Insulation of the register HKCU mode

Similar Questions

• Disabling the feature of Mode of insulation?

  Work with the German Version, so don't know if its called "Mode of Isolation" in the English version too.

  Problem is, that working under pressure a klick aditional on an object will pass very quickly. Who always throws me in this Mode of insulation of the useless. For me this 'feature' is absolute no. used and I wish that I could turn it off. Anyone with a clue to get rid of it?

  Manual

  In the General preferences, uncheck "double-click to isolate" which stops.  If you want to leave it on so that you can use it whenever you want (it is very useful at the same time) you can try to speed up your double-click speed in your operating system to reduce the number of double clicks of misinterpreted.

• Insulation at the file level vs. file level

  It is even possible to completely isolate a single file in a package ThinApp, not whole file?

  Think about how ThinApp 4.5 manages files/folders for AppLinks collisions... based on the user guide the strictest isolation mode takes precedence.

  Good example is the customer file and tnsnames.ora Oracle. Both Application A and Oracle packages have tnsnames.ora files in the same directories. What is needed is to have application-specific file tnsnames.ora prevail while AppLink customer generic Oracle package.

  As there are several applications using Oracle client and all have tnsnames.ora files this approach would be ideal.

  Question, insulation of folder levels affect collision decision to replace the ' left to right' rule?

  No, it won't.

  Or this paragraph only applies to the level of isolation of the file during execution and does not provide preference to the most restrictive packet?

  OK, the "more restrictive" rule is used to calculate the final isolation of the record mode. The rule "from left to right", it is what determines which files will appear in the final virtual file system.

• The closed display mode is no longer works after update of the Sierra on my MBPro. Known bug?

  I use a vertical dock for awhile, so my MBPro retina works in closed with external display, KB and mouse display mode.

  But since I installed the update of the Sierra, the external display not Mac OS desktop.

  It only works when I open the built-in screen...

  The bug is known? Or y at - it a setting to adjust on the Sierra?

  Thank you in advance

  Hi darklemon,

  I understand that, since the update to Mac OS Sierra, you've been unable to use your MacBook Pro in closed view. I know it's important to use your computer in a way that suits you, then I'm happy to help you.

  Let's start by resetting your memory NVRAM and SMC which can often help with system display and related issues:

  How to reset the NVRAM on your Mac - Apple Support
  Reset the management system (SCM) controller on your Mac - Apple Support

  Once you have done this, follow the steps here to set up the closed display mode:

  Use your Mac laptop to view closed with an external display - Apple Support

  Thank you for using communities Support from Apple. See you soon!

• The mask purple of the private browsing mode, where is it?

  Hello!
  I installed Firefox 42.0 on my PC running Windows 7 SP1 32 bit and it is stable. But the purple mask, the novelty of the private browsing mode, does not work in the following scenarios. I don't see the purple mask on top of windows.

  1 right-click on the "Mozilla Firefox" shortcut, and then select Properties. Add ""-private "at the end of the area target;" \Program Files\Mozilla Firefox\firefox.exe"- private.

  2 tools > Options > privacy > history, click on the box "always use the private browsing mode.

  Do you have any advice?

  Best regards
  BluePencil

  You will see the purple mask if Firefox is in normal mode and you open a new private window.
  If you are in permanent private browsing mode, so there is no need to display the icon and it is deleted.

  You can use an extension for private browsing mode support tab.

  • Private tab: https://addons.mozilla.org/firefox/addon/private-tab/
  • Private browsing mode tabs get a dotted underline
  • You can enable or disable private browsing mode / disable via the context menu of a tab

• Why Firefox freeze and a box rectangular white happen on my Mac screen after the computer enters mode "sleep"?

  Why found frozen Firefox and a rectangular box on my MacPro screen after that the computer goes into screensaver mode and I come back to type it in again? I Force-Quit Firefox and restart my tabs from scratch.

  It got so annoying that I switched to Chrome for a while, but Chrome is a hoarder of power who wouldn't let me download at Amazon cover for books printed images as I write. I want to go back to Firefox, but the only way to prevent him from dying on me is to keep completely off the screen saver and sleep-ECOMAT modes. It started happening after I installed the new OS from Yosemite, then maybe it is a conflict of some sort.

  Here is a screenshot of the appearance of the white box on the Firefox screen frozen. Well, hmm. It seems that this image be download! Well!

  Anyone know what the problem is or how to fix it?

  Hello

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• By mistake I pushed a key combination who brought up the sensitive design mode. What is it?

  I pushed a key combination which has upped the reactive design mode by accident. What is sensitive design mode? I have no knowledge of web development software or anything more involved than the navigation programs. Just curious.

  Note that the ' tools > Web Developer "shows all the tools of web development with their keyboard shortcut.

  • Press the ALT key, or press F10 to display the Menu bar.

• Re: Satellite A100 keeps restarting itself of the option safe mode screen

  Hello

  I had a search but I couldn't find all the topics that have the same problem as mine, I maybe could have missed one:------.

