Problem installing Vista Pack 2

Similar Questions

• Installed Vista pack 1 as prompted. Tour is continuing after 10 hours. Monitor says no entries, and falls asleep.

  original title: installed Vista pack 1 as prompted.  Tour is continuing after 10 hours.  Monitor says no entries, and falls asleep.  What should I do?

  My desktop computer has said that there was a problem with the window.  He said that Vista pack 1 expired July 12.  I installed it when prompted by August 6.  He began to run at 18:30 and HP Tower ran all night with a blue and orange light flashing.  The monitor was gone to sleep.  When I turned on the screen this morning, he said that he had no entry and time to sleep.  What should I do next?    I just got internet on 28 June, so don't know what that what is happening.  I get updates automatically.  Why it that not update.  I use another computer to communicate with you because I don't know what to do next.

  Spent by the factory with the OS. After 18 + OVERLAYS on my XP Pro PC I've exchanged on this VISTA Premium 32 bit and after 15 + OVERLAYS on this one, IT WORKS finally.

  This experience as Kosh Vorlon said above RESTORATION anyway possible and go directly to Microsoft for Service Pack so I found this to be the best source

  It's the 32-bit version

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=30

  This is the 64-bit version

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=21299

  Now it's been GETTING all THE UPDATES... I found that the PC knows what to do with them, and without any help from us that it just boot process follow all prompts.

  When it's done GET SERVICE PACK 2, SP2 from Microsoft

  It's the 32-bit version

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=17669

  It is for the 64-bit version

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=17669

  and it goes the same for this time to GET all UPDATES.

  And a my Service Packs note came in the updates of Windows. As well as all updates from the update updates. HP updates are usually for the hardware and drivers.

  Good luck

  RickS

• Vista Home basic - problem installing service pack

  My updates are horribly outdated and I try to install service pack 1 on Vista Home basic and receive an error - 0 x 80073712.  I tried microsoft tech people advised but are unable to install.  Can someone help me?

  Hello

  This problem may occur if one of the following conditions is true:

  • A program on your computer interfered with the installation of the service pack.
  • There is an inconsistency in the store of Windows services. The store Windows maintenance is a required component to install service packs.

  I suggest you try the steps from the following link:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  Keep us updated on the status of the issue.

• Having problems installing Vista Service Pack 1, says that it is installed but not shown in the installed updates

  Problem of re - install windows service pack 1 KB936330.

  I had to format the hard drive and reload the operating system.  Windows stopped to Service Pack 1.

  I have a Windows Update if it is available for updates.

  When I click on it, updating starts, then gives me the window on the acceptance of the agreement, then a window that could take up to an hour and will restart so save the job.  When I click the grateful this last window, the update screen comes back and says that it has been installed.

  But I can not find the Service Pack 1 or KB936330 on the list of updates installed on Control Panel / programs and features / installed updates window.

  Help.  I can't update to IE 7 because the Service Pack 1 and Service Pack 2 are not installed on my system.

  Thank you

  Mike

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

  Both articles contain instructions on how to manually install service packs.

• Problem installing Vista SP1

  I am running Vista Ultimate on a Dell Inspiron 600 m and despite many attempts and research, that I still can not to get SP1 is installed.  I tried to use Windows Update and the standalone package and neither one worked.  It is said that an internal error has occurred.  I also tried to disable the drivers that may cause problems with the installation such as those for the adapter and network card.  But in vain.  I've been running Vista on this computer for over a year without SP1. I don't know if it has nothing to do with my computer being relatively old, and it's an incompatibility problem or what.  But I'm running out of things to try.

  TECHNICAL DATA:

  1 GB OF RAM
  1.40 GHz processor
  32-bit operating system

  If you need to know anything else, I'll be happy to look it up!

  Hey Jac9857,

  Welcome to the Microsoft Answers Forum!

  This problem can occur for the following reasons:

  a. a program on your computer interfered with the installation of the service pack.

  b. There is an inconsistency in the store of Windows services. Maintenance store Windows is a required component to install service packs

  Access the link below and follow the steps mentioned in the article which may help you to solve the problem:

  http://support.Microsoft.com/kb/947366

  Let us know if this information helps you.

  Kind regards

  Manasa P-Microsoft Support.

• Problem installing Service Pack 1

  Hello I recently restored my computer to System. I was installing all the updates for my system to speed, however when I downloaded and installed Service pack 1, it tells me it has installed, but doesn't show that there in the installed updates section. And when I try to download Service Pack 2, he said that I should install Service Pack 1... I have about 5 times. I'm stuck with what to do so that my computer is not running very good with some programs

  Hi Chris,

  Thanks for choosing Microsoft Community!

  You have reached the right forum. Let us work as a team and try to solve this problem.

  If I understand correctly, you have problems with Windows Vista Service Pack 1.

