Instances impossible to log into the ASM instance RAC & ASM low-

Similar Questions

• Impossible to log into Admin and will not be able to edit my site.

  Hi all

  I try to log into the Admin Panel, but get the following error.

  ERROR: This site is not available because it no longer exists or has unpaid bills [3 ERROR].

  

  Please let me how can I connect and edit my existing site?

  Thank you and best regards,

  Rakesh Pandey

  Rakesh,

  site has expired. I send a few step via personal message, please follow and we will do the necessary.

• When my Captivate project is published on my LMS, course opens a new window.  You are able to copy the URL of this window and access the course without logging into the LMS.  How can I avoid this?

  When my Captivate project is published on my LMS, course opens a new window.  You are able to copy the URL of this window and access the course without logging into the LMS.  How can I avoid this?

  Return to your LMS administrator and ask them why they have not put in place more firmly. The scenario you mention should not occur if the LMS is well attached.

  Some LMS have the contents of the course are in a folder outside the web space so that users can access the course URL directly.  For example, Moodle t - it this way and then shot the course content in a temporary folder when the learner clicks on the link ask a module.  No matter how your LMS is supposed to do, it is currently not configured correctly.

• PLS HELP blackBerry smartphones * IMPOSSIBLE TO LOG INTO BLACKBERRY ID ACCOUNT *.

  Hello I have a bold 9900 buddies. For about a week I could not access my blackberry ID account. It keeps saying 'IMPOSSIBLE to LOG IN YOUR BLACKBERRY ID ACCOUNT' suggestions please?

  I found another forum where they asked to save, reset and restore. He solved the problem. Thank you guys

• A standard user to log into the account has been deleted. How can I recover it?

  Connect user account deleted

  In an effort to remove a viral program, a standard user file was accidentally deleted. Now my grandson is unable to open a session. Administrator accounts are not affected. Only the standard user account.  How can I get the file back. No, this isn't in the trash

  I don't know if you understand. Miss him not the account, just the file system which allows me to log into it.  Administrators can connect but not standards users - the standard, same new.

  You don't say what happens when a newly created user cannot connect.
  If a newly created user cannot connect even when typing the password (which should be easy to test, for example 123456) then your accounts database is damaged. By using the restoration of the system to a point when new accounts still worked would solve the problem.

• Re: Satellite C850D - impossible to get into the BIOS

  I'm unable to access the BIOS on this machine. I tried (a number of times) by pressing the FN and F2 and FN and F12 keys while the Toshiba logo is displayed. Unlike the Satellite A500, I have, no prompt for keys F2 or F12 doesn't appear at the bottom of the screen showing the Toshiba logo.

  I tried F2 and F12 keys without the FN key, but still no result.

  I need to be able to boot from the CD drive, but cannot get the BIOS to add this record to the boot sequence.

  Help pls.

  Rod.

  If you use Win8 you must make full stop at first. How to do that you can read on http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
  After the full stop restart your machine and press F12 to get into the boot menu. There, you can choose which device can be used as first boot device.

• 8.3 OMSA @ ESXi 6.0 U2 @ R515-> cannot log into the website OMSA to ESXi HOST.--

  Hello guys.

  I've updated my ESXi of U3 5.0 to 6.0 U2 and I lost my OMSA. I can not connect from the web page.

  For the update of the host, I used this ISO file:
  . VMware-VMvisor-Installer-6.0.0.update02-3620759.x86_64-Dell_Customized-A00.iso

  After that, I installed OM-SrvAdmin-Dell-Web-WINX64-8.3.0-1908_A00. EXE to a VM W2012S to this host. I can open the web site to connect, but when I try to connect to my ESXi HOST, I received this message: failed to connect... connection error.

  When I saw that I began to check a few things, I ran: 'list of vib software esxcli' and I saw:
  Name Version Date seller installation acceptance level
  ----------------------------- ----------------------------------- ------ ---------------- ------------
  ...
  OpenManage 8.3.0.ESXi600-0000 Dell PartnerSupported 2016-07-29
  Reference Dell-configuration-vib 6.0 - 2A 00 Dell PartnerSupported 2016-07-29
  iSM 2.3.0.ESXi600 - 0000 Dell PartnerSupported 2016-07-29
  ...

