Installer Build errors NI_MDF.lvlib:MDFCommon_Open.vi

Similar Questions

• Build error cannot find the distribution under construction

  I had a similar problem like this thread.

  http://forums.NI.com/T5/LabVIEW/build-error-can-t-find-distribution-being-built/TD-p/1462842/page/2

  My old guard Installer and ask for copy of the installation is finish. Quite annoying because it takes so long to get there. Any advice would be appreciated. I've attached a screenshot of my error message.

  You created this problem by running a build already install on your development computer. If you are distributing drivers with your installer you should NEVER run the installation program on the machine on which you build.

  Here's what happens:

  All software shops NOR where it was installed since in the Windows registry. When you initially installed it note where you install (DVD, network drive, etc.).

  When you build an installer in TestStand will prompt for this location if it cannot find the original installation files (that is, if you take the DVD from the drive disconnected from the PC from the network, etc.)

  What happened on this PC is you have to build a Setup program, and then you run this installer on the PC, and because the pilots were already present it replaced the path stored in the registry with the path where your Installer (e.g.) was C:\Temp\long path)

  I'm guessing that you have now deleted this former Installer. That means that you have to re - run installers for ALL the software to, OR that you have installed on this machine so the registry is updated to point to the path of DVD or the network path.

• Upgrade 'Stacked vs. Non-Stack Build' error-

  During the upgrade from Vista to Win7, I am stopped by an "stacked vs. non-Stack build" Error Message... which means this message - means and how to successfully upgrade to Win7?

  For all questions, installation of Windows 7, the Windows 7 Forums are the best place to ask, as they came across these errors before:

  http://social.answers.Microsoft.com/forums/en-us/w7install/threads

  "Download Windows 7 installed and activated on your PC."

  They will help you in the Windows 7 Forum at the above address.

  See you soon. Mick Murphy - Microsoft partner

• Ant with WebLogic 10.3 build error

  Hello
  
  I'm trying to compile the web service example in the tutorial
  
  http://download.Oracle.com/docs/CD/E12840_01/WLS/docs103/webserv/use_cases.html#wp228687
  
  Use case # 1
  
  And I get this error when you try the command "> ant-build service:
  >
  D:\myExamples\hello_world\src > ant build_service
  BuildFile: D:\myExamples\hello_world\src\build.xml
  
  BUILD FAILED
  D:\myExamples\hello_world\src\build.XML:4: taskdef class weblogic.wsee.tools.anttasks.JwscTask is not found
  by using the [AntClassLoader] class loader
  
  Total time: 0 seconds
  
  
  At this point in the tutorial, the build.xml file contains:
  >
  < name of project = 'webservices-hello_world"default ="all">
  
  < taskdef = "jwsc" name
  ClassName = "WebLogic.WSEE.Tools.anttasks.JwscTask" / > "
  
  < name target = "build-service" >
  
  < jwsc
  srcdir = "src".
  DESTDIR = "production/helloWorldEar" >
  
  "< file="examples/webservices/hello_world/HelloWorldImpK.java TJ.
  Type = "JAXWS" / >
  
  < / jwsc >
  
  < / target >
  < / project >
  
  
  I wonder if I need to set a variable in the environment?
  
  I know that my Ant installation is good since I managed to compile and run a java program with a manifesto in the jar.
  
  Thanks a lot for your help.

  chk this
  Re: build errors using Ant

  1. If you are working from the user_projects directory, add the following to the Properties section of the generation xml "". "" Other wise, set the value the full path of the directory on the server wlserver_10.3 lib directory.

  2. in each taskdef element, add the following child element
  
  
  
  
  
  
  
  
  3. Save and run the ant task in your project directory.

• Build error when you create the Provisioning package picture

  Hi all

  I'm trying to create a master Windows IOT image by using the tool of IDC (imaging and designer of Configuration).

  I created a package of commissioning and using"customization of the Windows Image" to create a kernel ITO image by specifying the configuration previously created package but still get a build error.

  It looks like a fairly simple process, but repeatedly gives the error below. Also, I have not all USB devices connected to the computer, nor are there insufficient memory problems.

