Error message: «the virtual network on the host computer drivers are incompatible...» »

Similar Questions

• Receive the error message "the server that you are connected using a security certificate that could not be verified that the certificate CN name does not match the passed value.

  Prob Winmail.

  Receive the error message "the server that you are connected using a security certificate that could not be verified that the certificate CN name does not match the passed value. Do you want to continue? ». This started happening after that my laptop has been reformatted. I have synced with Gmail winmail and followed the instructions to do this correctly. By pressing the tab 'Yes' allows me to use winmail, but it's a little embarrassing.

  Using a digital signature?  Check the settings under Tools | Options | Security and also tools | Accounts | Mail | Properties | Security.

  Also, see here (http://mail.google.com/support/bin/answer.py?hl=en&answer=86382) and make sure that your settings are correct.

  Steve

• Update of the Slverlight 5. Error message: the component that you are trying to use is on a network resource that is unavailable.

  Original title: Slverlight 5 update?

  I try to install llatest update of silverlight, but get a message "the feature you are trying to use is on a network resource that is unavailable" I already uninstalled the previous version of silverlight, run an analysis of csm who said no problems.  Can anyone help please

  Hello

  (1) you receive an error code?

  (2) you are facing problems with the download of other updates?

  See the link below:

  How to clean a facility damaged Silverlight and then reinstall Silverlight

  http://support.Microsoft.com/kb/2608523

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 /) how to back up and restore the registry in Windows.

• error "could not complete the configuration of the ha agent on the host computer.". misconfiguration of the installation of the host network.

  Hola y buenos dias, he puesto 2 hots directly in una DMZ y al activar el error HA da este:

  "Unable to complete the configuration of the ha agent on the host computer.". misconfiguration of the installation of the host network.

  ESTOS son gemelos servidores y poner esta durante 2 Años last config antes han estado dentro infraestructuras en a cluster con otros 4 running perfectly. Ante nueva situation that met responsible security perimeter solo our esta posibilidad por lo as procedimos dio el a preparar los hots ante the nueva config enchufamos estos y an el swhitch of the demilitarized zone.

  Según me ha EDI el responsible of security perimeter, todo el trafico desde estos 2 hots hasta el esta allowed vCenter y asi mismo el cortafuegos responde al trafico ICMP a estos hots (este tema that he read in various Québec sites are important para el HA).

  Version of hots los Esxi 4.1.0 721871

  Me falta algo o tengo algo configurado evil?

  Important Algo a revisar?

  A greeting is gracias por adelantado

  Buenas

  Me designed that tendras 2 con 2 direcciones distintas vmkernel (lo del tema Las vlan y las tarjetas're menos ahora lo)

  Prueba has see the resolución desde el propio ESXi, prueba el uno a otro por both vmkernel ping, etc...

  A malas, saca ambos nodos del cluster y vuelve a unirlos con desactivado, cuando tengas los 2 HA, activa HA of nuevo y con eso you can smear of dudas so por el tema del VC University y UN vicio en BBDD.

  If todo esto falla, have as plantearte touch en el aam, are fairly complejo y peligroso if no to sabe hacer correctamente.

• Impossible to locate or select network adapters in the virtual network editor - W2K8 host

  I am running VMware 2.0.1 on a W2K8 64-bit host (with the windows firewall is disabled for now). VM images are all able to start and use the network bridged the host connection. I can access these images of virtual computer on the network, and even each image virtual machine running on that host computer has access to the public network.

  My problem is that I have three network adapters available on the host, but I can't individually select one of them in the virtual network Editor. The "Automatic gateways" checkbox is grayed, outside, tab automatic bypass, and if I try to select an adapter to exclude none appear in the dialog 'Add adapters excluded' that opens. In the virtual network mapping tab VMnet0 host, is set to be filled to an automatically chosen adapter and VMnet1 & 8 are configured to use their default VMware network cards. If I open the selections from drop down menu to one of the network adapter 10 VMnets listed in the virtual network mapping tab host there is no available alternative.

  Note: three network cards available on my W2K8 host server, one of them is a fault tolerant team consisting of two individual adapters and two other network cards are not associated. The team of the adapter has a network on our local network connection, but the other two adapters are connected to a private network. The fact that the images of the virtual machine running on that host are available on the network and be able to use the network indicates to me that my VMnet0 connection automatically open is finding and using the adapters together somehow (Luckily, by design?).

  I installed VMware 1.X and 2.0 on many host W2K3 servers and never encountered this problem before.

  If Win2008 follows a similar to Vista security model, then you must run AS administrator virtual network Editor.  Otherwise, you cannot make changes selections.

