Re: Equium A210-1AS - blue screen and cannot start

Similar Questions

• Blue screens and slow start

  My computer is currently running, but I had a devil of a time with him yesterday.

  Sometimes I will have a series of blue screen errors that restarts the computer. So, it will be fine. Sometimes I wonder if it is connected to recent updates (Windows, which are defined to automatic updates). Yesterday, when it restarted, it basically sat there and laughed at me. Startup Repair had no both times I have let it run. CHKDSK, which I had actually ran a few days earlier (because it had been some time) would be finished and end with "Unable to forward messages stored in the events with the 50 State."

  Finally, by frustration, I just left it alone and after a very long time, it has properly loaded Vista. At this time, I backed up every last file on a pair of external HDs that I usually do anyway, I had.

  I run a scan for viruses on a daily basis with AVG, Comodo as firewall and have like adware performance analysis with SUPERAnti-Spyware and Malwarebytes. None of them did anything about it, and since I'm not used to go to questionable sites even further, I think that it is nothing of this nature.

  The list of startup programs/applications is already bent to keep the computer just bogged down.

  I have not installed new hardware or software in the past months.

  The computer is a Dell Inspiron 1525, purchased in November 2008.

  Is this thing suddenly on me and die?

  Hello

  Many files that SFC cannot resolve are not important.

  Start - type in the search box-> find CMD in top - click right on - RUN AS ADMIN

  put the command from below (copy and paste) in this box and her and then press ENTER.

  findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt

  who creates the sfcdetails.txt file in the folder that you are in when you run it.

  So if you're in C:\Windows\System32 > then you will need to look in that folder for the file.

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  in Windows Vista
  http://support.Microsoft.com/kb/928228

  This creates sfcdetails.txt in C:\Windows\System32 find and you can post the errors in a message
  here. NOTE: there are probably duplicates so please only post once each section error.

  You can read the newspaper/txt files easier if you right click on Notepad or Wordpad then RUN AS ADMIN - then
  You can navigate to sfcdetails.txt (in C:\Windows\System32) or cbs.log (in C:\Windows\Logs) as needed.
  (You may need to search sfcdetails.txt if it is not created in the default folders.)

  I hope this helps.

• Equium A210-IC4 - white screen and force restart

  My Toshiba laptop is less than a few days out of the box and on its first day, the screen went white with various lights and again but he forced me to turn off and restart to start. Happened a few times today as well with the message saying "system does not not or was closed to protect the data.

  I noticed that there was some discussion on overheating, bios and vista bugs. I'll update all device drivers tonight and the bios and see if that cures it. I don't know if there is no way to verify it is overheating or even if it's Vista bugs?

  I'll let you know how me but if someone has an inspirational thoughts on issues please let me know.

  Concerning

  > I noticed that there was some discussion on overheating, bios and vista bugs. I'll update all device drivers tonight and the bios and see if that cures it. I don't know if there is no way to verify it is overheating or even if it's Vista bugs?

  If the laptop automatically stops then this problem could be linked to the temperature inside the laptop

  Usually an overheating may occur because don t cooling modules work correctly because of the dust and debris.
  But according to your message, the laptop is not very old, and the dust should t be a problem

  So in my opinion, you must contact the ASP in your country to control!

  Good luck

• On windows Vista, got blinking screen and cannot start a program in the start menu

  On my Vista, I can not select and start a program (for example Word in the desktop menu) because the view menu of the is a split second and closes immediately.

  The second screen flashes...

  The third symptom is when you access the WEBMAIL from my internet provider. I enter my user name and press "tab", but instead of going to the password, sinking a nopassword... and the system rejects my login... help

  Hello

   

  Method 1:

  Since you have several questions, you can try with the new user account and see if that helps.

  Step 1: Create a user account:

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If step 1 work, try step 2

  Step 2: Fix a corrupted user profile:

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

   

  Method 2:

  For problems with Microsoft Outlook, you can post the question here:

  http://answers.Microsoft.com/en-us/Office/Forum/Outlook

   

• Blue Screen BAD_POOL_CALLER cannot start the laptop after Windows XP updates

  My user has a Dell Latitude E6500 and after installing Windows Update, the laptop does not start in Windows XP.  Tried to repair, reinstall all Modes and each option we just get error BAD_POOL_CALLER not boot into the operating system.

  Reference Dell it's a software problem, probably caused by the update as no other changes have been made to the laptop.  Before we pay for Dell support software means someone has suggestions?  All options on Googling guess you can enter Windows in at least secure Mode that we can not so I'm stuck!

  See you soon

  See this article for some real good troubleshooting Info:

  0X000000C2: BAD_POOL_CALLER
  http://aumha.org/a/stop.htm

  Also:

  How can I solve this? (bad_pool_caller)?
  http://www.Tek-Tips.com/viewthread.cfm?QID=423270

• Cannot put computer to sleep without blue screen and crashed

  Hi guys, in the 3 months that my PC has been having this strange problem where seemingly randomly it selects to the blue screen and crashed. A few times, it was when I was not even at the computer, and no programs were running. Most of the time there will be a few moments after that, I chose the option to sleep, but also took place after I choose restart.

