Instructions not clear for erasure of data from the app

Similar Questions

• Help the erasure of data from the laptop before selling

  I have a Dell Inspiron 1525 that is a few years old. I decided to upgrade to a new laptop several months ago and have moved / backed up everything I need from my old dell. I have someone who agrees to buy it for a low price, but want to make sure that everything is removed from the Dell before I sell it. I have windows on my Dell laptop.

  Some tips to make sure I'm not personal information? Thank you

  Yes, should, however, if your planning to install the software on your new machine and assuming that you have 1 license then you should really be their elimination from the old computer so your installation on the new.

  If you don't want to do a restore to factory... you could create a new user on the computer account, and then delete your current user. If you have stored something outside the user profile which should be deleted also. Just empty the recycling bin and then uses the wiper of free space to ensure that the data is missing...

• erasure of data from the hard drive?

  Hey Microsoft, I have a problem

  I had two boot(win_xp_pro_and_win_7_ult).they are the two 32 bit.

  so I tried exchanging win xp with win vista ult 32 bit (download, NOT on the cd).

  I started to install and after 4 5 steps made my pc restarted and it stuck at "Please wait windows is to configure your computer" or something similar to this for 30-40 minutes.

  I rebooted it and started on win 7 I started by now. I tried to start the whole process of win 7, hoping that it will not get stuck, but he said I need space on my hard drive I got previously from win xp. So I opened up Explorer and I have seen that there are a few new files (from win vista).

  I tried once more (started on vista) and my pc has been blocked for the same post in front. So I decided to free up space and tried to format the hard drive, but I received a message(on_win_7):Windows was unable to complete the format. I tried to delete all the files, but I've done worse thereby; I get error file missing at the start of vista. I have the installation files on my win 7 and I want to delete everything on my hard drive.

  Please help and thanks in advance!

  Hello

  You want to eventually dual boot Vista and Windows 7.

  And make a Bootable DVD from the downloaded ISO of Vista.

  And Neosmart has instructions on how to burn ISO disk images using imgburn:

  http://NeoSmart.NET/wiki/Burning-ISO-images-with-ImgBurn/

  "Install multiple operating systems (multiboot).

  http://Windows.Microsoft.com/en-us/Windows/install-multiple-operating-system-multiboot#1TC=Windows-7

  "How to set up a Dual Boot Installation with Windows 7 and Vista"

  http://www.SevenForums.com/tutorials/5166-dual-boot-installation-Windows-7-Vista.html

  "Dual Boot computer preinstalled Windows 7 with Vista.

  http://www.howtogeek.com/HOWTO/8834/dual-boot-your-pre-installed-Windows-7-computer-with-Vista/

  http://apcmag.com/how_to_dual_boot_windows_vista_and_windows_7_vista_installed_first.htm

  See you soon.

• What is the best way to move the data from the app and Server data structures?

  Hi guys,.
  
  I developed my application locally with Apex 4.2 and Oracle 11 g XE on Windows 7. Not far away, it is time to move the application to a server Oracle Apex. I guess that Exim is the way to go app. But what about the APA tables and data (tables/as 'customer' and 'account' created specially for the application)? I've been using a modeling tool, so I can run a DDL script to create the database server data structures. What is the best way to move the application data on the server? Is it possible to move the structures and data in a single process?
  
  Thank you
  Kim

  There is probably another way to get here, but in Developer SQL, on the navigation tree, expand objects until your table, right-click, and then click EXPORT... you will see all the options. It is a tedious process and it sucks IMO, but yes, it works. This is zero especially because 1) it's a table at a time, 2) If your data model is robust and has constraints and sequences and triggers, then you will need to disable all for the insert and we hope you can re-enable constraints, etc. without hitch (good luck, unless you have only a handful of tables)

  I prefer to use the oracle EXP command-line to export an entire schema, then the server target, I use IMP to import the schema. In this way, it is almost true. This makes the dirty life if you develop multiple applications in a single schema, and I felt pain - however - it is much easier to drop the tables and other objects is to create them! (thus, even if the process of EXP/IMP moved more than you wanted to "move".. blow everything you don't want on the target after the fact...)

  You can use method datapump oracle too.

  If not, what can be done, IF you have access to both servers of your instance of SQL developer (or if you can tnsping both already from the command line, you can use SQL * MORE), is to run a script that will identify the objects of your applications apex (usually by the prefix for the names of objects, such as % EBA_PROJ_ etc.) and do all the manual work for you. I've created a script that does just that so that I can pass data from dev to prod servers on a dblink. It is difficult because of the order that must be executed to disable constraints and then turn it back on and of course, more complicated if don't always precede you ALL your "objects demand '... (tables, views, triggers, sequences, functions, procs, indexes, etc.)

• Creating application for archiving of data from the mobile device in LabVIEW.

  Hi guys I need help for my application. I need to connect my phone with the PC via USB and then open Explorer with files and folders, that are in the phone, mark and saved and choose the obligations imposed. Something like in this video just in LabVIEW.