  Let us see the following and see if they help you:

  Method 1: You can read the following article.

  How to fix the Windows Vista and Windows Server 2008 service pack installation issues:

  http://support.Microsoft.com/kb/947366

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: You can also check the following items:

  Learn how to install Windows Vista Service Pack 1 (SP1)

  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

  What you need to know before you install Service Pack 1 KB936330

  http://support.Microsoft.com/?kbid=936330

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

• Problems installing vista on a new hard drive

  I just finished installing vista on a new hard drive, and now the computer is unable to find internet connections. any suggestion would be great!

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• Problem installing Vista Service Pack 1

  Hello

  I searched the internet for hours now and have found many people with the same problem but I couldn't find a solution.

  I just bought software that requires Vista service pack 1 which I thought that I had already but I didn't so I installed it.
  It goes through the whole process of installation and the last section after restarting, it goes to a black screen where it moves well as files or something but locks files 37898/94821 with the message:! 0xc01a001d! (\Registry\Machine\COMPONENETS\winners\x86...).

  If anyone has had this problem and know what to do.
  My laptop is fine without service pack 1, but my new software needs to work so I have to download it.

  Thank you

  Hello

  To be honest, I never had any problem with my Vista updates
  The Vista updates automatically every time when I m online and when new updates are available

  How have you tried to update the Vista operating system?
  Have you downloaded the SP1 version first on the HARD drive or do you run an automatic update?

  If the automatic update does not work, try to download the SP1 version first, and then start the update procedure:

  SP1 can be downloaded here:
  http://www.Microsoft.com/Windows/downloads/default.aspx

• problem installing vista Home premium service pack 2

  I recently had a hardware crash, had to reinstall the operating system, i.e. Windows vista Home premium with service pack 1 (32-bit) who came wth the system. Later, I tried to update the operating system, but the thrown error was 'WindowsUpdate_80080005 '. I tried to download vista sp2 on microsoft site, and when I tried to install it, it threw an error mentioning as casastrophic error E_unexpected(0*8000ffff). How can I update my windows vista Home premium with Service Pack 2?

  I tried the options listed below
  • tried to update via windows update, it threw an error "WindowsUpdate_80080005."
  • tried to install it by downloading the sp2, it threw an error E_unexpected(0*8000ffff)

  Please answer

  BR
  David

  Hi, DavidDarse,

  0 x 80080005 indicates that there is a problem of access denied with the Background Intelligent Transfer Service (BITS) security descriptors.

  1. don't you make changes on the computer before the show?
  2. When you receive this error message?
  3 update you trying to do?

  Method 1: Run that fix the following:

  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2:
  If the problem persists, then try to set up your computer in a clean boot state and then try to install the update to windows.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.

  Download the file and save it to your desktop

  Close all windows and applications

  Right-click on the file and select run as administrator to run the installation process.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  WARNING: Microsoft does not recommend interrupting the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. For security, you can back up your data before using check disk drive.

  Have you tried a system restore before the second error?

  http://support.Microsoft.com/kb/2732500

  FixIt MS: 0x80000FFFF error Code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/946414

• Problem installing Vista Service Pack 2

  Hello, I keep trying to install the Vista SP2 and it keeps telling me that an item is found.

  I have Error:ERROR_NOT_FOUND(0x80070490)

  It's confusing to me. I tried the download of the previous service pack that says that I already have.
  I tried to restart the computer before turning off all firewalls
  I tried the download of the installer a ready source.

  I am really frustrated

  Can anyone help?

  Iain

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  A repair install is the usual solution of SFC/scannow does not work.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 for Vista
  http://support.Microsoft.com/kb/948537

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed.

  Uninstall SP1

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  TaurArian [MVP] 2005-2010 - Update Services

• Problems installing Vista SP2

  OK, since the release of SP2 ive tried to install the Windows Vista Edition SP2 Home Premium x 86.

  Ive tried: [all this unsuccessfully]:

  -Installation in safe mode

  -Installation after removing my anti virus program.

  -Installation after you change ownership of all the contents of the C: drive to my account.

  -Install the standalone version, all languages

  -Install the standalone version, 5 languages

  - And things more...

  Some notes on my system important:

  -Its a preinstalled Windows Vista Home Premium [do not know if it came with SP1] install on my laptop: Acer Aspire 7730 G-644G100MN.

  -As it was an English version of Windows Vista, when I arrived [which is weird, because I live in the Netherlands] I changed the language in Dutch using Vistalizator, the only program out there that allows you to change the language of your windows installation.

