live mail account, you already have access to your Skydrive.

  Put your list of events in the Public folder and copy the link in the address bar.

• Why not a problem in iTunes only allows you to report a 2 problem?

  Why ITunes reported that a problem with the purchases you to only report a problem only 2?  I ordered 4 episodes on television and got 4 wrong.  Could report only 2.  Then had to go to Apple Support for asking again.

  You need to ask why Apple, we are fellow users on these forums.

• Has had a phone call saying that my computer has sent warning messages. They want to guide me through the changes to stop the problem. Is it a scam?

  Has had a phone call saying that my computer has sent warning messages. They want to guide me through the changes to stop the problem. Is it a scam?

  It's a scam. Give them nothing.
  Contact your local police.

• How to report the BIOS problem?

  Hello

  is it possible to report the BIOS problem so that a person of HP it will read and the problem will be solved if all goes well?

  To be concrete, there seems to be problem in BIOS F.02 installed on HP Mini 5103 causes of freeze if it has plugged the USB key with 'recursive partitioning' at startup. As a result, it is not possible to boot from live USB which was created from some ISO hybrids (e.g. direct ISOs of OpenSUSE recent). Since there are not many options to install the system on netbook, I think it is serious problem. My previous netbook Lenovo Ideapad S10 - 3 and also my work laptop and desktop have no problem to start with the USB stick containing "recursive partitioning", so it's certainly a problem (hopefully not feature) this concrete machine/BIOS.

  Thank you

  That's ok on the Bravo, I did nothing to help you again.  This link is for questions of security, but it is also for the firmware, so you can get away with sending them a note here:

  https://h41268.www4.HP.com/live/index.aspx?QID=11503

  - Or call them.

  http://welcome.HP.com/country/us/en/contact/phone_assist.html#section1

• How to dynamically change report style sheets in TestStand.

  How to dynamically change report style sheets in TestStand.

  
  

• Some icons in my computer, in Windows Explorer on the desktop, or on the Quick Launch bar change randomly. This problem occurs if the icon cache is not updated correctly. How can I rebuild the icon cache solves this problem

  Some icons in my computer, in Windows Explorer on the desktop, or on the Quick Launch bar change randomly. This problem occurs if the icon cache is not updated correctly. How can I rebuild the icon cache solves this problem

  http://www.Vistax64.com/tutorials/117229-icon-cache-rebuild.html

  How do I rebuild the icon Cache in Vista

  See you soon.

  Mick Murphy - Microsoft partner

• Multiple reporting of test problems in TestStand 4.1.1

  We lack TestStand 4.1.1 and LabVIEW 8.6.1.  We have a vast repository of production and test fixtures, with lots of code-sharing and others.  We build installers for all of our tests and deployments every night with a build server automated.  We have newer versions of the TestStand, LabVIEW, but due to process bugs in TestStand deployment (and installer of construction), we can use them with our footage/projects/workspaces.

  We have traditionally been configured to test as html reports, because it is easy to visualize the reports not only on the test set-up, but on any other platform.  The problem is that the html reports are difficult to analyze programmatically.  To do this, you really want the report xml format.  The problem is that the xml reports require a style sheet, and the viewer only, we have learned to work is Internet Explorer.  It's not very portable, especially on platforms.

  So we got the mandate to produce test reports in both formats.  I found a thread here describing how in TestStand 3.5.1 and started with the model of update sequence posted in this thread.

  http://forums.NI.com/T5/NI-TestStand/create-two-TS3-5-reports-XML-and-ATML/TD-p/471394/page/2

  I need to edit the SequenceModel file, and some mods are also required in the ModelSupport.seq file.  I don't want to change the default settings, so I make copies of the files and specify that my sequences use modified versions.  Thus, the process I use so far goes like this:

  . Copy the file

  C:\Program NIUninstaller Instruments\TestStand 4.1.1\Components\Models\TestStandModels\ModelSupport.seq

  TO

  C:\MyWorkingDirectory\ModelSupport_multiReport.SEQ

  . Download SequentialModel.seq from this thread
  http://forums.NI.com/T5/NI-TestStand/create-two-TS3-5-reports-XML-and-ATML/m-p/471394

