Similar Questions

• Since Apple ridiculously decided to abandon the center of games tab of my friends in the game does not load automatically and I have to go to GC and click the circle of friends so he could load, MORE I wonder constantly if I want to use my game stored loc

  Since Apple decided to abandon the center of games tab of my friends in the game does not load automatically and I have to go to GC icon and tap the circle of friends so he could load several times, MORE we continue to request if I want to use my game stored locally or my stored GC game. I refuse to install iOS 10, because it means of course I won't be able to manually load the tab my friends and my losing my game completely. How can I fix it? Remove the Center game is the worst thing that Apple could have done, in my humble OPINION.

  You will not lose your game entirely. I have several games of game Center, and they work fine. And I understand the developer of a game that this game center continues to store the backup of your game.

  It's just that now friending is handled via the interface of the game. The only options that you have in iOS10 is to go to the settings panel in / log out of game center or remove all friends. And none of the games I play has updated so I can see how their friending works with iOS10.

  Beyond providing the basic interface, Apple seems to have turned all aspects of the social game on the games themselves.

  If you want to make Apple know how you feel, you can leave your comments via this form

  http://www.Apple.com/feedback/

• The CSSD does not start automatically on the Non-RAC - AIX 5 L

  Hi all
  
  Database: Oracle 10.2.0.4
  AIX 5.3 TL 10 OS
  
  I am facing a problem with the Non-RAC/Clusterware CSSD.
  
  When we restarted the CSSD service server does not start automatically, and there is no relevant messages in the log files of the CSSD.
  
  Run 'localconfig reset $ORACLE_HOME', to run but does not start the CSSD.
  
  Running 'start /etc/init.cssd' - does not work, nothing happens when you throw
  
  I manually ran "file/etc / init.cssd to run" and the start of the CSSD (ossd.bin) service without errors.
  
  No error on errpt in AIX.
  
  I opened a SR, but I'm waiting for response from the Oracle.

  Hello

  I think that this problem is not with Oracle, but in AIX.

  It may be that a process that starts at the start is the other process. You need to identify what application/process.

  Check the process in inittab who are already active and which are inactive, they must be active.

  A clue: is very common process that is launched in standby mode keep the boot server.

  wait
  When the init command enters the run level that matches the entry's run level,
  start the process and wait for its termination.
  All subsequent reads of the /etc/inittab file while the init
  command is in the same run level will cause the init command to ignore this entry.
  

  http://publib.Boulder.IBM.com/InfoCenter/AIX/V6R1/index.jsp?topic=/com.IBM.AIX.files/doc/aixfiles/inittab.htm

  Kind regards
  Levi Pereira

• When the perforation in the logic does not record pre

  Using logic 10.2.4

  I have implemented punch and punch the locators.  I play with the track and making punch.  Logic doesn't store any roll before... .in other words if I try to expand the newly created region a little more early to catch a truck or something thing I got at the beginning, nothing is there.  I know logic is supposed to check in at the beginning just in case... there at - it a setting I'm missing? I tried the pre roll record and set at 6 seconds, but still nothing at start is saved before punch to the point.  Same thing in lieu or in creating records of decision-making.

  

  The count and record Pre Roll above are mutually exclusive. They do not define how at the beginning of the recording begins, but rather where the playhead is set before the start of the recording. If you have a 2 count together bar and position the playhead at 10 bar, and then tap Save. Logic moves the playhead at bar 8, start playback (if there is something to play) and begin to check in at 10 bar. If you select a period of prefetching in a few seconds, the playhead will jump back 6 seconds instead of bars. Neither defines the amount of pre-roll advertising in the in the recorded real audio.

  Auto Punch in is exactly that. When the recording start / stop. There is no registered pre-roll advertising. If you want the extra recording time before or after, then stretch the autopunch bar to make room for the start of start or end at the end.

  You can also use take folders that might be a suitable replacement and allowing campers of any part you want.

