Integration of ACS 5.2 with AD windows 2000 SP4 advanced

Similar Questions

• WUSB54GC - WLAN monitor does not not on Windows 2000 SP4 computer laptop

  I have a WUSB54GC v3 and I tried to install the drivers and the WIFI monitor on a Gateway Solo 5300 laptop running Windows 2000 SP4.  When I put the disc, the installation automatically started, but stopped after a few seconds with a pop message saying, "this version of windows is not supported" (or something similar to that).  I read in this forum and learned how to manually install the driver from the disk I did.  I checked the device using troubleshooting in Device Manager and shows the driver to be installed correctly and the device works correctly.

  My big problem is that the monitor WLAN (the little green square in the bottom right of the screen) will not illuminate.  There are no available wireless networks and the monitor does not respond to the "Refresh" or anything else.  It seems to be "dead".  How can I get the monitor to work?

  Thank you!

  Mike

  WUSB54GC is not compatible with Window2000... So either you can upgrade your operating system to Windows XP, or you can go for different cards as WUSB54G.

• Windows 2000 SP4 shows no more than 1 CPU in the Task Manager

  Hi all...

  My environment:

  ESX 3.5 Update 3

  VM: Windows 2000 SP4, 2 GB of RAM, 2 Vcpu

  Problem: The Task Manager does not appear 2 CPU.

  This virtual machine has been migrated from a VMware Server 2.0 VMware Converter standalone 4.0.1 and if I add 1 to 2 Vcpu and 4 Vcpu, Manager still shows only a single CPU tasks.

  VC on, selecting the machine, performance TAB, I can see CPU 0 and CPU 1, but CPU shows minimal use.

  I have attached the 1 document with 2 images, the Task Manager and the other Virtual Center.

  Go to the Device Manager to the computer object.  If the layer Uniprocessor HAL, you need to change to Multi.  Google, a lot of info out there.

• Last version compatible with MS-Windows 2000

  What is the latest version of Firefox that has system requirements include Microsoft Windows 2000?

  The latest Firefox beta 8 version 6 supports MS Win 2000.

• How can I activate 802. 1 x in Windows 2000 sp4?

  I want to implement 802. 1 x with Windows 2000 pro SP4 and Catalyst switches. Not wireless, but via RJ45 Connecting Cable.

  How can I turn on the 802. 1 x in the W2K SP4?

  Thank you

  support for 802.1 x would come by default with SP4 because it contains the functionality of the SP3 fix to 802. 1 x (Microsoft Knowledge Base Article - 313664). After activation or upgrade to SP4 however, you must enable the automatic wireless configuration Service.

  You will notice you an Authentication tab under your Local area connection properties window after that.

  I hope this helps.

• Network does not work after Windows 2000 SP4 P2V

  It has been a roller coaster get this virtualized machine.

  A little history: this machine is Windows 2000 SP 4 with update Rollup 1. After you install the Update Rollup 1, virtualization tried it and it gets to 97% and then I get the message error "vmware agent has encountered an error. When I try to start the machine, I get a BSOD with error inaccessible_boot_device.

  After reading some discussions fo I found a solution of reconfiguing the virtual machine then it will start. So now, I have a virtual machine that will start.

  Now my problem is that networks do not work. I removed the network card, has added a new, tried static and dhcp, through the Add/Remove programs and uninstalled all the devices HP and Compaq, went into Device Manager and deleted all drivers HP and Compaq or component, rebooted countless times and I am still ending up with no network connectivity.

  The network card on the computer virtual says it is connected and he says is to receive, but not send. It is not pulling a DHCP address and a static address gets no where also.

  I have more than 50 virtual machines so I know this isn't a problem with my network, it must be on the virtual machine itself. I don't know what else to try, and I'm open to suggestions.

  Thank you!

  Have you tried to repair the winsock?

  1. Go in Start > run, type: netsh int ip reset c:\resetlog.txt

  2. Restart your computer and you're done.

  3. Follow the steps below if you have XP SP2 (this only works on windows XP SP2 and later versions).

  4. Go to regedit.

  5. Go to HKEY_LOCAL_MACHINE/System/CurrentControlSet/Services

  6. Click on Winsock and Delete.

  7. Click on Winsock2 and Delete.

  8. Close registry.

  9. Restart your computer

  10. Access the properties of the LAN connection

  11. Click the install button in the Properties window

  12. Select PROTOCOL, and then click the Add button.

  13. Click the disk...

  14. Type C:\windows\inf\nettcpip.inf in the dialog box, and click OK.

  15. Choose from the list of INTERNET TCP/IP PROTOCOL in the list, and then click OK.

  16. Click CLOSE.

  17. Restart your computer. (At this point the Winsock is complete)
      not only avoid this problem from happening in the future, but also
      to make the process much easier you update Windows.)

