Integer LOV defaults 0 in Jdev 12.1.3
In query Panel when we define a LOV for a whole attribute (area drop-down list with a list of values), the default value of 0.
12.1.3 Jdev (sometimes in 12 c)
Java 1.7
PFA turned screen. Please advice
To get rid of the problem, we should use oracle.jbo.domain.Number for this attribute instead of bigdecimal/integer/long
Tags: Java
Similar Questions
-
Hello
Use the pagination by default with in the table for application portlet using Jdev (11.1.1.7.0), when I run application portlet that it works correctly.
When I run the same portlet application with the webcenter Portal framework, I could not find navigation page number and the total number of records.
Thank you
SIFI.
Make sure you put your portlet inside a stretch no layout, like PanelGroupLayout, don't put it inside the PanelStretchLayout and if you have a PanelCollection put the PanelCollection inside a PanelGroupLayout
-
Compile errors in default toolbox in jdev 10g application
jdev version: 10.1.3.3
OA Framework version (according to the directives of the instance): 12.1.3
First I couldn't find OA Framework Dev Guide for 12.1.3. So I refer to the OFA 12.1.2 dev guide. Please let me know if that's ok. If not, please let me know where I can refer OAF 12.1.3 dev guide.
Now, I will set up my windows development environment according to the guide of dev OAF. I made 1 to 6 tasks according to the instructions in the guide.
In the final task 7 "test your configuration', when I rebuild the application, I get 2 errors as follows:
--------
Project: C:\Jdeveloper10g\jdevhome\jdev\myprojects\LabSolutions.jpr
C:\Jdeveloper10g\jdevhome\jdev\myprojects\oracle\apps\fnd\framework\toolbox\labsolutions\Supplier.Java
Error: cannot read classfile: XMLDomainInterface.class on classpath C:\Jdeveloper10g\jdevbin\BC4J\lib\bc4jmt.jar/oracle/jbo/domain/XMLDomainInterface.class
Error (162,28): XMLDomainInterface not found in the interface oracle.jbo.domain.XMLDomainWriter in oracle.jbo.domain.Date from class to class oracle.apps.fnd.framework.toolbox.labsolutions.Supplier
--------
I have no idea about these errors. I would be very grateful if some experts OA Framework can provide a help/suggestion in this regard.
Thank youHello
Download & use the Patch 9879989.
Note: it is good to know that you are using the forum of the last 5 years. :) As I was not aware of the same.
I think it is always good to welcome the new user by referring to the label of the forum.Kind regards
GYAN -
The LOV OAF page does not pop up in applications, but no question in tool JDEV
Hello
I am faced with this strange problem.
I developed a Page of the OAF who LOV attached to 5 fields on the page.
Pop ups LOV when executing the JDEV tool page.
But when the saved page to Oracle Apps. The LOV is not poping up for all fields.
Then click on the flash light symbol in LOV access page, I get the error "error on page".
Please help solve the problem.
Concerning
Krishnan{forum: id = 210} is where you want to be.
-
Hello
I have a Popup Lov key (description of the poster, returns the key value) and I want a default value. It is based on a list (user name, id).
I tried to put the id of the user logged on as default, but what I see on the screen in the field is the value of the id, not the username.
How can I pass the user id and see the user name?
Thank you.Oh! My bad, I thought you are talking about regualt lOVs not popups.
OK, so that's what you need to do, I tried it and it worked for me:
your popup LOV > default > type: body of the PLSQL function > and enter a query like:
declare
UID number.
Start
Select user_id from the uid of the user
where UPPER (username) = UPPER(:APP_USER);This should show username and retune userid.
Hope this helps,
Sam
Please give good answers by marking correct or useful. -
Impossible to reset values LOV
Hello
I have a jsff page. I have LOV dependent as below
JDEV version: 11.1.1.5.0
LOV_A
LOV_B
LOV_C
LOV_D
LOV_E
LOV_B depends on LOV_A
LOV_C, LOV_D depend on LOV_B
LOV_E depends on LOV_D
LOV are working properly and to submit, the main Main_VO which holds these LOV is < B > application < /B > VO not based on entities.
< b > < /b > problem: impossible to reset values LOV selected
< b > approaches followed up here < /b >:
1 ResetButton
2 CommandButton control with < af:resetActionListener / > and immediate = "true" >
3. at the bean, I tried to update the Main_VO with the code below
currentRow.refresh (currentRow.REFRESH_UNDO_CHANGES); Here the line current is slected line in the user interface
Fortunately this resets the values of all the drop downs, unfortunately LOV contains previously triggered lists and even addiction is lost
4. I changed the LOV_A value attribute like below as suggested by Frank in a thread
< af:selectOneChoice < b > value = "#{backingBeanScope.AddEventOnOrderReleases.BindVariable}"< /b > "
label = "#{bindings." BsResponsiblePartyGid1.label}.
required = "#{bindings." BsResponsiblePartyGid1.hints.mandatory}.
shortDesc = "#{bindings." BsResponsiblePartyGid1.hints.tooltip}.
ID = "soc2" autoSubmit = "true" rendered = 'true '.
Binding = "#{AddEventOnOrderReleases.BindVariable} '"
valueChangeListener = "#{AddEventOnOrderReleases.selectBSResponsiblePartyGId}" >
< f: selectItems value = "#{bindings." BsResponsiblePartyGid1.items}.
ID = "si2" / >
< / af:selectOneChoice >
This change, I see a conversion error cannot convert < b > Integer < /b > < b > RichSelectOneChoice < /b >
In this regard, any help is appreciated.
Thank you
Agnes.To reset a lov you must rest value the lov stores selection too.
Check out my blog http://wp.me/pcBZk-sATimo
-
Several LOVs for LOV activate view attribute
JDeveloper 11.1.2.3 ADFbc + JSF
I have a multiple LOVs of an attribute of the LOV-Enabled view object, (2 of the list of values, SalesRep and managers)
in the ADF Tester model works as expected.
but in the GUI does not work, only the default LOV is indicated, when I change the discriminator value LOV default remain selected,
and then go to the next line (I use the table of entry af:table) LOV changed and select the initial value on the other list. (Partial self submit and triggers are already set up)
any ideas or clues will be welcome.
Thank youDo you use a LOV Switcher to the ADF BC layer to achieve? You have configured by dependency of attribute for the transient attribute?
-
Profile of default deployment in ADF
We are in the process of creating file EAR uat/production, when I created the file ear using default deployment in Jdev (Studio Edition Version 11.1.1.6.2) profile, Jdev also put following files
META-INF/application.xml
META-INF/cwallet.sso
META-INF/jazn-"Data.xml"
META-INF/jps-config. XML
META-INF/weblogic-application. XML
adf/META-INF/adf-config.xml
adf/META-INF/connections.xml
I believe that connections.xml should not be part of the ear file, how do I remove the connections.xml in one EAR, is there any other file I should removeHello
Connections.XML comes into conflict with the JNDI.
Make sure that 'Auto Generate and Synchronize weblogic - jdbc.xml during the deployment descriptors' and not controlled.one last thing, do a right-click on your module application-> configurations - > select configuratiuon-> edit-> connection type-> select JDBC data source.
In this way, you ensure that AMs use JNDIAnd if you uncheck the box above will ensure that the connections are not created
-
Overiding the af error message: inputComboboxLOV
Jdev: 12.1.2
I have a LOV in a page. and if I get 123456 which does not exist in values LOV I get a popup of error 'Invalid Value 123 456'
I can customize this error message to display the different error message.
My test: I added a validator class, registered in faces - config.xml I added a FacesMessage custom, but now the custom message and the original message gets displayed in the pop-up window.
It is supported by < f: validator and it has only two attributes.
So please let me know if there is a way to do this.
Thank you
Hari
Hi Hello
Try this to remove the default error message
https://blogs.Oracle.com/jdevotnharvest/entry/using_javascript_to_clear_validation_error_messages
or change the default message using this approach
http://www.adftutorials.com/ADF-how-to-change-lov-default-validation-message-invalid-value.html
Thank you
-
MAF: Using rest with JSON
Hi all
I use jdev 12.1.3
While practicing the CRG, I am facing a problem with the help of rest with JSON response.
I followed this: https://blogs.oracle.com/adf/entry/simple_get_operation_with_json
A slight difference is that I already have a Restful services with JSON response I have hace created in Oracle Apex.
Following the example, I followed the steps but when I open the application in the Android emulator after deployment, I don't get all the lines, I dropped the data as MAF List View control.
I don't get all the lines and I am showing 0 in the first row.
Please let me know what could be the problem.
Kind regards
KP
See your json output you can't edit it directly to the employee object.
First you must get the json object, then json for the elements array, then one by one, you must create the Employee object.
In addition, you see 0 because for a PGE no integer, the default value is 0 because the data are not filled the json output.
Try the code below and your question should get solved:
answer = restServiceAdapter.send("");
JSONObject jsonObj = new JSONObject (response);
JSONArray empList = (JSONArray) jsonObj.get ('items');
int size = empList.length ();
ArrayList empArray = new ArrayList();
for (int i = 0; i)
try {}
Employee emp = new Employee();
JSONObject result = empList.getJSONObject (i);
String empno = (String) result.get ("empno");
Ename string = (String) result.get ("ename");
emp.setEmpno (Integer.parseString (empno));
emp.setEname (ename);
empArray.add (emp);
} catch (System.Exception e)
{}
Employee [] e = (Employee []) empArray.toArray (New Employee [empArray.size ()]);
e return;
Your method signature must be:
public employee [] fetchEmpDetails()
With the signature above you return an employee table which can be used for a list view.
Let me know if it helps.
Kind regards
Deepak
-
Attachment of requisition class
Hi all
How can I limit the category LOV to Approver (default and remove the remaining from the LOV) in the attachment of the requisition.
Thank you
ASM
ASM,
The respective objective to be achieve through customization.
Please see the below is noted as it might help you:
Customization: How to limit the Type of Transaction values [Video] list? (Doc ID 1529348.1)
How to customize add it an LOV default "of approver' attachment to the top of the list? (Doc ID 754676.1)
Thank you &
Best regards
Asif
-
Hello, I'm doing: Script error: Index Out of Range the following
Sprite (spriteNumber) .member = member (pBoard [cardNumber], "Cards")
This is a cast: maps where I have 10 cast members. I have a matrix of 20 cards in a game of memory and the cast members have half the number of matrix. But I can't over this error that won't go away no matter how hard I try.
The script which is placed on the chassis reads as follows:
-Definable properties
property pSpriteOffset, pDisplayDelay, pGameOverFrame
property pClickSound, pMatchSound, pNoMatchSound
property pNumberOfCards - the number of cards in the game
property pBoard - contains a list of what the cards are where the
property pCard1 - the first map of a clicked on pair
property pCard2 - the second card in a pair clicked on
property pCardTimer - the moment where a user clicked on the second map
on getPropertyDescriptionList me
List = [:]
-pSpriteOffset is used to determine how far to
-the first map of the upper part of the partition is
-so, if the first map begins to channel 11.
-the offset would be 10 (10 away from channel 1).
List of addProp, #pSpriteOffset,------.
[#comment: 'Card Sprite Offset', \]
#format: #integer,
[#default: 0]
-pDisplayDelay, how much is it ticks the pair of
-cards will be kept on the screen for the player
-to see before being removed or turned their backs
addProp list, #pDisplayDelay,------.
[#comment: "Display time-out,"------]
#format: #integer,
#default: 60,.
[#range: [#min: 0, #max: 240]]
-When the user clicks a sprite, the sound is played?
List of addProp, #pClickSound,------.
[#comment: 'Click', \]
#format: #sound,
[#default: 'click']
-If a sprite is matched, this sound is played?
List of addProp, #pMatchSound,------.
[#comment: 'The match', \]
#format: #sound,
[#default: 'fit sound']
-When a sprite does not match, the sound is played?
List of addProp, #pNoMatchSound,------.
[#comment: "Not of his Match,"------]
#format: #string,
[#default: ' "]
-When all the sprites are matched, the film, which frame to go to?
List of addProp, #pGameOverFrame,------.
[#comment: 'Game Over Frame', \]
#format: #marker,
[#default: #end]
back list
end
-shuffles the cards to generate a list of the pBoard
-Initializes the properties of game
on beginSprite me
-raises reference to library 'Maps' to see how many cards there are
pNumberOfCards = the number of members of castLib "cards".
-create a list with each card in the list twice
List =]
Repeat with i = 1 to pNumberOfCards
Add to the list, I have
Add to the list, I have
end repeat
-randomly populate the list of pBoard with elements of
-the previously created list
pBoard =]
Repeat while list.count > 0
r = random (list.count)
Add pBoard, list [r]
deleteAt list, r
end repeat
-initialization of set's properties
pCard1 = 0
pCard2 = 0
end
-called by the sprites when the user clicks on
-the spriteNumber parameter indicates the number of sprite clicked
on turnCard me spriteNumber
-play a sound, if there is a
If pClickSound <>' ' then puppetSound 1, pClickSound
-determine the number of card
cardNumber = spriteNumber - pSpriteOffset
If pCard1 = 0 then--first card clicked
-Save this map
pCard1 = cardNumber
-put it back
Sprite (spriteNumber) .member = member (pBoard [cardNumber], "Cards")
otherwise if pCard2 = 0 alors--deuxieme card clicked
-ignore if it's the same card
If cardNumber = pCard1 then exit
-Save this map
pCard2 = cardNumber
-put it back
Sprite (spriteNumber) .member = member (pBoard [cardNumber], "Cards")
-the timer
pCardTimer = ticks
else - two maps are already given {6}
-This occurs if the user clicks very quickly
-the strength of a look at the two maps
returnCards (me)
-Make sure that the card has not clicked twice
If sprite (spriteNumber) .memberNum = 0 then exit
-new card as the first map
pCard1 = cardNumber
-put it back
Sprite (spriteNumber) .member = member (pBoard [cardNumber], "Cards")
end if
end
-leans on two back cards and compares them
on returnCards me
If [pCard1] pBoard = pBoard [pCard2] then - they are a match
-play a sound, if there is a
If pMatchSound <>' ' then puppetSound 2, pMatchSound
-remove the two sprites {8}
Sprite(pCard1+pSpriteOffset).memberNum = 0
Sprite(pCard2+pSpriteOffset).memberNum = 0
-check for game over
If checkAllMatched (me) then
go to the pGameOverFrame framework
end if
on the other - no match
-play a sound, if there is a
If pNoMatchSound <>' ' then puppetSound 2, pNoMatchSound
-Turn the two cards {7}
Sprite (pCard1 + pSpriteOffset). Member = member ("card Back")
Sprite (pCard2 + pSpriteOffset). Member = member ("card Back")
end if
-reset set properties
pCard1 = 0
pCard2 = 0
end
on exitFrame me
If pCard1 <>0 and pCard2 0 then <>- two cards are turned
If ticks > pCardTimer + pDisplayDelay then - deadline expired
-check the maps to see if there is a football match
returnCards (me)
end if
end if
-loop on the frame
_movie. GB (_movie. Frame)
end
-check to see if the game is over
on checkAllMatched me
-loops through all the cards
Repeat with i = 1 to pNumberOfCards
-determine the sprite of the card
spriteNumber = i + pSpriteOffset
-If it's still a card, the game is not over
If sprite (i) .memberNum <>0 then return FALSE;
end repeat
-all the cards missing, then game on
Returns TRUE
end
and this is the script which is placed on the sprite in the matrix:
on mouseUp me
-just specify the script to frame this sprite has been clicked
sendSprite(0,#turnCard,me.spriteNum)
end
Well, I'm just to let anyone reading know that I finally solved my problem after much thought and looking at the code again and again.
That's what I did:
Here, I noticed that there is some code to add a list of twice
-create a list with each card in the list twice
List =]
Repeat with i = 1 to pNumberOfCards
Add to the list, I have
Add to the list, I have
end repeat
so I thought, what I mean is only a part of this list on my matrix and I finally got one brilliant idea that somewhere in this code there is another list to add. Then I looked carefully and finally the assumption that:
-randomly populate the list of pBoard with elements of
-the previously created list
pBoard =]
Repeat while list.count > 0
r = random (list.count)
Add pBoard, list [r]
deleteAt list, r
end repeat
a preceding
Add pBoard, list [r]
in the code once so maybe I have to add another
That's why I ended up with:
-randomly populate the list of pBoard with elements of
-the previously created list
pBoard =]
Repeat while list.count > 0
r = random (list.count)
Add pBoard, list [r]
Add pBoard, list [r]
deleteAt list, r
end repeat
that solved my error and now the game works. What a relief!
-
Panel tab with refreshment of parts problem
Hello
I have a jsf page that has a tab inside Panel. On each tab, I bounded task flows as a region. I've been updating and committing a task 2 task flow1 (tab1) (tab2) data. But when I changed to the tab1 tab2, the picture of the tab2 is not not refreshing and not displaying is not validated data.
So my question is, is there a way to restart BTF on each switchboard? Or y at - it a way to cool off just tables in task flow default activities?
JDev version: 11.1.2.2You can play with the refreshCondition... try to put a value that evaluates to true when you click on the tab (disclosureEvent).
Other methods-
How to refresh a workflow when the tab is opened?
http://adfdeveloper.blogspot.in/2012/05/task-to-refresh-task-flow.html
http://rimmidis.blogspot.in/2010/09/refreshing-task-flow-in-ADF.html -
Hello friends,
I'm working currently to offer details screen in I recruitment, I a FDF enabled on the screen and has a de FACTO
value attached to it, now, the style of the element is changed to LOV. When the page is rendered, the value of this LOV is set by default
According to the call of a procedure in the process Request() method.
The question is when I click on the flashlight icon and select the value in the list the older value is still kept in the field, sound is not pulling the new selected value of Lov.
What could be the reason? can't we lov default (style point: MessageLovInput)?
Please give me your suggestions on this.
Thanks in advance,
Had
Published by: 959792 on October 18, 2012 22:37Salvation had,.
You should check if your code to process request is called again and reset values. This can be validated by running the code in Jdeveloper mode debugger. If it is determined, that the method (which is by default the Lov) fire only under certain conditions. This would ensure that it does not pull over and over again to replace the existing data.Concerning
-
a link to a recordset using a filter using confused php
I have a product page that shows all the products in the form of images.
When the user clicks on an image I need to link to all products with the same id of category
below, I have the product of the product page
"" < a href = "trousers.php" > < img src = "... / pictures/BL2012/romper costume, small, JPEG, Black Superhero.jpg" width = "115" height = "86" alt = "Raglan romper" / > < / has >
I then the results page and all I want to see on this page is the pants which are in category 4 in the mysql database
This is the detail page php content (I have so far joined the product with the category table table
<? PHP
@mysql_select_db ($database_beau, $beau);
$query_Recordset1 = "SELECT * FROM beaProdSizes, beauCat WHERE beaProdSizes.CatID = beauCat.catID";
$Recordset1 = mysql_query ($query_Recordset1, $beau) or die (mysql_error ());
$row_Recordset1 = mysql_fetch_assoc ($Recordset1);
$totalRows_Recordset1 = mysql_num_rows ($Recordset1);
? >
I have also a menu "select" currently fulfils all the products that the category has not been filtered
< form id = "FormName" action = "" method = "get" name = "FormName" > "
< select id = "selectName" name = "name" >
< option value = "select Design" > select Design < / option >
<? PHP
{}
? >
< option value = "<?" PHP echo $row_Recordset1 ['name'];? > "> <?" PHP echo $row_Recordset1 ['name'];? > < / option >
<? PHP
} While ($row_Recordset1 = mysql_fetch_assoc ($Recordset1));
$rows = mysql_num_rows ($Recordset1);
If ($rows > 0) {}
mysql_data_seek ($Recordset1, 0);
$row_Recordset1 = mysql_fetch_assoc ($Recordset1);
}
? >
< / select >
Thanks in advance
Jonathan Fortis wrote:
When the user clicks on an image I need to link to all products with the same id of category
Add a query string for the link:
In the advanced Recordset dialog box, change the SQL query like this:
SELECT * FROM beaProdSizes, beauCat
WHERE beaProdSizes.CatID = beauCat.catID
AND beauCat.catID = var1
Click on the button "+" next to the Variables and use the following settings:
Name: var1
Type: Integer
Default value: [use-1 or ID of a default category]
Running value: $_GET ['CatID']
Maybe you are looking for
-
Hello My iPhone 5 works well until a few days ago. Rear camera on my phone does not seem to open or to recognize because when I open it, it stays black and never focuses or turns on. The front facing camera works fine but when I turn it on in the bac
-
Goodmorning, I VBAI have experienced lately, and I have a slight problem. When you use a hardware trigger I sometimes have a downtime. My trigger is a 24V signal and my cam is a G201C of Manta (ally). (Look at this message below for the trigger param
-
Files Windows Server Essentials 2012 R2 Hard Drive Full move
My hard drive was full. The indications he gave me was to move files to another drive WD 3 to. I did I saw the files. Then he said to back up my computer. I did it. but when I did that now I don't see my folders and files that were in the folders on
-
I'm trying to re - download Windows Media Player 11 - to get what I need to use the Windows genuine validation tool and enter a key. I used previously without a problem but are now downloaded it and when I try to run it, I get an error message saying
-
How can I activate my computer accept third party cookies__
I trrying to make a payment to bagster and it won't accept it because it says that my computer will not allow third-party cookies