"Insufficient content for edit" Error Message
First, when to perform a three point edit, I'd get a box of dialogue "Fit Clip" who asked me if I wanted to 'ignore the Point Source', 'Point Source output ignore', etc. Usually, I take the same option so I checked the box that says "use this choice." If a change does not exactly match the settings I set universally, an error pops up saying: "insufficient content for edit.
I can't find a way that cancel without wiping my own settings. Is there a way to bring this initial dialog Save? Thank you, all.
I've never seen this error before. I guess that screendump is not yours?
There is a checkbox under general in the preferences.
Tags: Premiere
Similar Questions
-
1 results for "WindowsUpdate_80070436" error message
1 results for "WindowsUpdate_80070436" error message
Hey Collin,.
Are you sure have the error code correctly written? I know really 80070643, but not 80070436.
Can you check again to make sure that the code is correct above?
If the error is indeed 80070643 please check the post following if the update which is a failure is related to .net Framework:
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/ffd451e3-c1d8-4971-92f2-6f00236eeaf3
Thanks, if you find my answer was what you are looking for, please do not forget to click on the box "mark as answer" below!
-
Cannot download 10 windows XP and IE 8 security updates from microsoft windows update site. for all error messages are 0x800700D or 0 x 8007002. Please help thanks.
Thank you.
Hi Pauli,
See following documents to troubleshoot Windows Update error 0 x 8007002 & 0x800700D (scroll down to section fix it myself ).
-
The community edition error message sign
I get error message there is no document template for the e-mail (Adobe ID) you provided. Please contact [email protected]. when running Adobe Community Publishing (Beta), I can't sign in.
Hi, Bojan,
I apologize for the confusion this has caused. We have removed the Community Publishing application. You can no longer use the AIR app on your computer to create and edit documents.
All of the content that you have created will still be available on Adobe.com.
Kirsti
Community team help & Learning
-
I have a model DW (CS3) that gives an error message when you try to create a new page using the template: "you have made changes to the code that is not marked as editable. If you keep these changes, they will be lost the next time you apply a template to this file. You want to keep the changes from here?
This message is displayed as soon as you create the template page and save. I see the cursor in the code view and it clearly starts inside editable tag. I have same crreated an alternative model from scratch and still get the message.The page is valid. DW error on min-height of a div element in the css file, but it isn't an impact of the browser that uses my business (it is an internal site).
I did some more tests with the creation of pages and update the model to see if changes are pushed out and it seems to work fine.
Thanks for the help.
-
Cannot install Office Ultimate 2007 due to the editing error message
Description of the problem: I have a desktop computer that I built from a kit of WGA (Windows XP Pro with Service Pack 2). This machine is an AMD based system and I had installed SP3 that caused a problem without end. I did a fresh install of XP and you have not installed SP3. This machine has everything installed at the origin of the office suites. I bought an Office 2007 Ultimate on m6mobile.fr store and tried to install it but always comes an error message: "Setup error: the language of this installation package is not supported by your system." I tried to install the software on a second DVD player, but I get the same error. I tried to install the software on my Sony Vaio laptop and it seems to install without any problem but I did not install, I just want to check if the software disk is defective. The laptop has XP Pro SP2 also. Any information or assistance be will greatly appreciate.
I could solve this problem by copying the contents of the disc on my c drive, open the folder and clicking on Setup.
-
Need to have a different label for af:inputText as for the error message
Hello
Jdev version 11.1.1.7
In a form, I have a label for the af:inputText as a statement and not the name of the attribute.
But when the error message is highlighted in field 2, by clicking on 'All', all error messages come in a pop-up window where I NEED TO DISPLAY the ATTRIBUTE AGAINST THE EACH ERROR MSG instead of THE REAL GIVEN to THE AF:INPUTTEXT LABEL. Please suggest an idea.
Kind regards
Ramey
Try to follow these steps:
1 - in the inputText label sets the label that you want to display in popup error.
2-set inputText simple property to true.
3 surround inputText by af:panelLabelAndMessage and set the label property of the label that you want it to be viewable in the page.
-
How to check for recent errors/messages?
Is there a way to check the recent error messages? I seem to have a problem with my screen. I came back to my computer that was slowed down, so I clicked as usual to wake up. Some message came down to right on something to do with the screen, and then it disappeared before I could note what it was. Now my screen seems to be pushed over to the left a little cut elements on the screen.
So is there a way that I can know what was this message that came? It's kind of irritating me because I always just go back to the computer and click on the mouse to open the screen up. Now, I have a problem, at least I think that the screen has evolved to the wire, it does not resemble the normal.