  . Copy the file to
  C:\MyWorkingDirectory\SequentialModel_multiReport.SEQ

  . Open the sequence above in the sequence editor
  . under the following subsequences, there the integrated sequence called ModelSupport.seq sequence request.  You must redidrect these calls to use
  C:\MyWorkingDirectory\SequentialModel_multiReport.SEQ

  . sequence calls that may be needed are found in
  Test DUT
            
  Simple pass
  Configure the report Options (call to the "Configuration of Report Options")
  Configure the Options of SecondReport (call in the "Configuration of Report Options")

  . create the directory
  C:\Program NIUninstaller Instruments\TestStand 4.1.1\Cfg\SecondReportDetails
   
  . Note that the "Cfg" directory is a shortcut to
  C:\Documents and Settings\All Users\Application Data\National Instruments\TestStand 4.1.1\Cfg\

  . in SequentialModel_multireport.seq, find references to
  "C:\\Program Files\\National Instruments\\TestStand 3.5\\Cfg\\SecondReportDetails"

  and change them to

  "C:\\Documents and Settings\\All Users\\Application Data\\National Instruments\\TestStand 4.1.1\\Cfg\\SecondReportDetails"

  . There are several references
  . Test the DUT-> Get 2 Report Options
  . Single pass-> get 2nd Report Options
  . Configure the Options of second report-> Edit Report Options

  . After making the changes, check in your main sequence
  . Configure-> second report Options
  If the configuration window starts, all is ok so far.

  . Change the sequence file to require different model
  . Change-> sequence file properties, Advanced tab
  . Model-> specific model required
  . Go to the
  C:\MyWorkingDirectory\SequentialModel_multiReport.SEQ
  . Ok
      
  Finally, the problems:

  1. normally, when you run the sequence in "Test UUT" mode, when you stop (from the serial number prompt USE), the last test result appears in a pane view in sequence or the test Executive Editor, who ever you happen to use.  This causes a "TempReport.html" file to be generated in the reports directory, and normally, this file is deleted when reject you the report viewer.  This deletion occurs is no longer, and the directory will start to accumulate files "TempReport_0002.html," "TempReport_0003.html".  It is not desirable.  I went looking through the template and related files, but could not find where the temporary file is created or deleted, nor I could find where the viewer within the sequence editor is called.

  2. If the first report is html and the second is in xml format, the resulting xml file can no longer be read or in the sequence of the other editor or test the view of the Executive or in Internet Explorer pane.  The message in IE is:

  The XML page cannot be displayed

  Cannot view XML input using XSL style sheet. Fix the error and then click the Refresh button, or try again later.

  Error running Microsoft JScript 'null' is null or not a subject line = 381, col = 3 (line is offset from the beginning of the sc...

  I checked, and there is nothing unique or commonplace online 381.  Column 3 is a space, and the rest of the line contains data used elsewhere and only some ordinary tags.  If the order of the reports is enabled, the xml report is visible in the view report sequence editor and through Internet Explorer.  (In other words, do the first report of the xml file and the second the file html.)  Now, I know what you think.  "Doc, does it hurt when I do this.'" " Well, don't do that! "If it works one way and not the other, use the way that works.  My concern, however, is why the resulting xml data files differ?  If I let this slide, it will come back as a big issue later, after that the memory of how I created this so is cooler?

  3. If I pull up to configure-> Options pane of report in the sequence editor, finish, so don't wait several seconds before pulling up to configure-> second report Options, the editor of sequences often disappears from the desktop.  A few seconds later, I get that annoying dialog box 'Do you want to tell Microsoft about the problem?' that appears when a program crashes and dies.

  If anyone has come across this, or how to fix it?  Thank you.

  M

  Hello

  I was not able to get the files that you use to work, but I found a model of different sequence on our DevZone page that works for me, trying to create two different reports.  It can be found here:

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/3278

  As it says in the instructions, simply change the local variable called 'DisplayedReportFormat' in the file tworeportssequentialv30.seq on "html" or "xml" to change the output type of the second report.  The first type of report is normally configured via the menu.  Also, be sure to change the options of station to use this model.  I have confirmed that it works and that the temporary file is also deleted every time.  I hope this helps!

• computer - cannot change to Classic view problems

  original title: computer problems

  Hi my computer is going crazy all of a sudden that my Start menu seems to have changed to Classic view by its self. Then when I tried to change back to normal look, he's not here. I keep all of my updates to day and stay away from websites that are harmful. I have vista and IE8. Also my norton virus alerts have been telling me that a recent attack has been blocked, explore more than normal even if the internet is off. Have I been hacked or infected by a virus I don't know please help to about.

