Installed to 1.7.0_40 and cannot start applications built previously.

Similar Questions

• Desktop PC's processor HP 251 - a11, Windows 10, AMD quad core A6-6310 accelerated with 4 GB memory DDR3 system and 500 GB hard drive. I installed I tunes last version and cannot operate.  Error message says Hello not activated.  Tells me to

  Desktop PC's processor HP 251 - a11, Windows 10, AMD quad core A6-6310 accelerated with 4 GB memory DDR3 system and 500 GB hard drive. I installed I tunes last version and cannot operate.  Error message says Hello not activated.  Tells me to go to the Control Panel then administrative tools and allow to Hello.  I followed these instructions, but I can't activate Hello.  What did wrong and how I can activate the Hello?  My email is * any help is greatly appreciated

  < email published by host >

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Windows Live Photo Gallery. error: Windows Live Photo Gallery encountered an error loading WLXPhotoviewer.dll and cannot start. Error code 0 x 80070015.

  original title: error code 0 x 80070015

  I have recently installed Windows Live Essentials 2011, and since then, I have been unable to open the .jpg files in Windows Live Photo Gallery.

  I get the following message:

  Windows Live Photo Gallery encountered an error loading WLXPhotoviewer.dll and cannot start. Error code 0 x 80070015.

  Any help would be appreciated.

  see you soon

  Dan

  Download and install this

  http://explore.live.com/Windows-Live-Photo-Gallery?OS=other

  If this post answers your question, click mark as answer .

• Windows live gallery encountered an error loading WLXPhotoViewer.dll and cannot start error code: 0 x 80070035

  Whenever I try to open a picture/photo, I get this message "Windows liver Gallery encountered an error loading WLXPhotoViewer.dll and cannot start error code: 0 x 80070035. Around her, the only is to save the file, then open it with another program. I'm frustrated because this is a nuisance and time-consuming. Any suggestions please?

  Maybe the exclusive database is corrupted.

  Read the following article.

  (944221) freezes Windows Live Photo Gallery
  or does not start
  http://support.Microsoft.com/kb/944221/en-us
  (according to version, database can be
  Pictures.PD4, Pictures.pd5 or Pictures.pd6)

  Rename the Pictures.OLD file will force Live Photo
  Gallery to create a new database on the next launch file.

  Know that the gallery will be as it was the first time that you
  open and some metadata and labels may be lost.

• Error: 0x800736b1, Windows Live Photo Gallery encountered an error loading WLXPhotoLibraryMain.dll and cannot start.

  Original title: error: 0x800736b1

  I can longer open Windows Live Photo Gallery, the message reads as follows: Windows Live Photo Gallery encountered an error loading WLXPhotoLibraryMain.dll and cannot start.

  Error code: 0x800736b1... has all had this before or know how to fix?

  Hi frazzlerrock82,

  1. you remember to make changes to the computer before this problem?

  You can check out the following link and check if it helps:

  http://windowslivehelp.com/thread.aspx?ThreadId=622dbee2-1e02-4A6A-a8e6-752458ecb3b9

  Also check out the following link and try the steps by Aaron G - support engineer Microsoft Support, Moderator on Wednesday, December 8, 2010 22:08

  http://social.answers.Microsoft.com/forums/en-us/vistaappearance/thread/ed7664d1-dac9-4EAC-bde7-11c990ff4539

  If you're still having problems, then you can check out the following link and post your quuery in the Windows Live Forum:

  http://windowslivehelp.com/product.aspx?ProductID=20

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I fix this error - Windows Live Photo Gallery encountered an error loading WLXPhotoLibraryMain.dll and cannot start - error Ox800736b1

  When I click on Windows live Photo Gallery to satart - I get the follwing messge.

  Windows Live Photo Gallery encountered an error loading WLXPhotoLibraryMain.dll and cannot start - error Ox800736b1

  How should I do?