  Exception to this rule the there is one and will achieve exactly what you want - but it does not work with automatic punch. It is the punch on the fly...

  prerequisites - you must have "quick fist blow" activated.

  Press play and internally logical starts recording the moment where you press play, when you're ready to punch in, press R and you start recording, when finished, press stop. Logic recorded a region between the points where you started recording and click on stop. However, logic actually starts recording (under the hood) from the moment where you supported the play button, so if you look in the project tree, you can see the entire audio region with only set it collecting points as the region.

  It's only this case that allows you to develop the region in time to include a part any audio region that was "pre" set registration points. It is in fact will contain the entire audio file as soon as the room was pressed to stop, even with quick punch point defined further in the song.

  So say you have 10 bars - you start reading at the bar 1 and 5 bar you quick punch in bar 7 and you punch out. The defined region will show 5-7 bars, however if you develop the starting point of audio regions to the left - you will find that you have saved in fact all the way back to bar 1.

  Sorry, this feature is not available if the autopunch is the method of choice.

• structure of the event does not record local vars

  I have a gif of a FPGA based topology I want to show some telesignalisations in.  As the user clicks on the Boolean, vertical lines appear and disappear as they click on it again, showing the current topology of closure.

  To save resources, I opted to use a structure of the event.  So far I put it for internal RX_FAC and RX_TERMXCO4AU you see at the top left of the image.

  A single loop of RX and one TX closure may be on at the time, so one of the first things that happens when the user clicks on the Boolean value is that it defines the values of all other Boolean in the same row of fake, thanks to the use of local variables.

  The problem is - the structure of the event runs only when the user actually clicks the Boolean true or false value, but not if the boolean is false through the use of a local var.  In other words, let's say I RX_TERMXCO4AU true and false RX_FAC.  If I click on RX_FAC to set it's true, then you will notice RX_TERMXCO4AU goes dark/false and RX_FAC lights.  So the value of RX_TERMXCO4AU has changed, but associated with the structure of the event RX_TERMXCO4AU does not run (that's why the vertical line between RX_TERMXCO4AU and TX_FACXCO4AU remains).

  This will make a lot more sense if you run the attached simple VI.  Right now, events exist for RX_FAC and RX_TERMXCO4AU, but it is sufficient to explain the problem I think.

  Any help is appreciated.

  The structure of the event is for events generated by users.  Writing to a local variable is a programmatic change.

  You want to do is write your value to the Value property (Signalling) of the Boolean that will change the value and raise the value change event.

• Windows 8 - horizontal scroll on the mouse does not

  Hello, everyone,

  I have a system running 64-bit Windows 8. My Gigabyte M6980 mouse has a wheel tilt with a capacity to reach not only up and down but also left and right. However, the inclination of the wheel does not record in my Win8 machine.

  I plugged the mouse on a Vista laptop where initially the system has not yet recognized the mouse at all (the cursor is not mobile). After going to the Manager of devices and update the driver for the "unknown device" which was M6980, it became a "HID-compatible mouse. I could then move the cursor AND use the horizontal scrolling. On a Windows 7 computer, the mouse was recognized immediately and I could use horizontal scrolling very well.

  I tried to copy mouclass.sys of my laptop Vista and mouhid.sys to C:/Windows/System32/drivers on my machine Windows 8, but then the mouse could not be recognized at all the original files should be restored. The same thing happened when I copied the same files from a Windows 7 machine.

  Gigabyte support response is that the mouse does not officially support Windows 8 and all the features are not guaranteed. There are no drivers available for the device and the only software that comes with it is motor Ghost of Gigabyte for remapping keys. But given that horizontal scrolling works in Windows 7 without any additional software, I suspect driver Windows 8 HID is involved, although I could well be wrong. I couldn't Google solutions. Any help would be appreciated.