  Can you help me? I am a beginner in LabVIEW, so please consider.

  Thank you.

  
  

• VI do not transfer data from the instrument.

  Hello to all who are interested.  I'm working on an instrument driver for an Agilent D3000A generator of signal (E4432A) trying to get the generator to sweep the amplitude of - 30dBm to-75dBm and then come back in a loop.  The loop is in a structure of the event and is called by a switch on the front panel.  When the switch is selected event triggers and loop information is passed to the VI.  The problem is the 'Sweeping Steps' VI does not use data from the number of points in the sweep and pause at each time and the tracks of the loop as the amplitude is just switching between the min and Max amplitude levels.  But once I have stop the generator program will continue sweeping (only in a sense) but the correct time and the number of points.  When I use the spy "measurement and Automation Explorer" program AND I do not see that the data are transferred in the instrument.  I don't know if the Subvi the execution order is correct and was amazing if someone could take a look and let me know if I have them in one order incorrectly.  Could not find an example of this type of program examples of the driver so there is little help.  I joined the program and the driver of instruments for your comment, then please take a look and send any information you think will help me to get this working properly.  I have also tried to run the single sweep mode sweep and have just the change of direction for the sweep to the other side of the ramp, but I still get the same results.

  The generator has 15th and ONU3 options.

  I, m using LabVIEW 2010 on a Dell Dimension 2400 running Windows XP and service pack Version 5.1.2600 Service Pack 3 Build 2600.
  Please let me know if you need other information.

  Thank you

  Just for the short term, right click on the structure of the event, select Configure the events managed by this case and uncheck the lock front panel.  Also, I don't know if you caught my edit.  I think your problem is your expectation (or lack of).  At your expectations to be slightly more than the number of steps to multiply by the pause time.  You must leave the instrument perform its scanning after all.

• I just downloaded a version of EVALUATION of MapPoint 2013 demographic details resemble MapPoint 2007... the trial version not have the new data from the 2010 Census?

  I just downloaded a version of EVALUATION of MapPoint 2013 demographic details resemble MapPoint 2007... the trial version not have the new data from the 2010 Census?

  Hello

  The question you have posted is related to Microsoft MapPoint and would be best suited to:

  Technical support of Microsoft MapPoint

  http://www.Microsoft.com/MapPoint/en-us/support.aspx

  Support for MapPoint, streets & trips and Highway

  http://support.Microsoft.com/ph/851

• My browser is running do not. I uninstall, install several times. Uninstall cookies, delete the data from the user, install in another user - no reaction. What's wrong? Help, please

  My browser is running do not. I uninstall, install several times. Uninstall cookies, delete the data from the user, install in another user - no reaction. What's wrong? Help, please

  Start Firefox in Safe Mode {web link} by holding down the < shift >
  (Mac options) key and then from Firefox. Is always the problem?

  Start your computer in safe mode with network. Then launch Firefox.
  Try the sites secure web. Is always the problem?

  Start the computer in Mode safe;
  Free online encyclopedia

• USB ports do not work, although I can charge my phone with the computer, it wont let me view my data from the phone.

  I had my computer about a month ago and it was working fine. But then, all ports usb stopped working on me. Although I can charge my phone with the computer, it doesn't let me see my data from the phone. I've tried everything.

  I'm guessing that this problem came from me turning off the computer by disconnecting it instead of turn it off manually.

  Help, please.

  Hello

  
  1. what happens when you try to connect any USB device to the computer? You receive an error message?
  2. What problem is specific to any USB device or all devices?
  3. what troubleshooting measures have performed up to now?
   
  Do the methods and check if it helps.
   
  Method 1
  Try to use the phone on another computer and check if you are able to access the data. If you have the same problem on another computer then the problem is with your phone. If you are able to access the data, then perform method 2.
   
   
  Method 2
  Reinstall the USB controllers.
  This method addresses the steps where the USB driver currently loaded became unstable or corrupted.
  (a) click Start, then type Device Manager in the start search box, and then click Device Manager.
  (b) expand Bus USB controllers. Right click on a device, and then click Uninstall. Repeat for each device.
  (c) once complete, restart your computer. Your USB controllers will automatically install.
   
   
  Method 3
  Run the fix - it tool and check if that helps.
  Diagnose and automatically fix the Windows USB problems
  http://support.Microsoft.com/mats/Windows_USB_diagnostics
   
  Response with more information to help you.

• The lateset, 2015.5 edition, does not transfer data from the metadata, only the focal length objective. Disappointment when you want to know what that lens you used. (It allows to rename the files but after you create a second copy. "It's an improvement.)

  The last edition, 2015.5, does not transfer data from the metadata, only the focal length objective. Disappointment when you want to know what that lens you used. (It allows to rename the files but after you create a second copy. "It's an improvement.)

  Yes, copied files from Nikon NEF, DNG.

