Ant with WebLogic 10.3 build error

Similar Questions

• Build error cannot find the distribution under construction

  I had a similar problem like this thread.

  http://forums.NI.com/T5/LabVIEW/build-error-can-t-find-distribution-being-built/TD-p/1462842/page/2

  My old guard Installer and ask for copy of the installation is finish. Quite annoying because it takes so long to get there. Any advice would be appreciated. I've attached a screenshot of my error message.

  You created this problem by running a build already install on your development computer. If you are distributing drivers with your installer you should NEVER run the installation program on the machine on which you build.

  Here's what happens:

  All software shops NOR where it was installed since in the Windows registry. When you initially installed it note where you install (DVD, network drive, etc.).

  When you build an installer in TestStand will prompt for this location if it cannot find the original installation files (that is, if you take the DVD from the drive disconnected from the PC from the network, etc.)

  What happened on this PC is you have to build a Setup program, and then you run this installer on the PC, and because the pilots were already present it replaced the path stored in the registry with the path where your Installer (e.g.) was C:\Temp\long path)

  I'm guessing that you have now deleted this former Installer. That means that you have to re - run installers for ALL the software to, OR that you have installed on this machine so the registry is updated to point to the path of DVD or the network path.

• Build error when you create the Provisioning package picture

  Hi all

  I'm trying to create a master Windows IOT image by using the tool of IDC (imaging and designer of Configuration).

  I created a package of commissioning and using"customization of the Windows Image" to create a kernel ITO image by specifying the configuration previously created package but still get a build error.

  It looks like a fairly simple process, but repeatedly gives the error below. Also, I have not all USB devices connected to the computer, nor are there insufficient memory problems.

  ERROR

  =====

  Progress of the staging: 75%
  Staging failed to: 75% complete
  UpdateDLL: Measurement of results:
  Staging of total time: seconds = 27 (tickcount = 27235)
  Error: imagery! UpdateImage: Failed call to UpdateDLL::PrepareUpdate with the error code:-2145877241 (0 x 80188307)
  DismountVirtualHardDiskByFileName: disassembly image C:\Users\Shridhar\AppData\Local\Temp\8eceab63e9b746c0a9c65848679d56eb.vhd
  DismountFullFlashImage: [0.219] cleanup of temporary access roads.
  CleanupTemporaryPaths: Cleaning of temporary path C:\Users\Shridhar\AppData\Local\Temp\IMG39F3.tmp\.
  Storage service: disassembly of the image in 0.2 seconds.
  Imaging: See Flash.cbs.log and Flash.csi.log for more details.
  Imaging: Performance results:
  Total running time: 00:00:52.7198674
  Time of image creation: 00:00:00.0642425
  Writing FFU Time: 00:00:00
  Battery storage time: 00:00:17.8667874

  Any help would be greatly appreciated.

  Hello

  Your question is beyond the scope of this community...

  Repost in the TechNet Forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  Or MSDN Forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.

• build error of createUser using the c# code sample

  I get the following build error when you use the c# code for the createUser use method example.

  I use VisualStudio2008 and the Blackberry_Admin_API - 5.0 - US.pdf c# code example.

  Build error States:

  Cannot implicitly convert type 'BESAdmin.BASemailExchangeWebService.EnableBlackBerryUserAttributesType' in 'BESAdmin.BASCoreWebService.EnableBlackBerryUserAttributesType' C:\VS2008\BESAdmin\BESAdmin\Form1.cs 76 488 BESAdmin

  The build error is on this part of the code:

  for (int j = 0; j)< attributes.enableblackberryuserattributes.length;="">

  {

  userEnableBBAttributes.enableBlackBerryUserAttributes [j] = attributes.enableBlackBerryUserAttributes [j];

  }

  Everyone has this same problem and found the solution?  It seems that there is something missing or incorrect in the sample code around type conversion between the EnableBlackberryAttributesType.

  Thank you, Ed

  Hi Ed,

  I tried throwing the code example in a project already created the mine and has not known this error at compile. The two types of objects must be the same, so I don't know why there is no conflict with assignment.

  Please try to use the sample code to create a user from the BAA API reference documents:

  http://www.BlackBerry.com/developers/docs/BAA/5.0.0/

  Or the Knowledge Base of the developer section:

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/1608023/How_To_-_Get _...

  It can also be a good idea to recreate your proxy to do this.

  Let us know if the problem is still evident with the examples above.

• chronic build error

  Since today, I get a build error in all of my projects:

  Error occurred during the build.

  Errors under builder "App descriptor Validator" of the project "MNKit".

  java.lang.NullPointerException

  Google gives no guidance on this. Restarting Momentics, or clean up projects does not help.

  At the opening of bar - descriptor.xml, I get:

  java.lang.NullPointerException
  to com.qnx.tools.bbt.core.signing.BarSignerTool. (BarSignerTool.java:105)
  to com.qnx.tools.ide.bbt.internal.core.BBTNativeSDKProvider$ BBTNativeSDKDescriptor.getBarSigner (BBTNativeSDKProvider.java:172)
  at com.qnx.tools.bbt.core.sdk.AbstractBlackBerryTabletSDKDescriptor.getValidator(AbstractBlackBerryTabletSDKDescriptor.java:122)
  at com.qnx.tools.ide.bbt.internal.core.BBTNativeSDKProvider.getValidSDKs(BBTNativeSDKProvider.java:97)
  to com.qnx.tools.bbt.core.sdk.IBlackBerryTabletSDKDescriptor$ IRegistry$ Impl.collectValidSDKs (IBlackBerryTabletSDKDescriptor.java:327)
  to com.qnx.tools.bbt.core.sdk.IBlackBerryTabletSDKDescriptor$ IRegistry$ Impl.getValidSDKs (IBlackBerryTabletSDKDescriptor.java:311)
  at com.qnx.tools.bbt.internal.core.utils.BlackberryTabletSDKUtils.getAvailableTargetPlatformVersions(BlackberryTabletSDKUtils.java:130)
  at com.qnx.tools.bbt.xml.internal.ui.editor.bbtxml.forms.GeneralAdvancedPart.getAvailablePlatformVersions(GeneralAdvancedPart.java:146)
  to com.qnx.tools.bbt.xml.internal.ui.editor.bbtxml.forms.GeneralAdvancedPart. (GeneralAdvancedPart.java:69)
  at com.qnx.tools.bbt.xml.internal.ui.editor.bbtxml.forms.GeneralPage.createLeftContent(GeneralPage.java:65)
  at com.qnx.tools.bbt.xml.internal.ui.editor.bbtxml.forms.GeneralPage.createFormContent(GeneralPage.java:54)
  at com.qnx.tools.bbt.xml.internal.ui.editor.bbtxml.forms.BBTFormPage.createFormContent(BBTFormPage.java:92)
  to org.eclipse.ui.forms.editor.FormPage$ 1.run(FormPage.java:152)
  at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70)
  at org.eclipse.ui.forms.editor.FormPage.createPartControl(FormPage.java:150)
  at org.eclipse.ui.part.MultiPageEditorPart.addPage(MultiPageEditorPart.java:241)
  at org.eclipse.ui.forms.editor.FormEditor.addPage(FormEditor.java:325)
  at org.eclipse.ui.part.MultiPageEditorPart.addPage(MultiPageEditorPart.java:211)
  at org.eclipse.ui.forms.editor.FormEditor.addPage(FormEditor.java:308)
  at com.qnx.tools.bbt.xml.internal.ui.editor.bbtxml.BBTXMLEditor.addBBTPage(BBTXMLEditor.java:233)
  at com.qnx.tools.bbt.xml.internal.ui.editor.bbtxml.BBTXMLEditor.createGeneralPage(BBTXMLEditor.java:240)
  at com.qnx.tools.bbt.xml.internal.ui.editor.bbtxml.BBTXMLEditor.addPages(BBTXMLEditor.java:324)
  at org.eclipse.ui.forms.editor.FormEditor.createPages(FormEditor.java:138)
  at org.eclipse.ui.part.MultiPageEditorPart.createPartControl(MultiPageEditorPart.java:348)
  at org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:670)
  at org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:465)
  at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:595)
  at org.eclipse.ui.internal.EditorReference.getEditor(EditorReference.java:289)
  at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditorBatched(WorkbenchPage.java:2945)
  at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditor(WorkbenchPage.java:2850)
  to org.eclipse.ui.internal.WorkbenchPage.access$ 11 (WorkbenchPage.java:2842)
  to org.eclipse.ui.internal.WorkbenchPage$ 10.run(WorkbenchPage.java:2793)
  at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70)
  at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2789)
  at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2773)
  at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2764)
  at org.eclipse.ui.ide.IDE.openEditor(IDE.java:651)
  at org.eclipse.ui.ide.IDE.openEditor(IDE.java:610)
  at org.eclipse.ui.actions.OpenFileAction.openFile(OpenFileAction.java:99)
  at org.eclipse.ui.actions.OpenSystemEditorAction.run(OpenSystemEditorAction.java:99)
  at org.eclipse.ui.actions.RetargetAction.run(RetargetAction.java:221)
  to org.eclipse.ui.navigator.CommonNavigatorManager$ 3.open(CommonNavigatorManager.java:185)
  to org.eclipse.ui.OpenAndLinkWithEditorHelper$ InternalListener.open (OpenAndLinkWithEditorHelper.java:48)
  to org.eclipse.jface.viewers.StructuredViewer$ 2.run(StructuredViewer.java:866)
  at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42)
  to org.eclipse.ui.internal.JFaceUtil$ 1.run(JFaceUtil.java:49)
  at org.eclipse.jface.util.SafeRunnable.run(SafeRunnable.java:175)
  at org.eclipse.jface.viewers.StructuredViewer.fireOpen(StructuredViewer.java:864)
  at org.eclipse.jface.viewers.StructuredViewer.handleOpen(StructuredViewer.java:1152)
  at org.eclipse.ui.navigator.CommonViewer.handleOpen(CommonViewer.java:462)
  to org.eclipse.jface.viewers.StructuredViewer$ 6.handleOpen(StructuredViewer.java:1256)
  at org.eclipse.jface.util.OpenStrategy.fireOpenEvent(OpenStrategy.java:275)
  to org.eclipse.jface.util.OpenStrategy.access$ 2 (OpenStrategy.java:269)
  to org.eclipse.jface.util.OpenStrategy$ 1.handleEvent(OpenStrategy.java:309)
  at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
  at org.eclipse.swt.widgets.Display.sendEvent(Display.java:4128)
  at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1457)
  at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1480)
  at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1465)
  at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:1270)
  at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3974)
  at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3613)
  at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2701)
  at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2665)
  to org.eclipse.ui.internal.Workbench.access$ 4 (Workbench.java:2499)
  to org.eclipse.ui.internal.Workbench$ 7.run(Workbench.java:679)
  at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
  at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:668)
  at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
  at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:123)
  at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
  at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
  at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
  at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:344)
  at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:622)
  at org.eclipse.equinox.launcher.Main.basicRun(Main.java:577)
  at org.eclipse.equinox.launcher.Main.run(Main.java:1410)

  I am running on a Mac with the new Oracle Java 1.6.0.37 Mountain Lion.

  solved.

  Re-install Momentics and the simutaor is done.

• An unexpected build error has occurred: index was outside the bounds of the array

  Hello

  I use OPA version 12.1.1 (November 2015 edition of cloud).

  When I try to debug my OPA project I get this error:

  "An unexpected build error has occurred: index was outside the bounds of the array.

  Does anyone of you understand what that means?

  Kind regards

  Xavier M.

  What language / region is your project?

  You are able to apply for service with the support of Oracle?  This error usually requires the investigation of the project to determine the root cause.

• weblogic.application.WrappedDeploymentException: [LDAP: error 32 - No Such Object code] weblogic.application.WrappedDeploymentException: [LDAP: error 32 - No Such Object code]

  Hello guys, I encounter the above error while trying to redeploy applications Saas Extension JCS service.

  Anyone has any ideas on what is causing this? Here is the complete Log file

  2015-04-23 00:21:23 PDT: Starting action "Deploy Application"
  2015-04-23 00:21:23 PDT: Deploy Application started
  2015-04-23 00:21:32 PDT: weblogic.application.WrappedDeploymentException: [LDAP: error code 32 - No Such Object]weblogic.application.WrappedDeploymentException: [LDAP: error code 32 - No Such Object]
    at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:3112)
    at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:3033)
    at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2840)
    at com.sun.jndi.ldap.LdapCtx.searchAux(LdapCtx.java:1849)
    at com.sun.jndi.ldap.LdapCtx.c_search(LdapCtx.java:1772)
    at com.sun.jndi.toolkit.ctx.ComponentDirContext.p_search(ComponentDirContext.java:386)
    at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.search(PartialCompositeDirContext.java:356)
    at javax.naming.directory.InitialDirContext.search(InitialDirContext.java:276)
    at oracle.security.jps.internal.common.ldap.util.JpsLdapCommonUtil.search(JpsLdapCommonUtil.java:261)
    at oracle.security.jps.internal.common.ldap.util.JpsLdapCommonUtil.search(JpsLdapCommonUtil.java:221)
    at oracle.security.jps.internal.policystore.ldap.JpsLdapDataManager.jpsObjectListQuery(JpsLdapDataManager.java:778)
    at oracle.security.jps.internal.policystore.entitymanager.impl.InternalQueryManagerImpl.getAttributes(InternalQueryManagerImpl.java:424)
    at oracle.security.jps.az.internal.management.pd.service.GenericPolicyDistributionService.getAttributes(GenericPolicyDistributionService.java:949)
    at oracle.security.jps.az.internal.management.pd.service.GenericPolicyDistributionService.internalGetAppPolicyEntry(GenericPolicyDistributionService.java:732)
    at oracle.security.jps.az.internal.management.pd.service.GenericPolicyDistributionService.getAppPolicyEntry(GenericPolicyDistributionService.java:668)
    at oracle.security.jps.az.internal.management.pd.service.GenericPolicyDistributionService.getAppPolicyEntry(GenericPolicyDistributionService.java:412)
    at oracle.security.jps.az.internal.management.pd.service.PolicyDistributionServiceImpl.getAppPolicyEntry(PolicyDistributionServiceImpl.java:175)
    at oracle.security.jps.az.internal.runtime.policy.ApplicationPolicyImpl.initWithAppPolicyEntry(ApplicationPolicyImpl.java:307)
    at oracle.security.jps.az.internal.runtime.policy.ApplicationPolicyImpl.initAppPolicy(ApplicationPolicyImpl.java:284)
    at oracle.security.jps.az.internal.runtime.policy.ApplicationPolicyMap.get(ApplicationPolicyMap.java:113)
    at oracle.security.jps.az.internal.runtime.service.PDPServiceImpl.getApplicationPolicy(PDPServiceImpl.java:845)
    at oracle.security.jps.az.internal.runtime.service.PDPServiceImpl.getApplicationPolicy(PDPServiceImpl.java:796)
    at oracle.security.jps.internal.policystore.PolicyUtil.getGrantedAppRoles(PolicyUtil.java:3005)
    at oracle.security.jps.internal.policystore.PolicyUtil.getJpsAppRoles(PolicyUtil.java:1968)
    at oracle.security.jps.internal.policystore.PolicyUtil.getJpsAppRoles(PolicyUtil.java:1913)
    at oracle.security.jps.internal.core.util.SubjectResolverComputor$1.run(SubjectResolverComputor.java:152)
    at oracle.security.jps.internal.core.util.SubjectResolverComputor$1.run(SubjectResolverComputor.java:143)
    at java.security.AccessController.doPrivileged(Native Method)
    at oracle.security.jps.internal.core.util.SubjectResolverComputor.getAppRoles(SubjectResolverComputor.java:143)
    at oracle.security.jps.internal.core.util.SubjectResolverComputor.compute(SubjectResolverComputor.java:123)
    at oracle.security.jps.internal.core.util.SubjectResolverCacheImpl.computeJpsSubject(SubjectResolverCacheImpl.java:207)
    at oracle.security.jps.az.internal.runtime.service.PDPServiceImpl.computeJpsSubject(PDPServiceImpl.java:2376)
    at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver.resolveJpsSubject(JpsAbsSubjectResolver.java:216)
    at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver.resolveSubject(JpsAbsSubjectResolver.java:175)
    at oracle.security.jps.ee.jmx.JpsJmxInterceptor.internalPreRegister(JpsJmxInterceptor.java:461)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPreRegister(AbstractMBeanInterceptor.java:180)
    at oracle.as.jmx.framework.generic.spi.interceptors.DefaultMBeanInterceptor.internalPreRegister(DefaultMBeanInterceptor.java:81)
    at oracle.as.jmx.framework.generic.spi.interceptors.ContextClassLoaderMBeanInterceptor.internalPreRegister(ContextClassLoaderMBeanInterceptor.java:150)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPreRegister(AbstractMBeanInterceptor.java:180)
    at oracle.as.jmx.framework.generic.spi.interceptors.DefaultMBeanInterceptor.internalPreRegister(DefaultMBeanInterceptor.java:81)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPreRegister(AbstractMBeanInterceptor.java:180)
    at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterMBean.preRegister(OracleStandardEmitterMBean.java:619)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.preRegister(DefaultMBeanServerInterceptor.java:1007)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerDynamicMBean(DefaultMBeanServerInterceptor.java:919)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerObject(DefaultMBeanServerInterceptor.java:900)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerMBean(DefaultMBeanServerInterceptor.java:324)
    at com.sun.jmx.mbeanserver.JmxMBeanServer.registerMBean(JmxMBeanServer.java:522)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$27.run(WLSMBeanServerInterceptorBase.java:714)
    at java.security.AccessController.doPrivileged(Native Method)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.registerMBean(WLSMBeanServerInterceptorBase.java:709)
    at weblogic.management.mbeanservers.internal.JMXContextInterceptor.registerMBean(JMXContextInterceptor.java:445)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$27.run(WLSMBeanServerInterceptorBase.java:712)
    at java.security.AccessController.doPrivileged(Native Method)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.registerMBean(WLSMBeanServerInterceptorBase.java:709)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServer.registerMBean(WLSMBeanServer.java:462)
    at oracle.as.jmx.framework.wls.spi.security.PrivilegedMBeanServerInterceptor$1.run(PrivilegedMBeanServerInterceptor.java:55)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at oracle.as.jmx.framework.wls.spi.security.PrivilegedMBeanServerInterceptor.registerMBean(PrivilegedMBeanServerInterceptor.java:60)
    at oracle.mds.internal.lcm.MDSLifecycleListenerImpl.start(MDSLifecycleListenerImpl.java:173)
    at oracle.mds.lcm.weblogic.WLLifecycleListener.preStart(WLLifecycleListener.java:77)
    at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:290)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:207)
    at weblogic.application.internal.flow.BaseLifecycleFlow.preStart(BaseLifecycleFlow.java:64)
    at weblogic.application.internal.flow.HeadLifecycleFlow.prepare(HeadLifecycleFlow.java:283)
    at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
    at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
    at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
    at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
    at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:61)
    at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:208)
    at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:98)
    at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:221)
    at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747)
    at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)
    at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250)
    at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171)
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:13)
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:46)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
  
  
  
  
  2015-04-23 00:21:32 PDT: WL action state: failed
  2015-04-23 00:21:32 PDT: Action FAILED with WL action state: failed
  2015-04-23 00:21:32 PDT: Check the server log of your Java cloud service for more info about the failure.
  2015-04-23 00:21:32 PDT: Application deployment failed.
  2015-04-23 00:21:32 PDT: "Deploy Application" complete: status FAILED
  

  Nothing major changes, it seems that the thrown exception is quite misleading. I created a new profile of deployment and everything seemed to work very well. Not very well why things went south at the start after having been previously successful

• Build PhoneGap service "build error.

  I can't with Dreamweaver CC and PhoneGap Service of Build. I get "build error" and when I click on the button 'show' he says: "unable to download the application. (I build for Android only.) And build.phonegap.com my application name changed to 'PhoneGap Build Project' why? He had the good name before... And said the version 1.0.0 which is also wrong. The app ID is: 819335

  Hi Moki,

  Could you please download the zip file of the project on build.phonegap.com and build and tell me if you are faced with the same question.

  This could help solve your problem.

  Thank you

  Confidante

• Problem with Weblogic using xdo_user_name

  Greetings,
  
  I'm looking for some using the help: xdo_user_name. I have two environments. What follows
  query works in one but not the other:
  
  Select: xdo_user_name of double;
  
  The first environment is:
  
  Solaris 10
  BIPUB 10.1.3.4.1
  OC4J
  BI Publisher authentication
  
  The second is:
  
  Solaris 10
  BIPUB 10.1.3.4.1
  WebLogic 10.3.3
  LDAP authentication
  
  I've created a report in each environment with this unique request:
  
  Select: xdo_user_name of double;
  
  Then ran by selecting 'DATA' as output. In the OC4J, its operating environment and returned the following:
  
  rowset <>
  < ROW >
  Administrator < _XDO_USER_NAME > < / _XDO_USER_NAME >
  < / ROW >
  < / LINES >
  
  When I ran in the Weblogic environment, it failed with the following error:
  
  The report cannot be made because of an error, please contact the administrator.
  
  1 has anyone used successfully xdo_user_name in a Weblogic environment?
  2. is there a log I can check what is causing the error?
  
  Thanks for your help.
  
  Larry

  Larry, there is no link with weblogic in here, nor the environment.
  You are at the correct version level. application, so it should work.

  XDO_USER_NAME is the predefined variables available @ application-level.

  Select: Double XDO_USER_NAME should work, if you have selected the correct data source, ORACLE DB.

  And my proposal is still on the data source: ORACLE DB for the report and the LDAP authentication.

• An internal build error has occurred.  Check the error log. ?

  I get this message in Flex 2.0 "an internal build error has occurred. Please check the error log. "Does anyone know how to fix this?

  I was getting this error because I had one this line of code
  var temp: XML = ;

  in any case... my bad... If the compiler sees something really wrong with your code he goes into panic mode and doesn't show you any errors... :) Gotta make sure that your code is valid...

• An internal build error has occurred.  Please check the error log.

  All of a sudden today while working on a project, I got this error message in the issues window:
  
  "An internal build error has occurred. Please check the error log. »
  
  The background in the my application has been configured for white, now even that returns to the default gray
  
  Any help would be appreciated. The file of the only error I can find at the root of FlexBuilders is called hs_err_pid3140
  
  Thank you

  After a few hours of searching, I found a forum with a lot of these questions. I'm posting the links here just in case someone else has the same problem.

  Basically, it's a bug, and nobody really knows what the exact correction is... but some of the solutions have worked. For me, I copied my project files in a backup folder. Delete the project. Created a new project and copied the files back.

  http://tech.groups.Yahoo.com/group/flexcoders/message/69312

  http://tech.groups.Yahoo.com/group/flexcoders/message/68604

  http://tech.groups.Yahoo.com/group/flexcoders/message/62112

  http://tech.groups.Yahoo.com/group/flexcoders/message/61840

  http://tech.groups.Yahoo.com/group/flexcoders/message/57573

  http://tech.groups.Yahoo.com/group/flexcoders/message/51696

  http://tech.groups.Yahoo.com/group/flexcoders/message/41079

• TopLink 10.1.3.1 compatible with weblogic server 11g

  When the server deployment of weblogic 11 g using EPCO, I get the following error:
  
  java.lang.VerifyError: (class: method com/co/proj/toplink/TimeTrackProject: < init > signature: (V)) Incompatible argument of the function
  at com.co.db.core.DBConnFactory.initSessionsPoolExternal(DBConnFactory.java:109)
  at com.co.db.core.DBConnFactory.initSessionsPoolExternal(DBConnFactory.java:66)
  at com.co.db.core.DBConnFactory.init(DBConnFactory.java:46)
  at com.co.db.core.DBConnInitializer.contextInitialized(DBConnInitializer.java:43)
  to weblogic.servlet.internal.EventsManager$ FireContextListenerAction.run (EventsManager.java:465)
  Truncated. check the log file full stacktrace
  
  TimeTrackProject extends the Project class in the container of toplink - 10.3.
  
  Are there problems of compatibility with weblogic 11g and toplink 10.1.3.1?

  The TopLink old versions were not certified on the latest releases of WebLogic. Oracle TopLink 11 g (11.1.1.0.0) has been certified on WebLogic 10.3.0 and GR 11, 1 (11.1.1.1.0) material has been included with WebLogic 10.1.3.1 as a module of the system. You can experience a conflict between TopLink libraries included, and you've built your application against the older. I would recommend rebuild your application with bundled with WLS 10.3.1 TopLink libraries and not understanding is not the old version.

  If this isn't an option, then you will need to use a notifier of classpath request to ensure that TopLink libraries in the WLS 10.3.1 system module is not used.

  Doug

• Program of build error

  I'm doing payment batch Release 12 via a payment Manager.
  
  The Bill who are chosen by the payment request process belong to 2 operating units. The problem with do build on wrong progam.
  
  The output file shows the following message:
  "Program of build error: Exception occurred trying to create payments to pay documents of the application for payment service provided."
  
  The log file is the following:
  
  ---------------------------------------------------------------------------
  Payments: Version: 12.0.0
  
  Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
  
  Module IBYBUILD: build payments
  ---------------------------------------------------------------------------
  
  Current system time is June 22, 2009 15:08:50
  
  ---------------------------------------------------------------------------
  
  * Starts * June 22, 2009 15:08:50
  * Ends * June 22, 2009 15:09:08
  CREATE PROGRAM ERROR - CANNOT CREATE PAYMENTS
  ---------------------------------------------------------------------------
  Beginning of the FND_FILE log messages
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  End of the FND_FILE log messages
  ---------------------------------------------------------------------------
  
  
  ---------------------------------------------------------------------------
  Options, AutoComplete, the request for enforcement.
  
  
  End of query options AutoComplete.
  
  ---------------------------------------------------------------------------
  Simultaneous request ended
  Current system time is June 22, 2009 15:09:09
  
  
  Could someone please provide a solution for this.
  
  You can email me at [email protected]

  Hello

  Please refer to this document.

  Note: 558114.1 - R12: build the program ends with the error after examining the RUP4 invoices
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=558114.1

  Kind regards
  Hussein

• 11.1.1.1 with WebLogic Server 10.3 EPM system

  I'm installing 11.1.1.1 EPM system and that you have already installed WebLogic Server 10.3, which seems to be the Oracle AS 10gR 3 GPE 11.1.1.1-compatible server.
  
  However, I get the following error:
  The specified location is a directory of Oracle AS 10 g 3 invalid. Specify a valid location.
  
  11.1.1.1 EPM system is compatible with WebLogic Server 10.3?
  Y at - it a 10gR 3 Oracle AS different I should use? If Yes, where can I get it?
  
  Thank you
  Mark

  Hello

  I don't think that it is officially supported for 11.1.1.1.
  Take a look on:-http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_install_start_here_11111/ch04s03s01.html
  It lists the supported web application servers.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• When I sync my iPhone with iTunes, I get an error saying I need to download the latest version of iTunes.  When I try to download it says I'm using the latest version?

  I have an iPhone SE

  my iTunes is on my laptop HP addition running Windows Vista. (32 bit not 64) It is not able to upgrade to Windows 7.

  When I plug my iPhone to sync with iTunes, it gives an error message saying that I need to download the latest version of iTunes.  When I try to do, I get a message saying that my iTunes is up to date with the latest version of iTunes?   If my laptop is running vista only she does support the latest version?  If this is the problem I wish iTunes download center say the my device does not support the latest version of iTunes.  the version I currently have is the only one my device is available for download.

  How to access my library iTunes other than buying a new laptop

  IPhone WILL not work with Vista. It is not supported. Can't remember where I saw it, but there was something about Windows Vista not supported for iPhone SE. I'll keep looking.

  Found at the bottom of the iTunes download support page.  Download iTunes 12.1.3 for Windows (32 bit)

  This update allows you to synchronize your iPhone *, iPad * or iPod touch with iOS 9.x and earlier on Windows XP and Windows Vista PC.

  * iPhone OS and iPad Pro (9.7 inches) is not supported on Windows XP or Windows Vista.