Integrate tablets graphics iMac Computer Lab

Similar Questions

• HP C6280 All in One Printer: unable to save the scanned document of multi page as on the single Document using the Preview on IMAC computer

  I recently reinstalled my drivers on my IMAC computer to correct some strange characters appearing when printing from Microsoft word via Parallels.  The relocation at this time and the time has fixed this problem.  My most recent issue is not able to save a scanned document of multi page into a document using an excerpt?  In the latest that I had to do was high brightness, scanned documents to be saved and presto, all were saved under one.  Now you have to go save each of them at a time.  If you have a 5-page document, you need to go through the registration process 5 separate time create several documents, which is a big waste of time.  I have also my C6280 DPL 100 size should be a problem, I think.  To correct even any help would be greatly appreciated.

  RG.

  Hi @RGrantB3,

  Welcome to the HP Forums! I'd love to help you analyze documents several pages in a single file. When you scan, you select PDF as the format scanning? When you select the PDF file, you should see an option to select, save all pages in a single file, or a variant of this option.

  If you do not see this, please post a screenshot of you scanning settings for I can visually identify the issue.

  How to take a screenshot on a Mac.         How to post a picture on the HP Forum s.

  I can't wait to hear back on your part. If this resolves the issue, please click Accept as Solution button below so that others can see what has worked for you. Thank you.

• How can I keep NVIDIA Graphics my computer? Whenever I uninstall it, it re - installs on the next stop down

  How can I keep NVIDIA Graphics my computer? Whenever I uninstall it, it re - installs on the next stop down

  which computer?

  brand model, Windows version, service pack, etc.

  If you remove Nvidia what remains to run your graphics card?

• Color print from my hp printer deskjet 5550 after installing a new iMac computer

  I try to print in color from my printer hp deskjet 5550 after installing a new iMac computer.  Do I need a printer driver for Mac, and where can I find the printer driver?  Operating system is OS X Lion mountain.

  Any help would be appreciated.

  Hello

  The HP Deskjet 5550 is not compatible with Mountain Lion and, therefore, the question appears:

  http://support.HP.com/us-en/document/c01856359

  Try the 3rd party HPIJS print drivers that seems to support your printer. don't forget to install one of the 3 downloads required below:

  http://www.linuxfoundation.org/collaborate/workgroups/OpenPrinting/macosxhpijs#Downloads_Required

  Now add the printer in Print & Scan by clicking on the menu drop-down use, and then click Select printer software.

  Select the driver HP Deskjet 5550 HPIJS in the list and add the printer.

  Shlomi

• I have LR 6.0.1 on a desktop iMac computer since I updated about 9 months ago.  I still have LR 5.7 on my Mac laptop.  How can I put the portable application 6.0.1 also?

  I have LR 6.0.1 on a desktop iMac computer since I updated about 9 months ago.  I still have LR 5.7 on my Mac laptop.

  How can I better put LR on my laptop for 6.0.1?

  The Adobe license allows 2 activations, so you would just copy your installation to version 6 files to your other computer and install the upgrade in the same way that you did on your desktop

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2017859

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  - and also read https://forums.adobe.com/thread/1146459

• all of my pdf files that I convert to .doc are not readable, why? I use an IMac computer.

  all of my pdf files that I convert to .doc are not readable, why? I use an IMac computer.

  Hi pacoatbarca,

  To open the file in.doc format, you need Microsoft Word or any other compatible application. Adobe Acrobat Reader DC app does not open Doc of PDF files.

  Thank you

  Abhishek

• the use of fonts in typekit on PC computer lab with creative cloud per device license

  We have 28 device licenses to our computer lab. Without individual ID, how can I use the Typekit fonts to these computers?

  Thank you

  Peter

  Hi Peter,.

  Online storage and services are not included within the context of the license, please visit: http://wwwimages.adobe.com/content/dam/Adobe/en/volume-licensing/pdfs/adobe-ccedu-licensin g-overview - ue.pdf

  Kind regards

  Akshay

• I moved to a new more active iMac computer are unrelated. How to re - bind the?

  I moved to a new more active iMac computer are unrelated. How to re - bind the?

  Hello

  To link the asset, you must right-click on the assets in the active panel, and choose "connect".

  Then locate the saved file.

  Kind regards

  Neha

• We installed the CS6 Suite on a computer lab. Now he opens that once then nothing opens

  We installed the CS6 Suite on a computer lab. Now he opens that once then nothing opens

  Our package is professional CC/CS6 Adobe. It is installed on Windows 7 PC.

  We have built a machine and everything works fine on that.

