Installing Rockbox on V1 with the latest firmware

Similar Questions

• Sansa clip + 8 GB too quiet even with the latest firmware

  Just got my phone yesterday. Overall, I'm happy with it, but one thing ruins the image. The volume. It's just too much (* beep *?) quiet. Even if I it max on the whole, it's just not strong enough for public transport for example. That I use quite often. | As soon as I got the player, I did an update of the firmware. If this isn't the problem. What I could do to make it stronger? Is there a firmware for it? A hack? No matter what? I would be really happy if there would be something... (I use a headphones Sennheiser CX200 (IIRC) with the device that's not so bad, so I guess that isn't also the problematic part.). Thanks for the replies. (PS: I tried to search the forums. Found only subjects as even the lowest volume is too loud. What the devil? ^^".. (no, my hearing is well before all the world would ask.))

  Install it again or use reset the factory settings and on the screen that shows the North America, europe, rest of the world to ensure that you do not choose Europe.

• Impossible to install Brother printer (even with the latest drivers for windows 7). I suspect it's other print network drivers. During installation, the Brother software reports "the operation cannot be completed (error 0 x 00000706).» The print processor

  I upgraded from Vista to Windows 7
  When I try to add the printer manually, I can't select all ports.

  Plug the printer causes Windows to try to install a driver, but it fails.

  I suspect it was due to my University Pharos printing system. (It worked when I updated from Vista). After that I installed Win7 and started having all these problems, I was unable to uninstall due to errors of RPC ports. So I deleted manually and deleted all the registry entries.

  Installation of a Brother printer still does not work.

  Is anyway to reset all the settings of the printer? Wipe the slate clean? To restore all network ports?
  Thank you!

  ===
  Edit: I read other entries... My Printer Spooler kept crashing before and I had to restart via services.msc
  Also ran sfc/scannow without error
  Edit: I have since deleted all other printers listed in the management of printing, restarted, but still there is no listed ports.

  OK, I found the solution. It turned out that all my print processors and ports have been replaced by the Pharos system (used by my University to charge for printing) DLLS. After the upgrade from Vista to Windows 7, it did not work.

  They have become like this:

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Print Processors\winprint]
  «Pilot '=' "PSS08B07."» DLL.
  "PSDriverLink"="winprint.dll".
  «C:\\Windows\\system32\\spool\\PRTPROCS\\W32X86\\PSS08B07 "=" PSDriverPath "."» DLL.

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors\USB Monitor]
  «Pilot '=' "C:\\Windows\\system32\\PSS08B05."» DLL.
  "PSDriverLink"="usbmon.dll".
  «C:\\Windows\\system32\\PSS08B05 "=" PSDriverPath "."» DLL.

  etc...

  ============

  Manually, I changed ALL the print processors, drivers and ports in CurrentControlSet, CurrentControlSet1, CurrentControlSet2 to their original values and deleted the Pharos irritating ones.
  i.e.
  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Print Processors\winprint]
  "Driver"="winprint.dll".

  etc...

  restarted and it worked!
  Too bad, the troubleshooting of Microsoft tool could not detect it.

  See you soon!

• Download the latest firmware for Toshiba 40RL838G

  Can someone give me a link where to download the latest firmware for 40RL838G?
  I want to update with the USB (no internet connection available)

  Latest firmware (in the firmware information) is 6.4.0V.1, but TV has 6.1.oK.1 (21.Oct 2011)
  With this firmware, I have problems with the channellist.

  Thank you

  I guess that you won't find it for download.

  The info says:
  Updates to energy efficiency TL838/868 RL838/858
  Energy efficiency upgrades were made to the series RL838/858 both TL 838/868. In order to update your TV with the latest firmware and take advantage of these changes, please follow the methods below:

  * Please note that the TV must have an active internet connection to update the firmware.

  Internet access can be obtained by connecting to the local network or WiFi (using the required WiFi dongle)

  Connection can be confirmed by doing a trial of network connection. This can be done by selecting preferences-> network-> Network Connection Test configuration

  * Method 1: *.
  _Automatic network warning
  When the TV goes to sleep the network SW update is checked on the power on the TV, the following message will appear (after 1-2 minutes):
  A software update is available. You want to upgrade? Yes/No, to update your TV select Yes.