  My specs: Windows Home Premium 64-bit

  Intel core i3-4130 3.4 GHz

  8192 MB RAM

  2 AMD Radeon Crossfire 7790

  I thought I should also mention that I use a TV 48 "as a monitor screen.

  This is what usually happens after that my PC is recovering from the accident

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  More information about the problem:

  BCCode: 1000007e

  BCP1: FFFFFFFFC0000005

  BCP2: FFFFF8800F1256B5

  BCP3: FFFFF8800BD51308

  BCP4: FFFFF8800BD50B60

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\042315-6193-01.dmp

  C:\Users\Corey\AppData\Local\Temp\WER-28563-0.SysData.XML

  I really appreciate any help I could get with this. Thank you!

  It seems that you have an unstable BETA AMD driver installed.

  Value of the element
  Name AMD Radeon HD 7700 Series
  ID of device PNP PCI\VEN_1002 & DEV_665C & SUBSYS_E253174B & REV_00\4 & 2F87A1B6 & 0 & 00E4
  Adapter Type processor AMD Radeon Graphics (0x665C), compatible with Advanced Micro Devices, Inc.
  Adapter Description AMD Radeon HD 7700 Series
  Adapter RAM 1.00 GB (1 073 741 824 bytes)
  Installed drivers aticfx64.dll, aticfx64.dll, aticfx64.dll, aticfx32, aticfx32, aticfx32, atiumd64.dll, atidxx64.dll, atidxx64.dll, atiumdag, atidxx32, atidxx32, atiumdva, atiumd6a.cap, atitmm64.dll
  14.501.1003.0 driver version

  http://support.AMD.com/en-us/download/desktop?OS=Windows%207%20-%2064

  Crash details.

  The debugging session: 16:32:23.495 Thu May 7, 2015 (UTC - 04:00)

  Loading user symbols
  Loading unloaded module list
  .......
  Cannot load the image \SystemRoot\system32\DRIVERS\atikmdag.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for atikmdag.sys
  ERROR: Module load completed but symbols can be loaded for atikmdag.sys

  06/05/2015 15:49 Windows Error Reporting bucket Fault X64_0x7E_atikmdag! OsServices::pOsServices + 5, type 0
  Event name: BlueScreen
  Answer: No available
  Cabin ID: 0

  Signature of the problem:
  P1:
  P2:
  P3:
  P4:
  P5:
  P6:
  P7:
  P8:
  P9:
  P10:

  Attached files:
  C:\Windows\Minidump\050615-6411-01.dmp
  C:\Users\Corey\AppData\Local\Temp\WER-15350-0.SysData.XML
  C:\Users\Corey\AppData\Local\Temp\WER869.tmp.WERInternalMetadata.XML

  & #x000a

  Please go back to a previous version of the driver, linked below.

  Display Driver version 14.301.1001
  Driver OpenCL (tm)
  Catalyst Control Center
  HydraVision

  http://support.AMD.com/en-us/download/desktop/previous/detail?OS=Windows%207%20-%2064&Rev=14.9

• Cannot change anything in the action center error code and the blue screen and stops.

  I can't do anything on my computer with windows7 can not install updaets or sofyware of security I get an error code and the blue screen and stops

  OT:everytime I try to change anything whatsoever in the action center ndour windowws blue security and my computer shuts down

  Hey Chrisb,

  You did changes to the computer before the show?

  Step 1: I suggest to start the computer in safe mode and check if the problem persists.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: If the problem is solved in safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 3 of section of boot KB929135 to reset the computer in normal mode.

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Equium A210-1AS sometimes stops

  My recently purchased Equium A210-1AS sometimes completely cut and the screen is blank. Someone knows why?

  Maybe a little better explanation of the problem can help to better understand what's happening exactly and how many times.

• Equium A210-1AS: Touchpad problem - the mouse becomes unusable

  Hello

  I have problems with the touchpad of my laptop Equium A210-1AS.
  After some time of use of the mouse becomes unusable and just starts bouncing around the screen and becomes uncontrollable.

  The only solution then is to unplug the laptop and turn the power off, re start the touchpad works again.

  I use Windows Vista and downloaded the latest touchpad drivers.

  Any help would be appreciated.

  See you soon
  Widdy1961

  This problem very strange s.
  Could you please tell me if this problem occurs after you reinstall the OS from the Toshiba Recovery CD?
  I read on several forums of Vista that some Microsoft Vista updates may have a bad influence on the touchpad driver
  Therefore, it would be very interesting to know if this problem appears immediately after the use of the recovery CD.

  Greetings

• Equium A210-1as turns off during the Bios flash

  Hello group,

  My computer laptop girls off for a flash bios because of blocked fan (dog hairs dust etc.) and its fried bios chip.
  I think that there is a partition on the Bios chip which can upgrade the bios in a critical state of flash using combinations of keys.