  We then used SCCM to capture and deploy an image from that of other PC

  Every PC made in bulk their registration as the registration process is dependent on the computer

  Solution was to deploy the license on each PC package after imaging.

  This is the resolution of the problem

• How can Hello I just transfer program from a laptop to a desktop iMac computer using an Ethernet cable

  Hello

  How can I transfer a single program and its content from a laptop computer to an iMac using an Ethernet cable

  You can network or target mode a mac computer

  OS X Lion mountain: connect to shared computers and servers for files on a network

  Share files between two computers with target - Apple Support disk mode

  However, to transfer a program is not the user data (music, photos, etc.), you must follow the directions of developers and license agreements. Some programs need to be seen to withdraw their authorization, some don't, but most require a clean install to write the necessary components in the correct places, otherwise if you are 'slide' from one place to another, you can easily inherent problems of this method.

• flashing desktop iMac computer

  10.11.6 OSx
  iMac 24 inch mid-2007
  ATI Radeon HD 2600 Pro 256 MB

  This afternoon there was a close call of thunder/lightning. I didn't know the brief storm coming, but the computer worked always fine afterwards. I stopped it immediately.

  Flashes when I restarted the desktop computer. Nothing I've done has stopped - mainly just restart and run Disk Doctor (for lack of other ideas).

  Windows Flash not, than the office. I can't up the launch bar and I can't change between desktops and split screen does not work.

  Any ideas please?

  Repair the disk for El Capitan

  1. Restart the computer and after the chime hold down the command and R until the Utility Menu appears.
  2. Disk utility and click on the continue button.
  3. Then select layouts withdrawal (usually Macintosh HD) entry of the volume of the list to one side.
  4. Click the first aid tab on the toolbar and wait for the fact button to activate. Click it, and then quit disk utility.
  5. Select restart from the Apple menu.

  If the above does not help, then follow these steps:

  Reinstall El Capitan without erasing the drive

  Please make sure that you back up.

  1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
  2. Select disk utility, then click on the continue button.
  3. Select the withdrawal (usually Macintosh HD) entry of the volume of the list to one side.
  4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
  5. Quit disk utility and re-enter the Utility Menu.
  6. Select Reinstall OS X and click on the continue button.

• Sync Android tablet Apple iMac PC -? possible

  Is it possible to sync my Tablett Harrier (Android 5.1.1) with my PC (El Capitan 10.11.4) iMac?

  I only use the Tablet for holiday or a detour out of the County, but I would like to share photos, etc. with those I visit.

  You should check the Android site on the sync with a Mac.

  You cannot use the Mac iTunes to synchronize with your tablet.

• transfer photos from the tablet to the computer?

  I just got a tablet of flow 7 hp, its my first tablet. is it possible to transfer pictures taken on the Tablet for my desktop computer?

  acclic wrote:
  

  I'm not sure I understand that. Maybe I have to clarify that I don't have a wireless account, cable, so I can't really use the Tablet unless I'm a place like the library which has free wifi.

  Ah, thank you.  You can check the thread linked in my first answer, buy a flash drive and an OTG cable and transfer files in this way.  I only did this, but it should be simple.

  Or, if you have a Wi - Fi connection, transfer photos on a Cloud free Photobucket, Google Drive service, etc., then download them to your computer at home.

  Last but not least you * can * put the photos on an SD card intalled in your tablet, then opening the case, remove the card, connect the plug in a card, and then to a computer card reader and copy the card on the computer.  It's very messy and you probably should not open the case very often.

• Very slow - Window 7, 266 mHz i7, Geforce 9800 GTx graphics card - computer was reformat hard drive, reloaded windows 7 and without other installed programs/games.

  My computer is running very slowly - i7 (quad) 266 Mhz and Geforce 9800 GTX graphics card.  I had this computer for about a year.  The problems seemed to start about 3 months when I started to play a game - Empire Total war with Steam.  The computer ran more slow and more slowly, gradually.  I tried all the clean disk, speed up programs, he worked once for a few days and then become very slow.  Finally, I backed up my files and reformat the hard drive and reloaded windows 7.  My computer has nothing loaded except windows 7 and is always very slow! Hardware issues? Help, please.

  Set of utilities to test for computer HARDWARE manufacturers:

  Note: If you are OverClocking or use an automatic overclocking or BIOS features, energy saving
  Start by disabling: Intel EIST, Turbo Mode, Cool and pretty
  and fall at the speed of stock as a starting point.

