Instrument driver management

Similar Questions

• Incompatible Config Free and Wireless LAN driver/manager

  Hello

  The * ConfigFree 5.90.05AB *, available in the box drivers download MCE Satellite A100-498, is not compatible with the wireless LAN Manager * 12.4.0.0.3 * Intel PROSet utility (pilot * Intel PRO/Wireless 3945/4965/5100/5300 12.4.0.21.1 *), also available at the same place.

  When both installed, the * Conectivity doctor * and * profiles tool returns the error "+ cfmain.exe has encountered a problem and needs to close. "We are sorry for the inconvenience.

  Y at - it another version of ConfigFree that works with this version of driver/manager of wireless local area network? Toshiba released another version of ConfigFree?

  Best regards
  FilipeSilva

  .

  I saw your other link you are using Windows XP Home edition and now write you about WXP MCE.
  You mix this whole thing or what?
  What operating system you have installed?

  If you use WXP MCE (laptop came with MCE), please install all the stuff available for MCE. As far as I know all the drivers available for MCE are absolutely the same in the Toshiba recovery image so everything should work properly.

  Install WXP MCE and install all the stuff for MCE following order of good facilities. Believe me, that everything will work properly.

  Satellite A100 is old enough laptop model and I can't imagine that Toshiba offers incompatible drivers.

• OSX 10.11.2 on end of 2008 with the graphic card Nvidea Quadr 4000 MacPro is unable to open the Nvidea driver manager in System Preferences, CUDA work and updates. Any suggestions? Have tried to install updtyer Combi for OSX.

  OSX 10.11.2 on end of 2008 with the graphic card Nvidea Quadro 4000 MacPro is unable to open the Nvidea driver manager in System Preferences, CUDA work and updates. Any suggestions? Have tried to install Combi updater for OS x, the problem persists.

  If I remember someone else reported the same problem yesterday and Nvidia suggested to reinstall OS x. If yo boot into Recovery and reinstall without formatting nothing should be lost but backup before just I case.

• SMU Chassis or modules appearing does not in NI Instrument Driver Finder/connecte Intstruments

  New user, to debut with a chassis SMU-1073, controlled by a PC, with supply POWER 4113, 4145 SMU and 4071 modules DMM.

  I installed all the drivers from the supplied USB system and I can indeed see/control of the chassis and modules of NI MAX.

  When I try to see the modules Labview 2012 or 2014 (I'm looking for example VI to start) Instrument Driver finder does not show any chassis or modules.

  Looking for support OR but could find no generic "Here's how to start using this box OR $20,000 without flinching" first steps to help.

  So, I was hoping that it was a mistake and plug and play like the other instruments I connected and used. What I am doing wrong?

  

  Do not use the finder of the instrument. Use the help > examples of find and refer to material input and output. Be specific in listing of the drivers you have installed.

• [Microsoft] [ODBC driver manager] Data Source name not found and no driver by default specified

  Hi team,

  I am trying to connect to the Oracle 9i database using VB code below:

  strConnection = "Driver = {Microsoft ODBC for Oracle};" Server = SERVERNAME; UID = username; Pwd = PASSWORD"
  Connect = New ADODB. Connection
  Connect.Open (strConnection)

  The last line throws me below error:

  [Microsoft] [ODBC driver manager] Data Source name not found and no driver by default specified

  The VB code works well and able to connect to database server dev dev. The same script with the name of the UAT server does not work on server UAT.

  The servers are Windows server 2007-32 bit.

  When I checked the tab drivers in ODBC Data Source Administrator, dev server entry below:

  Microsoft ODBC for Oracle - 6.00.6001.18000 - Microsoft Corporation - MSORCL32.dll - Date

  Considering that the UAT server has entered below:

  Microsoft ODBC for Oracle-

  The Microsoft ODBC driver for oracle is listed in the tab UAT Server drivers, but did not have details of file version & dll. This driver is not installed correctly? If so, how the re install? Please help solve this problem as soon as POSSIBLE.

  Kind regards

  Tamil

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• How can I specify VISA as the interface of the wizard of IVI instrument driver?

  After a long hiatus and to reinstall on a new hard drive, I resumed an IVI driver development. Previously, when I experienced, I was able to generate a driver that uses the API of VISA.

  Now, on this new installation, when I start the wizard, the only choices I have are Gbspecifications FOR, serial and VXI (message and registry).

  How can I specify VISA?