  ERROR

  =====

  Progress of the staging: 75%
  Staging failed to: 75% complete
  UpdateDLL: Measurement of results:
  Staging of total time: seconds = 27 (tickcount = 27235)
  Error: imagery! UpdateImage: Failed call to UpdateDLL::PrepareUpdate with the error code:-2145877241 (0 x 80188307)
  DismountVirtualHardDiskByFileName: disassembly image C:\Users\Shridhar\AppData\Local\Temp\8eceab63e9b746c0a9c65848679d56eb.vhd
  DismountFullFlashImage: [0.219] cleanup of temporary access roads.
  CleanupTemporaryPaths: Cleaning of temporary path C:\Users\Shridhar\AppData\Local\Temp\IMG39F3.tmp\.
  Storage service: disassembly of the image in 0.2 seconds.
  Imaging: See Flash.cbs.log and Flash.csi.log for more details.
  Imaging: Performance results:
  Total running time: 00:00:52.7198674
  Time of image creation: 00:00:00.0642425
  Writing FFU Time: 00:00:00
  Battery storage time: 00:00:17.8667874

  Any help would be greatly appreciated.

  Hello

  Your question is beyond the scope of this community...

  Repost in the TechNet Forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  Or MSDN Forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.

• Y at - it an easy way to have a version number that the code VI has access to, and which is used as the version number for the executable file and the installer builds?

  Y at - it an easy way to have a version number that the code VI has access to, and which is used as the version number for the executable file and the installer builds? Now whenever I update my software I need to change the global variable where I store the version number, and then when I build I have in hand, open the properties and change the version number for the executable file and the installer. Is there an easy way to make these as all corresponding automatically?

  Have you tried a search? This question comes up a LOT. Here are the results of a search: http://forums.ni.com/t5/forums/searchpage/tab/message?location=Node%3A170&q=application+version#mess...

• Vista SP2 Installation fails (error 800706BE Code) via Windows Update

  I am running Windows Vista Business (32-bit) SP1 and I noticed that Vista SP2 is available for download by manually checking in Windows Update last night.  After having seen that it is a large download (more), I started the download, left my PC and left the House.  When I got home, my screensaver was away and when I attamped my password to disable the screen saver and see where I was in the process of updating, my password did not work.  Then I did a hard reboot but then could not connect under my admin user account.  I've then logged in as my wife (standard user - no password) and went to Windows Update where I noticed that the SP2 for Vista Installation fails (error 800706BE Code).  I spent most of last night and all today so far tried to solve this problem.  There are several problems here... When I click on "Install" in Windows Update, I get a message of "is not necessary: 1 update" (even when I look in the installed updates it says that the update failed).  If it is not necessary, then why is it listed as an important update that must be installed?  Endless loop... In addition, I'm not a password reset for my connection because I have a password saved on a flash drive.  Then I tried using all the older passwords that I remembered and none worked.  Shift caps lock was not on either.  I've logged in as my wife, went to the Microsoft Download page and eventually find the link to download the standalone version of SP2 Vsita, but after downloading the massive file, I didn't have the right to install it because I can not connect as an adminstator!

  (sigh) Can someone please help with this?  Thank you

  Naveen,

  Thank you very much for your suggestions!  Your suggestion of restarting, press F8 and choose "repair your computer" worked.  I was able to do a system restore and I chose a date where my old password was still in use (I had just been invited to change a few days before I tried to download Vista SP2).  In addition to losing my cookies and automatically complete IE8 - everything is back to normal.  I have not yet tried a 2nd try to SP2, and I'm very hesitant to do it now!

  Thank you once again!

• Update for microsoft security essetials KB2804527 (4.2.223.1) installation failure error code: 0x8004FF83 all other updates installed OK

  Update for Microsoft Security Essetials KB2804527 (4.2.223.1) Installation failure error Code: 0x8004FF83 all other updates installed OK.

  What version of Microsoft Security Essentials you run?

  What operating system and service pack?

  Prior security software?

  No matter what security software installed again?

  Please read the following:

  A possible reason for this problem is that you have installed entirely or partially on the PC security software conflict. Remove all other computer security software.

