Similar Questions

• Is it possible to use EventListener for general use?

  Hello!
  Is it possible to send a parameter of a class to another? but I have a limit that I can't create an instance of this class within these classes and I can't do the functions or settings of these static classes. Is there some sort of class of earphone as EventListener, but for general use? or is it possible to use EventListener in general?

  Mad skills of Oracle really show in these forums...

  Published by: Kayaman on September 10, 2011 14:11

• where can I find the chassis for the import file in MAX to draw the circuit diagram before you buy

  where can I find the chassis for the import file in MAX to draw the circuit diagram before you buy

  chassis: NI SMU-1078

  ini file to import into MAX

  See attachment

  THX

  Hi again Koen,

  Unfortunately, you can't simulate a complete PXI system, so we do not have the ability to simulate a PXI controller unit. The simulation, you can do is to set up the cards you want to use in you.

  concerning
  Lars

• Satellite A100-480 - need Bridge Media slot driver for Windows 7

  Hallo,

  I need a "5-in-1 Bridge Media slot' DRIVER for Windows 7 64 bit. I can't find someone.
  My Notebook: Satellite A100-480

  Thank you

  Hello

  As far as I know, this device is your laptop card reader and therefore you need to download the Flash Media driver from the Toshiba page.

  I checked the page but it s is only available for the 32-bit Vista or XP :(

  You can try a driver for another model laptop but there is no guarantee that it will work. Just check out ;)

• How will I know if there is an extra slot available for my ram in my pc?

  Spoiler (Highlight to read)

   

   

  How will I know if there is an extra slot available for my ram in my pc?

  What kind of PC is it? Usually you can open the hood and look or go into BIOS and watch memory or run a program called CPU - Z to see what is in each slot.

• Please tell us the correct link for General - link does not work

  Hi, in the text to go to an appropriate forum, the links do not work for General Discussion.

  The error message says:

  Not found

  The item does not exist. It may have been deleted.

  Could you please tell correct links please? Thank you.

  This link will work - http://forums.adobe.com/community/dreamweaver/dreamweaver_general

• The attention! Error initializing PCI express slot 4 (for a PCIe used in the PXI-1033 chassis)

  Hello

  I have problems with my PXI system. When I try to contact the 1033 chassis using his high card my computer does not recognize (the PC displays the message during the start-up stage: "alert!) Error Initializing PCI express Slot 4). It was working fine before, but the chassis has been disconected with the PC on. I read that it may cause failures of communication, but I have not found a good source for this problem. Could someone help me with this problem?

  Thank you very much!

  Victor

  Hi Victor,

  Can you check something for me? One, can you try to disconnect the cable between the PXI and PCIe cards and try to restart your machine. When you do this, you still see the message? I know that you mentioned in your first point that the chassis is turned on when you see the error message, so I'm just trying to clarify what you mean by that.

  Also, it is quite easy to plug in a cable express MXI upside down, so even if point 2 you said that the links appear to be good I had to check to make sure that the cable is properly connected. You have additional cables, you can test?

• Toshiba value added logical and device for general use - what is it?

  Hello

  I completely put in place a new system on the Tecra S2, Win XP and everything. All the drivers from the site Web of Toshiba helped but now only a single 'questionmark' remains in the hardware Manager:

  Toshiba added value to general use and logical device

  I cannot find a driver anywhere or so for that. What is it indeed?
  The laptop works fine, no problem.

  Greetings,
  Ben

  I think it is (among other things) an ACPI driver...
  and you can download it-I remember...
  don't forget the 'value added package' and 'common modules' to install

• New goal for general use

  Hello

  Recently, I bought my 1st DSLR canon 50 d, and now I'm looking to get a new lens.
  I had some goals in mind, but I can't just decide. For example Canon 17-40mmf / 4l was my 1st choice good price but apparently he does well on the cameras of the harvest, and lack of IS puts me in. So there are 18-35mm F1.8 DC HSM Sigma Sigma but it is massive, and I do not know, also lack IS. Finally my 3rd choice Canon EF 16-35mm f / 4L is but a bit expensive.
  So my question is who would be better suited general purpose use a bit of landscape pictures of my portraits of cat etc.

  Thank you

  Pete

  «For example Canon 17-40mmf / 4l was my 1st choice good price but apparently he does well on the crop cameras,...» »

  This is absurd.  I used it on Rebel XTi for years.  It works very well.  If you want it, ask for it.

  "... lack of IS makes me to stop."

  You will never miss on this goal.  The other lenses are nice, but they are not in the same class as that goal, except the Canon EF 16-35mm f / 4L.  The 17-40mm is a lens, you can buy once and move it will stay with you how far you go in photography.  The others are not.  Don't forget a goal, or camera, is a sum of its specifications and not one!  Examine everything it has to offer.

• Use cRIO module NI 9477 as relay to provide 24V input for Siemens S7 - 200 (CPU222)

  Dear all, could someone please confirm my use of NI 9477 as a relay works or not with the following details. It might be stupid question, but I do not know it is not displayed before and I can't really afford to burn my modules. I have two concerns, it's sink or connection to the source, another is the question of overcurrent.

  The Siemens S7-200 is used to control an engine not by sending impulses. I provide two digital signals to control the direction of rotation of the motor. So I propose to connect my NI 9477 as illustrated in the graphic below (left configuration) relay switch.

