Instructions within a packet can refer to the links in the database

Similar Questions

• How can I start the database without using crsctl? ~ Xev

  Hey guys, it's Xev.

  I'm trying to recover cancellation based, and when I try to put the database to mount with sqlplus, it won't let me.

  How to use srvctl to put the database in a mode of editing?

  I stopped the entire stack of crs on both nodes, but I'm not clear on how to assemble the database now to the CCR?

  Thank you

  Xev.

  Xev Bellringer wrote:

  Ho Toby, when I try this command, srvctl start db d db_unique_name o mount

  It gives me the following two errors:

  PRCD-1027 unable to recover the RAC database

  RPRC-1070 has been unable to verify

  I have the GRID_HOME of source and I use root of course srvctl start because it is in srvctl.

  I have crs stack while I do this? If yes how do I start the CRS battery without the database?

  Hi Xev

  On this step, I'm assuming that you have defined cluster_database = false and have stop the CRS.

  Remember: -.

  1 take a full backup still running (assume that you already have).

  2. make cluster_database = false, before starting the recovery.

  3 went parallelmediarestore the RMAN parameter, because it can slow down the recovery process.

  4 restore the db.

  5. you start db.

  6. set cluster_database = true.

  7. stop your db in normal mode, immediate.

  8. start your database by srvctl

  Good luck...

  Concerning

  Jihane Narain Sylca

• Scipt OpenScript/Bank of data/hand scipt:Second used can not find the database file

  Hi all
  
  I want to palyback a main script containing three "scripts", two of them are the same script. Separately, they all can read successfully.
  For example, in the script 'Hand', there are 'A' 'B' 'A' script ssuccessively. and 'A' 'B' have their own databases respectively under "a data bank / ' and ' B/database /. Each database has two records in the .csv file.
  Now I'm reading 'Hand', the script of the child 'A' can run successfully then child script "B" run correctly too, but the second, run the script "A" says more no record and the main script to stop there.
  
  So, how can I do the 'Hand' performance full script without being stopped by the second script used 'A'?
  Thanks a lot for your help ^ _ ^!
  
  Kind regards
  Angyoung

  Hello

  Mention the database settings in initialize(), IE.

  public void initialize() throws Exception {
  ........
  getDatabank("DBAliasNAme").changeSettings("startindex=1:whenout=STOP_USER");
  .......
  }
  

  Kind regards
  Dembélé M

• Can not copy the database of res folder and write to the memory card

  I developed a small application using blackberry jde 7.0. I want to copy the database (.db) of res folder and write to the memory card. When I run in the Simulator, it throws exception "FileNotFound". But the file is located in the res folder.

  Help me guys...

  Here is the code

   copyFile("/Demo.db","file:///SDCard/Databases/Demo.db");
  

  //Copy to Memory card
  public void copyFile(String srFile, String dtFile)
  {
  try
  {
  FileConnection fconn;
  fconn = (FileConnection) Connector.open(dtFile,Connector.READ_WRITE);
  //if(!fconn.exists()) // if file does not exists , create a new one
  // {
  // fconn.create();
  // }
  InputStream is = (InputStream)getClass().getResourceAsStream(srFile);
  System.out.println("read" + String.valueOf(is.available()));
  OutputStream os =fconn.openOutputStream();
  byte[] buf = new byte[is.available()];
  int len;
  while ((len = is.read(buf)) > 0)
  {
  os.write(buf, 0, len);
  }
  is.close();
  os.close();
  }
  catch(IOException e)
  {
  System.out.println("Exception"+e.getMessage());
  }
  }
  

  The exception is

  File not found

  «When I run in the Simulator he throws exception "FileNotFound".»

  Which line is the rise of this?

  You might find the code in the sample application SQLiteDemo, which does almost the same thing, useful in the study to determine what went wrong.

• I've updated to Lightroom cc and now I have problems with permissions... How do I rectify this? I followed the instructions online, but I can't change the preferences folder permission to read and write.

  Help, please! I updated Lightroom CC through the creative cloud and now lightroom will not organize the citing on 3 files permissions issues. I tried to follow the instructions to manually fix the issue but I can't change my permissions on required files. IM using an iMac with OS El Capitan.

  Salvation without flinching,

  Did you apply permissions to all items included for these files to Adobe?

  Apply permissions to all items in a folder or disk

  1. Select a folder or disk, and then choose file > read

  2. click on the lock icon to unlock, then enter an administrator name and password.