  Hello

  The question you have posted is related to Windows Live Photo gallery and would be better suited to the Windows Live community. Please visit the link below to find a community that will support what ask you:

  http://www.windowslivehelp.com/product.aspx?ProductID=20

• Windows Live Photo Gallery. error: Windows Live Photo Gallery encountered an error loading WLXPhotoviewer.dll and cannot start. 0x8007007e error code

  Windows Live Photo Gallery. error: Windows Live Photo Gallery encountered an error loading WLXPhotoviewer.dll and cannot start. 0x8007007e error code

  Hello

   
  There seems to be a problem with the Windows Live Photo Gallery, it's better to post the same question to the Windows Live Photo Gallery site for assistance. We have a dedicated team to help you with such questions.
  Windows Live Gallery Portal: http://windowslivehelp.com/product.aspx?ProductID=20
   
  Hope the information is useful.

• [FIXED] WL library error start error: Windows Live Photo Gallery encountered an error and cannot start. Error code: 0 x 80070035

  Original title: error starting in WL photo library

  Hello guys,.

  I use the photo gallery of WL (latest version) for some time, but one day it stopped working without remembering any important changes that might break a.

  When I try to run it, it gives this error:

  ---------------------------
  Windows Live Photo Gallery
  ---------------------------
  Windows Live Photo Gallery encountered an error and cannot start.

  Error code: 0 x 80070035
  ---------------------------
  Ok
  ---------------------------

  I tried to reinstall it but without success. I've also renamed the files Pictures.pdX C:\Users\\AppData\Local\Microsoft\Windows Live Photo Gallery, but with the same result.

  Not to mention that the event log does not contain messages recorded on this subject and also the follow-up of the process with Process Monitor did not show anything that would tell me the cause of this problem...

  If someone from the Live team or an MVP watch that I can send you the output monitor process or any other information that you might find useful.

  Any other suggestions on what I can try next?

  Thank you!

  Chris

  I'm waiting for the confirmation of the guys from the Live team on this, but I've corrected this problem.

  The error came from the fact that Windows registry stalled Chronogram of some access roads network I had on my computer from a former WHS (Windows Home Server) box so basically, Windows Explorer - WL photo library was still trying reach these network paths, even if in Explorer / settings there is no references to WHS, so registry entries in neutral paths and wrong...

  Replace the data of those key in the Windows registry under the HKEY CURRENT USER corrected this problem and I was able to start WL photo library.

  :)

• I get the following "Install" error message is damaged and cannot be opened. You must eject the disk image.

  I get the following "Install" error message is damaged and cannot be opened. You must eject the disk image.  Looking for advice on how to install components.  Thank you.

  See the link below:

  https://forums.Adobe.com/thread/2003455

• I had mt PS CC to another screen and cannot return to the previous upper area is hidden how I get it back?

  I had mt PS CC to another screen and cannot return to the previous upper area is hidden how I get it back? @

  Thank you for the presentation of reports. It is important, that I don't know if what I'm proposing works or not.

  Gene

• After you have installed the Realtek drivers, I get code 10 error and cannot start sound.

  original title: help with my sound please

  After you have installed the realtek driver it says code error 10 can't start sound...

  also I can't find the button sound.video and games on the Device Manager heres the message in Event Viewer:

  Log name: System

  Source: PlugPlayManager

  Date: 17/05/2012-18:50:27

  Event ID: 12

  Task category: no

  Level: error

  Keywords: Classic

  User: n/a

  : My computer

  Description:

  The device ' in Build Conexant Type 2 modem "(HDAUDIO\FUNC_02 & VEN_14F1 & DEV_2C06 & SUBSYS_10250126 & REV_1000\4 & 37d33e44 & 0 & 0102) disappeared from the system without first be prepared for removal.