  According to the data sheet NI 9477 (attached), I suppose I should connect it as the right configuration for NI 9477 sinking module. However, power running electric in the control cabinet is wired as a configuration on the left. I don't know if I can connect to my NI 9477 or I need to set the polarity of power supply.

  

  Another concern would be the current that runs through NI 9477. He rated at 1 a and will be connected in series with only a power supply 24VDC input digital s7 - 200. I don't know if the current could be a problem as in s7-200 datasheet, it seems that the current is only 4mA. I'm reading this correctly? I've also attached the s7-200 Datasheet if you have time to varify that, please.

  

  Thanks in advance for any help.

  Kind regards

  Jinyu

  Personally, I would just change a 9476.  9477 module looks like it's better for negative logic (24V = FALSE, 0V = TRUE).

  And running for the PLC is practically in the noise of a digital signal of 24V, so I wouldn't worry on this subject.

• Ink and the slide can be used for general use, but also Adobe applications?

  I would like to buy ink from Adobe and drag and I was wondering if it was compatible for daily use as who would use it for.

  Hey there, jellybob2

  Ink & Slide are compatible with Photoshop and Illustrator sketches draw. Find more info here: ink & Slide Help | Ink and Slide FAQ

  Thank you!

  -Kathleen

• Tutorial on the edition of Flex/Air app for Mac App Store, or simply using Developer ID for general distribution

  Everyone set up a tutorial on the publication of a Flex/AIR application for distribution as an OSX desktop application, or through Mac App Store, or just simply using the developer Certificate ID?

  In my time as a Flex developer, I've seen some well documented things and some that you had to dig for, but find clear instructions on this is really hard! I would have thought post your Flex/AIR application as a standalone application (captive runtime) users directly or through the Mac App Store (Apple Developer ID certificate signature) would be something that many people are trying to do. But most of the useful post there are dated or incomplete, as well as specifically targeted to iOS. In addition, whenever the AIR SDK changes it seems that many of the recent posts are no longer valid at certain stages.

  Many thanks for anyone who can provide some pointers or suggestions!

  The page of the official doc on presentation of the Mac App Store has been updated there is a little more than two months, recent changes in the recent SDK:

  http://helpx.Adobe.com/Flash-Player/KB/posting-air-app-Mac-app.html

  It must be current, even if I think I see typo in one of the appeals of command line that mentions "textcodesign", when it should just be "codesign".

• Relay control using cRIO LabVIEW and the NI 9472 c series module

  Hi all

  I try to get my program to run so far without success, and need help.

  I use the compact rio with the program on labVIEW and the NI 9472 digital output module. I enclose my VI.

  Basically, it's a test program to run an algorithm at a time. If I use a solid state format to get a time warp that dictates, time of execution of the algorithm. The operation by default, I put is for when the time channel produced a fake.

  Question 1: The problem I have is that even if the time string is true, as it does not run. It remains in State sending false so only of false signals to my relay (which is represented by the round LED - relay switch a solenoid on and outside).

  Question 2: If I can get 1 problem solved, the next step I have will be executing the same algorithm, but for more than a State of time. For example. "06:00" run algorithm. I want this algorithm to keep running as long as he sends signals REAL (which means the solenoid valve remains open until a WRONG signal). Then he will run again to say '08:00 ', execute the algorithm as long as he sends signals REAL and so on...

  In summary -.

  -I want to order a relay (which controls a solenoid)

  -L' use of components listed above

  -With the help of semiconductor in labVIEW (VI attached)

  -At different times, the execution of the algorithm UNTIL sends the WRONG signal and then return to the default state, which means that his waiting until the time channel product TRUE.

  Any help would be appreciated.

  Kind regards

  William

  something like that...

• How to revive the FPGA windows vi vi when you use Crio

  I want to know how to revive the Fpga vi who had stopped to host Windows vi. I want the fpga vi again by host vi again.

  When you open a reference for the FPGA VI, then you can use a method to run the VI.

• Parasio model SR1650NX: version slot PCIe for model Parasio SR1650NX

  Hello to all members,

  Had a low melting on my desk, so I dragged an old Parasio Compact of the closet in acting.

  I am trying to install an ATI Radeon HD5670 card in the 1650s PCIe slot.

  When I try to start the system after inserting the video card in the pc will not start. Fans of running like crazy, but not

  display and no progress start.

  I looked around for the years 1650 PCIe version, but found no details as the basic layout

  and designations (1 x PCIe).

  Tempting to cross reference the ATI website for my motherboard for the 5670 compatibility was like myself stabbing the

  Eye with a screwdriver... he doing badly and don't's not much else... lol

  Did he know whats going with the boot freeze?

  Thanks in advance.

  Hello:

  I can't find any concrete info, but according to the age of the chipset in your PC, I would say it is not newer than the PCIe x 16 v1.0a.

  http://techreport.com/review/7588/ATI-Radeon-Xpress-200-chipset

  https://en.Wikipedia.org/wiki/PCI_Express

  The Radeon HD5670 is a PCIe x 16 revision v2.1 map, and most of the time that they will not work on a PC with a PCIe x 1 connector. 0 to slot unless there is an update of the BIOS available for your model, which adds support for PCIe x 2.1.

  IMO, you should be able to use a graphics card with a specification file PCIe x 16 v2.0 or more, provided that it works in power supply specifications.