  3. click on the pop-up menu Action , then choose "apply to the included items.

  and you also have to give all the permissions to the Adobe User Library folder (~ / library) as defined by miguana in the initial post.

  Reference article: 6.4 CC 2015.4/Lightroom Lightroom, Photoshop or bridge hangs or crashes at launch

  Kind regards

  Claes

• How can I recover the database Windows Live on Windows 7?

  When I try to open Windows Live Mail on Windows 7, it does not open and displays a message that it is recvering windows

  current database, then a message that windows live has stopped working and the system hangs until I have shut down the message.

  Hi BillyReed,

  You can consult the following Windows Live support link and check if it helps:

  http://windowslivehelp.com/searchresults.aspx?query=unable%20To%20recover%20Windows%20Live%20database%20&ProductID=15

  If you still experience the problem you can post your request in the Windows Live forum for assistance.

  Check out the link:

  http://windowslivehelp.com/product.aspx?ProductID=15

  Hope this information is useful.

• can I recover the database to a different database

  Hello

  I had to drop a full Oracle database and install it as a new. The Id of the new database is now other than the former. I want back the old Rman backup with all recovery logs, datatafiles...

  Is there a way to do with rman?

  Kind regards

  Siegwin

  Hello

  Check the ORACLE - DBA tips corner

  HTH

• Is 10.2.0.4 OWB can connect to the database version 11.2

  We have a new source of data which is a 11.2 database oracle. We use currently OWB 10.2.0.4 connection to our other 10.2.0.4 database.
  
  OWB 10.2.0.4 can connect to a database of 11.2? When you configure a connection only allows an option for 11.1?
  
  Have we not upgrade our OWB 11 g to enable us to establish a connection to 11.2?
  
  Edited by: user13768053 may 4, 2011 06:29

  Hello

  Connect to Oracle 11.2 to OWB 11.2
  OWB 10.2.0.4 can connect up to max Oracle 11.1

  Thank you
  Fati

• downloaded updates of files can I delete the installation packages to free up disk space

  After having been to the bass and installed, can I delete the installation packages to free up disk space
  and how?

  This problem may occur if the Windows Update software distribution folder has been corrupted. We can refer to the following steps to rename this folder. Please note that the file will be re-created the next time we visit the Windows Update site.

  I. close all open windows.

  II. click on the "Start" button, click "all programs" and click "Accessories".

  III. - click on "command prompt" and click "run as administrator".

  IV. in "administrator: command prompt"window, type "net stop WuAuServ" (without the quotes) and press ENTER. "

  Note: Please, look at the cmd window and make sure that it is said that it was successfully stopped before we try to rename the folder.

  V. click on the Start button, in the "Search" box, type "%windir%" (without the quotes) and press ENTER.

  VI. in the opened folder, find the folder named "C:\Windows\SoftwareDistribution".

  VII. right click on the folder, select Rename and type "SDold" (without the quotes) to rename this folder.

  VIII. while still in the "administrator: command prompt" window, type the command "net start WuAuServ" (without the quotes) in the opened window to restart the service Windows updates.

  Note: Please, look at the cmd window and make sure that it is said that it has been started.

  Reset.

  UTC/GMT is 12:31 on Tuesday, October 25, 2011

• iwhy can't do the window update

  Im trying to do an update on internet butis impossible to do.

  could you please help me on this.

  Thank you

  Windows update no longer works if you don't have XP SP3 installed. To check your level of service pack system, click on start, run and type "Winver" in the Run dialog box and click on 'OK'.  If your system already has XP SP3 installed, you can try reset the windows update components by referring to the link below.

  There are Prerequisites for the installation of Windows XP SP3. You can find them by reading the link below.

  Steps to take before installing XP SP3.

  http://support.Microsoft.com/kb/950717

  How to reset windows update components.

  http://support.Microsoft.com/kb/971058

  If your system does not already have SP3 installed, you can:

  Download and install XP SP3 fron the link below. (Ignore the warnings on THIS subject the professionals and network facilities).

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Windows XP SP2.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=28

  If you encounter problems installing XP SP3, you can refer to the procedure described in the link below to resolve an installation failure.

  How to troubleshoot a SP3 Installation fails.

  http://support.Microsoft.com/kb/950718

  Let us know if this is useful to provide feedback. Good luck.

• How can I change the time Scripttimeout or IIS on my computer?

  I'm trying to access a database on the internet. I can get to the database, but when I try to watch it I get an error message telling me a timeout exceeded and I received instruction to change the ScriptTimeout or IIs on my computer.