Hello
Windows Control Panel, open administrative tools, and then open the event viewer. Let this load, then open the Newspapers Windows entry in the top right of the window. The event you are looking for will be under the System or Application logs.
However, the best way to solve this problem would be to run the Windows system restore. If you have Norton Internet Security installed, you should disable Norton Tamper Protection as described in step 2, on the link below.
http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20091112171719EN&LN=en_US
Once you are done, turn off the PC. Windows system restore is usaully better run in Mode without failure. Tap away at f8 that you start the PC to enter the Windows Recovery Console. Use the arrow keys to select Safe mode and press ENTER. When it has loaded, on the Start Menu, click principally made programs, accessories, click System Tools and run the system restore. Choose a restore point prior to the issuance of the display and then proceed to the restoration. When you are finished, Windows will restart normally.
Best wishes
DP - K
-
No photos or videos not found for import error message
After updating lightroom 2015.2 it was crashing
I have done the changes in preferences, add photos, without control, graphics disabled even deleted my plist file
I use playmemories to copy images from my camera in my folder. I simply tell LR to synchronize this folder. problem is that it detects, there are 47 images to be synchronized, I see the progress bar... I get the error message saying nothing?
which go beyond this error?
If I use LR to import my photos I don't have the same control., he puts them in the wrong places, losses fodler structore with the dates that the camera generates. I want to keep what LR seems to not be able to copy. so why I use 3rd party app to copy files and lr simply synchronize. doing it like this for years. now I can't not
Our team of engineers working on a fix for this problem. Until then, please use this workaround:
Enable the option "Show import dialogue before you import" during synchronization of folders, and then select the subfolders to synchronize subfolders menu in the import dialog box.
Source:-sync folder fails with the error ' no photos or videos not found to import "
Concerning
~ Assani
-
AdobeSend provide for most error messages
I pay and that you try to use AdobeSend but it gives me error messages, most of the time and are not sent but a few PDFs at once... Any suggestions?
You can make reference to: why my shipment of adobe has continued to send links, when I try it gives a socket 995 (not found) error message
You can also contact Acrobat support for this
FREQUENTLY ASKED QUESTIONS | Adobe Send & Track
Concerning
Stéphane
-
Installation for the error message for the Fund
Hello
Can someone tell what is the condition prerequisite/configuration to make the error message to display when the created purchase order does not have sufficient funds to cover the PO commitmentHello
We believe that you have found this error checking of funds coz... An audit of the Fund determines if there are funds available for the requisition according to the budget there is place and if the cost is deductible. If funds are not available for the requisition, the applicant will receive an immediate notification that the funds are not available, and the request cannot be processed.Could you please check the profiles, 1) POR: allow funds to check, it is defined as "Checkfunds"?
(2) PO: Substitute funds reservationS.P DASH
-
Captivate 5 edition error message: not enough memory
Hello
I am during the test program for use in our society, and I fight about this error message in Captivate.
I ask the question here in hopes that someone has an idea if this error message is a problem of my workstation, or an Adobe Captiva 5 problem:
This message occurs when to publish the swf file, after compression and insertion of labels of swf file, and save the swf file (according to the messages in the progress bar from publish window).
The project conditions
- 20 slides
- Each slide contains about 5 s of captured full motion video and audio
- 10 text captions, some zoom and 3 text animations
I use
- Adobe Captivate 5 (test)
- Windows XP SP3 (Dell Latitude E6410, Core i5, 4 GB RAM)
Tried to change some settings, close the programs, restart. Still the same message.
This isn't a real system, old or weak. I use other programs successful here with huge images and videos, and of course I get an upgrade of the company's computer for that, this post is the last chance for the program...; (o)
Thanks for all the ideas...
Ulrich
Try to uncheck the options in preferences > SWF and the quality of compression SWF size and see if that allows you to publish correctly. Sometimes one of these preferences can trigger this type of error on a given hardware configuration. First of all try to uncheck both, so if it works, try to tick, one at a time to see if any compression option is open to you.
-
I made a movie of 30 minutes or more in WMM, some of the videos that I imported I had to convert to wmv, to import into WMM. Once I went to publish the movie, after the publication of about 1%, an error message pops up saying something like "cannot publish to the specified location. Check the source files and the location is still available and that there is enough disk space. "I have 8 GB of free space on my hard drive and I tried to burn a cd on a dvd, and save to memory stick, none of them have worked, the same message is displayed even if they have sufficient space available. There is no red x in the videos or photos that I imported, so no files are missing. Some files have been moved when they were converted, but the movie plays well in WMM. I want to export to is in my documents is therefore always available. I spent hours trying to figure this out and I I still don't know what the problem with it! Help! I've also spent a lot of time to their conversion to avi to see if this helped and the same message appeared again.
