Instant Messaging within the apple network

Similar Questions

• "Navto" command within the overlay network does not not in Windows

  We have exactly the same problem as in this thread, just for Windows: "Navto" command within the overlay network does not not in Android

  There is some code in an overlay of web which should "navto" one other article, if there is no interaction with the screen after a defined period of time.

  
  

  But unfortunately our folio of test does not work on Windows. There is an error message indicating that no application is defined for navto links. Shouldn't the Viewer for content Windows catch these links?
  

  I have confirmed with our engineers navto in the meta tag is not supported on Windows. It will work in a , or via window.location in JavaScript, but not in the meta tag.

  Neil

• Practically in segregation a virtual machine within the same network

  We have a VMware ESXi 5.0.0 (504890) host that has physically 4 network cards. We run 3 VMs on that host and turning a new config. However, this new virtual machine will replace our old Windows DC, DNS, server DHCP etc., and we'd like to config it before going live - will not perform us a migration of swing. We are a little worried that it can interfere with our direct network and that's why I would like to somehow almost segegrate it.

  For the moment, we have a single vSwitch0 linked to all our VMs and management card:

  

  What is the best way to do this so that our new DC (with the same domain name and within the same network) can be configured without it interfering with the current network.

  Thanks for your comments.

  Oliver

  Hello

  You can create a second vSwitch without physical network interface cards. Create a VM Portgroup on this vSwitch.

  You can configure your new virtual machine to use the Portgroup. So, he won't have any connection to your network.

  The good thing is, when you want to test things with a customer, you can create a second VM and configure it to the same VM portgroup on the second vSwitch.

  Two virtual machines on this Portgroup can communicate with them because the traffic is handled internally by the host.

  Tim

• How to delete messages from the Apple Watch

  I see that most of my older posts are still on my Apple Watch.

  These messages can be removed from the watch?

  Hi Ernie

  Delete the message is not synchronized on devices (and there is no way to enable this). Messages must on the contrary be deleted separately on each device (this is also how the app works through additional Apple devices, like a computer, iPad,...).

  To delete messages:

  -On your watch, open messages (via the home screen, accessible via a simple press on the digital Crown) > when you view the list of conversation, by sweeping left on a conversation > tap Delete / Trash.

• Pro-grammatically discover remote devices (cRIO or sbRIO) within the Local network

  Hi I'm developing an application where I need to configure my cRIOs. So first of all, I need to find out all the RIO within the network and configure one by one by selecting their IP address in the list.

  What someone has to know everything how to discover. I think there must be a solution that MAX discover any type of remote devices.

  Help, please.

  You specify the version of LabVIEW you use. In LabVIEW 2009, you can use the RT to target information VI for a list of all targets of RT on your local subnet.

  

• CANNOT ACCESS VISTA BY XP AND CANNOT ACCESS XP SINCE VISTA WITHIN THE SAME NETWORK MACHINE

  I'm using vista Business. while I try to view other machines with the same working group in the same network... My machine only manifests itself in the network... No, other machines are available... and will have remote desktop also does not work if I have an address user name and password and IP address of the remote computer running xp...  Help me.

  Hi NIRAJ KARKI,.

  You can't use Remote Desktop connection to connect to remote computers running Windows XP.

  This package contains the Link Layer Topology Discovery () LLTD Responder. The network map on a computer running Windows Vista presents a graphical view of the computers and devices on your network and how they are connected using the LLTD protocol. The LLTD Responder must be installed on a computer that is running Windows XP before it can be detected and appear on the network map. After you install this item, you may have to restart your computer.

  I suggest to install Layer Topology Discovery LLTD Responder (KB922120) (Link) and check if the problem is resolved.

  Link Layer Topology Discovery (LLTD) responder (KB922120)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=4F01A31D-EE46-481e-BA11-37F485FA34EA&displaylang=en

  You can check the link below.