  -Windows Vista installs each update without any problems except for the SP2... I get the error message is: 0x800F0823

  -Some time ago I discovered something very strange in my laptop: the owner of the contents of the C: drive has not been saved to the Group administrators, but something else [he could not find the owner, something like that]. So I changed the property to my account [which caused some viruses to wake up, somewhat, but those that have been cleaned in place], which enabled me to access my program of all the files in the folders [which I couldn't do before, and that was the main reason I changed ownership: I was not able to run or install programs] really weird stuff]

  However today still sometimes the change of property to the non-administrateurs, which is really weird... And annoying, for example, yesterday I installed the game blur, but I wasn't able to run it because I was not allowed access to the game files, even if im an administrator!

  So I changed the owners once again, and then everything worked fine.

  -In addition, before I changed the property, I did a sfc/scannow, who found errors, but has not been able to correct.

  I guess that's about it.

  Please help me solve this problem!

  Kalaar,
  What you can try to do is to uninstall the pack of Vistalizator program\language.  Then run SFC again and if it can solve the problems, then try to reinstall SP2.  If SFC finds problems and can't always fix them after the Elimination of this program, then you need to reinstall Windows.  You can perform upgrade inplace or a clean install, and all updates, including SP2.  Thislink gives information on performing an inplace upgrade.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Resolution of the problems installing Vista SP2

  I was wondering if someone who has known Vista SP2 installation problems, involving to reach step 3 100%, then receive an error message and reverting changes, discovered or received a definitive solution?

  Matty J L,.

  Please read: information about Service Pack 2 for Windows Vista and Windows Server 2008
  See "installation tips" and "Microsoft support"

  "How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues":
  http://support.Microsoft.com/kb/947366

  "Service pack Windows Vista and Windows Server 2008 install fails with error 0x80004005":
  http://support.Microsoft.com/kb/971204

  "Error message when you try to install Windows Vista Service Pack 2 or Windows Server 2008 Service Pack 2:"an internal error occurred while installing the service pack ":
  http://support.Microsoft.com/kb/967818

  Hope this helps, Vincenzo Di Russo - Microsoft MVP Windows Internet Explorer, Windows Desktop experience & Security - since 2003. ~ ~ ~ My MVP profile: https://mvp.support.microsoft.com/profile/Vincenzo

• key Vista cd error! problem installing Vista sp 1.

  (1) I got an error message saying that my product purchase cd key is already in use. I have to buy another key, enter a new key, or use the automated phone system. Free number listed is not a free call and turned out to be too expensive. Howe else can I SOLVE this PROBLEM?

  (2) windows update says sp 1 update is successful but I get it like the update available only important non-critical security updates optional. Is someone can you please help me solve these problems?

  Hi Arthur,.

  1. Since when you get the error message?

  2. you have any security program installed on the computer?

  3 did you a recent software or changes to the material on the computer?

  To work with the product key number, I suggest you go through the Microsoft Help article and check.

  How to contact a Microsoft Product Activation Center by phone

  http://support.Microsoft.com/kb/950929

  To work with the issue of the update of Windows, you can follow the steps from the link and check. Run the automated Fixit and check. If this does not help, you can follow the manual procedure.

  Note: there is a risk of data loss if all the files are infected and which can be removed in the cleaning process.

  You can also follow the steps from the link provided and check.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  Hope this helps and let us know if you need more assistance. We will be happy to help.

• Problem installing Vista SP2 FastCGI

  I'm trying to install php using FastCGI. When I go to the mappings Manager-> Add Module Mapping, in the dropdown Module I don't see FastCGIModule.

  From what I've read FastCGI is part of Vista SP1. I found the answer to my problem here:http://www.witsuite.com/support/knowledge-base/manual-installation/install-iis-fastcgi.php#enable-iis-fastcgi-module-on-windows-vista the point here is the answer to my problem:

  Enable the IIS CGI feature

  Service Pack 1 of Microsoft Windows does not automatically activate for already installed IIS FastCGI module. To activate it, deactivate CGI and then turn it back on.

  I had to reboot my system and made the mistake of turning on CGI before applying any updates.

• Problems installing VISTA updates

  Recently, whenever my PC downloads updates for VISTA, it fails to shut down properly, just says it's installing updates - that is never finished. On reboot, the computer allows me to connect and instructs the bureau, but crashes after about two minutes, no matter what program I use.

  Hi Sallybettymary,

  1. you receive messages or error codes?

  Method 1:

  Step 1:

  You can check the status in safe mode.

  Start your computer in safe mode

  Step 2:

  If you are able to boot into safe mode without any problem, you can try to perform a clean boot and check.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Method 2:

  Step 1:

  You can also check in the history of update to see if updates failed to install.

  a. open Windows Update by clicking the Start button, all programs and then click Windows Update.

  (b) in the left pane, click view update history.

  c. to display more information about an update, double-click it and check for errors.

  See the Windows updates are installed

  Step 2:

  If impossible to install updates, then you can try to download the stand-alone package of failure update from the Microsoft Download Center and see if it helps.

  Hope this information is useful.