  * Method 2: *.
  _Manual network warning
  In order to make searching for a firmware update anytime TV in time to follow the instructions below:
  Select Setup-> Software Upgrade menu-> Select network update
  The TV will then focus on the network for the new firmware and if possible a update command prompt will appear

  If you need the device to the network

• Recognition of devices with the new firmware on EA3500

  Under devices, I find that my laptop Apple (WIFI connection) and our Dell Desktop (LAN) connection are considered to be the same device.  The operating system shows the EA3500 of this device is the system connections apple IOS and address numbers displayed in this device.  It is therefore impossible to set parental control separately on each computer.  What could I do to get the EA3500 to recognize these separate devices?  I tried to force Apple WIFI network address to another address.  All that happened was the address of device updated on the list of EA3500 devices, but LAN and WIFI addresses remain together in the same device name and MAC OS on the list of devices.

  I have the latest firmware downloaded on my EA3500.  It wasn't a question previously when I ran the old firmware.

  Here is one that I see in the list display the LAN address for the address of Dell and WIFI for Apple on the same devices screen.  When I turn off a device, the respective entry goes.  Only when both computers are turned off reflects the unique device entry on the EA3500 offline.

  Details of the device:

  Name: Macbook Pro laptop

  Manufacturer: Apple

  Model: MacBook

  OPERATING SYSTEM: OS X

  IP (LAN)-1: 10.0.121.119

  MAC address: XX (does not list address voluntarily)

  -2 (wireless) IP address: 10.0.121.109

  MAC address: XX (does not list address voluntarily)

  I couldn't get the a screenshot as assignment would fail.

  This is a bug that comes and goes. Personally, I didn't for a while. But it's still there (even with the latest firmware)... If you catch this bug, it is usually difficult to shake because it can resurface. It affects too EA4500.

  There is no real rhyme or reason why it appears.

  http://community.Linksys.com/T5/wireless-routers/EA6500-multiple-devices-under-one-device/TD-p/57231...

• Bug in the latest firmware of phone spa3XX-5XXG 7.5.6 - cannot transfer anonymous calls

  Hi supports,

  I found a bug in the latest firmware of the phone 7.5.6.

  Platform:

  Linux Debian Wheezy

  Asterisk 11.7

  2.11 FreePBX

  Cisco phone model affected: SPA504G and SPA514G (I only tested these two models)

  The question is when there is an incoming call with the anonymous caller id, after picking up the call, xfer and bxfer softkeys are missing. On the first page, only conf softkey (3rd place on four soft keys). After pressing the arrow to the right, it's the recomposition, dir, virgins (previously bxfer) and DND.

  TS has been done.

  Tested with other brands of phones, yealink, snom and mitel, all workers.

  Tested with firmware 7.5.5b, all workers.

  Tested with the latest firmware 7.5.6, softkeys xfer and bxfer are missing.

  I read the note to upgrade from 7.5.6 firmware and below:

  CSCuh25063 The SPA5x5 phone has the ability to hide the softKeys Xfer/Bxfer after the initial configuration of the network.

  Maybe it's related? pure conjecture. Does this mean that we should have the ability to display the softkeys Xfer/Bxfer? HOW?

  I want to solve this problem as soon as possible. My clients are happy after demotion to the 7.5.5b. But if it can be fixed in the next firmware available, that would be great.

  Kind regards

  William Jin

  Hello Ryan,

  Firmware 7.5.7 is scheduled for late February 2015. If anyone needs an immediate fix for this issue, we have a special genius which is based on 7.5.6a.

  Thank you

  Shilpa

• I installed my Canon PIXMA MP600 with the latest drivers from the Canon Website, but the printer doesn't scan.

  I installed my Canon PIXMA MP600 with the latest drivers from the Canon Website, but the printer doesn't scan.  It prints very well I can't scan and save.

  I can't find the printer drivers specifically for Yosemite on the Canon website.  How can I get this analysis and save them?  I have never installed this printer on my iMac.

  Have you tried the Applications/Image Capture or VueScan?

  VueScan

  VueScan FAQ

• Citizen CT-S300 ticket installed with the latest printer driver, but do not print.

  Nice day

  New Dell with Windows 7 Home Premium workstation.  Installed in 4 other printers (this workstation is used in our shipping office) without any problem, they all work.  Installed the Citizen CT-S300 with the latest driver (64-bit) of citizen.  The printer has been successfully installed, but will not print anything.  I can see all the jobs in the queue, the printer is not out of line.  I uninstalled and reinstalled the printer several times.  Convenience store of Ran, no help.

  Really confused with this one.  This printer worked fine on another win 7 Pro workstation and laptop Win 7 Home Premium.  Cannot transfer the settings from the printer to my computer because Home Premium doesn't have the printer like Win 7 Pro Management snap-in.

  Any help would be greatly appreciated - thanks in advance for your time!

  -Rose

  RT

  Your best bet is to contact the citizen as they know that their best products.

• I installed the free trial version of lightroom. For some reason, the develop module is just a blue screen. I tried to uninstall and reinstall. I have a new computer with the latest version of windows etc.

  I installed the free trial version of lightroom. For some reason, the develop module is just a blue screen. I tried to uninstall and reinstall. I have a new computer with the latest version of windows etc.

  Go in Edition > Preferences > Performance and uncheck CPU graph use.

• I installed Muse (no testversion) with the creative application of cloud, but this isn't the latest version

  I installed Muse (no testversion) with the creative application of cloud, but this isn't the latest version (it's v7.4). I already uninstalled and installed from Muse and creative cloud App, but it is not always the latest version. Anyone know what to do?

  Hello Larnoa,

  You are on a 32-bit system?

  Latest version of muse needs a 64-bit computer. Please see the system requirements, the link described.

  https://helpx.Adobe.com/Muse/system-requirements.html

  7.4 muse's version the most recent can be installed on a 32-bit computer.

  Kind regards

  Vivek

• Where can I get the latest Firmware UJ - 822S for Portege S100?

  I'm looking for the latest firmware for this drive. The drive came with the Portege, and I know that they are specific OEM. There are later versions of the firmware available on other sites of manufacturers, but these will be simply screwed to the drive. I'M NOT AFTER RPC-1 firmware, just the last available if possible.

  Thanks in advance,

  PoB0782

  Hello

  Is there a special reason why you want to install new firmware, maybe some problems burning?

  I put t know where you can find the latest firmware for this phone, but if you Google a bit you will find many forums, such as http://forum.rpc1.org/.

  You will find useful information and comments about the firmware and the results. I just want to say that you should be careful about this. I put t know how old your unit and if the warranty is still valid, but please note that, after the installation of the firmware non-Toshiba, warranty for ODD will be lost. In the case of the STRANGE is defective it is not replaced.

• Sansa C250 v2 (01.01.05P). microSDHC? update to the latest firmware? Linux questions.

  People of greetings,

  just got my refurbished Sansa C250 2 GB. Back to v2. Parameters a 01.01.05P for the version number.

  I read somewhere on these forums that even if v2's back, it does not mean necessarily that the player is actually v2. Is this true? How can I tell what version it is?

  So should I upgrade to the latest firmware and which?

  I plan to buy either a 4 or 8 GB card microSDHC. Advice please.

  Anyone who has used linux to update firmware and for all other operations or would I have to use windows?

  Thank you

  Prasad

  Well, since nobody answered my questions, I will answer them myself.

  As has been said on this forum and others (http://www.anythingbutipod.com/forum/showthread.php?t=24680), this is the version of the firmware that you use to know the version of your player. Mine is v1. I think another, or should I say a sure way would try to penetrate into the first partition (or the partition to install the firmware) - If your drive is v1, it would be to put your player mode waiting (moved to the rec and orange shows on the left button) press and hold the rec button and plug it into a computer should appear the partition of 16 MB. V2 has a different key sequence.

  Since it is highly recommended to upgrade to the latest firmware, I upgraded to 01.01.00P which, by version number appears a downgrade, but it is what is here to... He did bring back the USB menu however.

  Since then, I could install Rockbox (http://forums.sandisk.com/sansa/board/message?board.id=c200&thread.id=3396), I'll go ahead and buy a 8 GB microSDHC card. Will post here when I get it to let you know if it worked or not. I think that should be. This post helped me decide to go ahead and buy it: http://www.anythingbutipod.com/forum/showthread.php?t=35302.

  I used two Fedora-7 and live CD Fedora-9 (on USB) - no problem.

  just something I did - I took a return of my entire 2 GB (after formatting the partition of 2 GB to get rid pictures and music that came on the player). used dd if = / dev/sdc. gzip - c > sansaC250. Also saved the first (16 MB) partition dd if = / dev/sdc1. gzip - c > sansaC250part1. I just thought I might be able to use it if I bricked my drive when rockboxing it. I don't know if restore partitions (or the entire disk) is unbrick it at all. Happy had to use it.

  Take advantage of...

• Don't I have the latest Firmware for WRT110?

  I just bought and installed the WRT110 and I was wondering if I have the latest firmware. I show the version 1.0.04)is build 10 in routers administration page.

  Also, I would like to know if I have security measures in place for my network. I am 'new' for wireless routers, but I used a wired Linksys router with two computers on the network. Now my wife has added his MacBook to the mix, so I thought I would try a wireless router. The other two systems will remain wired for now.

  So far I have:

  Compatible WPA - 2

  SPI enabled

  NAT enabled

  MAC enabled filtering and only authorized wireless computers MAC address

  Changed default SSID

  Default password changed

  What else should I consider for this set - up?

  Thank you

  Paul

  You should not loacte the router near the LCD monitor also or other computer equipment or speakers...

  To disable the SSID broadcast-

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...
  Click the Wireless tab, select Disable SSID broadcast...

  Disabling the SSID broadcast prevents your network to appear in the list of available wireless networks, but it is still present...

  Note that disabling SSID broadcast is one of the many techniques of tightening of security on a Wi - Fi network. This technique is not 100% effective, because hackers can still detect the SSID sniffing different messages in the Wi - Fi Protocol. Yet, using techniques as the disable broadcast SSID makes it more likely that any intruder it will move your home network who seek easier targets elsewhere.

• Can customers rebuild an Exadata machine with the latest versions of battery?

  There is a possibility that we will be buying two new Exadata (X 3) machinery in the near future. I get very happy if I wasn't already completely flooded :)
  
  If this happens, we are going to ask Oracle to install the last and the largest battery software when they arrive on-site with our new toys. Currently, this means:
  
  < i > OEL: 5,7 (with the latest kernel)
  SSE: 11.2.3.2.1 (CF-writing, mmmmm!)
  RDBMS/IM: 11.2.0.3.17 < /i >
  
  Our current Production database is on a machine V2 and the following versions of the stack:
  
  < i > OEL 5.5
  ESS 11.2.2.3.2
  RDBMS/IM 11.2.0.2 BP7 < /i >
  
  We hope, once the dust settles, we can redirect our existing V2 machine as the development environment. However, in order for this to be of any usefulness, we need the software stack to match which will run in Production on the X3s.
  
  As far as I understand, the upgrade path is as follows (according to 888828.1)
  
  < i > improve the o/s to 5.7 OEL and the latest kernel on the storage cells and model nodes
  Update the firmware of the switch of IB to 1.3.3 - 2 (which we already have)
  Update the Exadata Storage Server on the storage cells and nodes of the model at 11.2.3.2.1
  Install the 11.2.0.3.17 IM and RDBMS binaries
  Upgrade ASM 11.2.0.2 to 11.2.0.3.17
  Install the binary RDBMS 11.2.0.3.17
  Development of brand/move/restore/copy on the new-updated V2 machine. < /i >
  
  I wonder whether it is better for us to upgrade the machine V2 our current versions of the stack in later or whether it is better to try a reconstruction?
  
  As long as customer, are we able to rebuild the stack ourselves with the new software, or do we have Oracle come and go in their installation process (we put a different version of the battery on that we currently have)?
  
  Mark

  Hi Mark,

  We need to upgrade the operating system (5.5 to 5.7)

  The operating system on Exadata is not a standard iso image used on another server or virtual machine.
  (It will be clearer if you read the bare metal restore the steps below)

  Relocation-by-yourself method is "approved" by Oracle?

  Support, it is.
  For example: If you lose a db node you can rebuild it image by the method "reinstall-by-yourself."
  Discover DocID 1084360.1 Bare Metal Restore procedure to compute nodes on an Exadata environment.
  It is BTW a good starting point to understand a complete regeneration.

  they would respond to a SR or they tell me contact ACS instead of worrying of their?

  I didn't need them to reinstall so I can't say how they would react in this situation.
  In general, they are ready to help.
  Kind regards
  Tycho

• My appleTV 2 see no room for my computer. WIndow 7. ATT Uverse router 5031NV-030 firmware10.5.1.525917 - att. I have the latest firmware on everything. I tried turning point/disable ipV6, run as administrator, disable firewall... .etc

  My appleTV 2 see no room for my computer. WIndow 7. ATT Uverse router 5031NV-030 firmware10.5.1.525917 - att. I have the latest firmware on everything. I tried turning point/disable ipV6, run as administrator, disable firewall... etc I tried everything. He used to work on Window Vista and a few old iTunes. I've updated to iTune and move to Uverse. It has stopped working. I thought the problem was iTunes so I've updated to the latest version of iTunes in Vista, then update to Vista and then install Windows 7 and then last iTune on Windows 7... I now have everything that the most recent and it still does not work. I have not the firmware on my router can be updated, but I think it's fairly new

  There may be a setting on your router you can disable IPv6.  Try this and also disable IPv6 on your NIC again.