  See you soon,.
  Jesse

  Hi ShiuabKhan,

  Thanks for a quick reply. Windows 8 is now picking up the thin horizontal scrolling messages. I tried to randomly check the software option Gigabyte 'disable horizontal scrolling' and apply changes and then uncheck the new, and, curiously, it started working. However, I install the latest version of the software from Gigabyte (which just happened to be released February 1) in compatibility mode to be on the safe side.

  Although the system is now picking up messages from horizontal scrolling of the mouse, my Battlefield 3 game won't recognize them, but is not a Windows problem, so I'll find an answer elsewhere.

  Thank you much for the help!

  See you soon,.
  Jesse

• Listener (and the database instance) does not start automatically: ORA-12514: TNS:listener does not currently of service requested in connect descriptor

  Hi all... I am a newbie with oracle database.,.

  I have the problem of monitoring:

  I installed Oracle Database 11 g R2 XE on my CentOS 6.5 guest operating system.

  I changed the host name in my CentOS so (where installed oracle 11g R2 XE) after the installation was completed successfully.

  Installation-) before and during the hostname is localhost.

  (-) After the installation, I changed the host name in VMCentOS

  From the moment where I changed the host name, nothing starts automatically. In particular, the listener and the database instance does not start automatically.

  When I start the listener manually and I try to connect to the instance of database with SQLPLUS I get this error:

  ORA-12514: TNS:listener is not currently of service requested in connect descriptor

  I think that the problem is due host name changed because I have to test and debug the object, re-installed a machine virtual operating system CentOS, re-installed oracle database 11 g and I do not have this problem. The database instance and the listener starts automatically!

  Can someone tell me if, maybe, the problem is with the host has changed? ... and why?

  P.S.: After changing the hostname I also modified the listener.ora and the tnsnames.ora by changing the HOST with the correct host name.

  Hello

  It seems that you don't install Oracle Database Express Edition (XE). If you post this question in the wrong forum.

  When you install EA or there is no script that starts the database at startup.

  If you wish, you can create by yourself. For example search for instructions to Google how to create script.

  Kind regards

  Jari

• While the loop does not stop when the two values are equal using equal to comparitor

  Hello world

  I have a really, really strange bug. I have a LabVIEW VI that change a chain on a power supply. I have a start and a stop voltage and use a while loop to increment the device. For example if I want to scan from 1, 2V to 2.2 V in 0.2 V incremements, the program will end when "The current tension" = "stop the tension." And it works very well!

  However, when I start - 3 V and want to stop to say-0.8 (new in 0.2 V incremements) the program does not stop when "The current tension" = "stop the tension." I checked with the probe close to what should be the end of the race and - 0.8 V goes both of the entries ' equal to ' comaprison operator, but that his can't trigger a real result.

  It's very strange for me. Espeically as if I'm going - 0.8 V to-2 V but decrement of-0.2 V, the program stops correctly!

  I am very confused!

  See you soon!

  Search on: comparison of floating-point numbers

  The second thread is particularly relevant. This discussion was 2009, but you can find that the same "bug" being reported to enter the end of the 1980s.

  Mike...

• To install the server does not, after a Preparig to install the window hung for several minutes

  Hi, I tried to install memeo backup of a product for a moment, I recentley purchased. I know that the software and the product is not damaged, because I am able to install it on other computers. Its my fault see tho, I have the seagate FreeAgent GoFlex 1 TB external hard drive, and I had planned to use it on several computers. sort of, I installed it on my computer windows 7 without probs., but when I was installing on my windows vista computer, I accidentally unplugged the drive when installing memeo instant upward.  Needless to say, I knew this would be a problem. Windows popped up saying that the dashboard Seagate (which is the program that installs Memeo instant backup) have not installed properly, so I clicked on reinstall this program with the recommended settings, and I handed the drive and started the installation again. When I did, the registration page (for the unit I was using) pops up and froze, so I closed its process, then Setup of the Board of Directors of Seagate Dash appeared and I started to install, and when he rose to installation of the snapshot of Memeo back, it opens a "Preparing to install" window of a windows installer and after about 10-15 minutes , another windows installer window comes up saying ' to install the server does not.

  Ive done my time just trying to solve this problem and believe he made an incomplete registry file, it whenever it tries to install it tries to use the incomplete record. If one has found a solution to this, or knows what that means of ' installation server does not ", it would be very appreciated for your advice.    If you want to know my characteristics. they are {windows vista 32-bit home Basic, sp 2, 3 GB of ram, 2.10 ghz processor}

  Hello

  you are in the wrong forum

  It comes to the installation of vista operating system instance

  Why don't contact you the program manufacturer?

  Try the repair and recovery forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system?page=1&tab=all

• After showing the keyboard does not work protected void paint (Graphics graphics)

  Hello

  I am facing a big problem. Need your help.

  I've implemented TouchEvent and VerticalFieldManager-> screen paint().

  TouchEvent works well. But the paint method is confusing after the virtual keyboard is displayed.

  My code is as follows:

  public MyScreen extends MainScreen {
  
      private VerticalFieldManager vfm = null;
  
      public MyScreen() {         super(MainScreen.NO_VERTICAL_SCROLL);         vfm = new VerticalFieldManager(Manager.USE_ALL_HEIGHT | Manager.USE_ALL_WIDTH){              protected void paint(Graphics graphics) {                   //paint methods              }         };    }
  
       protected boolean touchEvent(TouchEvent event) {         if(!event.isValid()) {        return false;   }         if(//Check touch conditon) {               //Do something               return true;         } else {               return super.touchEvent(event);         }     }}
  

  You can correct code above?

  This method of paint does not work after showing the keyboard.

  Thanks in advance.

  Thanks for your reply. Guy.

  I found my bug. This problem is related new instance in my code.

  If the keyboard does not at the present time, it seems that the screen height is decreased by the height of the virtual keyboard. It must be calculated in your code.

• Problem of USB ports: remove the material does not work. It works on different computers for the same USB devices

  Original title: problem of USB ports:

  I have a computer dell laptop inspiron d1420 provided with Windows vista and I have upgraded to Windows 7 ultimate, I noticed that when I plug in a USB mass storage, when I try to remove it, I don't get the safe delete the message and lately when I try to remove it, I keep getting the message He's busy and I can't remove it. I tried the same USB on another PC and I have no problem at all. I connected a printer, USB cable and wondows llok have not the driver or didn't install the printer, he left as a device not specified with the name of the printer, but I can't print. I tried with another PC that is also running Windows 7 ultimate and I have no problem, windows has installed the driver, because I used the same printer and the same cable. What is the problem with my USB 4 ports and how to fix?

  Hello

  When you get this message while trying to remove a USB, it's basically a lock for this USB device by some process running on the computer. If we know which process is this locking mechanism, we could also find which Service is associated with this problem in the computer.

  To check this, you can use a program called Process Explorer. You can download this program from the following link. Once downloaded, extract the contents of the zip downloaded to a folder on your desktop. Inside this folder, you will see a file by the name of procexp , which is the executable for Process Explorer. The download link is:

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

  First, plug the USB to one of the USB ports. Then, once you have the executable to Process Explorer, right-click on it and then click run as administrator. Please allow all guests UAC can occur. Once the Process Explorer is running, please follow these steps to search for processes using the USB at the moment:

  1. click on Searchand then click on manage to find them or DLL on the options menu at the top.

  2. then in the pop - up which will turn up next, type the drive letter for the USB drive connected to the computer (for example G: or H:) right now and click on Search.

  3. he should then display all instances of the process that is using this USB at the moment with the corresponding process ID (PID).

  Now, once you have the names of processes using the USB at this time, you can terminate them by clicking on them and then clicking on Manage close. Once this is done, you should be able to eject the USB safely.

  I would like to ask the names of processes lock the drive in your computer. This should give us an idea of what we might have to take the next.

  In addition, for the other issue that you mentioned, in which the computer does not automatically and correctly detects the printer when it is connected to the computer, I suggest you to check whether or not your computer Plug-and-Play service is set to automatic. Here's how you can do this:

  1. press the Windows and the R on your keyboard to get to the top of the run box.

  2. type Services.msc in the run box and press enter on the keyboard. Allow all UAC prompts that may coming up next.

  3. once it opens the window of the Services for you, scroll down to the Plug-and-Play service and double-click it.

  4. in the properties box that will come next, the Startup type should be set to Auto and the Status of the Service must be started. If this isn't the case, please put these values.

  5. click on apply then OK, close all windows in the computer and restart the computer once.

  Once these steps was performed, please check if the problem remains the same. We know the results.

  I hope that these steps raises you in the right direction in order to solve this problem. Don't answer if you still need assistance, we will be happy to be of assistance.

• 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

  13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• iPhone 5: objective of the camera does not work after update iOS 10

  Hello everyone.

  I swear to you that I have no idea how do... after a few weeks since the release of iOS 10, yesterday I force myself to be updated - the situation with iOS 9.3.2 became crash and unbearable lag every second. The fact is that I update, I like the system and use it for a few hours. Check the camera this morning, I see that the focus does not work. Now I also see AE / AF Lock, light changes whenever I tap on one side or the other, but not to focus. Not even close or far, nothing to do. I have not tried in the settings to do a full erase, I had no way to restore it since I do not have a backup.

  I tried to clean the lens - already cleaned, I tried to give him a few small nicks and follow the many guides online. I rebooted and everything done. Nothing has changed.

  The last photo was taken last night and has been developed. So I don't think it's a hardware problem and if so, how has it happened? A few hours ago the iPhone is fallen, but tell me if it makes sense. If it's a software problem, what could I do?

  I would avoid the assistance. It is a used iPhone, never jailbroken. I don't have a lot of confidence with the help, in 6 or 7 years he never went - iPhone always bought used and always worked very well.

  PS: I have no way to get into DFU, as iTunes does not see my iPhone. Up to iOS 9 that I had no problem even if I had enough of the device with the cable isn't original, but barely now lets load ("This accessory may not work").

  Hello

  I also have an iPhone 5 and I tested the question and mine is fine, how bad was the fall that you mentioned? Sometimes problems can come and go. Also try to reformulate your device.

  After this answer please.

  Thank you Will

• having an iphone 6.  The ringtone does not make a noise.   I tested the ringtone and it sounds however when I receive a call or text or email, the Bell is silent

  I have an iphone 6.  The ringtone does not make a noise.   I tested the ringtone and it sounds however when I receive a call or text or email, the Bell is silent

  Hello Jimmy10 66,

  Thank you for reaching out to the Community Support from Apple. I know how it is important to follow your alerts, and I want to help you get your work again.

  Before we get too far, it's always a good idea to check that your 'secret' button just above your volume controls is not engaged. If you see that the yellow indicator go ahead and switch to the other position to turn it off.

  Alternatively, you can drag up from the bottom of the screen and make sure that the control of "do not disturb" is disabled.

  If those who are for the time off, go ahead and restart your phone and retest alerts. If the behaviour continues or if you encounter any problems, please reach out again and let the community know what other steps you have tried. The entire community is here to help.

  Best regards

• Fast forward on the videos does not work on tvos 10

  Hello

  After updating to the latest tvos, 10, fast forward on the videos does not work. I can only fast forward when I press on the right place on the pavement and fast forward 10 seconds in time.

  Someone else has the same problem? Is this a bug in update?

  Hello. It seems to work as described here https://help.apple.com/appletv/#/atvb7944597f press next to move to 10 sec, press and hold to fast forward. They have it changed again?