  Hi my computer is going crazy all of a sudden that my Start menu seems to have changed to Classic view by its self. Then when I tried to change back to normal look, he's not here. I keep all of my updates to day and stay away from websites that are harmful. I have vista and IE8. Also my norton virus alerts have been telling me that a recent attack has been blocked, explore more than normal even if the internet is off. Have I been hacked or infected by a virus I don't know please help to about.

  RE: Start menu seems to have changed to Classic view

  Right click on the Start button > properties > click Start tab Menu > click on the dot to Start Menu > you should see a blue dot on the front now. Yes?
  Click OK when finished.

  RE: possible virus attack.

  I think that your Norton had done his job.
  But, if you want additional coverage, suggest you download and install malwarebytes.

  http://en.kioskea.NET/Download/Download-105-Malwarebytes-anti-malware

  Once installed, open malwarebytes > it will prompt you to update. Click Yes and let it update. If it's not hum update you, click Update and make an update > click Scan > click perform complete scan > it will take a while > it will give you a report summary at the end.

• reports on the problems and solutions has stopped working message all the time

  I can't access the control panel reports of problems and solutions and constantly get one - problem reports and solutions has stopped working, message on the screen.

  How can I disable or fix this problem.

  Hi NickMeyer,

  1. have you made a recent software or hardware changes to the system?

  You can check if there is information in Event Viewer which may help us to solve the problem:

  What are the information contained in the logs of the event (Event Viewer)?

  You can also temporarily disable the security software and firewall installed on the system and check if the problem persists.

  Note: Be sure to enable the security software on the computer after checking.

  Hope this information is useful.

• Report of WGA problem

  Separated from this thread.

  Thanks for the reply. This copy of the report, please note that part of it is in Portuguese, but according to me, is pretty explicit for some a regular. If you need, I think that I can change the settings to make it work all in English. I also noticed that the product ID is exactly the same as on the first post on this thread by Ms. Anita O'leary, which is troubling. This is an indication that our products were counterfeits? Should I open a new thread here int?

  The COA said Windows 7 Pro OA LATAM, but I can't identify an explicit version number, but there are some numbers outside the product key that I don't know if I need to mention here.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Code of Validation caching online: 0x0
  Windows product key: *-* - 76HMH - M4RKY-V4HX6
  Windows product key hash: CegQyzk5Zd0qxFdtmueCy9UmviY =
  Windows product ID: 00371-OEM-8992671-00013
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {05524FFF-12CC-411F-8448-290F1EAE9F24} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.140303 - 2144
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE; Win32)
  Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\slui.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100

  Other data-->
  Office details: {05524FFF-12CC-411F-8448-290F1EAE9F24}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-V4HX600371-OEM-8992671-000132S-1-5-21-1234099132-1245772486-138238240SAMSUNG ELECTRONICS CO., Ltd.. RF511/RF411/RF711 American Megatrends Inc.. 10HX. M034.20110426.ssh20110426000000.000000 + 000505E3207018400FE04160416Hora oficial Brasil(GMT-03:00)03SECCSDLH43STAR109

  Content Spsys.log: 0 x 80070002

  License data-->
  Versão Serviço licença software: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Identificacao da Ativacao: 50e329f7-a5fa-46b2-85fd-f224e5da7764
  Identificacao da size: 55c92734-d682-4d71-983e-d6ec3f16059f
  Estendido PID: 00371-00178-926-700013-02-1033-7601.0000-2092011
  Identificacao da Instalacao: 000540431384196715761995030134126416230286761951553132
  Do Certificado Processador URL: http://go.microsoft.com/fwlink/?LinkID=88338
  URL Certificado da Máquina: http://go.microsoft.com/fwlink/?LinkID=88339
  Da licença of Uso of the URL: http://go.microsoft.com/fwlink/?LinkID=88341
  URL do Certificado da Chave Produto (product key): http://go.microsoft.com/fwlink/?LinkID=88340
  Chave Produto (product key) Parcial: V4HX6
  Status da licença: Licenciado
  Contagem remaining rearmacao do Windows: 3
  Confiavel Hora: 12/12/2014 12:30:18