• I bought CS5 on a CD for a long time for my windows 7 PC and I now want to put on my new iMac Yosemite that does not have a CD player running. Can I download it from adobe or from the app store and use my original serial number?

  I bought CS5 on a CD for a long time for my windows 7 PC and I now want to put on my new iMac Yosemite that does not have a CD player running. Can I download it from adobe or from the app store and use my original serial number?

  You can use it only on a Win computer. If you had CS6, you could do a platform Exchange but not with CS5. Here are the details of the exchanges of the platform:

  Exchange a product for a different version of the language or platform

• Unable to delete the data from the Safari Web site...

  Hello.

  I need help with my Safari browser on my Mac.

  Im trying to remove all Web site data with the following procedure:

  Safari-> Preferences-> privacy-> Remove All Data Web site...

  His does not work. Before clicking on the button I have 108 Web sites stored cookies or other data, I click the button, and nothing happens... I'm still 108 cookies.

  I also did the following:

  . - activate the Menu developer and Cache empty and tried again... nothing

  . - used CleanMyMac v3 and it says I don't have cookies.

  . - order iCloud Sync of Safari on the computer and try again... same problem

  . - removed manually com.apple. Safari. Secure

  Any help will be great. Please let me know if you need any additional info.

  Thank you.

  Hello DZanvettor,

  Thank you for using communities of Apple Support.

  If I understand your message that nothing happens when you try to remove the Safari Web site data. I know how it is important for you to be able to remove the Safari Web site data. I recommend that you restart your Mac into safe mode and see if you can remove the data from the Web site in secure mode.

  Here are the steps to restart your Mac in safe mode:

  Safe mode (sometimes called secure boot) is a way to start up your Mac so that it performs certain checks and prevents certain software from loading automatically or opening.

  From your Mac in safe mode does the following:

  * Check your startup disk and attempts to fix problems if necessary directory
  * Loads only required kernel extensions
  * Prevents the elements start and the login items open automatically
  * Disables installed user fonts
  * Delete font caches, hiding the kernel and other files of the system cache
  * Together, these changes can help resolve or isolate issues related to your startup disk.

  Follow these steps to start in safe mode.

  1. start or restart your Mac.
  2. as soon as you hear the startup tone, hold down the SHIFT key.
  3. release the SHIFT key when you see the Apple logo appears on the screen.

  After you delete data from the Web site in safe mode restart your Mac and allow it to start up as usual. Then test the issue again.

  Best regards.

• New iPad: restore the data from the old iPad, but...

  I got a new iPad. I have already backed up my old iPad to iTunes and wanted to put in place the new iPad to restore this backup data. BUT when I connected to iTunes, I've learned that I have to update the operating system first. He wouldn't let me NOT restore from backup! I had to set up as a new iPad.

  So, I did the installation of the new operating system. But I have a lot of applications and data from the old iPad I want on the new iPad. How can I quickly transfer these data? I have found no method to restore the backup of the old iPad now since. Frustrated!

  Follow the directions here: https://support.apple.com/en-us/HT203434

  Basically, now that iOS is updated you need to clear the iPad and then you can restore from a backup. -AJ

• acquire data from the oscilloscope DPO2024

  I am trying to acquire data from the oscilloscope DPO2024 using labview. I am able to do, but my vi file only works for channel 1. Other than channel 1, it does not work and instead, it changes the adjustment of the oscilloscope as well. Find the vi files attached.

  Any help is very appreciated.

  You must connect the channel in the waveform of reading.  It is default to channel 1 if thread continues.

• Store data from the Serial Port in the buffer and then take action?

  Hello! Everyone,

  I'm new to LabVIEW and I take assistance from various videos and stuffs available online to get started with LabVIEW.

  But I have a duty, therefore needing help.

  initially I see some of the tutorial videos and learned about the LabVIEW interface, and does a little project to communicate with the Port series (receiving and sending data).

  Happens to my task.

  My LabVIEW application will send a few State request packets on my device or control and based on the response packet that I have to display values.

  The Structure of package is as

  Header, length, Op_Code, data Checksum

  There is no terminator as newline or carriage return or anything else.

  In C language, I read the data from the Serial Port, and based on the length, I conclude that I got the full package or not, and then by recalculating the checksum value, the integrity of the package is verified and then based on that Op-Code has been sent will be decided.

  (I'm dealing with hexadecimal data)

  But how can I do this in LabVIEW.
  A tutorial or any referece will be useful for me.

  1. I suggest that you learn to use Shift Registers instead of local and global variables.  They are much more efficient (memory and execution speed) and make it much easier to read the schema.

  2. you don't need this inside the loop property node.  Is there a way to configure a Serial Port to turn off the stop character.

  3. you don't need to wait for playback VISA will limit the rate of loop if no data is coming.

  4. Once you have the length, you simply read the rest of the entire message and process it at a time.  This will make things a LOT faster.

  5. you should really do this enum a def type so that you can ensure that all your enum constants have the same values.  If you need to add a State later, simply update your enum in the same place then.