  Another very strange for me, is that I can't see any reading of the sensors to Interface web server: HOST /... / or Vsphere Client.
  But I can read a large number of web page Idrac and ESXi SSH data using ' esxcli ipmi sdr list material.
  Node-sensor Description-reading raw reading of raw Timestamp/comment base calculated entity Instance
  ----------- --------------------------------- --------------- ---------------- ----------- ----------- ------------------- ---
  0.1 1 Temp 3.1 processor 38 degrees C 166 2016-08 - 01 T 14: 18:32
  0.2 2 Temp 3.2 processor 34 degrees C 162 2016-08 - 01 T 14: 18:32
  0.5 power 1 10.1 Temp 40 degrees C 168 2016-08 - 01 T 14: 18:32
  0.6 power 2 Temp 10.2 37 degrees C 165 2016-08 - 01 T 14: 18:32
  0.7 power Supply 2 Temp ambient 10.2 26 degrees C 154 2016-08 - 01 T 14: 18:32
  0.8 power Supply 2 Temp ambient 10.2 28 degrees C 156 2016-08 - 01 T 14: 18:32
  0.12 system Board 1 BIO Temp 7.1 44 degrees C 172 2016 - 08-01 T 14: 18:32
  0.14 front Panel Board 1 Temp ambient 12.1 16 degrees C 144 2016-08 - 01 T 14: 18:32
  0.13 system Board 1 Temp Planar 7.1 28 degrees C 156 2016-08 - 01 T 14: 18:32
  0.10 memory Module 1 Temp 8.1 24 degrees C 152 2016-08 - 01 T 14: 18:32
  0.11 memory Module 2 Temp 8.2 36 degrees C 164 2016-08 - 01 T 14: 18:32
  System of 0.48 to edge 1 FAN MOD 1A RPM 7.1 2760 RPM 23 2016-08 - 01 T 14: 18:32
  System to 0.49 to edge 1 FAN 1 b MOD RPM 7.1 0 RPM 0-2016 - 08-01 T 14: 18:32
  System of 0.50 to edge 1 FAN 2 a MOD RPM 7.1 2760 RPM 23 2016-08 - 01 T 14: 18:32
  System of 0.51 to edge 1 FAN 2 b MOD RPM 7.1 0 RPM 0-2016 - 08-01 T 14: 18:32
  System of 0.52 to edge 1 FAN MOD 3A RPM 7.1 2760 RPM 23 2016-08 - 01 T 14: 18:32
  System of 0.53 to edge 1 FAN 3 b MOD RPM 7.1 0 RPM 0-2016 - 08-01 T 14: 18:32
  System of 0.54 to edge 1 FAN MOD 4A RPM 7.1 2760 RPM 23 2016-08 - 01 T 14: 18:32
  System of 0.55 to edge 1 FAN MOD 4 b RPM 7.1 0 RPM 0-2016 - 08-01 T 14: 18:32
  System of 0.56 to edge 1 FAN MOD 5A RPM 7.1 2760 RPM 23 2016-08 - 01 T 14: 18:32
  System of 0.57 to edge 1 FAN MOD 5 b RPM 7.1 0 RPM 0-2016 - 08-01 T 14: 18:32
  Power supply 0.148 1 1 current 10.1 0.6 amps 15 2016-08 - 01 T 14: 18:32
  Power 0,149 2 current 10.2 2 0.48 amps 12 2016-08 - 01 T 14: 18:32
  0.150 1 power supply 1 10.1 206 Volts 103 2016-08 - 01 T 14: 18:32
  0.151 power 2 2 10.2 206 Volts 103 2016-08 - 01 T 14: 18:32
  System of 0,152 onboard System 7.1 220 Watts 22 2016-08 - 01 T 14-1 level: 18:32

  The details of the server are:
  BIOS 2.3.0
  IDRAC 2.85 (Build 04)
  Lifecycle controller 1.7.5.4

  Any kind of help to connect to the host ESXi OMSA is welcome!

  This is the correct service.

• Don't remember password to log into the XP system

  The system could not log. Make sure your username and domain are correct, then type your password. I don't remember the password.
  * original title - error message appear *.

  Hello
  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the sticky below.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

  Thank you.

• Black screen after logging into the domain account

  OK, it's making me nutty and I don't know what to do.

  Configuration: SB Server 2008 running domain controller.  4 client machines connected, 2 XP, 2 running Vista Ultimate SP1.  XP machines work fine (of course).  Vista machines are in the tank.
  Two Vista machines are about 2 weeks with the only changes to the installation of the factory Office, Norton 360 and printer drivers.  Both machines exhibit the same symptoms at the same time:
  (1) after the restart, each machine running Vista for 10 minutes exactly, saying "Please wait...". "before the screen"press Control-Alt-Delete.  Safe Mode boot normally.  Examine the event log, I see entries on running a startup script of some kind that took 600 seconds (10 minutes).  This of course comes from the domain controller.  What is this and how do I get rid of him?
  (2) after finally journaling, tries to connect the domain account ("domain\username") result in a "Welcome" screen... ', followed by a black screen with a mouse cursor which is mobile.  It is a permanent condition.  I let the machine sit overnight and nothing changes.  I get an occasional popup on the black screen of Norton saying it runs background tasks and that's all, so I know the machines are running.  Pressing Ctrl-alt-delete is * not * bring up the Security screen.  It doesn't do anything.
  Note that connect to a * local * account ("machinename\name") works very well.  I have a desktop, icons, everything.  I even connected locally and made a "change user" to a domain account, and now the machine is stuck again to a black screen with mobile mouse.
  Both machines have worked very well for two weeks.  When I reboot safe mode and remove the computer domain, everything works well, probably because I'm just connect to a local account again.
  I did * no. * change to group policy.  The server works with all settings by default wrt updates, etc.  I did not have any mods system to customers other than to join them to the domain.
  I searched online, and I see other people have this problem, but I can't find a definitive solution.  I tried to restart by using the last known good configuration, but I think that the system is of the opinion that the last logon was successful, which is not good.  To return to the last restore Point is not good.  Both machines has stagnated at the same time, which implies a problem across the field.
  Please don't tell me that I have to spend $200 and one day online with technical support to get an answer to this.
  Thanks in advance for any help you can provide.
  -Rob
  2)

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Thank you for visiting the website of Microsoft Windows Vista Community.  The question you have posted is related to Small Business Server and would be better suited to the Small Business Server community.  Please visit the link below to find a community that will provide the support you want.

  SBS 2008

  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Server 2008 R2 giving BSOD and I am unable to log into the server

  I have Server HCL, that worked great for the past 2 years, all of a sudden it's a started giving some noise so I checked in a RAID and found a missing display the DB, I just google and then I went to the RAID Configuration, then reinsert that disc HARD once more in the same slot, then it started to show me also misconfigured so I fix it configured by the RAID BIOS WEB utility and then they replace missing PD and then make the drive HARD in line now, when I started the server I'm unable to log on to the server, its sends a BSOD and if if I'm not connect its absolutely perfect work... Please help its file server.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• How to get the user name of the user logged into the E-Business Suite in OFA

  Hi all
  
  I developed a few screens in OPS and recorded also in Oracle applications. I need to enter the user name of the user who has logged in to the E - Business Suite to access my Application OFA, so that depends on his user name I will post a welcome Message on my screen.
  
  Can someone please suggest how to achieve?
  
  With our thanks
  Gerber

  Use pagecontext.getuserId or pageContext.getUserName in your controller

  Thank you
  Kassy

• Impossible to paste into the e-mail after updating ios 10.0.1

  After 10 ios update cannot paste into emails on iphone 6, iphone 5 and ipad.

  Your Bluetooth is enabled on all devices? What happens when you try to paste, and you can stick other text?

• sometimes can not log into the server or very slow to make so.green bar downstairs is fully informed and he's there with the wheel spins as it tries to plug?

  Can't all the time. Many time running without problems. When problems seem not to be like that for a while as an e-mail message. Just did an email and wheel turn and try to send. "Cannot connect to Server" in my opinion, is what happens. Press Cancel, entered Envoy file to see if went thru (sometimes he does this when he says he did not send) not in the folder sent, has started the new email and redone and it sent fine?

  They told looks that the question of thunderbird and no provider?

  My sent file is small. Thought this might help then deleted more old that I did not move from customer records.

  If it does not work at the same time, but working again later, it is unlikely that the problem is with Thunderbird.

  You can try to disable email scanning in your antivirus software.

• All of a sudden I can't log into the site Web of Netflix with Firefox 14.01. I have no problem with Safari or Chrome (both are up to date).

  The only other recent change has been updated Adobe Flash yesterday. Everything is updated. I can use other browsers to get in my Netflix queue, but I prefer not. This has just begun. It's annoying, but I'm planning to upgrade my iMac to Mountain Lion and would like to have as many things working properly as possible. I'll let Netflix know also that the problem can be at their end.
  Thanks for any help you can give me.

  Try to empty the cache and delete cookies from this site. Also, make sure that you allow the site of dΘfinir of cookies.

• Satellite L750-1NG - impossible to get into the BIOS

  Hello team,

  I've recently updated my Toshiba BIOS of v3.0 to v3.6 and I am not currently able to access BIOS. I don't see a splash or the other screen. Except that my computer works very well. I have a Satellite L750-1NG and running Windows 7.

  Thanks in advance for you help. :)

  Post edited by: welika

  Hello

  Have you tried to press F2, immediately after the laptop was turned on?
  Press F2 repeatedly in the line.

  Otherwise I recommend starting the utility HWSetup from Toshiba. (All programs-> Toshiba-> Utilities-> HWsetup)
  Here you can change some settings of the BIOS like him setting the Standard (default).
  I think you'll need spend the quick start the normal start because you said that you can not see the Toshiba start screen.