  Try the following steps: http://support.microsoft.com/kb/837333

• Shockwave Flash update will not install on Windows 2000 SP4?

  Does anyone else have this problem? It downloads quite well, but is not installed because of the following error: "the procedure point SetDllDirectoryW entry is not found in the KERNEL32.dll dynamic link library."

  This is for Adobe Flash 11.2.202.235. The previous (current) version was apparently discovered to not be is not so sure.

  Windows 2000 is no longer supported in current versions of Flash 11.

  • http://helpx.Adobe.com/x-productkb/multi/release-notes-Flash-Player-11.html

  It seems that Flash Player 10.1.102.64 is the last version for Windows 2000

  • http://helpx.Adobe.com/Flash-Player/KB/archived-Flash-Player-versions.html

• Satellite U400 PSU40E on Windows 2000 SP4

  Is this possible?

  Can anyone direct me where to get a full download of the drivers?
  Please email me [email protected]
  Thank you

  As far as I know, this is not possible and this newer model cell phone is certainly not possible that old operating system such as Windows 2000.

  Toshiba doesn't offer these drivers.

• Deactivation internal MS Java VM of Windows 2000 SP4 for IE6 can't use it?

  Hello.

  Anyone know how to completely disable internal Java VM of W2K SP4 without uninstalling or replace it with JRE from Sun/Oracle? I tried to disable the three options of IE6 Java VM, but that doesn't seem to work.

  Thank you in advance. :)

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  Here is the link: http://social.technet.microsoft.com/Forums/en-US/category/windowsserver

• LabVIEW 2009 .exe works only with windows 2000

  I created a simple vi with Labview 2009 for resetting a counter in the registry key. I changed it to an exe. The program works well on any machine with XP, but it does not work on the machine, that I need on which is running Windows 2000 SP4. I have installed the runtime of 2009, but I keep getting an error when it starts the vi is not executable and I need the full development to correct errors. But like I said it works everywhere else. I tried other exe wrote in LV2009 on this machine and they work. Is there something in my vi which is not compatible with Windows 2000?

  Thank you

  dkfire wrote:

  If you build an exe on a XP machine, then it will work only on XP.

  You need generate the exe on a Windows 2000 machine to make it work.

  Simply not true - even close to not being not right.

  Chris,

  My guess is that the .NET component is not present on the pc of w2k.

• ACS 5.0 with PEAP

  Hello

  I saw the following table on GBA 5.0 authentication protocols:

  Internal PEAP-EAP-MSCHAPv2 method) (with Yes

  The PEAP Protocol (with the internal method EAP - GTC) No.

  No. PEAP (with the internal method of EAP - TLS)

  EAP-FAST (with the internal method EAP-MSCHAPv2) Yes

  EAP-FAST (with the internal method EAP - GTC) No.

  EAP-FAST (with the internal method of EAP - TLS) No.

  In my opinion, this should work for all customers Microsoft windows, right? Are there today customers who still use EAP - GTC or EAP - TLS?

  Thanks in advance and best regards.

  Dominic

  Hi Dominic,

  EAP - GTC is Cisco propritary, then its meant to work with Cisco products only. But I also saw that we have an option for EAP - GTC on IBM utility.

  In order to EAp_GTC, you can use one of them:

  Cisco350card

  Cisco ACU utility

  As far as EAP - TLS is concerned, it will work with all Microsoft customers as Protocol EAP - TLS is an IETF open standard.

  EAP - TLS is supported by the following operating systems (natively):

  * Mac OS X 10.3 (or later).

  * Windows 2000 SP4

  * Windows XP

  * Windows Vista

  * Windows Server 2003

  * Windows Mobile 2003 (and above)

  * Windows THIS 4.2

  HTH

  Kind regards

  JK

• is not cold p2v windows 2000 for ESX 3.5.4 with vmware converter 4.0.2U3

  Hello

  I met a problem today, with the cold p2v windows 2000 sp4 server

  stop process to 2% saying unknown error occurred

  Here is the log of error-content (agent):

  NfcNetTcpRead: the time-out waiting for data

  NfcFssrvrRecv: failed with code = 9

  NfcFssrvr_DiskIo: have not received response from e/s

  DISKLIB-LIB: RWv failed ioId: #69 (5666) (34).