  My laptop froze this morning so I had to reset by holding the power button down, then when I went to turn it back on, it goes to the screen of the safe option mode where it gives me the following options:

  safe mode
  safe mode with networking
  safe mode with command prompt

  last known good configuration

  Start windows normally

  I tried all of the above options and whenever one of them is selected, it starts to load Windows with blue small bar that hangs, restarts and repeated everywhere: S

  I hope that someone can help me, my life is on this laptop and I would be devastated if I lost it all lol

  Thanks :)

  Nadine

  Hello

  Looks like bones corrupt bootloader. The easiest way is to reinstall the operating system...

  > Hope someone can help me, my life is on this laptop and I would be devastated if I lost it all lol

  If you have important data, you can extract it using Windows live cd. Get it and boot from it and move important data on USB.

• I went the full screen mode and don't like it and need to know how to get back to what I had. Also, is there a good way to set up bookmarks? As in a column to the left or right? Thank you.

  I went the full screen mode and don't like it and want to return to what I had. Also, is it possible to create bookmarks so that list them all in a column to the left or to the right?

  Right-click on an empty part of the toolbar tab and choose "mode full-screen output.

  If you do not see the toolbar at the top of the page, move the mouse to the top and you will see, it seems.

  If this answers your question, please click the button solved next to this post after logging in to the forum. This will help others looking for a solution to the same problem.

  Thank you.

• Can I use the "Private browsing" mode on mobile?

  Can I use the "Private browsing" mode on mobile?

  Firefox for mobile has not yet a private browsing mode integrated. However, you can make the navigation in a separate or temporary, profile by running "fennec Pei" in app the N900 Terminal, or by using the Profiles Mobile add-on.

• Tecra S10 - USB-power does ' t stop the power saving mode

  I have the following problem.
  USB power on the right side three ports USB does´t closed the power saving mode.

  Only when the system is switcht off power on USB ports is disabled.
  What can I do?
  Thanks for a response.

  Hello

  You can check in the BIOS if the option called USB Sleep & Charge has been enabled or disabled.

  Change this setting and save the changes. Then start again.

  Check if you can see any improvement.

  Welcome them

• Satellite A200-1IW waking up from the idle screen mode - black

  I lost the instructions "Eve". I have Vista 32 bit official A200-1IW.
  A few days ago, I noticed that by pushing the "sleep" button I get one screen is turned off.

  Hard drive is working as processor (I hear the fan works) and seeing only flashes red. Incidentally, Hibernation is still alive (powercfg/h on) and hybrid sleep mode is turned off as it was before in power management. So I made no changes in the BIOS and in the registry.

  Enough of tender regular Vista upgrades. And thinking about it, I ve tried to recover the System State which was confronted with the problem. No difference. I used in the powercfg /a command line it shows S3 is active, S1 and S2 is not supported.

  I ve tried to change the power management settings and get no results. I can use the hybrid sleep mode, but I put t like it. Now the "sleep mode", single screen is turned off.

  Can you help me with my problem? I found a similar problem in the forum...

  PS. I disable LAN, I have not all updates are running and other applications. Maybe some service is hunging this mode and in that case why is the work of hibernation?

  I think that the solution is simple.
  You must update the BIOS and the graphics card driver.

  I read here in the forum that it must be a solution for these problems with the mode 'sleep'.

  Access the Toshiba driver page and choose your laptop and Windows Vista.
  Update the BIOS, then the graphics card driver.
  Restart the computer to update the latest Vista patches and reboot again.

  Once this laptop procedure runs correctly

• After the stand-by mode screen turns green or the GET messy graphics - Satellite M100-165

  When I leave my phone for more than 20 minutes on the stand of mode and I try to turn it on again the screen turns green or the graphics be annoying.
  In order to work, I have to reset and turn it back on. Does anyone know what I can do about it?
  Thanks in advance.

  Hello

  This problem occurs since the first day? Is your unit a clean install of the OS to factory settings?

• Satellite U300-144 does not come from the standby/hibernation mode

  Hi, can anyone help?

  I have a new Satellite U300-144 accompanying the Vista home 32-bit preinstallation. I have a problem, he wants to come to the sleep/hibernation mode, and my clear blue power is always on standby/hibernation mode. I hold the power button to restart the computer and then I get a message of illegal closure because I don t shutdown right.

  I tried to upgrade the BIOS later for my model and the n t the problem, then I tried to upgrade to Vista Ultimate t doesn't help either. I installed all the drivers and everything works real well.

  A colleague using me U300 Office. I asked him to check the extended sleep/standby option and he reported that everything works correctly. He always uses the factory settings and only one update is added value package. He kidnapped the former and installed latest version of the Toshiba download page.

  Have you installed latest PPVS too?

• With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp.

  With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp bug. Please specify.

  bjmrao wrote:

  With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp bug. Please specify.

  Please ask Whatapps since you use their app.