  Disconnect the other internal hard drives and external USB devices.
  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  CPU ID (CPUZ): http://www.CPUID.com/cpuz.php
  Watch the clock speed of the CPU under various conditions of loading
  (when using speed step technology Intel EIST).
  #1 Note:
  CPU - ID has two tabs (memory and SPD) that indicates the actual speed of the memory and 'SPD' tab displays the nominal speeds
  for each memory location is full.
  #2 Note:
  COMPARE the two values, the actual speed should not exceed the rated speed of your memory.

  Prime95: Displays your actual speed of the processor when using CPU ID under a heavy load.
  http://www.Mersenne.org/freesoft/
  It's a stand alone .exe file contained in an archive .zip.
  Simply choose to run the 'stress test' option for 3 hours or more.
  If your PC can pass this test, your memory and CPU
  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:
  The temperature of each core of the processor.
  Note: For the overclockers using stock radiator and cooling fan Intel/AMD, you can expect a temperature range of
  35 to 40 ° C at idle and 60-65 c max when running Prime95.
  http://www.alcpu.com/CoreTemp/

  -----------------------------------------------------------------------

  Also: Try running Memtest86 +: it runs from a floppy disk or CD, you must remove or
  confirm whether your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test - CD Bootable:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective. Test your drive with the factory utility. If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Once Windows is installed:

  Of device drivers: Have you installed latest device from the manufacturer of the motherboard drivers?
  Check their support site for the latest drivers as the CD that came with the motherboard may have
  older less stable drivers.

  Visit the download of the manufacture of the graphics card: download and install the most recent Windows 7 drivers
  for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
  or equivalent ATI.

  CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.
  voltages, temperatures, fans speed.
  http://www.CPUID.com/HWMonitor.php

  Test of Stress of FurMark GPU (graphics card):
  http://www.oZone3D.NET/benchmarks/fur/

  Pass marks burn in test: http://www.passmark.com/
  Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

  HD Tune:
  Provides information of the car and has an option (tab scan error) to test your drive.
  http://www.hdtune.com/

  SpeedFan:
  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
  It displays your drives model number and compares your drive with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php

  GPU - Z:
  A utility light, designed for you give information about your video card and GPU.
  http://www.techpowerup.com/GPUZ/

  PC WIZARD:
  A powerful utility designed especially for detection of hardware, also analyses more.
  He is able to identify a large scale of system components and supports the latest technologies
  and standards.
  http://www.CPUID.com/pcwizard.php

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  http://www.partitionwizard.com/Partition-Wizard-bootable-CD.html
  http://www.partitionwizard.com/bootable-Flash-drive.html
  Among the features and functions: create partition, Delete partition, format partition,.
  A partition resize, move partitions, Partition recovery after an accidental deletion,
  Convert the partition, partition Explore, Hide partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To complete any task use the "Pending Operations" box at the bottom left.

  Alternative to Partition Wizard (a bit easier to use, but Partition Wizard and EASUS have almost identical user interfaces)
  EASEUS Partition Master Home Edition (free):
  http://www.partition-tool.com/
  Partition software ALL-IN-ONE and the most convenient hard disk partition manager Kit
  Includes Partition Manager, Disk & Partition copy Wizard and Partition MBR and GUID partition GPT disk recovery Wizard (table) on Windows 2000, XP, Vista, Windows 7 and Windows Server 2000/2003/2008 (32-bit and 64-bit).
  It allows users to resize/move Partition, drive system extend, copy Disk & Partition, Partition merge, Split Partition, redistribute free space, convert dynamic disk, Partition Recovery and much more.

  Hiren BootCD
  http://www.Hiren.info/pages/Bootcd
  Hiren BootCD from USB (USB key)
  http://www.Hiren.info/pages/Bootcd-on-USB-disk
  (something more questions)

  UBCD4Win:
  http://www.UBCD4Win.com/index.htm
  UBCD4Win is a recovery CD bootable that contains software used for repairing,
  restoration or diagnose almost any computer problem.

  MyEventViewer - an easy way to display your event logs:
  http://www.NirSoft.NET/utils/my_event_viewer.html

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• reactivation of CS3 for HS computer lab

  Computers of some, not all, say that the number of activations available has been reached. Other does not activate.

  of course, we cannot disable install it which was there for the whole lab was reformated and updated last year.

  I downloaded the content of products download Adobe Creative Suite 3and installed from the downloads with the same problems.

  Phone support is not available and pointing me to these forums. I spent a week and a half to scouring the forums looking for answers and I try all the "solutions" can find and am not close to a fix.

  Check the answers for Jeff in the following ad... be sure that you talk to the people of Volume Licensing.  If worse comes to worse, try to send Jeff a private message...

  CS3 master collection "maximum number of allowed activations... has been achieved", previously installed on imac of 2006 which has been deleted by the management, so no way to disable, any help?