• I can't access to our private internet connection... I get the error messages like acquiring network address AND identity validation

  problem network address acquisition
  I can't access to our private internet connection... I get error messages like acquiring network address AND validation of identity no matter how long I wait nothing happens... Please help me.

  create a new internet connection or reset TCP/IP socket

• When the computer 'host' is accessible by the 'guest' on the network computer, the host computer crashes hard.

  There is no error message, making it difficult to diagnose. There are two computers running Vista, fully patched, connected via a network of small size. (Microsoft MSE, no virus, start using activated, etc. "It is clean). When the computer goes to * any * file of the host computer, the host computer crashes immediately. There is no error message, freezing of mice, all hard disk activity stops, it stops absolutely everything. The continuous guest PC works well, it simply notes that the host computer is "not available". Someone saw something like that? I certainly have not. It's far too vague to diagnose.

  I looked on the event logs and couldn't find anything saying. I disabled and re-enabled the network shares, etc. Because they are built Lenovo desktop computers, I have a difficult time to do a "repair", but I guess I could give that a shot with some Vista discs. As I understand it, these computers are not often with Vista bootable discs.

  It is essential that I can diagnose it. In almost twenty years of THIS I've never seen anything this vague and almost impossible to diagnose.

  Any help or advice would be greatly appreciated. Is it all the same to make a "full reset" or "Refresh" of networking in Vista? Who could do.

  I also note that it is a recent issue, these systems worked very well for a while and it's a change suddenly. Particularly curious because I locked the Windows updates to update only when I say so... and I didn't have lately.

  Have you tried to replace the NETWORK card on the computer that crashes? If not, it's what I would do then. MS - MVP - Elephant Boy computers - don't panic!

• Error message "the computer restarted unexpectedly or encountered an unexpected error" after starting the system on Windows 7 Recovery.

  While trying to reinstall Windows 7 on my Dell Inspiron 1545 of the reinstall DVD after you have installed a hard drive again, I got this message: error message "the computer restarted unexpectedly or encountered an unexpected error" after starting the system on Windows 7 Recovery. Tried F10, SHIFT F10 and nothing happened. Then I tried a suggestion of virtual Agent to press F8 to get to advance Boot Options, but this option does not appear! Help!

  For Dell cptrs, you will need to press F12 to access the unique Boot Order Menu(= a temporary setting), little after the Dell logo appears on the desktop. U hv only 5 seconds to do, b4 the cptr will automatically initialize to top with the internal HARD disk.

  ....... F12 is usually used to start the cptr since the DVD player or a plugged in USB-flash drive with a Win 7 install or recovery media.

  To permanently change the boot order, you must similarly press F2 to access the full Boot configuration Menu. The default boot device is the internal HARD drive, but this can be changed to DVD player, USB, disk, network drive, etc. F2 is usually used to start the cptr of an external hard drive(= USB HDD) that contains a bootable Linux operating system.

• Error message "the service user profile Service has no logon. Unable to load the user profile"How can we get in the laptpop to solve the problem? /

  We get the error message "the service user profile Service does not logon, user profile cannot be loaded."  Prevents us from entering the computer laptop-so how to solve this problem?  Help?

  Hi LisaPie,

  Step 1: You can run the fixit available in the article below

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  If you cannot start the computer in normal mode, try the steps in safe mode with networking

  Step 2: Start the computer in safe mode with network. To do this, follow the steps below:

  Access the menu advanced startup options by turning on your computer and pressing the button F8 before Windows starts. Advanced startup options menu select SafeMode with networking

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Binds a guest operating system to one of the two network adapters on the host computer?

  Sorry if the topic is confusing.  I have a host operating system to Server 2008 running on a server that has two network jacks.  Allows to call an (192.168.10.24) and B (192.168.10.25).

  My guest operating system is set to bridged with the IP 192.168.10.26 mode

  I want to say VMWare to always use A NIC when it comes with this guest operating system.  Is this possible?

  In my (Control Panel Windows) network connections, I see my two NICs A and B as well as VMWare Network Adapter WMnet1 and VMnet8.

  Thank you!

  Run the utility for configuring the network (vmnetcfg.exe) as an administrator on the host computer, disable the automatic bypass, set vmnet0 to one of your physical network cards and a virtual NETWORK adapter not used, such as VMnet2, and then assign the other physical NIC. Then to your comments, change its settings and select vmnet0 or vmnet2.

  Guy Leech

  VMware vExpert 2009

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• I lost the ability to upload files to a Web site. I transfer files from my computer to a web site and I get an error message "the connection was reset" and the file will not download. I try to transfer the photos and I get the same message.