  Setting up a network home
  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• nondeterministic accessibility within the wifi network

  My configuration:

  -router with internet connection

  -laptop

  -BB 9000

  My goal:

  The BB device opens a TCP socket via wifi and laptop connects with this Jack.

  Actually I'm working and I am able to transfer data, but the behavior is not deterministic and sometimes there are problems that are not understandable (at least for me). Including the connection string and the IP that I use are correct.

  The problem:

  The BB is able to open the plug when it is connected with the router and I am able to interrogate my IP. But I'm not able to reach the appliance with the laptop:

  -J' try to connect with my desktop or PuTTY

  -J' I try to ping the device: destination unreachable host

  The laptop is connected to the router and able to access the internet. And the device is connected to the router, otherwise open the plug would result in an exception (tunnel failure).

  My solution:

  I use the browser on the device to connect to a Web site. I try to ping the device again. If it's not accessible I connect to another internet site until the device is 'who responded. " Can I use my desktop application to connect to the Jack and it works great!

  But the solution is not acceptable to the final application, so I need to fix this. But I can't find a solution.

  -The router is working and the Internet works fine when I use it with my laptop.

  -L' device is able to access the internet via wifi without problem.

  -L' connected to the router, otherwise he would not be able to open the socket.

  So there must be some sort of locking mechanism within the device that does not transmit the ping requests or the connection of the laptop until I connect to an internet site. Maybe some sort of mechanism of energy efficiency or safety.

  Any ideas?

  New results:

  The problem does not occur when I use another router. So, I'm quite sure, that it is based on the first router or its configuration.

  @MSohn: thanks for the support!

• "Navto" command within the overlay network does not not in Android

  We are building an Android app for the native Viewer. We placed another article of the code within a web overlay which should "navto" If there is no interaction with the screen after a defined period of time.

  We used a piece of code, saved to a file .html, in an iPad app and works great. Import the html file in a box with Web content overlay. However, the same code and the process does not work in Android - we've even created a test iPad Folio (who worked on the iPad) and downloaded the same folio on our Android device in the content viewer - which did not work.

  Instead, what is happening, it's the box that we have placed our code in "Web Page not available" poster in the desired space after the end of our timer.

  It seems that he cannot understand the URL navto. Instead, it looks like an external web page. Whereas the iPad include cela and redirects to the section of the screen saver.

  
  We use a Samsung Galaxy S Tab.

  We expect a response from Adobe Support on this, but our time is fast approaching, so any help would be welcome please

  He broke. We have a bug fix in the process, and it should be available Monday.

  Neil

• Can not send messages on the hotel network, Server error: 550 5.1.1 < * address email is removed from the privacy * > rejected recipient

  and impossible to email - they get bounced back with the error, Server error: 550 5.1.1 <*** email="" address="" is="" removed="" for="" privacy="" ***="">recipient rejected, relay not allowed here. "What can I do to fix this?

  See if you can access your account via webmail.  This way you are not blocked.

  Most e-mail providers don't allow you to send from a location which you are not connected through their service.  So if you leave the House and connect, then they block to prevent spammers to send through their service.  Many have a way around this in the account settings, but only your e-mail provider may indicate what are the appropriate settings, because they are specific to the provider.

  Steve

• Error message: «the virtual network on the host computer drivers are incompatible...» »

  Just bought a new computer that is running Windows Vista Ultimate 64-bit.

  I installed VMWare Workstation 6.5.1 build 126130.

  I copied on a machine virtual from the old computer (running Windows XP Pro and VMWare Workstation 5.0.0 build 13124). I improved this VM Workstation 6.5. This virtual machine is currently running Windows XP Pro.

  When I run the virtual machine on the new computer, I get the following error message:

  "The virtual network on the host computer drivers are incompatible with the installed application of VMWare. Version expected 5. Please reinstall the product. Virtual device Ethernet0 will start disconnected. »

  Note that the virtual machine runs; I don't have any network capacity.

  I read the thread http://communities.vmware.com/thread/186731, who seems to have the same problem. He had installed 6.5 on 5.5; When he uninstalled and deleted all of the directories, and then reinstalled everything went well.

  I don't have any product VMware existing on the computer that would cause this type of conflict.

  So, what should I try to fix this?

  Thank you

  Wayne

  If you want to install only vmnetadapter, open cmd as admin in vmware workstation dir and run;

  "rundll32 setupapi, InstallHinfSection VMnetAdapter1.Install 128% CD%\netadapter.inf"

  You can also repeat for vmnetadapter8.

  If it does not run as above

  "vnetlib - install devices.

  Joakim

• 15 - r036tu laptop computer HP - WiFi keeps forgetting the old network

  Hello

  OS = Windows unilingual 8.1 with Bing [64-bit]

  WiFi adapter = Ralink RT3290 802.11bgn Wi - Fi adapter

  Driver = date 25/11/2013

  Driver = 5.0.37.0

  The situation is like this... I have an ADSL + router to iBall Baton and I had kept initially named as 'Deep' (without the quotes).

  Day 1, I had kept the "SSID Broadcast" to "Hidden" parameters so that no one will be able to connect to my WiFi network automatically. It worked great as I entered manually information WiFi my Samsung Tab 2. Now on the 1st night when I tried to connect my laptop, I found that it showed 'Hidden network', I clicked on it and entered the details and the net connected via WiFi.

  It was really good, I thought.

  Day 2, My Tablet will connect automatically but when I turned on my laptop Wifi it wasn't unable to catch or connect with the hidden network. So, I started displaying the name of the WiFi network. And reconnected both my tablet as my laptop HP 15-r036tu.

  Day 3, I turned on my WiFi... Tablet instantly connected to the WiFi network while the WiFi of my Netbook just couldn't... So I changed the name of the WiFi via the modem settings. Tablet reconnected to the new name of WiFi settings... Done the same with the laptop. Worked great.

  Day 4, today! I don't know everything, just not that hell will not with my laptop, but just, it does not detect my WiFi network. So now that I have to again change the name of my network and then reconfigure all my other gadgets just because my laptop cannot detect the WiFi? Surprisingly, he catches the other WiFi networks around my house except mine!

  Need help! Help, please!

  Hello Swayam_Das,

  Welcome to the HP Forums!

  I understand that you are having connectivity problems with your wireless network. It seems strange that you are able to view other connections network wireless, but not able to see your own. This tells us that there must be some sort of gap between the wireless card and your specific router.

  He also seems to be an update of your wireless network card drivers. You will find them here: MediaTek (Ralink) 802.11 Wireless LAN (WLAN) adapter.

  Let's try to keep things a bit:

  • Is there a firewall enabled in the router?
  • Have you tried running on another channel broadcast rather than hide the name of the network? (See why, here: How to boost your WiFi by choosing speed the way on the right)
  • You check the box connect automatically when you connect to the network? (I know it sounds silly, but never hurts to ask).
  • Your operating system is up-to-date with important updates?
  • Have you tried to reset the TCP/IP stack? (see below)
  • Have you tried to reset the winsock catalog? (see below)

  If you have reset the TCP/IP stack and winsock catalog follow these steps:

  1. Go to your home screen with all the fancy tiles. (Press the Windows key)
  2. Type "cmd" without the quotes.
  3. Right-click on the application from the command prompt and choose Run as administrator.
  4. At the command prompt, type netsh int ip reset resetlog.txt , and then press on enter.
  5. Type netsh winsock reset , and press ENTER.

  After doing this, you must restart your computer.

  Once you have completed all the steps above, it would also help to remove all the networks that your laptop is trying to hold back, to get a fresh start. To do this:

  1. Go to your start screen.
  2. Type 'network settings' without the quotes.
  3. Click network connection settings in the list of results.
  4. On the Connections tab, on the left, choose Manage known networks.
  5. Click on each network listed, and then click Forget.

  Now, log on to your network, reboot and tell me if he reconnects automatically.

• Home network with 2 PC with Windows 7 and 1 PC Windows XP. When sharing files via the MSHome network I have permission errors. How can I solve this?

  original title: cannot open or copy some files within the home network

  I have a home network that are connected by a router.

  A (main) pc is connected via a cable to a router on Windows XP pro sp3.
  2 other laptops running Windows 7 connected via Wifi.

  All of them configured to work with the workgroup MSHOME.
  On the pc main (with XP), I have a folder shared with full access, including change files. The folder contains videos that are uploaded directly to it.

  Sometimes 2 other laptops can not access some files, they see them but can't open them or copy them, I get this error:
  http://S3.PostImage.org/623foisor/image.PNG

  If I do the following:
  On my main pc I move the movie file in this folder to another folder and then bad bring it back.
  The file can be accessed and copied!

  What's wrong?!

  I'm glad that you guessed it work.

  Permissions show that "Everyone" has full access inherited, so that the list must have been made after that you have added everyone.  "Everyone" in this list without a guest user (or any user if you have active Simple file sharing) would not have permissions on this folder.

  HTH,
  JW

• I try to connect my apple TV.  I've been up to signature in ITunes but got the message that the connection failed because the network time has not been set.  I don't know what I should do.  Thanks in advance.

  I try to connect my apple TV.  I've been up to signature in ITunes but got the message that the connection failed because the network time has not been set.  I don't know what I should do.  Thanks in advance.

  Date and me are dealt with by the network. Try restarting your router/modem...

  Verify that DNS is set to auto

  Make sure port 123 is open on the router (refer to the manual of the router to you)

• Some time ago I bought Photoshop Elements in the apple App Store. I worked well. Now, if I try to start the application I get the message "Please do not run this application within this application package. On the other hand, it please launch Adobe Photos

  Some time ago I bought Photoshop Elements in the apple App Store. I worked well. Now, if I try to start the application I get the message "Please do not run this application within this application package. "Instead, please run Adobe Photoshop elements 13 of your Application folder. I tried this but it does not work. What to do to run the program?

  Follow these steps, Editor does not start | Mac App Store version

• Cannot print with HP6840 since I added the password to the Apple AirPort Extreme network

  I recently added to my Mac Airport Extreme network WPA password protection. While I can access the network from my computer, I can't print a HP6840, one of my two wireless printers, even if there is no problems prior to the addition of password.

  I can always print to my old HP LaserJet 6MP using an AppleTalk-Ethernet bridge and managed to reconfigure my second wireless printer to work with the new password.

  I already tried the following:

  Uninstalled/reinstalled the original CD and more recent software/drivers HP printer

  Tried to printer configuration using the Ethernet - half thanks looking for printer, received an error message "Communication error with a printer" and the installation process has failed.

  Checked: Safari bookmarks / Hello: printer does not appear

  Computer and the printer turned off and restarted the computer

  None of these attempts succeeded.

  Any suggestions on how to restore my wireless printing?

  Thank you.

  MichaelT

  Mac OS 10.5.7 iMac with Intel processor

  I spent 3 hours on the phone this morning with the HP Technical Support. While the call cost me $35, it's probably money well spent. After trying all kinds of approaches to installation, we finally concluded that the villain was probably the combination of personal WPA2 to authenticate password on my network and the inability of the HP6840 printer (now almost 5 years) to support WPA2. Tech said that WPA2 wasn't around 5 years.

  So I have two options: delete the password completely and let my unprotected network, use a WEP password (which can create an Apple AirPort and the printer can recognize) or try a WPA password. However, it seems that the airport offer only WPA-Personal and WPA Enterprise, while the printer does not seem to accept the WPA.

  Even if I don't really relish change passwords again, it seems that WEP is the way to go.

  Hope this helps those trying to install old printers on the new networks.

  MichaelT