Satellite A210-1BX: XP Pro SP2 cannot change the brightness of the display

Similar Questions

• You cannot change the display settings on the reference monitor

  I'm unable to change the display setting in the reference monitor.  right mow my only options are composite video and alpha.

  What do you want to take it?

  If you are referring to the scopes. They no longer exist.

  Now, its Lumetri: work/Lumetri extended space.

• Re: Satellite A210-10 has, crashes when you change the boot order

  Hello

  I have a serious problem with my computer Toshiba laptop, Windows Vista 32-bit, clocked at 1.8 Ghz, 2 GB RAM, AMD Turion 64 x 2
  There is only a single disk partitioned into two drives of 75 GB (C and E).

  The problem is that whenever I enter the start menu (for boot from CD), or if I change in the BIOS boot order and restart, the computer hangs (power cut off suddenly).
  So the only way to recover, is to connect the AC/DC adapter, wait 5 minutes and repeat. Then, everything lights up normally or launches of Windows system recovery, after what he will restart and work very well.

  It would be important to know that I partitioned the drive to have 30 GB for installing Win7 later. The problem is that I've never tried to change the boot order before repartitioning, so I don't know if it has something to do with the problem or if it was there before.

  Any help or suggestion would be appreciated.

  Thank you

  Post edited by: bambula

  Hello

  > The problem is that whenever I enter the start menu (for boot from CD), or if I change in the BIOS boot order and restart, the computer hangs (power cut off suddenly).

  It seems that the issue related to the Bios. Have you tried to put update or reflash?

  > The problem is that I've never tried to change the boot order before repartitioning, so I don't know if it has something to do with the problem or if it was there before.

  Maybe this has happened before, but you don't check.

• HPDM 4.6 SP2 - cannot change the screen resolution Options

  Hello

  every time when I try to change the resolution of the screen via HPDM (task "Apply settings" or directly as a command in "Files and records"), I get the following errors:

  * task failed

  * command line error

  Original messages:

  2015-01-05 14:35:02 von implement common-task fehlgeschlagen.

  2015-01-05 14:35:02 Fehlercode: 14004022, Fehlerdetails: Befehlszeilenfehler.

  The same command (-C:\Windows\xpeagent\setw7disp.exe width = 1440 height = 900 depth = 32 = 60 rate) - run commandline works very well. Other tools such as qres.exe does not work. Does anyone have a solution for this problem?

  Concerning

  Thomas

  Thank you for your quick response.

  I think that this problem is resolved. The version of the agent is ok, but the combination of resolution, depth and refresh was bad for our display. With the right value, it works.

  Thank you

  concerning

  Thomas

• I am Admin on my PC, but cannot change the display settings.

  I have vista home premium and I can't change my wallpaper. I am logged on as administrator and can change most of the other settings, but a box tells be that the administrator has blocked the launching of the display settings control panel. I don't think that I have never done this, not intentionally at least. I tried to use the parameters of Environmental Variables, but it's like a foreign language to me - I don't know what to do with it. I don't have time for this! I have a job to do. Does anyone know an easy fix for this?

  Hello wall14hm,

  Here is one link: http://windows.microsoft.com/en-us/windows-vista/Change-your-desktop-background-wallpaper which will help you in detail on how to change your screen background image (background). Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Satellite A200 - 26 d: installed XP & cannot change the brightness of the screen or scroll

  After having removed Vista and installed XP Pro I find now that I can't adjust the screen brightness (F6 & F7) - HELP Please!

  (also scroll touchpad doesn't work anymore?)

  Maybe you need to update the BIOS to version XP one then you should reinstall all the drivers available Toshiba and tools again.

• I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00. All options are not enabled. How can I change the time, updates are made? __

  I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00.  All options are not enabled.  How can I change the time that updates are made?

  Hi imoffshore,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         When was the last time it worked?

  ·         Remember to make changes to the computer recently?

  ·         You have security software installed on the computer?

  ·         You get the error message?

  When you open the tab automatic updates in the control panel or My Computer property sheet, all options of configuration of the automatic updates may be grayed out. This happens due to one of the following reasons:

  1. You are not logged as administrator (or equivalent)
  2. Strategy of automatic updates is enabled
  3. Automatic updates (and Windows Update) access is blocked by group policy

  The options available for automatic updates.

  You must make some changes in the windows registry.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  • Click Start, run and type REGEDIT to . EXE
  • Go to this location:

  HKEY_LOCAL_MACHINE-SOFTWARE-policies-Microsoft-Windows------WindowsUpdate------AU

  • In the right pane, delete the two values AUOptions and NoAutoUpdate
  • Go to this location:

  HKEY_CURRENT_USER-SOFTWARE-Microsoft-Windows-CurrentVersion------policies------WindowsUpdate

  • In the right pane, delete the DisableWindowsUpdateAccess value

  Using the Group Policy Editor - for Windows XP Professional

  • Click Start, run and type gpedit.msc
  • Navigate to the following location:

  => Configuration of the computer
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, double-click Configure automatic updates and set it to not configured
  • Next, go to this location:

  => User configuration
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, set to remove access to all Windows Update features on not configured

  Change how Windows installs or notifies you of updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-installs-or-notifies-you-about-updates

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Good for laptop - cannot change the ISP; keep returning to a previous provider

  Windows 7 laptop of my grandson, I'm migrating FIREFOX (excellent resource!) of my aging XP desktop. An existing Mozilla installation on the guarded device tries to connect to an ISP in Sydney (1000km) which kept out, I guess because the signal is too weak. Too far - on the Internet?

  Reinstalled my new ISP contact, reinstalled a fresh copy of Firefox, copied the old profile XP (just underneath the random string file name), but cannot change the fault. Firefox at startup tries to raise the old ISP (Sydney) and expires, and then allowing me to establish a manual connect with the ISP (my current) new.
  Perhaps a clue: in my Firefox troubleshooting info, change preferences, the browser start page is the address of 'old', with 'override mstone' ignore, what look like prints of registry entries, but I can't change all that - and maybe it's wise! An annoying secondary question: on arrival, the laptop listed no administrator user. So I am me came as an administrator, but I wonder if a past or current even Admin hidden could register (or other) entered resistant to change.

  Late discovery: the laptop is apparently infected with browser pirate btsearch.name. Search Google throws a series of removal procedures, and I'm now working through them.
  What Miss me?

  Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • Anti-Rootkit utility - TDSSKiller
  • AdwCleaner (for more information, see this other AdwCleaner download page)
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  This solve your problems? Please report to us!

• NB550D-111 - can't change the display resolution after installing Win7 Pro

  Hi guys,.

  After you install a clean install of Windows 7 Professional I can't get resolution, more than 800 x 600.
  I went to the section of the driver and installed the good display driver for my NB550D-111: version 8.812.2.2 of the displaydriver.

  After a reboot, still nothing happens and I can't change the resolution.
  Trying to open the Catalyst Control Center results in nothing: I can't seem to open it.

  I spent hours and hours trying to solve this problem, but need help at the moment.

  See you soon,.

  Tim

  NB550D-111 has AMD HD graphics card 6250 and the same Satellite C660D (PSC1YE) or Satellite L775D (PSK5PE) then you can try using the display drivers for these laptops.

  I n t have experience with NBs and cannot confirm this will help, but you can try it and send feedback.

• I have download Acrobat 9 Pro, but cannot open the file.

  I have download Acrobat 9 Pro, but cannot open the file. I recently had to change my hard drive and have re - install everything again.

  I was able to download photoshop & illustrator, but can not Acrobat 9 pro

  Help, please

  even if your error seem not related to the issue discussed in this link, try it:

  http://Mac-how-to.WonderHowTo.com/how-to/open-third-party-apps-from-unidentified-Developer s-mac-os-x-0158095.

• Cannot change the verssion 10 vm

  Hello

  I've installed sql as database 2014 external vm on vcenter 2012 windows. (vm version is 10)

  now it is notwork is offline and I can't reconnect. (I use not cause of missing SQL web client and cannot change the vm version 10 or later through guest post)

  What can I do?

  Help me please...

  .. .i is unusable web client cause missing SQL and cannot change the vm version 10 or later through desktop client...

  It seems you are using a version of vSphere Client 5.5 pro update 2. Download the latest vSphere Client 5.5 VMware KB: download for VMware vSphere Client URL. It will always display a caveat about HW Version the virtual machine, but will allow you to modify most of the settings of virtual machines.

  Note: update the vSphere Client may raise an error, so please uninstall the current vSphere Client 5.5 and then install a new one.

  André

• cannot change the pdf document

  purchase the program and cannot change the pdf document

  Hi Michael,

  In order to remove the pages in a PDF using Acrobat Pro DC, you must choose "Arrange Pages" in the right pane, select the pages and choose the trash icon in the top bar (or use the delete key).

  Thank you

  -atul

• Cannot change the incoming mail server. no text highlight

  I am unable to send mail from my Mac.  No problem with iphone or iPad. Cannot change incoming mail server as text is not highlighted.  Cannot change the server for outgoing (SMTP) mail. Cannot change the list of SMTP servers. Says offline.

  Hi Granny Smith 1.

  Thank you for using communities Support from Apple. Sorry to hear that you are having problems with mail. It's a little bit clear exactly what you see when you say that you cannot change any server info, but if you continue to have problems sending or receiving mail, you will find the troubleshooting steps in the following article useful:
  

  If you cannot send or receive e-mail on your Mac - Apple Support

  Kind regards.

• Cannot change the Apple ID

  I'm changing my Apple ID, but when I try to change ID, it does not show the ability to 'change e-mail address '.  How can I get that option?

  You cannot change the name of the device.

  Sign of your ID, then click on my Apple ID and change the ID (you can not change if it's an address to iCloud)

• OfficeJet Pro 8600 N911a: Change the 2 sides of the print settings by default on JO 8600 Pro using Mac El Capitan

  I can't find a way to change the default settings of my printer on 2-sided - I cannot change the print job, but not the default!  In addition, with the print order option page.

  Hello

  In any program, click on file > print to open the print dialog box.

  Once the selection of the required parameters, you should see the menu breast high Preset dialog box print himself.

  Kind regards

  Shlomi