  DiskLib_Write has no sector 40960 HA - nfc: / / [Local_Storage_

  1_elcvmw02] vlzwwc02 / [email protected]:902! 52 98 d dd 00 99 72 6 b4-66 82 23 be cc 20 31 f1 with error invalid NDB error code.

  NfcNetTcpWrite: bwritten:-err 1: 10053

  NfcFssrvrSend: failure

  NfcFssrvr_Close: failed to send a close message

  NfcNetTcpWrite: bwritten:-err 1: 10053

  NfcNet_Send: asked to 264, only 8 bytes sent

  NfcSendMessage: send failed:

  BlockLevelCloning::task: Image Processing task a ISP

  LED with MethodFault::Exception: sysimage.fault.DiskLibConnectionFault

  BTW: I tried several ESXs target and I also tried a migration cold with vmware converter 3.0.x

  No idea what is the problem?

  Thanks for your help guys

  Best practices for using and troubleshooting VMware Converter

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1004588&sliceId=2&docTypeID=DT_KB_1_1&dialogID=20578335&StateID=1%200%2020576729

  * If you found this information useful, please consider awarding points for

  "Correct" or "useful."

• Internet Explorer is the best for my Windows 2000 with the Office?

  I think I have IE6 and want to upgrade to 7 or 8, but do not know if my Windows 2000 SP4 operating system is compatible... advice?

  Hello

  Your choice is easy as 2000 is not compatible IE7 or 8. I'm sorry.

  IE7
  http://www.Microsoft.com/Windows/Internet-Explorer/IE7/

  IE8
  http://www.Microsoft.com/Windows/Internet-Explorer/default.aspx

  You can add the Windows Live toolbar to get to navigation tabs
  http://smallworkarounds.blogspot.com/2008/12/tabbed-browsing-in-IE6-how-to-get-tabs.html

  Look at Maxthon that runs on the IE engine
  http://www.Maxthon.com/

  Rob - bicycle - Mark Twain said it is good.

• FF7 does support Windows 2000?

  Where are the system requirements for FF7? The only ones I found were for FF5.

  On my old Win2K computer work, the "Check for Updates" says that it is up-to-date, even if I'm running 6.02. Support Win2K dropped? I'm hesitant to start the stand-alone installation.

  Sorry, someone screwed up when they have updated this page. The download link goes to Firefox 7.0 no matter how it is labeled. System requirements have not changed since Firefox 4.0 was released, going at least as far as the Windows PC, not sure on other platforms. Windows 2000 SP4 is supported.

  I just found out that the update has been disabled due to problems with the module updates waiting to be installed during the update of Firefox is installed and the extensions "disappear" updated (or seeming to disappear). A new, different extension installation or reinstallation of the missing extension solves this problem.

  The developers are working on a solution through a 7.0.1 release, but it's maybe a few days before they can be tested and distributed.
  
  https://Bugzilla.Mozilla.org/show_bug.cgi?id=680802
  
  (Please do not comment in this bug report unless you can provide a patch to fix the problem.)
  https://Bugzilla.Mozilla.org/page.cgi?id=etiquette.html

• Tecra M2 mapping of the keyboard in Windows 2000

  Hi all

  I have a Tecra M2 on which the WinXP was removed and replaced by a new installation of Windows 2000 SP4 (I prefer not to go into detail as to why this took place).

  My problem is that the keyboard mapping is not correct under Win2000, for example if I press shift + 2 I get a @ and not a '. '. The problem exists with almost all the characters of Maj (' |,-,', ~,', ', @, #, etc..).

  Note that I don't use any software that remaps the keyboard.

  Does anyone know how this bee fixed?

  Thank you very much

  Hello

  I have the same problem on my laptop, but I don't have time to look at the problem until I saw this ad...

  Here is the answer for Windows XP, I guess it's the same for Windows 2000, because the systems are similar.

  Under start/setting/control panel, you will find the icon "regional and Language Options". Double click it and you get a new window. Select the folder "Language" then "Details". A new Windows pop up and from there you can select 'Add' services 'install '. Select your language to enter the menu drop-down, then click on 'OK '. Ensure that the value "default input language" is correct, then click 'OK' and click on 'OK '.

  Normally, the operating system needs to restart to set the hardware!

  Your keyboard should work correctly after the next system startup.

  Let me know if it works for you

  Rusty