  I tried all of this and have a laptop dead yet.
  I contacted someone on the net that sells preloaded Bios chips and instructions to replace them, but I must first of all identify the chip on the card.
  Is there any reading that can identify it for me on a toshiba Equium A210-1as... psafje-005005ks

  Thanks for any help Paul G...

  Hi mate

  Usually it s is not necessary to replace the BIOS ROM chip on the motherboard.
  In most cases, the ROM module has to be reflashed again.
  It seems that the module ROM was not properly flashed and the process interrupted
  The technician of the ASP can reflash the module using a disc of the BIOS crisis.

  I recommend you to get in touch with the guys from the ASP in your country and ask reflash BIOSES.

  Good luck

• Equium A210-1AS: Windows unexpectedI/Oerror bootmanager status took place

  Hi everyone, I really hope there, can someone help me today!
  My daughter is in the middle of her GCSE exams and has a problem with its Equium A210 - 1AS.

  It was working fine until last night and now all she gets while booting is:

  "Boot Windows display manager".
  Windows has encountered a problem communicating with a device connected to your computer.

  Thiserror can be caused by unplugging a removable storage device, such as an external USB drive while the appliance is in use, or by faulty hardware such as a hard drive or CD ROM drive which is a failure.
  Make sure that all removable storage is properly connected, and then restart your computer.

  If you continue to receive this error message, contact the manufacturer of the equipment.

  File: \Boot\BCD
  Info: An unexpected i/o error has occurred.
  ENTER = continue»

  She said she had her sex cam plugged and I tried to restart and reconnected, but this has not solved the problem.

  There, can someone help me please because we are desperate to work on his pc!

  Thanks a lot if you can.

  Kind regards
  A

  Hello

  > She says she had her sex cam plugged and I tried to restart and reconnected, but this did not solve the problem

  Is this means that the laptop can not boot Windows OS?
  Please disconnect any external devices. Then switch on and press F8.
  Now you should see the advanced boot menu.
  Please check if you start the machine in safe mode.

  Otherwise I recommend the BIOS.
  Ensure that the HARD drive has been recognized by the BIOS.
  If there is just no drive listed then the HARD drive could malfunctions.
  If the HARD drive is there, so you must set it as first boot device.

  If anything would help him, then a system restore would be desirable.

• Equium A60-191 - blue screen at startup

  Hello

  I have a laptop Equium A60-191. When I start it, I get a blue screen and it tries to re start it again. I started from my Windows CD and used the recovery console to fix the problem. He now works ok. However, the same thing that happened there are only 9 months.

  Has anyone seen this problem before?

  Thank you

  In my opinion, this kind of problem has thousands of PC users with all kinds of laptops and desktop PCs. really nothing exceptional and there is no reason that a why this happens.

  If now everything is Ok I see no reason to talk about this. Once again, if the same thing happen please report only and maybe we can discuss your problem.

  Bye and happy new year!

• Equium A110-276: blue screen of Windows Vista error

  OK, so I installed Vista and works perfectly until I got a blue error screen! I don't know what the problem is. What you think is the problem? Memory? BIOS? I updated my bios to version 5 for vista... I updated my computer from here http://pc-support.toshiba-europe.com/vista/

  Anyone know the problem?

  I use Equium A110-276
  1024 MB OF RAM
  Core Duo 1.67 GHz
  Windows Vista Edition Home Premium

  Help please! THX

  Blue screen and Windows nothing unusual. Am I wrong? ;)

  Sorry, but it is not easy to say what the problem is here. I use Vista for two months without any blue screens and you really can't wait until someone can give you a clear explanation here.

  Blue screen occurs due to different circumstances. May be software related conflict... Check out the software for some compatibility problems

• Question about the power of the battery on Equium A210-1AS

  Hello...

  the battery on my Equium A210-1as life is supposed to be around 2 and a half hour but it s more in 20 minutes.
  No idea why?

  That sounds like a bad battery.
  I think that Windows displays a fully charged battery or not loading stops at XX %?

  If your laptop is still under warranty, go to a local ASP and allow your battery to change.

  If your computer laptop doesn t have guaranteed, an ASP may also make a bid for a new battery. This part doesn't have to be so expensive.

• Equium A210-1AS - it gets hot after BIOS update

  Hey, I was wondering if anyone can help here...

  Currently have a Toshiba Equium A210-1AS with BIOS version 1.80 worm 1.00PARTTBL 08/04/2008.

  Given that BIOS has been updated for a long time in this version 1.80 the computer became hot very quickly and therefore the laptop performance declined.
  I looked on the Toshiba support site and upgrade only version 2.00 was not compatible with this laptop.

  Any help would be greatly appreciated. Short model number is PSAFJE
  Thank you

  Hello

  I checked the site Web of Toshiba and I didn't see any BIOS update for satellite A210 PSAFJE. This means that an update of the BIOS was never marketed for this laptop, normally.

  To me it sounds like that you have updated the BIOS with one version for another Equium A210. So, you should go to an authorized service provider. Technicians can install the right version of BIOS for you (downgrade).

  Good bye