Intallation stalls on 3/4 in Windows XP

Similar Questions

• Computer to stall at the start of windows during the upgrade from XP to Windows 7

  During my update from XP to 7 files appear to load correctly from the disk installation, but when my computer only the first reboot, it crashes to the Windows splash screen.  I tried to boot with the floppy to upgrade without success.  If I bypass the boot CD to the Boot Manager screen helping with the selection of the installation of Windows, it still hold on the Windows start screen.  Can you help me with all the patches to this question?  Thank you!

  Turn off the PC, remove the AC power cord, wait 5 minutes and remove the (2) 256 MB sticks and the sticks of 2GB (2), it should then leave you with only one pole and a total of 2 GB of memory installed.

  Remove all PCI slots (e.g. SoundBlaster) cards. Remove the network adapters and VPN.

  Plug the power cord back, start the computer, and try again.

  J W Stuart: http://www.pagestart.com

• eRecover stalls on drive system - Aspire 5750

  Greetings-

  After infection, I bought the Acer recovery disks.  Boot from the DVD/CD player with the "system drive" according to the statement, it stalls.  I get a window saying "Please wait a moment" and the cursor turns... for HOURS...

  Can someone help me with this please?

  Thanks in advance.

  Turns out the screws in the hard drive out... the 2 year warranty ran out last month — don't you know.

  Anyway, the player is replaced by a better, and all should be well.

  Thank you all!

  Bobbie

• Windows 7 update runs forever

  I have a laptop HP (G71 - 448 CL) that has been sitting for a few years. Happens to me to remember installing free Windows 10 was al; more more and pulled the laptop to install. I was a day late to install it for free, but when I tried to update it started running forever.

  I downloaded the update diagnostic and it ran also found a tool to reset update and did this.

  I ran to a DVD and Malwarebytes Microsoft Security databases.

  When I launches the update, he said that there are no updates installed and now worked for three days with the Green banner goes pretty slowly. This screen also indicates that it is 9 in option updates available, but does not show what they are.

  How long should I wait to get it working?

  I have a direct connection cable to the cable router.

  You can wait as long as you want too

  But it would be best to follow these instructions :)

  The manual installation of updates that you have to change your update settings to never check the updates and restart the machine first.

  Make sure that KB3020369 is installed, otherwise install it manually.

  These links will prompt you to download as soon as you click on them just for you give a heads up :)

  Win - 7 32-bit

  https://download.Microsoft.com/download/C/0/8/C0823F43-BFE9-4147-9B0A-35769CBBE6B0/Windows6.1-KB3020369-x86.MSU

  Win - 7 64-bit

  https://download.Microsoft.com/download/5/D/0/5D0821EB-A92D-4CA2-9020-EC41D56B074F/Windows6.1-KB3020369-x64.MSU

  Then manually install KB3172605

  https://support.Microsoft.com/en-us/KB/3172605

  KB3172605

  Win - 7 32-bit

  https://download.Microsoft.com/download/C/D/5/CD5DE7B2-E857-4BD4-AA9C-6B30C3E1735A/Windows6.1-KB3172605-x86.MSU

  Win - 7 64-bit

  https://download.Microsoft.com/download/5/6/0/560504D4-F91A-4DEB-867F-C713F7821374/Windows6.1-KB3172605-x64.MSU

  After your windows update settings back to what you had before, and manually check the updates and the rest should appear shortly.

  If you have problems with the installer of stand-alone stalling stop and disable the windows update service,

  Switch back to default after installing other updates

  

  If you need Visual AIDS to refer to this

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-update-problems-read-this-first/28147a5f-B0B0-480b-bed9-834a2da7a375

• Driver HARD drive required for installing XP on my Equium M50-216

  Where can I find this driver? Ive looked in the wire section but theres no clearly marked driver for it. Installation of XP is stalled at "Setup is starting Windows XP", Ive updated to update the BIOS, so that's all I can think about

  Could you please put first what model/series laptop do you have?

  Published in you the driver second messages has been designed to use the RAID functionality.
  You have RAID?

• color of HP laser jet cp1518

  driver for the cp1518, will not remain in stalled.
  the message.
  win 32nt Windows version - 6.0.6001.65536.
  HP tool box exversion: 003.
  201.00156.
  the printer settings will not save. the printer driver is not compatible with a policy enabled
  on your computer that blocks nt 4.0 disk.
  can you help me?
  Griffin d.j.
  Chicago, Illinois.
  E-mail address is removed from the privacy *.

  Uninstall/reinstall.

  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=2093&LC=en&DLC=en&cc=us&lang=en&product=3422472

  Above are the Vista 32 bit drivers for your printer model.

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=37647&tmp_task=setupCategory&LC=en&DLC=en&cc=us&lang=en&product=3422472

  Installation instructions.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=3422472&LC=en&cc=us&DLC=en&submit.y=3&submit.x=8&lang=en&cc=us

  Maintenance, etc.

  For any other problem, contact HP direct:

  http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=us&lang=en&product=3422472

  See you soon.

  Mick Murphy - Microsoft partner

• VMware reports Ethernet but host's WIFI?

  I have VMware Player version 7.0.0 in stalled on a PC of Windows 8.1. I installed Windows 10, 64-bit build 6879 without any problem, including the latest VM tools. Everything seems to work perfectly, BUT Windows 10 shows a connection to the network local gigabit to the Internet so that my real connection is a 7260 Intel wireless adapter. Not much, but when I stopped 10 Windows and close VMware Player, my wireless adapter is in a State that requires toggles make it work again.

  Any ideas will be appreciated.

  Jim

  VMware has only a wired Ethernet connection to the guest operating system.  This is normal and expected as defined in the virtual hardware virtual network adapter is after all a network card wired adapter not a Wi - Fi network.  BTW... On a related note, if at any time you do something that requires a Wi - Fi network adapter in the guest operating system then you will need to provide your own network adapter USB Wi - Fi for you directly connect to the virtual machine.

  Terms of loss of connectivity after the closure of VMware Player, sorry I have not experienced this problem.  To help diagnose/troubleshoot, you can provide some more technical details about your network environment and configuration of the virtual machine network adapter, for example NAT or bridged.  Also, is this a problem every time or it is intermittent?

• 6 installed Lightroom and it freezes while working after startup.

  I recently installed Lightroom 6.  It starts and opens without a problem but then it stalls.  I am on Windows 10 and I checked my system requirements then seem to be ok.  I also installed Photoshop and it seems to work without problems.  Can anyone help with this problem of gel.

  I found the solution in a post later.  The GPU driver that I use is not supported by Lightroom.  I had to manually turn off the graphics process.  The indications are using Adobe Photoshop Lightroom | Graphics processor (GPU) acceleration, troubleshooting & FAQ Lightroom

  I use an AMD Radeon HD 6970 with driver version 15.201.1001.0.

• Windows Update stalls

  I'm trying to run Windows update on a Dell laptop.  Win7 Home Premium.  Traditionally is runing and update very well.  Now there is no stall to the updates downlaod.  Current message is "download 24 updates (0 total KB, 0% complete).  Downloads don't even start.   I turned off all firewalls and other such software without effect.  Other computers on the network up to date very well.  Product is activated.  Any suggestions on how to get this laptop set to day?

  Hi Frogsteaks,

  Check the history of updates to see if there are errors illustrated.

  1. open Windows Update by clicking theStart button. In the search box, type Update, and then in the list of results, clickWindows Update.

  2. in the left pane, clickview update history.

  3. right click on the update has failed to get the error.

  If your computer is experiencing problems find and install updates of the operating system, try using the troubleshooting Windows Update tool to solve the problem.

  Open the Windows Update troubleshooting tool by clicking theStart button, then Control Panel. In the search box, typeTroubleshooting, and then click Troubleshooting. Undersystem and security, click fix problems with Windows Update. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Try to install the updates and check if the problem persists.

  If you are unable to install the updates, it might be due to some conflicts. Therefore, switch your computer to boot and then try to install the updates.

  http://support.microsoft.com/kb/929135 .

  Note: make sure that the computer is configured to start as usual by following step 7 of article

  If nothing works, try the steps manually from the given article.
  http://support.Microsoft.com/kb/971058

  Reference:
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798

  I hope this helps.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Configure windows update stalls

  When I hit the windows icon in the lower left to stop the computer, it has the text 'install updates and shutdown computer'. I think that its stuck or. It installs and stops well but when I restart the computer it stalls on the configuration screen. It does not get spent 0%. What is the problem?

  I had the same problem. Windows 7 Edition Home Premium.

  "Auto update" would not end after a reboot. I got "update Comfiguring Windows - 0% complete - do not turn off your computer." Then I had to wait what he at the time.

  I tried 'manual' updated and that fixed the problem!

  Go to "Control Panel". Click on "system and security." Click on "Windows Update" and follow the directions.

  I selected the recommended updates and install them. Told me to reboot, one completed updates, OK.

  Problem solved!

• Black screen? Windows 8 laptop freezes or crashes? Stall the HP logo?

  Hey everybody!

  I see several issues where people install windows 8 and the portable guard on them freezing or stalling on the HP logo.

  Symptoms include:

  I hope this helps!

  

  THX

• Network adapter 802.11n keeps stalling in Message' no. get error Windows 7 drivers are installed for this device. »

  Original title: 802.11n network adapter keeps dropping out

  My network card, Ralink 802.11n for Windows 7 Professional 64-bit, continues to stall as I have no connection to any network.  When I check the network card, he said, "no drivers are installed for this device."  If I try to update the driver, it indicates that the drivers are up to date.  The only way to get the device working properly is to shut down the laptop and restart.  When I do this the device manager says that the network card is working properly.  I looked at other solutions, but none of them seem quite fit.  I use a HP probook 4320 s laptop and I recently installed a I have to drive with the Windows 7 software pre-installed on the drive.

  Hello

  According to the description, I understand in your computer continues network to drop out of school and gives the error that "no drivers are installed for this device. I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem.

  This problem may occur because of corruption in the network driver or the network driver is not properly installed in your computer.

  Please follow the troubleshooting mentioned method below to check if his help.

  Method 1: run the network troubleshooter utility.

  The problem report contains one or more event logs. Administrators Network and technical support staff can use the information in the event logs to analyze connectivity problems or help interpret the findings. You can find this information by clicking on display of detailed information on the last page of the troubleshooting tool, or by following these steps:

  1. Open troubleshooting by clicking the Start button, on Panel configuration, and then, under system and security, clicking on find and fix problems.
  2. In the left pane, click View history.
  3. Right click on the troubleshooting report, and then click details.

  If the problem persists, follow the next method.

  Method 2: uninstall and reinstall the network driver.

  Please follow the steps below.

  1. Open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In Device Manager, look for the network adapter.
  3. Right-click on the adapter and select uninstall.
  4. After uninstalling the network driver restart the driver.

  After the computer restarts, Windows will automatically try to install the driver real network. If not, I recommend you download the latest driver available from the manufacturer's Web site and check if its help.

  Please follow the below link to download the driver from the manufacturer websites (HP) network.

  http://h20565.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=4145372&swLangOid=8&swEnvOid=4059

  Hope this information is useful, if the problem persists please write us back with the quick information so that we can help you further.

• Inspiron 5000 15 stall since the Windows 10 upgrade series ethernet connection

  I have a Dell Inspiron 15, 5000 series that accompanies Windows 8.1 on it. I have upgraded to Windows 10 and the ethernet connection began to stall, giving messages that the cable is not connected when it is. I had installed all the updates driver from the Dell site, including all the firmware and the BIOS updated. According to the Dell website, the laptop has reportedly been tested to work with Windows 10.

  I've disabled the card, then raise it, but always without success. I tried to roll back to Windows 8.1 and the ethernet of the functions of connection very well. I tried the upgrade of Windows 10 once again, but the ethernet connection does not work even after reinstalling all the drivers for Dell. Is it possible to know if this model is simply not able to upgrade despite the affirmation of Dell is it?

  In fact, I found the answer this morning. I had to downgrade the driver for the Realtek PCIe FE Family Controller at 9.1.402.2015. So far, everything looking good. I have access to the internet via the ethernet cable. Go to let it run a bit and make sure that it is stable. I guess it was unhappy with the latest driver.

• How to fix Windows 7 stalls/gel/white screen / crashes?

  I tested a solution for months now on Windows 7 with random freeze/stall/white screen/hang...what never terminology applies to nothing does not.
  I read almost all of the blogs, and I so far did not come to the top with a response date of 12/04/12.
  I wish Microsoft admit to this problem and fix it.

  Symptoms:
  * On a new installation, Windows will stop random work except the mouse.
  * This appears in time of 5 seconds, until a maximum of 30 seconds, then back on.
  * This behavior re - stops with the frequency of all the 6 minutes to 30 minutes in time.
  * If repeated receive mouse clicks, the screen turns white with the rotation of the cursor (gesture of work).
  * At the end, the operating system returns to normal.
  * Has been observed by me on almost all Windows 7 machines once either.
                    
  I'll save read here about what I tried to do. I just need someone to see this post to tell me or link me a solution to this; What seems to me a problem forever with the Windows 7 operating system.

  Robert Reinman
  Shop supervisor/computer/tool of Support & tool and die maker for 39 years.

  Hi Robert,.

  I suggest you try the steps from the following link:

  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286

  Note: When you perform online virus scanyou will lose some data which are affected by the virus. Microsoft is not responsible for the loss of this data.

• A little black box appears at the top left of my Windows 7 login screen just before the Welcome screen and the stalls password when I try to enter. HELP PLEASE?

  Whenever I turn on my computer for a week, I try and put my password and after the first or the second key it stalls. He again entered my password, but I don't see whether registration in the password box. I also have a little black box that is slightly smaller than the size of a post-it note in the top left area of my screen for half a second, then it disappears and continues to my home screen and office as usual.

  I had this problem for about a week, and I can't understand what is the problem. I googled some things, but no one had the right answer. Someone said it was a startup with a defective software program, but I checked and I have the same 4 startup programs I've had there for a year. (DELL Wiireless WLAN Card, IDT PC Audio, Synaptics Pointing Device Driver and NVIDIA Compatible Windows 7 display driver) Everything is up-to-date and I already have Windows Update.

  * A video that I captured from my computer of this problem: http://www.YouTube.com/watch?v=GViQv-Xrm0U 

  (password stops around 0:42 and black appears at 0:52)

  Someone help? I'm paranoid that it might be a Spyware... ? None of my passwords and others are corrupted though, everything has been fine. I am making bluescreens (but not daily). I scanned with Malewarebytes and found nothing and I do that again right now. I also tried Registry Mechanic and Windows Security Essentials, but found nothing.

  I have no idea what Forum put it, this is my first time using this site...

  Model: DELL Studio XPS 1330

  Windows 7 Ultimate (64-bit)

  (I had this computer for about a year)

  The position of Bramble to drown in this issue How to start the program before windows logon user 7 Siena above [Archer] suggestion that you should study the entries in the services.