instructions for a video recording

Similar Questions

• How do you get the timestamp for transfer video recorded on hard disk. Windows 7

  NEST camera time stamp each video created... once I have transferred to my Windows & hard drive to record, the date & time disappear.     How to get Windows & RULE to keep the subtitle of the date & time.

  Otherwise, the security video is worth nothing, if you cannot prove date / time, it happened.

  This happens when the date/time information are stored in a non-standard format. Best is to ask suppliers to the camera.

• Optimized for Chromakey video recording mode?

  Hi people,

  I am a moderately fluent user of Adobe Premiere Pro (I have CS4 at home and use CS5.5 at work), but I'm just my feet wet with a greenscreen Setup. I shot some footage of test yesterday, using the Panasonic HDC-TM90. The camera can shoot 1080/60 p, or a variety of modes AVCHD. I turned my test images AVCHD [HA] (1920 x 1080 17Mbps/VBR) mode.

  After the first film, I used the color key effect to remove the background, but found that there was some severe enough blur on the hands of my subject, which resulted in green showing through the blurred image, resulting in turn in his hands more or less disappear.

  Unfortunately, my company just bought this camera, so I don't have the opportunity to get a better camera, and I have to do with what I have. My understanding is that the 1080/60 p in shooting mode will reduce or eliminate motion blur, but (if I understand it well), I'll need to re - encode the video to something like 720/60 p to make it compatible with various playback devices.

  So my question is, someone has experience with this, and can they recommend a process or a method of shooting? If I pull the 1080/60 p, first and work my magic chromakey, the image will look like poor after re-encoding?

  My apologies if these are stupid questions - as I said, I'm just getting started with this stuff, and I'm under the gun to get this project finished. Thanks in advance for any help.

  PC Glenn

  Shoot 720 p 60 at higher transmission speed.

  And Ultra key is the right tool.

• VLC player and other applications won't record video correctly, only works for .mp4 videos.

  Hi, I have a problem with the video recording of vlc player and their opening upward. Once save the .avi video it doesn't give me the audio. It does not with .mp4, however. Which cuts and works fine when I play the video.

  He just started doing last week. I do gifs with clips and load it into photoshop.

  Even for other types of software, this thing of décolletage, it cuts fine .mp4, but once I try to cut the .avi, it becomes only the audio.
  I wonder is something wrong with my laptop and settings? I don't know how it would have changed. Or damaged something in my laptop.

  I have Windows 7.

  I really need your help.  Thank you!

  Emily

  Hello MIeXiHuanNi,

  Have you tried to post on the VLC forums to see if they have any ideas?
  http://Forum.videolan.org/
  You may also download additional codecs:
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

• Instructions for managing macs w ARD on the internet (no static IP address)

  Please excuse me if it's asked all the time, but I searched and can not find detailed instructions for this.

  I need to manage more than one Mac, on connections to the internet, the devices will not be on the static IP, they will constantly be moving around.

  All the videos I have found online seem to show how to connect and manage Macs on LANs w ARD.

  Details:

  ARD v3.8

  All Mac on El Capitan

  Very appreciated for any help!

  This question is not particularly related to Apple Remote Desktop; for ARD.  This is a configuration of generic firewall and networking question, so good enough instructions for your specific firewall will work here, as long as the firewall can redirect ports - port TCP 5900, in this case - or if your particular firewall has a VPN - Firewall Server average range and high-end frequently - or if you can implement a VPN server behind your firewall and configure the firewall to forward the VPN protocols (different ports) and ports necessary for the particular VPN.

  In general...  I would suggest three ways...   1: set up your firewall to port before port TCP 5900 to the client target.   Maybe TCP 5988.   Or set up a VPN server in your firewall and connect to that and use ARD via a VPN.    If you want to access more than one system on the target network, you will need to either use a range of ports to forward to specific systems behind your firewall and happens to be a problem with many customers - I don't know immediately off-hand if the ARD client allows even to select different target ports - or to set up and move to a VPN.    2: creation and configuration of the VPN server in the firewall allows access to all systems on your network target - a VPN connection makes your local system as it is directly connected to the target network.  3: If you have the VPN server running on a target system and accessible through the firewall port forwarding, this target system must always be available, and all VPN traffic is routed through this system.   It is more complex and can also be a bit difficult to set up.

  If you directly expose ARD ports to the Internet via port forwarding, you'll want to either restrict the available source IP ports (to reduce the magnitude of the attackers), and you'll want to be very careful about passwords on target systems.   Ports of the ARD are detected very fluent, and several people and botnets will attempt to access the system password-baited; trying to guess the users and passwords on the target system.   Once attackers have a login and a password, they will then try to spread throughout the rest of the network.  (It's part of why I prefer to use virtual private networks).