  Hey Frog,

  As this measure Studio LabWindows/CVI Instrument Driver Developer Guide , VISA i/o interface is the mechanism through which the pilot communicates with the hardware of the instrument. The IVI Instrument Driver Wizard allows you to only select among GPIB, VXI and series more specify the interface for your instrument.

  I hope this information helps!

• Find the instrument Driver won't find 6070E vi

  I have trying to find vi that have been written for card PXI-6070E.  Some fundamental, as output 1 V out of the DAC1OUT.

  When I use "Find her Instrument Driver"... and interrogate National Instrument (company) and 6070E (additional keywords) I get no driver?  I remember being able to get to drivers before.

  Can someone help me please?

  Thank you

  Find the tool instrument Driver is for drivers of finding for instruments like scopes, DMM, power supplies, etc. The PXI - 6070E is a data acquisition card, so the examples it would be installed when you install the DAQmx drivers. You can find the examples in the example Finder (help-> find examples) and search for "DAQ" or see material input and output-> DAQmx folder in the menu tree.

• Driver Manager

  I uninstalled 'driver manager' option 'programs and features' on the Panel in error. I confused this is the source of a ToolTip that kept appearing on my screen and cause irritation. As you can gather I'm no computer expert, and now I like the driver manager is missing every time I start my pc. I don't know if I'm able to recover this, or if I need to download something. If I have to download something, what and where can I find? Any help would be greatly appreciated.

  Hello

  "DriverManager" is a 3rd party so that your description of this program is correct, we do not recommend to use your operating system, as drivers must always be obtained directly from the hardware manufacturer.

  Read about one displayed in these Forums with a very similar problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_programs/remove-drivermanagercom-software-thank-you-for/991b182f-e17e-49f5-9585-220fe107ce5f

  ____________________________________________________

  Follow these steps, as you probably still a boot entry remaining for her, which gives this error message that the program is more lies.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the problem persists after scanning, take these startup entries:

  "How to use MSCONFIG in Windows Vista"

  http://www.netsquirrel.com/Msconfig/msconfig_vista.html

  You can also use this free program to do, too:

  "Autoruns for Windows V11.32"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  See you soon.

• No sound from speakers. Driver IDT HD Audio CODEC link posible changed with the Norton driver manager.

  I read the other posts in this forum and took no measures not already as I could. Roll back the driver caused the blue screen of death. the pilot in the rear seat was placed on the blue screen. I lost the paper while trying to save my computer. Entertainment dv6-6140 of HP Pavilion PC. Remove the Chuck restores sound temporarily. Windows was created to replace a missing driver automatically causing the accident. It is set to manual now. Beats audio control says its startup file is missing and that it was the first symptom, followed by the loss of his. I have no silent films and would appreciate any help, as I am new to laptops and windows 7; Thank you.

  Dave67

  the Driver Manager installs a driver automatically but ill keep trying thanks a lot
  Dave

• my driver manager has stopped working, it does not support ordinary ordinary style, how can I solve this?

  my driver manager has stopped working, it says it does not support the regular style, how fix that and what would have made that happen?

  What driver manager?

  If this is the third part of drivermanager.com utility you should not use such utility, nor any who claim to "SpeedUpMyPc"

  All these utilities can in the trash worst case your system

• Windows 7 Home Premium loading of a new hard drive. Error 0 x 80070017, driver manager couldn't do.

  Windows 7 Home Premium loading of a new hard drive. Get error 0 x 80070017. Can not find the driver manager. How can I solve this problem and get Win 7 responsible?

  This is a new generation, the motherboard Intel DZ68DB Media Series for processor LGA1155 albums, office.

  I am a bit stuck!

  Check out this link

  http://search.Microsoft.com/en-us/results.aspx?q=0x80070017&x=11&y=8

  Good luck.

• Driver management has completed the process to add the HdAudAddService Service

  At windows 8, just upgraded to 8.1 windows and sound does not just work. I refreshed the pc, the sound seems to come back but then then after 10 hours, the problem came back use a toshiba satellite pro just 1 year and it is in perfect condition until I upgraded to 8.1 windows and this is the message that appears on the sound properties

  Driver management has completed the process to create the Service HdAudAddService of ID device Instance HDAUDIO\FUNC_01 & VEN_1002 & DEV_AA01 & SUBSYS_00AA0100 & REV_1002\4 & 9339 A 11 & 0 & 0001 with the following status: 0.

  Driver management concluded the process to install the driver hdaudss.inf_amd64_70c6945afa5f06b5\hdaudss.inf for the Instance ID of device HDAUDIO\FUNC_01 & VEN_1002 & DEV_AA01 & SUBSYS_00AA0100 & REV_1002\4 & 9339 A 11 & 0 & 0001 with the following status: 0x0.

  Method 1 worked 100% here!

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/driver-management-has-concluded-the-process-to-add/04857a5a-5c8e-4790-9D24-5f4c40591a0e

  YES!

  No need to uninstall my drivers!

  I worked in the Services and tinkered with him and he started etc but change for local totally worked!

  YES!

  Thank you!

• Link to MySql Error [Microsoft] [ODBC Driver Manager] Oracle database

  Hi all:

  I need your help, I want to access mysql oracle 11g R2 database. When I try to connect oracle database mysql database, I get the error below, kindly help your help will be appreciated, thanks in advance

  
  

  When I run:

  
  

  Select * from test1@mysqltest;

  [ERROR]
  

  ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:

  [Microsoft] [ODBC driver manager] Data source name not found and no driver by default specified {IM002}

  ORA-02063: preceding 2 lines of THAONT1. MYSQL

  28500 00000 - "connection between ORACLE and a non-Oracle system has sent this message:

  * Cause: The cause is explained in the forwarded message.

  * Action: See the documentation for the non-Oracle of the message system.

  My config

  Enterprise Edition of Oracle db:11.2.0.3

  OS: Win 7 64 bit

  bit ODBC: 64 for the MySQL Connector

  MySQL db:5.1.19

  ODBC configuration

  

  LISTENING PORT. ORA:

  =============
  

  listener.ora # Network Configuration file: D:\app\THAONTSE90151\product\11.2.0\dbhome_3\NETWORK\ADMIN\listener.ora

  # Generated by Oracle configuration tools.

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = CLRExtProc)

  (ORACLE_HOME = D:\app\THAONTSE90151\product\11.2.0\dbhome_3)

  (= Extproc PROGRAM)

  (ENVS = "EXTPROC_DLLS=ONLY:D:\app\THAONTSE90151\product\11.2.0\dbhome_3\bin\oraclr11.dll")

  )

  (SID_DESC =

  (SID_NAME = tst)

  (ORACLE_HOME = D:\app\THAONTSE90151\product\11.2.0\dbhome_3)

  (PROGRAM = dg4odbc)

  )

  )

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  )

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))

  )

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.12.1.58)(PORT = 1521))

  )

  )

  ADR_BASE_LISTENER = D:\app\THAONTSE90151

  TNSNAMES. ORA:

  ================

  TSTLINK =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))

  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.12.1.58)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SID = tst)

  )

  (HS = OK)

  )

  inittst.ora($ORACLE_HOME/HS/admin)

  ========================
  

  # This is an example of initialization file of the agent that contains the HS settings

  # necessary for the database to ODBC gateway

  # HS init parameters

  #

  HS_FDS_CONNECT_INFO = testmysql

  HS_FDS_TRACE_LEVEL = off

  # Required for the non-Oracle system environment variables

  ODBCINI value #= D:\ODBC. INI

  
  

  the dblink is created between oracle and mysql:

  ==========================
  

  SQL > create database public link mysqltest

  connect to thaont identified by abc123 using 'TSTLINK ';

  SQL > select * from test1@mysqltest;

  [ERROR]
  

  ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:

  [Microsoft] [ODBC driver manager] Data source name not found and no driver by default specified {IM002}

  ORA-02063: preceding 2 lines of THAONT1. MYSQL

  28500 00000 - "connection between ORACLE and a non-Oracle system has sent this message:

  * Cause: The cause is explained in the forwarded message.

  * Action: See the documentation for the non-Oracle of the message system.

  kindly help.

  Thank you and best regards.

  The error message '[Microsoft] [ODBC Driver Manager] data source name not found and no pilot by specified default {IM002}' explainind auto - DG4ODBC is not able to find the ODBC DSN you created.

  In your file init of gateway, you have set up the DSN: HS_FDS_CONNECT_INFO = testmysql

  And according to the administrator of ODBC in Windows screenshot, you have created a DSN called testmysql - unfortunately you created as a USER DSN. But DG4ODBC needs a SYSTEM DSN. The reasin why he needs a system DSN is that, by default the Oracle listener is running in the local system account. Therefore, when create you a USER DSN ODBC it can be access by the user who created it, but no one else can use it - and also not the local system account which serves as the Oracle listener. If you need to create a system DSN that each user on this computer can use the DSN (including the local system account).

  -Klaus

• [unixODBC] [Driver manager] Impossible to drive on SQL_HANDLE_HENV SQLAllocHandle

  Hello
  
  I installed the ODBC driver to connect to MS SQL databas (2008) Oracle database 11 GR 1 material on 64-bit linux. I downloaded and installed
  
  in accordance with the instructions on the microsoft Web site:
  
  Microsoft.com/en-US/Download/details.aspx?ID=28160
  
  AFTE that I configured the DG4ODBC following note ID 561033.1. Here are the details of the files that I edited to configure.
  
  Listener.ora:
  ---------------
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = DG4ODBC)
  (ORACLE_HOME=/u01/oracle/fakieh/db/tech_st/11.1.0)
  (ENV="LD_LIBRARY_PATH=/usr/lib64:/u01/oracle/fakieh/db/tech_st/11.1.0/lib')
  (PROGRAM = dg4odbc)
  )
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP (PORT = 1511))(HOST = testdb.domain.com))
  )
  )
  )
  
  tnsnames.ora:
  -------------
  DG4ODBC =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = tcp) (HOST = testdb.domain.com) (PORT = 1511))
  (CONNECT_DATA = (SID = DG4ODBC))
  (HS = OK)
  )
  
  initDG4ODBC.ora ($ORACLE_HOME/hs/admin)
  --------------------------------------
  # HS init parameters
  #
  HS_FDS_CONNECT_INFO = mssql
  HS_FDS_TRACE_LEVEL = off
  HS_FDS_SHAREABLE_NAME = /usr/lib64/libodbc.so
  
  #
  # ODBC specific environment variables
  #
  Set ODBCINI=/home/oracle/odbc.ini
  
  
  #
  # Required for the non-Oracle system environment variables
  #
  #set < varenv > = < value >
  
  
  ODBC.ini
  --------
  
  [ODBC data sources]
  MSSQL = MS SQL Server
  
  [mssql]
  Driver=/usr/lib64/libodbc.so
  Database = FAKIH_ToTestInt
  LogonID = user
  Password = passwd
  Address = SJSQLV01.domain.com
  QuotedId = YES
  AnsiNPW = YES
  HS_FDS_SUPPORT_STATISTICS = FALSE
  [ODBC]
  IANAAppCodePage = 4
  Trace = 0
  UseCursorLib = 0
  UseCursorLib = 0
  
  
  
  Tnsping is successful, but when I try to connect the remote db it gives me the message below.
  
  SQL > select * from 'systables"@mssqltest;
  Select * from 'systables"@mssqltest '.
  *
  ERROR on line 1:
  ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:
  [unixODBC] [Driver manager] Impossible to drive on SQL_HANDLE_HENV SQLAllocHandle
  ORA-02063: preceding 2 lines of MSSQLTEST
  
  
  Please suggest how to solve this problem.

  Just install an 11.1.0.7 bridge and looks that he does not accept the parameters of HS_NLS_NCHAR. I can't remember if for 11.1 a patch was required to operate.
  Do you see a chance to use the 11.2.0.3 bridge instead of 11.1.0.7? You can download the 11.2.0.3 gateway of My Oracle Support - look for Patch 10404530: 11.2.0.3.0 PATCH SET FOR ORACLE DATABASE SERVER

  and make sure you have chosen Linux x 86-64 bit.
  The bridge is part of the CD: p10404530_112030_platform_5of7.zip

  Download the ZIP file, unzip it on the Linux machine and install the bridge inot its own Oracle_home. Define its own listener and in your database location, change the entry in tnsnames.ora pointing to the newly created listener. then copy the init of bridge location 11.1 the 11.2 OH and test.

• project style instrument driver

  Hi all

  1. What is the advantage or the importance of the project-style Instrument pilot pilot instrument type LLB?

  2. in the event that the project file be located in the directory "C:\Program NIUninstaller Instruments\LabVIEW 8.0\instr.lib"?

  (My problem is if I use the driver to a location other than the mentioned directory, all the screws that are related to the trace showing C:\Program NIUninstaller Instruments\LabVIEW 8.0\instr.lib\Chroma ATE 6310)

  Please find the picture as an attachment.

  Can someone explain why this happens?

  Thank you

  Davidson

  Hi Nathan,

  Thanks for the useful link. Cool

  So if I need to get rid of the cross-connection, I need ( manually download) copy the driver to the C:\Program NIUninstaller Instruments\LabVIEW 8.0\instr.lib"directory.

  Thank you

  Davidson