  I have download a scanned receipt on a Web site and I get the error message "the connection was reset". I downloaded these reception for two years and last week, I had to use a different browser to complete this operation. I log onto the site and make the report, I have to do, but I can no longer download on this site.

  Safe mode does not work. However, when I downloaded Firefox laptop everything worked. Any suggestions as to where I should go now. Thanks Fire Fox works on other sites I work with. The download has started working. I think the problem was the website.

• I get this error message 'The URL is not valid and cannot be loaded' when I try to go to Firefox home. I uninstalled the modules, uninstaleed and reinstalled a new fresh firefox which did not help

  I get the following error message 'The URL is not valid and cannot be loaded' when I try to go to firefox home. I uninstalled modules, uninstalled Firefox and then install a new version. Still have the problem.
  Thanks for the help

  This problem may be caused by a corrupt installation of Visual C++ or incomplete (several versions can be installed-by-side; SxS) it lacks certain runtime components (redistributable Packages), which depends on Firefox (problem with an embedded manifest file that specifies a specific runtime version).

  You need to install the missing components (for example, Redistrbutable end 2005 ++).

  • https://www.Microsoft.com/download/en/details.aspx?ID=5638
  • [908165/questions/908165] The URL is not valid and cannot be loaded
  • bug 713167 - Microsoft.VC80.CRT SideBySide errors, browsercomps.dll

• Unable to communicate with the host computer using the network University compactRIO

  Please move this topic to the appropriate section if it is not the right section. I can't locate a Council called the compactRIO. Thank you very much.

  I encounter this problem of network communication with my cRIO 9067. the linklocal or USB connection is fine but not static IP connection on the network. I contacted the it Department to assign me a static IP address for my MAC address of cRIO. In our University, they block only unknown MAC address access and the cRIO is in the whitelist. Here are the details

  cRIO attributed to IP address: 129.12.54.xxx, tried both netmask 255.255.255.0 and 255.255.0.0, no luck

  the host computer's static IP address: 129.12.50.xxx, subnet mask 255.255.255.0 (information of cmd - ipconfig)

  First question would be: they are on the same subnet? I need to make sure that even if scientists confirm that.

  Secondly, I followed https://www.ni.com/getting-started/set-up-hardware/compactrio/static-ip by using the IP address assigned, but not luck. I've noticed that I configure same address type cRIO static IPv4 using the USB connection or for local link mode, she went in DHCP mode or Local link once I unplug the USB and restart it.

  Whenever I restart MAX, connect the cRIO and my host to Ethernet jack on the wall, it shows the DHCP mode or link with assigned Local 129.12.54.xxx IP and the subnet mask 255.255.255.248. In addition, I am not able to change it in a drop-down list even after removing it and restart MAX indicated by tutorials OR.

  If you need more information, please let me know.

  Help, please!

  Jinyu

  Dear Mikko,

  I am pleased to tell you that the problem has been resolved. The cRIO works very well.

  The reason why it does not work is in first place because they are in the other subnet. For my school, my host is 12x.1x.54.130 and the IP assigned to my cRIO is 12x.1x.54.131. the subnet mask is 255.255.255.0 number marked in red must be the same for the cRIO is connected correctly.

  Kind regards

  Jinyu

• I get the error message, the Windows Installer Service could not be found, is there a solution?

  I get an error message, the Windows Installer Service could not be accessed.  This can occur if Windows Installer is not installed properly.  Is there any solution for this?  Also I can't find service.msi.  Make sure you typed the name correctly and then try again.  Any help I can get for this will be appreiated.  System restore not working anymore.  Carolyn Stallings

  Always, always, first specify what operating system you are using before you begin to explain the problem.

  Try this tutorial. It works for Vista and Win 7.

  http://www.Winhelponline.com/blog/Vista-the-Windows-Installer-service-could-not-be-accessed/

• Issue to receive the error message "the system has recovered from a serious error" while working on the computer and the computer restarts automatically.

  Original title: The system has recovered from a serious error-

  The system has recovered from a serious error-

  When you work in windows xp home edition, whenever this programe message and stop running and some auto restart machine.

  What is the solution for this?

  Hi Sandeep,

  Thanks for posting your question in the Microsoft Community forum.
  It seems that you have a problem with the error message "the system has recovered from a serious error," while working on the computer, and the computer restarts automatically.
  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  I may need a few more details to better understand the issue.
  Method 1: I suggest following the steps listed in the article and check if it works.
  Error message: the system has recovered from a serious problem
  http://support.Microsoft.com/kb/316424

  Method 2:
  I suggest you analyze your computer by using the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.
  You can see the article for more information:

  A "System has recovered from a serious error" message after every restart.

  http://support.Microsoft.com/kb/317277

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.