  The event XML:

   

     

      12

      2

      0

      0 x 80000000000000

     

      435

      System

      badimo-PC

     

   

   

      Modem Conexant - in the generation Type 2

      HDAUDIO\FUNC_02 & VEN_14F1 & DEV_2C06 & SUBSYS_10250126 & REV_1000\4 & 37d33e44 & 0 & 0102

      00000000

   

  Hello I want to,

  The problem you describe looks like you are maybe install the wrong driver for your sound card.
  Have you checked that the driver is for your specific device?
  If you look in your system's Device Manager, is there a yellow exclamation next to the audio controller?
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager
  If so, this seems to indicate that the drivers installed are not good for your sound card. Usually if you double-click the device in Device Manager, it will say something in the sense of "Device cannot start".
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Re: Equium A210-1AS - blue screen and cannot start

  My computer was working fine, I stopped him, the next time I start up, it shows windows loading screen, then a second a blue screen flashes by, it restarts and repeats, I stopped and began to tap F8 until the advanced boot options appears, safemode ect... None of them work and lead all the blue screen If I select the repair option at the top 'Repair your computer' it begins to load with a background of vista and a cursor and then displays the error "the installed program cannot start. Click OK to turn off the computer. »

  in Advanced Startup Options that I try "disable automatic restart in the event of system failure" and the rest of the blue screen to the top, so I can see, it shows an error on usual blue screen, read:

  UNMOUNTABLE_BOOT_VOLUME
  STOP: 0X000000ED (0X85DDA600, 0 X 0000000, 0XC000009C, 0 X 0000000)

  I don't have a recovery CD, as I believe, there is a recovery partition, but I don't know how to access it-
  I use Equium A210-1AS
  Part number: PSAFJE-005005KS
  Windows vista 32 bit

  Thank you

  I know know that the recovery partition is consulted theough 'Repair your computer' but shows just "the installed program cannot start. Click OK to turn off the computer. »  :/

  null

  > I don't have a recovery CD as I believe, there is a recovery partition, but I don't know how to access to this

  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=58

• A message box you informed that there is a problem with DirectX and cannot start Command Conquer 3 &.

  Original title: problem with starting game.

  I'm trying to play Command Conquer 3 & on my computer but cannot start the game, whenever a message appears saying that there is a problem with DirectX.
  The game needs min. DirectX 9 c I have so I do not understand the problem. I have Nvidia Gforce2 mx installed Gr.card so it should play without...?

  The game is C & C 3: Tiberium Wars

  Help, please!

  Hi ChrisNiven,

  1 Windows operating system you are using?

  2 have you tried to update the Nvidia drivers?

  Method 1:

  Check if there are problems with the DirectX installed on the system. Use DXdiag to troubleshoot all direct X related issues. DxDiag ("DirectX Diagnostics") is a diagnostic tool to test the features of DirectX and the problems of video material - or sound-related.

  For more information, you can consult the following article:

  Diagnosing basic problems with DirectX

  Method 2:

  You can also consult the following thread link and try the steps to solve the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-gaming/command-and-conquer-on-a-Mac-with-Parallels-6-and/c737a45b-7c91-458A-AAC9-66bff80236d1

  You can see the following link support Nvidia to download the latest version of the drivers.

  NVIDIA driver downloads

  Hope this information is useful.

• window cannot start applications and programs on my computer, Windows Firewall, internet explore and my antivirus can not be updated.

  After installing some games on my pc I started having problems with the eventviewer its been disabled. The DVD drive cannot be detected by the computer. Please help me as I'm about to perform a system recovery, but I need to know what causes this mulfunction. This is an error code I get when I try to run some applications in the Service of the administrative tools section. Error 1103, 1068 for Com and application code and code 0 x 80072 among others.

  Hello

  If the DVD drive is not detected, you won't be able to reinstall from a disk operating system or manufacturer's recovery disks. You need to check and see if the drive is seen by the system BIOS. Otherwise he, or the wiring connection must be replaced or the drive may be dead and must be replaced.

  For the rest of the problems, do what Mick has suggested and perform a restore of the system to a point prior to the installation of these games.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Get error 0x800106ba and cannot start Windows Defender

  Cannot start windows defender after installing Miicrosoft Security Essentials

  MSE disables Windows Defender from Vista:

  Microsoft Security Essentials has its own integrated version of the defender and it automatically disables the version of Vista in Windows Defender.

  If it's not:

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

  Turn Windows Defender on or off the information on the link above of Microsoft.

  Hope the foregoing explains the compatibility issues with Windows Defender and MSE.

  See you soon.

  Mick Murphy - Microsoft partner