Installed Vista pack 1 as prompted. Tour is continuing after 10 hours. Monitor says no entries, and falls asleep.

Similar Questions

• My desktop Dell - Vista - computer does not, the monitor says no entry and have to wake up computer

  I have a desktop Dell Vista computer.  A few days earlier, when I pressed the power button to turn it on, nothing happened.  When I turned on the monitor, he says that he came into power saving mode.  When I checked the monitor once again, he said that there is no entry for the computer and press any key of the keyboard or mouse to wake up.

  The computer is plugged in and the green light in the back is on.  I don't remember putting the computer to sleep.  I thought I made a stop for a few days in advance.  Press and hold the power button on the computer does not start it or turn it off.  There is no sound (such as a fan).  I unplugged the computer briefly a few times, and then I finally unplugged overnight and is plugged in.  Light lights up in the back, but is not the "num lock" key on the keyboard and the light under the mouse does not light.

  I checked a few suggestions on this site, but they all require that the computer be on and you enter in this form or the screen.  Is the computer dead?

  Thanks in advance.

  Hello

  There seems to be a problem with the hardware, I suggest you to contact Dell support on this subject.

  http://support.Dell.com/

• Problem installing Vista Pack 2

  I get updates for the installation of vista pack 2 but when I run Setup it don't. Please provide the solution.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  FYI -.

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

  Information about Service Pack 2 for Windows Vista and Windows Server 2008
  http://support.Microsoft.com/kb/948465

• Can I install vista full twice on the same computer as I have premium32 House on 1 partition and an ultimate defective on the other, then transfer defective files from scanning to good, with careful av?

  clean install of ultimate detail in a separate partition, already installed

  Due to persistent problems with cleaning of virus alureon back remains including taskscheduler, backup and restore, System Restore, I propose to installed ultimate RAID 0 volume 0 (currently occupied by the details of the home premium) and copy files for ultimate in raid 1 1 volume (probably take 3-4 weeks). Please see my profile and posts for info on how I managed to get into this mess. As the systems are stable at the time can someone think of something to prevent this or better idea, if ok will install, mse, av and spy, ad, malware progs 1 before so I can scan all files on the file transfer. At present I have swop systems via the bios hard drive boot priority and order, takes seconds.hope this sense

  Image copy defective everything first as a precaution.  Use Windows Easy Transfer to capture your files and settings.  Den of the bad copy or reinstall Ultimate.  Transfer your files and settings back with WET.  You can scan the file .mig (the WET file) with the reinstalled the new copy of ultimate AV program before starting the transfer.

  You cannot transfer your programs. They must be reinstalled. I don't see how using a second partition/installation ultimate solves anything. It would be a waste of disk space and a lot more work.

• Install Service Pack 4 on Windows XP Home Edition, need Adobe program to print various Government and the USPS form

  I tried many times to print a simple USPS shipping label today, I could download a USPS 88 page manual, but not the program to print the label or the label.  They say that if I use Windows XP Home Edition, I have Service Pack 4 or later.  I can't find any reference to Service Pack 4 on Microsoft help programs.
  Now I'm wondering if there is a solution about my fate.  Any advice will be appreciated. Thank you

  There is no service pack 4 for Windows XP.

  The program you want to talk, it's Adobe Reader? http://get.Adobe.com/reader/ TaurArian [MVP] 2005-2010 - Update Services

• Windows 7 Windows Update doesn't load after installation of Windows 7 Service Pack Beta, then Outlook 2010 (Outlook 2010 has attempted to change Microsoft Update, after 24 hours, I rebooted the computer) and now, Windows Update does not work.

  Windows 7 Professional 64 bit

  Windows 7 Service Pack (so that I don't get a bunch of file wrong mistakes of corruption when using svn)

  Outlook 2010 (it works but I had to restart Windows forcefully during the first round as she tried to change the update settings)

  Now I can not install XPMode and cannot run Windows Update.  There is no error, no errors in the log of events, loading just perpetually for initial load of XP Mode or Windows Update.

  How can I fix Windows Update?

  In this forum, you will find support for Win7 SP1 RC: http://social.technet.microsoft.com/Forums/en/w7itproSP/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Satellite A100-237: unknown device after installing Vista

  Hi all

  Just installed vista on my A100-237... After doing the upgrade of the BIOS and the installation of the "unknown device" Value Pack, with the location "on system compatible ACPI Microsoft" appeared in my device manager, any ideas on how to address this issue?

  Thanks in advance!

  Hello

  Could you please check if you can see the 'Batteries' entry under ' computer in Device Manager?
  As far as I know that the entrance of batteries should have a "Microsoft SMART Battery" & "Microsoft SMART Battery subsystem.

  If there is an unknown device, this might have something to do with Microsoft ACPI Compliant Embedded Controller.
  In this case it seems that you need a driver for MS SMART SMART Battery & MS battery subsystem.

  pleasae also check this thread;
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=14575

• I bought Windows 7, and in order to upgrade from Vista to 7 I need to install vista service pack 1, which i'm going to have done wrong. I have already searched the web and tried possible solutions, I found.

  When I try to install service pack 1 to automatic updates, it will download then during installation, it will get and 80 d error code. When I try to manually install the service pack 1 of online, I save the file to the desktop and run it as administrator and it will start to install, but after a few minutes, bad get the error code: 0x800F080D

  Hi smithj2768,

  Thanks for posting. Please try to install the service pack in a clean boot.

  Perform a clean boot on the inorder of the computer to ensure that all third-party software services are temporarily stopped, that may conflict with the installation of Vista SP2
  To perform a clean boot, follow these steps:

  1. Click Start, click Run, type msconfig then to open, and then press ENTER.
   
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.

  I hope this helps!

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Error: 0xc0000034 after installing Service Pack 1

  original title:! 0xc0000034! 144/47075 (_0000000000000000.cdf - ms): appear on the startup, after the release of Windows Vista Service Pack 1 to install Service Pack 2.

  Hi Sir / Madam

  I had a problem with my ACER ASPIRE 2930Z, yesterday I finished updating my WINDOWS Vista Service Pack 1 which requires me to download and install Service Pack 2 through WINDOWS UPDATE. Then after I downloaded folder said he asked to restart the computer due to then install some components after installing the windows could not start and appears on a black and white screen!: 0xc0000034! 144/47075 (_0000000000000000.cdf - ms)

  I tried several options such as the use of SYSTEM (F8) safe MODE, SYSTEM RESTORE, REPAIR, but these process seems does not. Can someone help me I need to access my file in my laptop as soon as possible. Thank you!

  Support FREE from Microsoft for SP2:

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You can try this:

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if required:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Re: Satellite U300: can I install Vista Ultimate?

  Hello.

  A few days back, I bought Satellite U300 series but it came with VISTA Home Premium that I don't want.

  Can I install WINDOWS VISTA ULTIMATE on my computer, if yes from where I can download the drivers.
  Is there a specific order I have to follow to install the drivers after installing VISTA ULTIMATE.

  Seniors need help here, please...

  Thank you and best regards
  Khurram Shahzad

  Of course, you can install Vista Ultimate on this laptop.
  All Vista drivers can be downloaded from the page of European driver of Toshiba.

  Ask for the specific installation order?
  Well, I'd start with the common drivers like Chip Set Utility, display driver, etc.
  In addition, I would recommend checking the option details, because there you might find driver and software details.

  By the way; the Intel Robson (SATA driver) package must be included in Vista because this driver is required for the recognition of the HARD drive.

• Windows install Service Pack 3

  A long time ago when I received the automatic update to Service Pack 3 and tried to install it, the update failed (Error 1706: file PRORET.) MSI not found).  I do not have the disk that he wanted me to insert to find the file and my attempts to find help on the web has as well.  Since then, when I open Excel, Windows Installer gets up and tries to install Service Pack 3.  If I wait until it I fail can then try again and succeed to open my spreadsheets but I have to wait for the Setup program to do its thing.  Is there anyway to prevent that from happening in the first place?  Dare just uninstall Windows Installer?

  Right click on desktop & select Properties: Windows version which is displayed on the general tab that results (for example, Windows Professional Service Pack 2)?

  See this discussion archived on PRORET. MSI and Office XP SP3, positions especially by Mr Laurent Genty: http://groups.google.com/group/microsoft.public.officeupdate/browse_frm/thread/599b499f5f4dba34

  You can download the "fullfile" of the Setup program for Office XP SP3 (i.e. OfficeXpSp3-kb832671-fullfile - enu.exe) for a manual installation here: http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=85af7bfd-6f69-4289-8bd1-eb966bcdfb5e

  You can get additional help for Office XP (for example, to get SP3 installed) in this forum: http://social.answers.microsoft.com/Forums/en-US/officeinstall/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows 7 on Vista Home premium! How to re install Vista on HP Pavilion

  A technician (technician at the shop) during writing a test version of windows 7 on my genuine Vista Home premium that come with the laptop HP Pavilion Dv6000.

  He did to recover my laptop a virus attached and there after I can't able to re instal Vista now on my laptop. What should do?

  I tried several versions and spend hundreds of Dollars may with these technicians.

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact HP and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You no longer have a Partiiton of recovery to reinstall Vista from which you installed Windows 7 above.

  Read this Information from HP:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

  Solve a common problem of recovery.
  If the original operating system is changed to a non - Vista OS, the Recovery Manager cannot be launched either office or by pressing f11 at startup. You can use the recovery disk to restore the computer to the original state of Vista. If you are using a non - Vista OS, you can use a third-party partition management program to recover hard disk space.
   
  See you soon.

• I installed Vista in a Virtualbox VM and the product key does not work, how to fix this? I use the same product key supplied with the computer originally.

  I bought a Dell Precision T3400 of Dell Financial Services and it came with Vista Business installed.  I installed a new hard drive and installed Vista in a Virtualbox VM by using the recovery disk that came with the computer, and the product key does not work for activation.  I get a message that says I need to activate Windows, but he says that the product key is not valid.  How can I fix it?

  Thank you

  If you have reinstalled the OEM of Vista Business copy on the new hard drive, as Bill says you can't also use it in a virtual machine.

  You can only reuse your OEM of Vista professional copy if it is no longer used on the computer. Do you have what operating system installed on the new hard drive? It was an upgrade copy or complete the license?

  If you used a license to upgrade to another edition of Windows to replace your copy of company then Vista Business license is still in use (for upgrade) and you cannot reuse it in your virtual machine.

  However if you replaced Vista business with a copy of the full license of another edition then you are able to use the OEM copy in a virtual machine, but only on the same computer. You must use the product key from COA to the label on the computer. The product key is put in the copy OEM cannot find the SLIC table on the host motherboard. You must use the phone activation from within the virtual machine. Click on start in Vista Business and typing "slui 4. Do not meet the audio guests until it asks you if you want to speak to an agent. Explain that you have completely replaced the OEM copy with a copy of the full license of the new windows and now want to use the OEM copy in a virtual machine on the same computer. Agent will then give you the activation string. Remember that the virtual machine is not transferable to any other computer.

  This information is offered by Darin Smith (MSFT) and the team of Windows licenses, November 18, 2011.

• get the engine deployment error while installing Vista Ultimate 32-bit

  When I try to load vista ultimate I get an error message; Windows game could not reset the deployment engine. To install windows restart installation. then I start again with the same results. Vista can't handle new computers? This is a new computer without an operating system.

  Hello

  1. how you try to install Vista? You install using Setup disc or try to re the image?

  Please check the compatibility of your drive with Vista:

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/search.aspx?type=hardware&s=Seagate%20barracuda%201.5%20TB

  You can use third party software to do a low-level format of the disk, and then try to install Vista once more.

  Important: Microsoft offers no assurance or warranty, implied or otherwise and is not responsible for the download you receive from the sites of third parties or support related to the download or the downloaded technology. If you need assistance dealing with third party technology, please contact directly the manufacturer.

   

  If this does not work please get another Vista Installer DVD to install it.

• Cannot install language pack in windows 2008 R2

  Hi all

  When I tried to install language pack windows I get home screen even after a wait of more than 10 hours.

  suggest

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum