Find the instrument Driver won't find 6070E vi

Similar Questions

• M30X bios does not detect the hard drive, won't start HD

  Can someone help me in this problem.

  My satellite m30x hard drive won't boot, rather trying to boot from the network.

  Tried to load the installer by default, and Hd will not appear on the settings

  tried original reistal toshiba software CD and the message that no target disk appears

  Is this really a hardware problem, some conection fisical damaged, or is it a bios problem

  Thanks in advance for some light on this problem

  My M30x has the same problem. I just used 2 months.

  I sent it to the repair center as I was told to do, because it has guaranteed.

  I'm still waiting for a response from them. I don't know what caused it.

• Impossible to select and place the Instrument Driver VI icons on the block diagram

  I am trying to automate some of the RF measurements using a Rohde and Schwarz Spectrum Analyzer. I downloaded the Rohde and Schwarz spectrum analyzer pilot named 'rsspecan' version 2.6.1 for Labview on Rohde and Schwarz site to use in my version of the software labview 7.1.

  I copied the files in the appropriate folders in the Labview software on the C drive files. I am able to access those files through the functions---> Instrument I / O---> range of Driver of instruments in the Labview diagram, but when I select the VI icon that I want to put, I am unable to place it on the block diagram. Instead of hovering under the cursor by clicking on the VI icon, by clicking on the icon of the VI has no answer whatsoever.

  Any help would be greatly appreciated.

  Thank you

  Thank you very much for the help.

  So, is there a way to get the above mentioned pilot online Spectrum Analyzer, which will be also compatible with LabVIEW 7.1, so that I don't have to go through the conversion of version Board?

  Thanks again,

  Vivek

• A 17 in the hard drive won't go in a 15-the macbook pro

  A 17 in the hard drive goes in a 15 to the macbook pro? both are about 6 to 7 years of age.

  There are two main sizes of the reader:

  Rated 3.5 "drives for desktop computers

  Nominal 2.5 "drives for laptops. Long ago, he must also worry about the thickness, but not for these two models.

• The camera driver won't install; all portable devices under Device Manager have yellow warnings

  Windows 7 64 bit

  All portable devices in Device Manager have yellow warnings.  I followed the directions of the driver reinstall paragraph each device status, but nothing has changed - warnings remain. Although warnings have existed for some time, I had no problem with the computer read maps or the connection with devices until recently, when a Canon camera wouldn't connect via USB or wireless because his driver would not move.  (The camera connects to my other Windows 7 64 x computer.)

  Running sfc/scannow a couple of times have mounted several corrupted files that could not be repaired: WUDFPlatform.dll, WUDFrd.sys, WUDFPf.sys, MsftWdf_User_01_11_00_Inbox_Critical.Wdf, WUDFSvc.dll, WUDFHost.exe, WUDFCoinstaller.dll, WUDFx.dll. The scannow report also stated that the same files under ' Package_1_for_KB2685813 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.1.11.2685813 - 2_neutral_GDR ' were also damaged.  Each file corrupted in both sets also said 'hash mismatch' at the end.  I tried to replace the corrupted with good files, but Windows won't allow.

  KB2685813 was apparently the above Windows Update. He appears twice on the same date (in November 2012) in the list of my computer for updates.  I tried to uninstall it, but get the message that the uninstall failed.

  Wudfsvc service is set to automatic, but it is not started.  It displays the message "unable to read the description. "Error Code: 193. In the Manager of tasks, under services, its status is "stopped".

  Any suggestions?  Thank you.

  Thank you.  I solved the problem more simply.  I learned live to access corrupted files (TrustedInstaller owned files and blocked any changes to them) and replaced by vouchers.  Now everything works.

  There is information online times how to change the owner of TrustedInstaller or anything else and then restore ownership to TrustedInstaller.

• With the help of NOR-5641R with FPGA and the instrument driver

  
  

  Hi Ran,

  I don't think what you describe is possible for two reasons.

  1. You cannot run the pilot bitfile instrument at the same time as a user defined FPGA bit file
  
  
  2. AO ports are AC coupled, so you will not be able to generate a DC bias on them.

• Pavilion DV9008DR Nvidia coprocessor SMU driver won't load

  After finding drivers almost everywhere, I met several for the 340 Nvidia nForce / GeForce 6150.  Some are for Vista (from HP), a set for Win7/Vista from Nvidia itself.  All have one thing in common.  The 'coprocessor' remains 'driverless' after the Nvidia installer is done.

  Looking at the PCI device ID, is seller 0x10DE (NVidia) device x 0271 coprocessor (nForce System Management Controller).

  The driver load without difficulty in XP, but the updated driver won't Win8.

  A thought has this load manually through Control Panel Device tool as an update of the driver selected with its .inf file.

  It is a driver that this continues to be a complete installation.  If it will not charge, what will be missing.

  Dan-

  I do not quite know compatibility mode, but I've done the following with the NVidia 15.49_nforce_winvista_win7_32bit_international_whql.exe driver package that is very similar to sp36079.exe

  1. launch the .exe.  As before, it loaded everything except the NVidia coprocessor driver.

  2. went to the Control Panel Device Manager

  3 find the coprocessor and went to properties-> Driver-> update driver.

  4. browse for the file SMU in the .exe 'burst' (including the .inf, .cat, .sys, etc.

  5A accepted.

  6. received the message that this driver installed.

  7. looked in Systedm devices and found nVidia nForce PCI System Management.

  8 looked the driver version and found it wasn't NVidia, but Microsoft, Date of 06/21/2006 driver Version 6.2.9200.16384

  If something happened, but no idea what it means.  (maybe the driver was already there, but need to Win8 "inviting them to find it?)

• I want to convert a former pilot of the instrument written for LV51.

  I found that LV 2009 will not open an existing instrument driver Fowler wrote in LV5.1.  I want to see the patterns of principle to a new driver to use with a FV Fowler MarkV Ultra indicator of figures who use their OPTO-RS cable.  The cable uses rs232 to communicate with a pc.

  I sent the instrument driver to [email protected].  Thanks for commenting.

• Windows does not recognize the DVD drive at startup

  Laptop: Dell E6410 ATG wt / verzion A15 Bios

  OS: Windows 7 SP1 with the latest updates.

  The question I have is when I log on Windows 7, the laptop does not recognize the DVD drive. The reader will not be displayed in my computer or Device Manager. I can get around this physically ejecting the disc and reinsert. If I do this drive appears in my computer Windows and Device Manager. It will read DVDs and CDs fine. I am able to reproduce the problem above mentioned question if I restart the laptop. If I restart the laptop the DVD drive won't be recognized and reinsert the drive will get it appears again.

  This problem occurs if I try a DVD - RW drive and an old DVD - ROM drive. If I go into the BIOS before windows, I can see the BIOS recognizing drives ok but not when initially get into Windows without having to eject and inserting the disc.

  Thanks in advance for any help.

  I guess that this must be a hardware problem then.

  Seems odd.

  The only other thing I can think of, after reinstalling W7, is a BIOS problem eventually. A strange setting it may be an older version of BIOS with a bug in it. If you decide to update the bios, make sure that you get the latest version for your make and model PC and follow the instructions. You can destroy a PC with bad BIOS or update the procedure.

• Satellite L305D S5895: Win 7 cannot find the HARD drive or cannot format the HARD drive on a clean install

  I have laptop Satellite L305D S5895 of the customer. It was delivered to me by the customer who tried to install Windows XP Pro, Vista and none would install.
  He said he tried all the CD that he had finally dropped on it and delivered it to me installation.

  When I got the score have been removed, so I tried to install Win 7 and when I do a custom install, I get an error indicating that the hard drive can not be formatted on disk 0 or it will give an error that no hard drives have been found.

  I have reset the bios default and no matter what I do, it won't format or find the hard drive. I was going to upgrade the bios, but the only way I found to upgrade the bios is once windows is installed.

  Everyone has ideas about this laptop so I can get a system installed. I checked the bios and there is no parameters for a sata, raid or IDE disk drive, so it seems that this version cannot be changed.

  Thanks for anyone who can help you.

  Rick

  Hello

  First of all it is an American notebook series.
  [Satellite L305D-S5895 | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=2144776& rpn = PSLC0U & modelFilter = L305D-S5895 & SelCategorie = 3 & selFamily = 1073768663]

  The laptop supports a processor AMD and ATI chipset.
  This means that the drivers SATA is part of the ATI graphics card driver.

  You must include the first SATA driver in order to install the Windows operating system.
  You could add the SATA driver for the Windows disk using software like nLite / vLite

  Welcome them

• SMU Chassis or modules appearing does not in NI Instrument Driver Finder/connecte Intstruments

  New user, to debut with a chassis SMU-1073, controlled by a PC, with supply POWER 4113, 4145 SMU and 4071 modules DMM.

  I installed all the drivers from the supplied USB system and I can indeed see/control of the chassis and modules of NI MAX.

  When I try to see the modules Labview 2012 or 2014 (I'm looking for example VI to start) Instrument Driver finder does not show any chassis or modules.

  Looking for support OR but could find no generic "Here's how to start using this box OR $20,000 without flinching" first steps to help.

  So, I was hoping that it was a mistake and plug and play like the other instruments I connected and used. What I am doing wrong?

  

  Do not use the finder of the instrument. Use the help > examples of find and refer to material input and output. Be specific in listing of the drivers you have installed.

• If I remove the hard drive from my Mac book will find my Mac still works

  One of my buddies and ME are supporting it because im trying to say that if you remove the hard drive of a Macbook, find my Mac no longer works, even if you get a new hard drive and connect it to the Internet. He said, that it only stops working if it is not connected to the internet, and I know it's true, but I want to know if my theory is correct,

  If you remove the HD there is nothing to identify your Mac then FindMyMac.

  To use FindMyMac the Mac must be connected to the internet and FindMyMac must be enabled in system preferences > iCloud. This requires Mac be signed in iCloud.

• Is - this time machine back up the record of the iCloud drive in the Finder?

  Background: I recently started using iCloud drive on my iMac with OS X El Capitan 10.11.5. I also continue to use a 3 GB CAP to automatically back up my computer using time machine.

  Discussion: I copied some files more in player iCloud (under Favorites in the Finder) folder to appear on my drive to iCloud. Obviously the synchronization service iCloud provides is great, but I want to that I am also able to backup these files on my time capsule as well for peace of mind, and it would be a nuisance if I constantly have to move files out of the iCloud drive to another location on my computer to make sure that the files are also backed up regularly on the time capsule.

  Question: Time Machine also backs up everything (all types of files - excel, pdf, word, etc.) that I added in iCloud drive folder on my computer?

  Thank you!

  Yes. Time Machine back to iCloud by car, but not where you'd expect.

  Look for the path below in your Time Machine backup...

  

  It's YOURdriveNAME > users > YOURaccountNAME > library > mobile Documents > com-apple-CloudDocs

• Find the Audio driver for HP dc7600 convertible minitowers PC for Win7

  Dear all Member,

  I have two HP dc 7600 and computer in minitour convertible HP dc 7800 PCs, recently I upgraded the old OS win XP of them for the new OS Win 7, I'm looking for drivers for Win7 in here, but until now, I couldn't find the Audio driver for Win 7.

  Some audio that I found them on the web for HP to be compatible with Win7 drivers, but they are unsupported when I installed them on my computer.

  You help me by sending the right link to download the Audio drivers for Win7 on HP dc7600, dc7800?

  Thank you very much.

  Chinh_Ng.

  Hello:

  For the dc7600, the best thing to do is to go to the realtek website and download and install the latest driver for the audio.

  Accept the agreement. Download and install the driver either the 1st or the 2nd on the list depending on whether you have installed W7 32-bit or 64-bit.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 24 & PFid = 24 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

  I have a dc7800 CMT and I used the audio driver from the support page and driver and it worked perfectly for me, so I can't help you there.

  I used the one on the link below.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 12454 & prodSeriesId = 3459240 & prodNameId = 3459243 & swEnvOID = 4059 & swLang = 13 & mode = 2 & taskId = 135 & swItem = vc-75954-1

• I have blown my motherboard on an old computer and hooked up my old hard drive to the new computer and want to transfer my favorites on the new drive but cannot find where they are located on the old drive - any help?

  My motherboard went bad on my old computer, but the hard drive was OK. I bought a new computer and plugged my old hard drive to it via a usb adapter. I would like to import or copy my favorites from the old hard drive to my new, but I can't find where they are. I was unable to determine the search for articles on the web. Be advised that my old hard drive is basically nothing more than a place of storage for files at this point. My old operating system is windows XP, and my new system is Windows Home Premium.

  https://support.Mozilla.com/en-us/KB/recovering+important+data+from+an+old+profile

  Your old profile is located here in Win XP and W2K:
  
  drive: \Documents and Settings\username Windows login\Application Data\Mozilla\Firefox\Profiles\profile_name