  Hello

  The question you posted would be better suited in the Forums of the ISS. I would recommend posting your query in the Forums of the ISS.

  http://forums.IIS.NET/

• I can't do the system restore and I have nothing on my "All programs" button, which means that I have not accessories, System Tools, etc. How can I get that back?

  I can't do the system restore and I have nothing on my "All programs" button, which means that I have not accessories, System Tools, etc. How can I get that back?

  Hello CalebCox,

  I suggest that you try the methods below to resolve this issue.

  Method 1:

  This problem can be caused due to infection by the Virus. I suggest that you run a virus scan on your computer using Microsoft Safety scanner and check if you have the same problem.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Check if you have the same problem in the new user account.

  You can refer to the link below, which will give you information on how to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

  If works, you can copy data to the new user account:

  http://support.Microsoft.com/kb/811151

• How can I recover the files and programs before a system restore? my document folders are all empty and my programs will not open!

  How can I recover the files and programs before a system restore?  my document folders are all empty and my programs will not open!

  I know they are there and hidden somewhere, but this restoration took my settings of the computer to 2004! We lost all our data, our software that we use to operate our company at home, our quickbooks that has all our financial data, family photos, videos, Outlook will work not so no e-mail, all turned in time and 6 years ' worth of documents have disappeared.

  What happeneded was that I was trying to upgrade to quickbooks software when I got an error, I cancelled out of the facility, then restarted and that's when I got an error hal.dll something? I thought about a system restore would allow me to go back in time to just before when the error occurred, but he basically took my computer back to factory settings, so all the programs that I installed and paid hundreds of dollars for the past six years has disappeared, Microsoft Office and very expensive construction estimating software that we wil have to pay once AGAIN for If I can't get this program working properly.

  I am a fool! I can't believe what's happening.

  Someone at - it instructions on how I can retrieve either the programs and data that I need specifically or how to go and seek shade from the files I read online on and restore my computer for about 12 hours ago?

  Thank you all!

  Sally in Georgia

  Looks like you did a system rather than a system restore recovery.  If you have inserted a disc supplied with your machine and booted from it, you probably erased the disc and installed the original operating system provided with your computer.  Usually, a step in this recovery is to do a full format or quick of your drive.  If you did a full format, your data is permanently lost.  With a quick format, your data may still be there, somewhere but inaccessible by normal means.  Applications must generally be installed, in order to recover the files probably will not help unless you have the original installation media.  Your other data files (images, videos, financial data) may be salvageable, but at this point, it would be advisable to take your computer or your disk to a business/professional who is experienced with data disc recovery.  It will be cheap and there is no guarantee.

  Impatient, remember investigate you a backup strategy for your computer and critical data.  Hard drives can go wrong with little or no warning.

  HTH,
  JW

• Can not find the script VB script 'engine' script "C:\Program Files\Verizon\IHA_Message Center\Cmd VBS.vbs"

  Appears intermittently.

  Hello

  (1) when exactly you receive the error message?

  (2) did you the latest changes on the computer?

  Method 1:
  a. click the Start button, type cmd. In the result of the research with the right button on cmd and select run as administrator.
  b. type cd %windir%\system 32 (Note: there is a space between the system and 32) and press ENTER.
  c. type regsvr32 vbscript.dll in the command prompt, and then press ENTER.
  d. type regsvr32 jscript.dll in command prompt, and then press ENTER.
   
  If the registration was successful, you should now see the following message is displayed:

  (3) the DllRegisterServer in vbscript.dll successful.

  Method 2: you can check the link below to run a SFC SCAN:

  http://support.Microsoft.com/kb/929833

  Method 3: you can refer to the link below:

  http://support.Microsoft.com/kb/555375

  Please respond with more details on this subject.

• I scanned my slides 35mm to the computer-how can I get the on a DVD?

  When I go to 'burn' it continues to "burn" photos on the hard drive of the computer, not to "burn" the DVD.  ??

  Hello

  1. don't you make changes on the computer before the show?
  2. you receive an error message?
  3. you use any DVD burning software?

  
  You can refer to the procedure described in the link to burn pictures to dvd.
  Burn pictures or videos to a CD or DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-pictures-or-videos-to-a-CD-or-DVD
  
  Check the link for more help:
  Disc burning: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/disc-burning-frequently-asked-questions
   
  For more information, see the following links:
  http://Windows.Microsoft.com/en-us/Windows-Vista/which-CD-or-DVD-format-should-I-use
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD