Integragtion LDAP for DMM using Digital Signage

Similar Questions

• Collection of samples for 1 d digital Wfm N Chan NSamp

  Hello

  I'm stuck in obtaining multiple samples.

  The system configuration:

  NOR SMU-1062 q

  NEITHER SMU-6341

  SCB-68 M series

  I use Digital 1 d Wfm N Chan NSample for data output. I used the digital waveform data table.

  I checked each lines with DMM, and I could only check the last sample. (dt = 4S or more).

  Data table:

  Example 0: 010 1010

  Example 1: 001 0100

  Example 2: 100 1010

  Results: line 0 (PIN 52) (1), line 1 (0), line 2 (0), Line3 (1), Line4 (0), Line5 (1), Line6 (0) - (another Question: it looks like reverse the order for me...)

  You have any suggestions to check all the samples?

  Allow me to attach my file vi.

  Thank you

  Insuk

  Hello

  I found the solution.

  I have not configured the "DAQ - mx sample clock.

  Happy Thanksgiving day!

  Thank you

  Insuk

• Someone at - he catches class Academy of Digital Signage?

  Hello.  I am encouraged to take this class, but I am concerned because I've never used photoshop, flash, etc.  That's how much a drawback for me?

  Did you find this class worth it? Information about this class would be great.

  Thank you

  Rose Ann

  Rose Ann,

  
  

  When I started working on the stuff of Digital Signage, I took the courses of the Academy.

  The course is set up well and has many laboratories.  I didn't know photoshop or the

  other applications, but laboratories will guide you step by step everything.

  
  

  Highly recommend if you novice to the stuff of Digital Signage.

  
  

  See you soon!
  

  
  

  T.

• M40X: using digital telephone line with modem internal

  the M40 X manual says use digital telephone line with the internal modem, in zimbabwe, all lines are digital until to now do for telephone line

  [Edited by: admin August 10 05 21:19]

  Hallo nasir

  You are right. Connect the modem to a digital telephone line. As far as I know, the tension is much higher by digital line and it can damage the equipment.

  In my opinion the best solution for you is an external digital modem.

  Good bye

• using slots chassis for general use cRIO

  Hello

  I have cRIO-9004 and cRIO-9103 Chassis, labview 2011...

  AFAIK, the cRIO chassis controls its slots if it present any module or not... If someone detect read EEPROM and so on...

  But how can I control the slots on the frame cRIO for my own general use without any module...

  When I create projects, it shows me just like I/O chassis

  * chassis temperature

  * LED FPGA

  * Scan clock

  * Sleep

  * the system reset

  I couldn't write anything of chassis slots and see to the oscilloscope screen, (for example: using a digital or analog output)...

  Didier...

  Try to follow the steps, you will create a new module. As in this example, but skip the part of the circuit.

  http://zone.NI.com/DevZone/CDA/tut/p/ID/7868

• Windows Movie Maker "the file is protected using digital rights management and cannot be imported."

  I downloaded a large .wmv file last night and have to divide into 8 smaller parts, but when I try to "import media" in Movie Maker is stipulates that "the file is protected using digital rights management and cannot be imported.

  Is it possible to import the file to edit?

  Turnbite removes the DRM http://download.cnet.com/Tunebite/3000-2140_4-10783040.html but I still don't know if it would work with Movie Maker (only because I haven't used products - looks like it would work, but I'm not sure).  Here is a review of version 6 (the current version is 7): http://mp3.about.com/od/audiotools/fr/Tunebite_6_Rev.htm.  Apparently, he's copying your DRM files and so it is required to have at least some degradation (but not a lot from what I've read - not noticeable).  Because it's free, it can't hurt to try it and see if it solves the problem.

  AVS looks like he got a number of good products http://www.avsmedia.com/, but I don't think that one of them address the DRM issue.  I really didn't listen to music or watch videos on my PC very often so I'm not familiar with the products to do such things.  May I suggest you post your question in the music and its Forum: http://social.answers.microsoft.com/Forums/en-US/vistamedia/threads , where issues of music specialists will be more than happy to help you with your questions.   Or in the photos and video Forum at: http://social.answers.microsoft.com/Forums/en-US/vistapictures/threads where the video specialists will be happy to help with you project of filmmaking.

  As for Shane Childs, I suspect that Karthik copied an answer, he used for this person to respond to your question and everything just forgot to change the username - just a typing error.

  Good luck and I hope this helps. Lorien - a - MCSE/MCSA/network + / A +.

• How can I create greeting cards using digital photos now that Microsoft Picture It is not compatible with Windows 7 Home Premium

  My old computer has Microsoft Picture It and I was able to create greeting cards using digital photos to my computer.   My new computer has Windows 7 Home Premium edition and I can't access on my computer greeting cards or create new ones.  I downloaded Windows Live, but who does not have an option to create greeting cards.    What suggestions do you have?

  Hello

  There are many programs available online that may have similar functions as the image what it program.
  I suggest that you use your favorite search engine and looking online for a similar program.

  
  

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Cisco VCS and LDAP for authentication of users

  I have a question about setting up LDAP for authentication of the user on the VCS. I want to have redundancy in my LDAP link. I believe that this is possible by setting a FULL domain name to the address of the LDAP server, then selecting a type of SRV resolution. What I'm not clear on is what the value for the server address would be if I used actually as SRV type of resolution. I should also add that I am looking to use TLS

  To clarify, if my AD domain name is myad.netcraftsmen.net. I have set the field as server address:

  myad.netcraftsmen.NET: assuming that VCS properly interrogate the DNS for the _service._proto correct parameters?

  or would I need to create an SRV record to that effect and set the field server address with the address (including the fields of _service._proto)

  or I need to specify one of the SRV records formats used by MS AD areas (there are several).

  If the latter, then what SRV record for TLS. I don't see records with port 389 (non-secure).

  My intuition tells me that this is probably the first option, but I could be far away.

  Anyway, thanks in advance for any input.

  Kind regards

  Bill

  Hi William,.

  I just checked it on a X6.1 VCS, and it seems that VCS searches SRV _ldap._tcp.domain (where 'domain' has been entered as the server address), both when the encryption is set to 'None' and 'TLS '.

  Hope this helps,

  Andreas

• How to match tunnel-group with auth ASA 8.2 and IPSec VPN Client using digital certificates with Microsoft CA

  Hello

  I set up a lab for RA VPN with a version of the ASA5510 8.2 and VPN Client 5 software using digital certificates with Microsoft CA on a Windows 2003 server. I did the configuration based on this document from Cisco's Web site:

  http://www.Cisco.com/en/us/partner/products/ps6120/products_configuration_example09186a0080930f21.shtml

  Now, the vpn works fine, but now I need to configure a tunnel-different groups so I can provide different services to different users. The problem I have now is that I don't know how to set it up for the certificate is the name of tunnel-group. If I do an ASA debug crypto isakmp I get this error message:

  % ASA-713906 7: IP = 165.98.139.12, trying to find the group through OR...
  % 3 ASA-713020: IP = 165.98.139.12, no group found by matching well payload ID: unknown
  % ASA-713906 7: IP = 165.98.139.12, trying to find the group via IKE ID...
  % 3 ASA-713020: IP = 165.98.139.12, no group found by matching well payload ID: unknown
  % ASA-713906 7: IP = 165.98.139.12, trying to find the group via IP ADDR...
  % ASA-713906 7: IP = 165.98.139.12, trying to find the group using default group...
  % ASA-713906 7: IP = 165.98.139.12, connection landed on tunnel_group DefaultRAGroup

  So, basically, when using certificates I connect always VPN RA only with the group default DefaultRAGroup. Do I have to use a model of different web registration for application for a certificate instead of the user model? How can I determine the OU on the user certificate so that match tunnel-group?

  Please help me!

  Kind regards

  Fernando Aguirre

  You can use the group certificate mapping feature to map to a specific group.

  This is the configuration for your reference guide:

  http://www.Cisco.com/en/us/partner/docs/security/ASA/asa82/configuration/guide/IKE.html#wp1053978

  And here is the command for "map of crypto ca certificate": reference

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/command/reference/C5.html#wp2186685

  Hope that helps.

• Requirements of LDAP for SSL - VPN on ASR 1002

  Hi all

  I intend to implement SSL - VPN (AnyConnect) on a rputer ASR 1002 running IOS - XE Software Version 15.1 (3) S2.

  I need to use LDAP for authentication of users and need to understand what are the requirements for RADIUS/GANYMEDE use LDAP.

  What I have to use Cisco ACS or can I use something like Microsoft IAS or free Raduis?

  Any helo will be greatly appreciated.

  Thank you

  Dmitry.

  Yes, you can use either use LDAP, Radius or Ganymede protocols to authenticate users of SSL VPN.

  You can use no matter what authentication server (doesn't have to be Cisco ACS), as long as they have either 3 supports authentication (ldap, radius or Ganymede) protocols.

  Hope that answers your question.

• Failover of the database for applications using JDBC connections

  Hello

  We have DataGuard instances for our Production databases and are configuring failover falls down the primary databases. We are able to set up TNS/LDAP for applications that use this method of connection, however we have a number of applications third-party who connect using JDBC and are not configurable in any other method. Is there something we can do about it or we manually configure these applications if a failover is required?

  Thank you

  Adam

  AdamJ.Sawyer wrote:

  Hello

  We have DataGuard instances for our Production databases and are configuring failover falls down the primary databases. We are able to set up TNS/LDAP for applications that use this method of connection, however we have a number of applications third-party who connect using JDBC and are not configurable in any other method. Is there something we can do about it or we manually configure these applications if a failover is required?

  Thank you

  Adam

  JDBC:Oracle:thin:[user/password]@//[host][:port]/service

  consider that 'HOSTING' can be rather a virtual IP (VIP); which can be configured at the level of the BONE

• For Web use color management

  I'm sorry if this has been posted elsewhere, but I was unable to find it. It's a bit hard to find when I don't know exactly how to explain the problem.

  My problem is that I see too much difference between the images in Photoshop and the same file in web browsers. The problem seems to double. The shadows of images are appearing where blotchy, as it appears in photoshop. This is especially true in the pictures with a lot of digital noise like a digital photograph shot at high ISO. The second problem is that images appear much more contrasting in web browsers than in photoshop. This is particularly noticeable monochrome images of high contrast in photoshop as the web browser pushes the contrast levels in the Kingdom of clipping and burn.

  I'll explain my material and the workflow so that you can get an idea where the problem might be. I shoot a Canon 20 d. I am running Windows 7 64 bit with a Benq 21 '' LED monitor. RAW conversion in Digital Photo Professional (although I have transformed my raw files in Photoshop for troubleshooting reasons and had the same problems). I convert my raw to tiff 8-bit files and open in Photoshop CS5 (also troubleshooted in CS3 with the same results) for the majority of my editing before converting small JPEG for web use where they are displayed in the current version of Firefox.

  The final jpeg always look great in Photoshop, but as soon as I open them in Firefox or one of Windows Photo Viewer they look terrible. I do not understand that Photoshop displays the ICC profile image where that most web browsers don't not/can not. That's why I convert my JPEG files in sRGB (I normally shoot in AdobeRGB) I was under the impression that an application not CM as a web browser would show everything in sRGB as is the internet standard. So what I see in Photoshop while displaying a picture listed for sRGB should be the same as in an environment not CM surely? For reasons of test I tried to process the unidentified images, but the same questions always came.

  Unfortunately my monitor is not shaped as I can't currently afford equipment. Back when I was in uni, we used Spyder, but it's just out of my means. Even though I think most of the people might be inclined to this blame on the lack of monitor profiling, I have my doubts. My problems are rarely found in different colors. I even experimented with changing the gamma settings while having one of the images open in Firefox. No gamma level, no matter how extreme, makes a lot of difference to the blotchyness of my shadow. Not only that, but profiling seems to aim at the synergy between the screen and print. I don't know how it could help bridge the gap between software.