  Sierra of MacOS support PPTP VPN, so I wouldn't go with any configuration of VPN that you considered it.   I'd probably use L2TP/IPsec, because the customer is generally available in most of the other operating systems, Mac OS and iOS.

  There is information available on the network ports used by Apple devices.   If you enable VPN port forwarding, there are discussions on the ports and protocols required to according to VPN you use posted around the ' net and not all firewalls is particularly good to port-forwarding, the protocols and ports VPN. "  Low-end older firewalls and firewalls tend to have problems here.

  To locate on the networks of the target systems, you get to use dynamic DNS from client devices or other means to identify the public IP address that is associated with the target customer.   If customers are roaming on disparate networks and not simply roaming IP addresses on their private networks (these addresses can be fixed through DHCP configurations, too) and if you don't have access to intermediate firewalls, then you will probably have to rethink the entire approach, unfortunately.    Connection to mobile systems distance arbitrary is not especially it is possible, he must do something on the client that "tags" or "ad" its network metadata to your own server from tracking client or server monitoring of some other entity (for example messages to the DNS servers used by the dynamic DNS providers), or the management connection must be initiated from the client.    ARD does not support these mechanisms.   Discussions here can get pretty complex, too--in terms of network configuration, both in terms of security for the clients and servers.

  There are a few related discussions this general topic in the forums. See here, here, here, here or here.

• iPhone 6 - video record stopped with 5 GB of storage left

  Our iPhone 6 stop video recording with a message claiming that there is insufficient to continue storage, but the graphic bar at the bottom of the iTunes window shows that there are more than 5 GB of free space.

  Why?  How to avoid?  We must break long claws in pieces by stopping and restarting before a deadline?

  What is your storage space available for example on the phone under settings > storage and use iCloud?

• PlayMemories Mobile/Smart Remote - no video recording! Why Sony Action Cam it allows?

  Just bought a NEX-6. The Smart Remote application is the reason why I bought the camera in the hope that, with a future update to the app NEX-6 and 5R can not only turn the trigger but also switch VIDEO! Currently, even when the Smart remote control app is running, even if you manually press the video record on the camera button it gives a warning saying "video not available when running this application. Please leave app to record video.

  For some reason sony has decided to leave the video feature switches the NEX-6 and 5R. After closer investigation I noticed that the other camera to use PlayMemories Mobile apps is the Sony Action Cam.

  Cam Action also uses the PlayMemories application in the same way as the smart remote control application, but he is able to turn on/off the camera video. In addition to setting other parameters such as EV and interval shooting.

  Now, I know that the Action is primarily a video camera and it obvioustly need to toggle the video but I don't see why Sony has ruled out this possibility for the NEX-6 and 5R because they all use the same wifi technology and the same APPS! Why do the same application run differently for different cams.

  The only way to turn the video recording remotely at this point is to buy the Sony NEX Remote control version 2 that comes out.

  The reason why I want to toggle the video from the camera app is so that anyone can use tablet or a cell phone as a monitor of affordable directors for when the game etc.

  I subscribed to the youtube channel "Sony listens" and that's what the Sony Rep Said:

  «FlyLifeFilms, the quick answer is that the action cam is designed to be mounted and legs, so it can be used for action packed high where using the buttons on the camera would not easily be used.» The Nex6 is not designed to be used as such. So, it was a marketing and a design decision to include this item on the camera action and not on the Nex6. I forwarded your comments to the appropriate Department with impatience. Thank you

  Scott Fuentes

  SonySupportUSA ".

  Annother unhappy user NEX - 6a writes:

  "Scott, who is a response fairly unconvincing, because Sony is best known for the fragmentation of functionality of product in order to increase the sales of several products with different characteristics."

  The simple fact is the PlayMemories software already has the ability to start/stop video with the cam of the Action. This is why it is not a question of "update" the software to include functionality for NEX-5R/NEX-6 cameras, but rather simply activate it where Sony has strategically disabled for reasons of the profit motive. »

  I hope sony their app updates, or at least let us know why they would allow the Action Sony cam to have this feature when top model NEX cameras turn it off knowing that they both use the same application!

  Dear Sony,

  Please allow at least these features in the application:

  1 start/stop recording a video.

  2. change shooting mode, shutter speed, Aperture, ISO

  Or better yet, like facets of the touch screen of the camera interface and let us control every parameter. I have to pay for this version.

• unwanted video recording

  Recently updated my phone. Almost everytime I take a picture, the camera also takes a video... or two or three. I took great care that I record not by accident, but sometimes 3 or 4 very short (half a second or less) video record, sometimes only one. Rarely, no video will record. What the devil I have hurt, or how have I messed up my settings? I am sure it does not knock the video while I put the or whatever it is, it's for sure happening 'automatically' by gremlins (tee hee) or something.

  Your description is live photos.

  Open your camera application, there should be an icon beside the HDR - if it's yellow, that means that you have live photos enabled, click it to turn it off.

• Video recording in a theatre

  I use a Canon VIXIA HF G10 camcocrder and I'm looking for advice and suggestions on how to avoid overexposed video recordings during the recording of the stage productions in my high school.

  Sometimes the lights they use are so bright that faces are overexposed, but I have no control over this.

  In manual recording mode, I tried the program AE (P) and registration (M) manual exposure programs.  Within the scheduled program AE,-3,0 on the scale of manual exposure adjustment does not always exposure enough.  I tried using the two AE lock settings (Normal and highlights), but did not fully test these settings.  When I used the manual exposure registration program, I could not change the f-stop number using the touch screen while recording.  (I later discovered that I could change the f-stop number using the Custom wheel while recording).  Using the manual exposure registration program gave my video a different aspect of the AE result set.  The video was not as clear and there were pictures 'ghost' or 'trails' (I don't know the technical term for what I saw) as soon as the topics more.  I was surprised that the video recorded with the manual registration program exhibition looked so different.

  Any suggestions?

  Hi BHAllen, as you have seen, in dark places of shooting can be difficult. For movies created in a context like this, I recommend you choose the shutter speed, and you'll want to select a shutter speed fast enough to stop the action, if the brightness levels allow this.

• PowerShot SX510 HS automatically stops video recording after 10-15 minutes in the record.

  PowerShot SX510 HS automatically stops video recording after 10-15 minutes on continuous recording. Is there a way to disable this option? I would like to record videos up until I press the button stop recording or the battery is low. I've disabled all the setting of energy saving, at least, I think I have.

  The camera has some limitations for registration, as do all models of Canon. Here's how you can extend your durations for registration to a maximum of about 1 hour, but there is a limit of 4BG regardless so once he hits 4 GB recording stops and has to be restarted.

  Also, the memory card has to be at least a class 6 rating or recording will stop as soon as possible regardless of the size of the clamp.

  It comes to page 161 of your manual

  

• Think about making one for the voice recording...

  I've heard great things about the new Sansa Clip +. However, I got a Sansa Express before. It was so horrible, it makes me a little skeptical on the Clip +. One of the most horrible attributes of the Express was the refresh database which came he started, taking over 7 minutes, if it didn't cut itself automatically to every time (I had to click a button to keep it close). But before all the music. For some strange reason, he would play only half of my music. Perhaps the tags have been stripped, very well. But he should be able to play without worrying, because it worked on my computer and other mp3 players.

  Sorry for snapping, but I am in desperate need of an mp3 player. I'm quite the cheap fellow; I also need a digital voice recorder voice that will work in 10-15 (never passed 20) feet. I have an old burner, but it is a consumer of battery. I can not connect to my PC.

  Now, on the mp3 player, it looks like the clip + has firmware similar to that of the Express, but cleaner and better. I saw the review and startup does not seem to be problamatic. However, I leave again I tested the voice recorder on my Express to a 15 ft. He picked up a bit of noise, but I had to max volume out to distinguish what has been recorded (which I couldn't still do).

  I really want the clip to be all around the device, I need, but he would need to work sufficiently to 15feet. I've heard so many comments, but virtually nothing about its features shortly. I really want to do, but Sansa has already failed me once...

  Hello Soy. You don't like how I answered your questions on the ABI plateau? Also, I'm very cheap, but decided to splurge on a Clip + even though I already had a rocket and a Clip. To be quite honest with you, voice recording is the function of quality lowest on the Clip + Clip and Fuze.

  I just tried to save it to my Clip + voice. I just tried two records in the sample. With the player only about 4 feet away, she picked up a lot of noise from a fan in the room. IMO to about 15 feet below the record would probably unintelligible if there is a fan noise or other noises in the room. The speech on the video recorder + works best at short distance from the speaker. Cut out from the rear of the speaker, it can make acceptable recordings.

  It is doubtful that you would get a great record with any player of mp3 of 15-20 feet away. The recorder I've mentioned, Member of the Board can be set to be very directional, but despite this, 15-20 feet away would be a mistake to get a decent record.

• Problem running videos recorded by Xperia Z2

  Videos recorded by the cell phone does not work correctly when transferred to the computer. I get a black picture and no sound, but the progress of the Player bar shows that the video is running. It is not a problem in the codecs in my computer since I run any video file in it with no problem, including MP4, it's the same video file used by the phone. Not to mention, while browsing the net, I found many other owners of this model having the same problem as me.