What is the format of your source of debtor files and how did you convert
TO WMV?I can only imagine that you are using Vista Movie Maker 6?
It's not really about the location... error messages can be very cryptic...
The error that you mentioned usually appears when the source files in the project
are damaged or are not fully compatible with Movie Maker and made
in a movie file cannot continue. In addition, large complex projects can cause
in this issue.In some cases, it may be possible to record in DV - AVI, during registration as
. WMV fails: the following article explains how to save... Publish it in film...
6 machine and the graphic link shows where the option:Windows Vista - publish a movie in Windows Movie Maker
http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-MakerThe following chart shows where the DV - AVI option.
http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpgIf the recording as long as DV - AVI fails... see the following articles:
Movie Maker - problem resolution - "cannot record a movie.
http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.htmlWindows Movie Maker error
Cannot complete the Save Movie Wizard
http://moviemakererror.blogspot.com/Several formats are apparently compatible with
Movie Maker, but the most reliable choices are:Photos - bmp
Video - wmv
Audio - wav, wma, wmvSometimes, it can help if you are going to... Tools / Options / Compatibility tab...
and uncheck all filters. -
What is the reason for this error message?
Why did I get this error message?
ArgumentError: Error #2025: the supplied DisplayObject must be a child of the caller.
at flash.display::DisplayObjectContainer/removeChild()
at pdresses_fla::MainTimeline/releaseabout()script
Stop();
var imageLoader4:Loader = new Loader();
var image4:URLRequest = new URLRequest ("img1.jpg");
imageLoader4.load (image.4);
addChild (imageLoader4);
imageLoader4.x = 300;
imageLoader4.y = 30;var imageLoader4x:Loader = new Loader();
main_btn.addEventListener (MouseEvent.CLICK, myClickReaction4a);
function myClickReaction4a (e:MouseEvent): void {}
var image4:URLRequest = new URLRequest ("img2.jpg");
imageLoader4x.load (image.4);
addChild (imageLoader4x);
imageLoader4x.x = 300;
imageLoader4x.y = 30;
}back.addEventListener (MouseEvent.CLICK, releaseabout4);
function releaseabout4(evt:MouseEvent):void {}
removeChild (imageLoader4);
removeChild (imageLoader4x);
gotoAndPlay (5);
}In the releaseabout4() function, you have two calls removeChild. When it is called imageLoader4 or imageLoader4x is not on stage, and so you get the error. You can use contains to ensure that it is in the container before trying to remove it:
function releaseabout4(evt:MouseEvent):void {}
{if (Contains (imageLoader4))}
removeChild (imageLoader4);}
{if (Contains (imageLoader4x))}
removeChild (imageLoader4x);}
gotoAndPlay (5);
} -
What is the remedy for the error message "could not open the file mapping.
When I start it, I get the message "filed to open map files. What is "mapping files" and how do I correct that?
Hello
If I understand correctly when you connect to your Windows XP computer the message
"Cannot open the file mapping" on the screen, is that correct?Please provide some additional links for a better understanding of the issue.
1. don't get this error when you start a program? Or is it random?
2. What were the recent changes of hardware or software that are performed on the computer before the question?
See also this Article on TechNet on the mapping of XP files among users. (Settings / / install to disable the mapping file)
Maybe you are looking for
-
What is the purpose for the icon, WebIDE or Web | OF and what is its role?
This icon has just shown with my other icons next to my search bar. It's a circle covered in the grid with a picture of pencil lines or the stylus in its lower left corner area. I don't know what it is or what happens if I click on it. [Oops, I click
-
Yahoo images won't load is not properly in FireFox
I can get the images/links to load correctly in other browsers, but if I do an image search on yahoo with Firefox, I click a thumbnail and page in the picture changes. But, if I try to click on the link to go to the actual page of the image is on, th
-
Buy Windows 7 with all the drivers?
Is it possible to purchase Windows 7 at Toshiba with all the drivers of Toshiba laptop for some?
-
Sorry if this seems a simple question but I'm limited in my exp. labview I try to get a value of byte hi.lo but can't seem to figure this simple thing. I know that labview has a feature, but I am limited to the functions of the NXT toolkit which supp
-
Windows Vista Edition family PreimumService Pack 1 (KB936330)
I reinstall my OS (Vista Home Premium 32-bit). I have problems with the installation of Vista Service Pack 1 several times, it seems he has charged, when I check the history of downloads, see them here and then I get another request to fill it up ag