  My wife has the exact same pc than me and even monitor (although hers is LCD and LED mine) and the same problems exist when it displays images. I noticed the images look good on my laptop on Firefox. This makes me wonder if the modern LCD monitors General contrast and brightness levels bring the problems I didn't know I had when editing on a laptop (I had to move countries and that's all I had unfortunately). What worries me is any image on that I have to work hard will always terrible look on the web for someone of another look at one of my images on a modern monitor. Really, I rely on the use of the web to get my content out there. Right now, they are actually more urgent for me to get the prints to the right. If people cannot take advantage of the image on the screen, they will never want to print.

  I hope it was the right place to post such a thing. This is clearly not for the lack of Photoshop that it manages to display more information than the other pieces of software in my images. I just thought that others may have had similar experiences. I'm not professional when it comes to Photoshop or photography, but I have a good few years of experience and education behind me in the topic. It seems I've reached the limit of what I can do here. It actually feels kind of pathetic for something as simple as to a jpeg of an image of high quality for the web allows only to stumble and fall.

  I find myself baffled and confused. I welcome any help on the subject and I thank you all in advance.

  Where do you have a v4 profile in this string?

  Anyway this is much like a monitor profile problem. What are you helping? He is the one that is provided by Benq (which I wouldn't trust for a second), or the default sRGB to Windows? You can find in Control Panel > color management. If this is the swap of profile of Benq for sRGB and working with it until you can afford a calibrator (you can get one for just $90 BTW).

  Normally there will be no difference between Photoshop and Firefox because they are both fully color managed and handled the same way: the document profile is converted on the monitor profile on the fly, and that is what is sent to the screen. But Firefox is known for interpreter sometimes hurt the monitor profile.

  You should also know that if your document profile is the same as your monitor profile (for example, they are the two sRGB), you basically have a managed without color string. So all appear identically with this configuration, Photoshop, Firefox, IE, no matter.

• What is reasonable memory for Firefox use?

  Title says it all-

  What is reasonable memory for Firefox use?

  The normal use, I am an average of 1.2 G or about memory (of 16 G total); is this normal? Don't not maxing out at all but I was wondering.

  How to define and measure the use of memory for Firefox? Activity monitor? I use Firefox to write this. In the activity monitor, I see Firefox to 347 MB and Firefox Web Content to 259 MB.

• which computer is best for home use, including reports and spreadsheets?

  I've been using 'other' computer for many years at work and at home, had an iPhone several years ago and at the insistence of my daughter to Apple computer, I explore the possibility of buying an Apple computer. I need to type reports and do worksheets as a Secretary for an organization. I used Microsoft Office Word and Excel and need something similar, but without all the bugs and viruses. My laptop crashed a few days ago and I lost all the data and applications. Instead of the tedious task of restore all applications, this seems to be the time of the Apple store. Any suggestions? Mac, iPad, or do you use?

  caytn,

  I suggest to start by looking at your budget.  Knowing how much you can spend on a machine will considerably reduce the options.

  I expect that the options will be one of the following:

  MOBILE NO:

  Mac Mini: $500-$2200

  iMac: $1100 - $2400

  PORTABLE:

  MacBook: $1300-$1600

  MacBookPro: $1300-$2700

  I, personally, do NOT recommend an iPad for professional use

• A Web site can store data for offline use without asking?

  In options, advanced, network, web content offline and the user data, I 'tell me when a website asks to store data for use in offline mode"checked

  And then in the box below that lists Web sites that are allowed to store data for offline use there is an entry "https://forecast.io".

  This site never asked me to store data offline, and I never did anything to him. The website showed there before, I removed it and now it's back.

  So, since I have the box checked to tell me when a site asks you, means that there is not just ask?

  Yes, a Web site can store data for offline use without asking and can do even if you have checked the option 'tell me when a website asks to store data for use in offline mode', because this option does not work correctly. See the bug: https://bugzilla.mozilla.org/show_bug.cgi?id=959985

  As far as I know, it does not mean that the site simply "did not", it's just that the option does not work (or maybe only works in the case where the data are larger than the pref in offline mode - apps.quota.warn?)

  The workaround given by cor - el above, must currently off - apps.allow_by_default set to false.