  Any help will be appreciated, thanks.

  PS: I instaled already all the updates available for it.

  If you use only one option 'import' via the PC, then it would generally be the likes of Windows Media Player import fact. You are the best of either drag and drop or use the MediaGo software to perform this function, then you have found the raw file.

  
  What are your thoughts on this forum? Let us know by making this short film survey.

• DIRECTIONS: Print screen / Screen Capture on Gateway Tablet PC w / Windows Vista for photos/videos of office & Active Windows

  I try to use the screen capture / print screen on my gateway Tablet PC...

  I follow Windows help & support, yet when I try to paste it into Paint, it only will allow me the option "paste from ' and not 'stick' in the ' Edit '...

  What I am doing wrong? Should I do it differently on Gateway Tablet PC?

  -J' I NEED HELP from USER to Capture screen-Still and video Capture on the Windows desktop screen and the Options in the Active window.

  * The use of Screen Capture (Print Screen) on Gateway Tablet PC with the Windows Vista operating system:

  I followed HELP & SUPPORT directions exactly...

  * Gateway Tablet PC keyboard print screen says/labeled "Ins" button and immediately under the same button says "PrtSc".

  * "Help & Support" said to

  -Press the print screen key.

  -Open "paint."

  -Click on "Edit", then

  -Click "Paste"...

  Try clicking / use the "Paste" option in the "Edit" menu in the "paint" will NOT work:

  When I click on "Ins" / "PrtSc" button on a Gateway Tablet PC for the screenshot, I have:

  -Open Windows 'Paint' accessory,.

  -I click on "Edit" in the menu "painting."

  -'Paste' option is unavailable / greyed out. It will only allow me the option 'Paste From'

  -Option 'Paste From' does NOT work

  If you press your print screen and then open Paint... What is happening
  If you type...    CTRL + V...?

  Have you tried the tool capture of Vista? It is more versatile than print screen.

  Windows Vista - activate the Vista Snipping Tool
  http://www.PCWorld.com/article/137099/activate_vistas_snipping_tool.html

  Use capture tool to capture screenshots
  http://Windows.Microsoft.com/en-us/Windows-Vista/use-Snipping-Tool-to-capture-screen-shots
  (Vista Home Premium, Business, Ultimate, Enterprise)

  Vista tutorial - How to use the tool captures of Vista
  http://www.Vistax64.com/tutorials/148532-how-use-Snipping-Tool-Vista.html

  Info on the video capture:

  Vista's Movie Maker can capture screenshots:

  Windows Vista - Movie Maker-
  Take and use a picture from a video frame in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/take-and-use-a-picture-from-a-video-frame-in-Windows-Movie-Maker
  Windows Media Player-
  Capture images from DVD in Windows Media Player or Real movie scenes
  http://labnol.blogspot.com/2005/11/capture-still-images-from-Windows.html

  VLC Media Player free software has also a good option for screen video capture...

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.videolan.org/

  For the installer for your screen Capture... Open VLC and
  Reach... Tools / Preferences / video button / video
  Instant image section.

  In the directory field... Search for and select a folder
  to save your captures po (for example... you could
  Create a new folder on your desktop and select)

  TO... Prefix... check the box... Sequential numbering.

  TO... Format, choose JPEG or PNG.

  Finally... on the left, click on the Save"" button.

  Now... Play the video and pause by pressing on your
  SPACEBAR when you see a screen you want to capture.

  To capture the screen... type...  SHIFT + S

  Press space to advance to the next photo...
  ect... etc...

  Also... VLC Media Player... allows to save during video playback
  and will save the segment when you stop recording. It comes
  very useful if you need a small clip of a larger video file.

  VLC 1.0 records video of the DVD
  http://Lifehacker.com/5318807/VLC-10-records-video-from-DVDs

• Stereo video recording does not work after update to ICS

  HII am dido in the India. I've updated my xperia mini (ST15i) to ICS. After that the stereo video recording does not work. Last week, I found a new update for the CSI and I updated to construire.587, now also the same problem exsists. Someone please help

  You can fix it, but you need to root your phone

  Look at the xda forum how do (you must change a setting in a file config. Furthermore, also you can improve some other characteristics of the camera)

• Z5 video recording not working anymore

  I have a Sony Xperia Z5 for a few months and it worked fine. Yesterday, I discovered that the video no longer works. If I open standard camera app, by scanning the video and press the red button, the application crashes and reports "camera has stopped." Taking the photo very well and a few weeks ago works, video recording has also worked. I can still play the old video.

  Help, please.

  Try this

  go to settings > app > can find video > erase data, clear cache and force stop > then reboot the phone and try its work or not

  Do not forget to give congratulationsand select the correct answer