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0x000000000001EFF0
  Event timestamp: 12:11:2014 21:03
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\sppobjs.dll
  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
  Altered the file: %systemroot%\system32\sppwinob.dll
  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
  Altered the file: %systemroot%\system32\drivers\spsys.sys

  --> HWID data
  Current Hash HWID: OAAAAAEAAQABAAIAAAADAAAABQABAAEAonZsqX6egjq48cq + Or8s4q5mrA9S2VQtKAriwoIhLnM =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC SECCSD LH43STAR
  FACP SECCSD LH43STAR
  HPET SECCSD LH43STAR
  MCFG SECCSD LH43STAR
  SLIC SECCSD LH43STAR
  SSDT PmRef Cpu0Ist
  SSDT PmRef Cpu0Ist
  SSDT PmRef Cpu0Ist
  SSDT PmRef Cpu0Ist

  See notes http://support.microsoft.com/kb/3004394 - it is not advisable to uninstall the update if already installed because it can cause other problems.

  Since then, Ms released a new patch to address the problems caused bythe fix failed...

  http://support.Microsoft.com/kb/3024777

• Standard report, change report Total text

  Using APEX, theme 26 5, I have a report that I need to change the text and the color of the text report Total at the bottom of the report.  Try dynamic action of charge with the following JavaScript code:

  URL: https://glassfish1.revion.com/apex/f?p=4550:1:2140114088822:

  Workspace: homeworld

  Login: demo

  password: demo

  Request 271

  Page 1...

  As a result, that does not change... I thought that it worked in APEX 4.x, cannot test now because I don't have access to an instance of 4.x...

  Any suggestions?

  Thank you

  Tony Miller
  Los Alamos, NM

  No need for JavaScript or dynamic action (but I think that the distinction uppercase / lowercase is the problem with what you have there).

  Set the required total text of report are Label in the report attributes and specify the color to aid online page CSS:

  #emp-586 .uReport tr:last-child td:first-child {
    color: #c00;
  }
  

  See the second report, which I have added to the page.

• Report XML output problem

  Hello
  I am trying to execute the XML (work order print report eAM) report this report had parameters (name work order / on behalf of the work order) that allow me to run more State control work.
  but when I chose for example parameters
  Parameters: Name (UF1) work order / / / name of the order (UF5) work
  It must be good work 5 printing

  but problem is work order 1 print output only when I use the XML model alone, even if it must print 5 work as input parameters but the models show that 1 out of work order ...

  If I remove the template and change the output format of text report output run successfully.

  Thank you

  Thanks Farhan. problem solved by added repeating group.

• Transform problems of effect when used with the depth of the 3D layer

  Here is my set upwards.

  I have PreComp with graphics any illustrator with active continuously rasterized layer.

  This graph has a reflection in it. I was thinking by applying the effect processing, offset setting to-100 and by setting the anchor point.

  Regarding the graphics move from left to right (X, Y) there is no problem and anchor point is in its place.

  As soon as I do the 3D layer and start changing the values of depth thinking begins to jump around.

  My guess is - it happens that point because of anchorage is a constant value and because the thinking is based on its value it does not follow the base of the graphics. Purhasps it is a snippet of code to be used to bind the value of the anchor Point to the Zoom value? Adjustment of the values of anchor with keyframes turned out to be too difficult.

  In other words, I like to keep thinking at a constant distance from the base of the graphic part and once the relocation of graphics on or in the reflection does not follow.

  I précomposé this graphics and it imported into the new Compostion and applied movement XY and Z using the camera and Null layers. It was the same effect and reflection did not stick to the base of the graphic.

  I need to keep the collapse processing enabled on all consecutive Comps/PreComps to ensure that the vector art makes to high quality.

  What would be a good way to make a reflection of a 3D/preComp layer in the model where the movement controlled with layers of continuously active camera and Null, with the Transformations of rasterized/reduce?

  I'm with Mylenium on it. Your concept is inappropriate and you do it is much too difficult. Just put the anchor at the bottom of your reflection, then resize it to 100 in y [100, -100] can do the two 3D layers and implemented a matte degraded on the reflection layer.

• Firefox 18 and reported Windows 7 problems

  I have recently reported problems with Windows 7 patches who were charged on my Dell laptop, as well as of an automatic update of Firefox on 10 Jan.

  After restarting my system several times, Firefox works fine.