  You may need to use a cleaning tool to remove your prior security software:

  http://answers.Microsoft.com/en-us/protect/Forum/protect_start/list-of-anti-malware-program-cleanupuninstall/407bf6da-C05D-4546-8788-0aa4c25a1f91

  The current time and the date now in Ohio, the United States is

  07:28

  Wednesday, February 27, 2013
  UTC - 0500 (EST) Eastern Standard time

  UTC/GMT is 12:28 on Wednesday, February 27, 2013

  Current weather conditions in Columbus

  Cloudy4 ° C / 40 ° F

• WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D,.

  IM TRYING to re - INSTALL WINDOWS VISTA ON MY T-6321 to the front door, BUT WHEN I INSERT THE DISC, AND INSTALL, a MESSAGE APPEARS SAYING: WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D, SHOULD ALL BE ON THE DISCALREADY?

  Hi JRCLNSIN100,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         What is the disk you use to reinstall?

  ·         Is this a recovery or reinstalling the disc you are using?

  ·         When exactly do you get this error message?

  ·         What is the edition of Windows Vista, you try to install?

  ·         How old is the drive that you are using?

  ·         How are you starting the installation process?

  After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.

  First check if you have scratches or dust on the disc and clean the surface and try again.

  To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.

  To perform a flat installation of Windows Vista, follow these steps.

  Note The hard disk must have at least 3 GB of free space on the disk for the Windows Vista installation files. The hard disk must have at least 15 GB of additional disk space to install Windows Vista. For more information about system requirements for Windows Vista, see the Microsoft Web site at the following address:

  http://www.Microsoft.com/Windows/products/windowsvista/editions/SystemRequirements.mspx

  1. Insert the Windows Vista installation disc.
  2. Start Windows Explorer.
  3. In Windows Explorer, click to select the drive for the Windows Vista installation disc.
  4. On the Edit menu, click select all.
  5. On the Edit menu, click copy.
  6. Click to select the hard disk you want to contain the flat installation files.
  7. On the file menu, point to new, click the folder, type Windows Vista Setupand then press ENTER.
  8. Double-click the Windows Vista Setup program, and then click Paste on the Edit menu.
  9. Double-click Setup.exe, and then follow the instructions that appear.

  See the link below for more information on flat installation.

  How to perform a flat installation of Windows Vista

  http://support.Microsoft.com/kb/928902

  This problem can also occur if the firmware of the DVD drive is defective or obsolete.

  If the step above does not resolve the question suggests that you install the latest drivers for the DVD player on the computer.

  For more information please visit the link below.

  Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".

  http://support.Microsoft.com/kb/930984

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Security Essentials installation failed, error Code: 0 x 80070643

  Security Essentials installation failed, error Code: 0 x 80070643

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/msestart/threads

  Installing and upgrading Microsoft Security Essentials program.

  They will help you in the Forum above.

  See you soon.

  Mick Murphy - Microsoft partner

• build error of createUser using the c# code sample

  I get the following build error when you use the c# code for the createUser use method example.

  I use VisualStudio2008 and the Blackberry_Admin_API - 5.0 - US.pdf c# code example.

  Build error States:

  Cannot implicitly convert type 'BESAdmin.BASemailExchangeWebService.EnableBlackBerryUserAttributesType' in 'BESAdmin.BASCoreWebService.EnableBlackBerryUserAttributesType' C:\VS2008\BESAdmin\BESAdmin\Form1.cs 76 488 BESAdmin

  The build error is on this part of the code:

  for (int j = 0; j)< attributes.enableblackberryuserattributes.length;="">

  {

  userEnableBBAttributes.enableBlackBerryUserAttributes [j] = attributes.enableBlackBerryUserAttributes [j];

  }

  Everyone has this same problem and found the solution?  It seems that there is something missing or incorrect in the sample code around type conversion between the EnableBlackberryAttributesType.

  Thank you, Ed

  Hi Ed,

  I tried throwing the code example in a project already created the mine and has not known this error at compile. The two types of objects must be the same, so I don't know why there is no conflict with assignment.

  Please try to use the sample code to create a user from the BAA API reference documents:

  http://www.BlackBerry.com/developers/docs/BAA/5.0.0/

  Or the Knowledge Base of the developer section:

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/1608023/How_To_-_Get _...

  It can also be a good idea to recreate your proxy to do this.

  Let us know if the problem is still evident with the examples above.

• The Windows 7 Installation failed, error code: 0 x 80070017

  I own a legal copy of DVD of Windows 7 64-bit. I'm trying to reinstall it on my computer, which, for the time being, has no operating system installed, but 13% of expanding windows files, I always get the following error message:

  Windows cannot install required files. The file may be corrupted or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0 x 80070017

  What is the problem, how can I fix it? Is my Windows 7 disc damaged?

  If you have downloaded Windows 7 and it burned a DVD test burn again at the slowest speed possible. It is also possible the download may have errors, you can try to download it again.

  If you have several hard drives remove all except the one that you install Windows 7, and then replace it after Windows 7 is installed.

  Disconnect all external devices except the keyboard and mouse before installing.

  If using a video card and the computer has integrated video use and remove the video card.

  Unplug the computer from the internet, if you have wireless disable.

  RAM (memory) - reduce the amount of RAM. 1 GB if 32-bit installation, 2 GB for 64-bit, then replace RAM if the upgrade was successful. If you added new RAM make sure it is also compatible.

  Windows 7 installation disc does not

  Just a few troubleshooting steps to see if the drive is bad or if the DVD player is bad:

  If you have another DVD player available try to use this drive in your computer instead.

  If you have another computer available, try the disc of Windows 7 by using this computer and see if it can read the disc, or if the disc cannot be read and is bad.

  In addition, if you purchased the retail version of Windows 7 try to put in the other disk of type bit of the Windows 7 disc and see if it works properly.

  If you cannot start Windows 7 installation disc, your computer can boot from other bootable disks?

  How to replace Microsoft software

  http://support.Microsoft.com/default.aspx/KB/326246

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• chronic build error

  Since today, I get a build error in all of my projects:

  Error occurred during the build.

  Errors under builder "App descriptor Validator" of the project "MNKit".

  java.lang.NullPointerException

  Google gives no guidance on this. Restarting Momentics, or clean up projects does not help.

  At the opening of bar - descriptor.xml, I get:

  java.lang.NullPointerException
  to com.qnx.tools.bbt.core.signing.BarSignerTool. (BarSignerTool.java:105)
  to com.qnx.tools.ide.bbt.internal.core.BBTNativeSDKProvider$ BBTNativeSDKDescriptor.getBarSigner (BBTNativeSDKProvider.java:172)
  at com.qnx.tools.bbt.core.sdk.AbstractBlackBerryTabletSDKDescriptor.getValidator(AbstractBlackBerryTabletSDKDescriptor.java:122)
  at com.qnx.tools.ide.bbt.internal.core.BBTNativeSDKProvider.getValidSDKs(BBTNativeSDKProvider.java:97)
  to com.qnx.tools.bbt.core.sdk.IBlackBerryTabletSDKDescriptor$ IRegistry$ Impl.collectValidSDKs (IBlackBerryTabletSDKDescriptor.java:327)
  to com.qnx.tools.bbt.core.sdk.IBlackBerryTabletSDKDescriptor$ IRegistry$ Impl.getValidSDKs (IBlackBerryTabletSDKDescriptor.java:311)
  at com.qnx.tools.bbt.internal.core.utils.BlackberryTabletSDKUtils.getAvailableTargetPlatformVersions(BlackberryTabletSDKUtils.java:130)
  at com.qnx.tools.bbt.xml.internal.ui.editor.bbtxml.forms.GeneralAdvancedPart.getAvailablePlatformVersions(GeneralAdvancedPart.java:146)
  to com.qnx.tools.bbt.xml.internal.ui.editor.bbtxml.forms.GeneralAdvancedPart. (GeneralAdvancedPart.java:69)
  at com.qnx.tools.bbt.xml.internal.ui.editor.bbtxml.forms.GeneralPage.createLeftContent(GeneralPage.java:65)
  at com.qnx.tools.bbt.xml.internal.ui.editor.bbtxml.forms.GeneralPage.createFormContent(GeneralPage.java:54)
  at com.qnx.tools.bbt.xml.internal.ui.editor.bbtxml.forms.BBTFormPage.createFormContent(BBTFormPage.java:92)
  to org.eclipse.ui.forms.editor.FormPage$ 1.run(FormPage.java:152)
  at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70)
  at org.eclipse.ui.forms.editor.FormPage.createPartControl(FormPage.java:150)
  at org.eclipse.ui.part.MultiPageEditorPart.addPage(MultiPageEditorPart.java:241)
  at org.eclipse.ui.forms.editor.FormEditor.addPage(FormEditor.java:325)
  at org.eclipse.ui.part.MultiPageEditorPart.addPage(MultiPageEditorPart.java:211)
  at org.eclipse.ui.forms.editor.FormEditor.addPage(FormEditor.java:308)
  at com.qnx.tools.bbt.xml.internal.ui.editor.bbtxml.BBTXMLEditor.addBBTPage(BBTXMLEditor.java:233)
  at com.qnx.tools.bbt.xml.internal.ui.editor.bbtxml.BBTXMLEditor.createGeneralPage(BBTXMLEditor.java:240)
  at com.qnx.tools.bbt.xml.internal.ui.editor.bbtxml.BBTXMLEditor.addPages(BBTXMLEditor.java:324)
  at org.eclipse.ui.forms.editor.FormEditor.createPages(FormEditor.java:138)
  at org.eclipse.ui.part.MultiPageEditorPart.createPartControl(MultiPageEditorPart.java:348)
  at org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:670)
  at org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:465)
  at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:595)
  at org.eclipse.ui.internal.EditorReference.getEditor(EditorReference.java:289)
  at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditorBatched(WorkbenchPage.java:2945)
  at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditor(WorkbenchPage.java:2850)
  to org.eclipse.ui.internal.WorkbenchPage.access$ 11 (WorkbenchPage.java:2842)
  to org.eclipse.ui.internal.WorkbenchPage$ 10.run(WorkbenchPage.java:2793)
  at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70)
  at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2789)
  at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2773)
  at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2764)
  at org.eclipse.ui.ide.IDE.openEditor(IDE.java:651)
  at org.eclipse.ui.ide.IDE.openEditor(IDE.java:610)
  at org.eclipse.ui.actions.OpenFileAction.openFile(OpenFileAction.java:99)
  at org.eclipse.ui.actions.OpenSystemEditorAction.run(OpenSystemEditorAction.java:99)
  at org.eclipse.ui.actions.RetargetAction.run(RetargetAction.java:221)
  to org.eclipse.ui.navigator.CommonNavigatorManager$ 3.open(CommonNavigatorManager.java:185)
  to org.eclipse.ui.OpenAndLinkWithEditorHelper$ InternalListener.open (OpenAndLinkWithEditorHelper.java:48)
  to org.eclipse.jface.viewers.StructuredViewer$ 2.run(StructuredViewer.java:866)
  at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42)
  to org.eclipse.ui.internal.JFaceUtil$ 1.run(JFaceUtil.java:49)
  at org.eclipse.jface.util.SafeRunnable.run(SafeRunnable.java:175)
  at org.eclipse.jface.viewers.StructuredViewer.fireOpen(StructuredViewer.java:864)
  at org.eclipse.jface.viewers.StructuredViewer.handleOpen(StructuredViewer.java:1152)
  at org.eclipse.ui.navigator.CommonViewer.handleOpen(CommonViewer.java:462)
  to org.eclipse.jface.viewers.StructuredViewer$ 6.handleOpen(StructuredViewer.java:1256)
  at org.eclipse.jface.util.OpenStrategy.fireOpenEvent(OpenStrategy.java:275)
  to org.eclipse.jface.util.OpenStrategy.access$ 2 (OpenStrategy.java:269)
  to org.eclipse.jface.util.OpenStrategy$ 1.handleEvent(OpenStrategy.java:309)
  at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
  at org.eclipse.swt.widgets.Display.sendEvent(Display.java:4128)
  at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1457)
  at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1480)
  at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1465)
  at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:1270)
  at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3974)
  at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3613)
  at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2701)
  at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2665)
  to org.eclipse.ui.internal.Workbench.access$ 4 (Workbench.java:2499)
  to org.eclipse.ui.internal.Workbench$ 7.run(Workbench.java:679)
  at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
  at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:668)
  at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
  at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:123)
  at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
  at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
  at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
  at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:344)
  at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:622)
  at org.eclipse.equinox.launcher.Main.basicRun(Main.java:577)
  at org.eclipse.equinox.launcher.Main.run(Main.java:1410)

  I am running on a Mac with the new Oracle Java 1.6.0.37 Mountain Lion.

  solved.

  Re-install Momentics and the simutaor is done.

• Build error on request requestExit

  I encountered a strange problem to call the requestExit API. Compiles normal but generation has an error.

  undefined reference to the symbol "_ZN2bb11Application11requestExitEv".

  Note: '_ZN2bb11Application11requestExitEv' is defined in DSO C:/bbndk/target_10_0_9_2318/qnx6/armle-v7/usr/lib/libbb.so.1 try so add to the linker command line

  could not read symbols: invalid operation

  My source code is as below

  Cpp:
  
  MyApplication::MyApplication(bb::cascades::Application *app)
  : app(app)
  
  app->requestExit(); //Application::instance()->requestExit(); build error also
  
  bar-descriptor.xml
  
  
  .pro
  LIBS += -lbbsystem -lbbnetwork -lbbplatform -lscreen -lbbdata -lbbdevice
  

  Which library else I would add to my project?  Thanks for letting me out.

  Hello

  libbb.so East - lbb

• Skype installation failed, error code 1601

  a new Tower, I bought a couple months ago and im trying to install Skype on it, it downloads and past by installing, but at the end of the installation, an error box appears that says

  Skype installation failed; code 1601
  The Windows Installer service could not be accessed. Contact your support staff to check the service Windows Installer is correctly recorded.
  Can someone help me with this? I have no idea what that means or how to fix it.

  Hi young sj,.

  Follow these methods.

  Method 1: Follow these steps:

  1. go to the Skype website (see resources links to download Skype for Windows, Mac and Linux) and download the executable SkypeSetup.exe.

  (The software is installed under the Program Files folder in a directory called Skype, which is automatically created. A Skype installer icon is automatically created on your desktop).

  2. click on the Skype Setup icon located on your desktop. A Skype Setup Wizard will appear. You will get a warning window asking if you want to run or save this file: SkypeSetup.exe. Click on 'run '.

  Note: Another confirmation message may appear, asking if you are sure you want to run this software. Click again on 'run '.

  3 follow the instructions on the Skype Setup Wizard to complete the installation of the Skype software. At the end of the installation, you will be asked to create a Skype account.

  4. a Skype window will appear, and if you've never used Skype before, you can create a Skype account. You will see a link on the window stating the following: "don't have a Skype name?

  Click on this link and it opens another window "Skype - create a new account", where you type your display name, and then type a Skype name and a Skype password and repeat password in the respective fields on this window.

  Note: Note your Skype name and password because you will need every time that you open the Skype application.

  5. click on the button "connect".

  Note: After you create your new Skype account for the first time, the next time you open Skype, your Skype name to appear automatically in the Skype Name field. All you need to do is enter your Skype password and click the button "connect".

  6 follow the instructions in the "Getting Started" guide to add a contact, using the button 'Add Contact'; to test your headset and microphone, using the "Skype call Test function; to set up a conference call with a business colleague or friend; and explore all the other features of Skype.

  7. Once you have installed the Skype software, there are two ways you can open the Skype application. Click the "Skype" icon on your desktop, or double-click on the 'x' icon in the desktop system tray to start Skype at any time.

  Method 2: Put the computer in a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting steps, follow step 7 in the link to return the computer to a Normal startupmode.

  Try to install the program as an administrator.

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-run-an-application-once-with-a-full-administrator-access-token