Integration of data between sites of webcenter and trade oracle

Similar Questions

• Interruption USB Raw: flow of data between USB Raw Device and Labview!

  I do the USB communication between device (Microcontroller) Labview and USB RAW. I did all the things like the raw driver OR USB and I am able to get the 8 bytes using getusbinterrupt.vi, but my application requires continuous data transfer between pc and microcontroller, inorder to achieve that I put continuous loop in the microcontroller, so it transfers the data of continuos on pc, (in this case e.g.0 to 255 and again from 0 to 255 and so on.) , but I'm not able to get increment of 1 as written in my program, instead of that I'm getting increment of 5 to 10... is it because Microcintroller is very fast as my pc? If so how can I get continuous data without breaks...

  I enclose... graphic instant with output vi this jump of the variable data... I run my vi continuously on mode...

  Like, I would also like to write to the device with labview, can you also suggest for this also? I read messages like:

  http://forums.ni.com/ni/Board/Message?Board.ID=170&message.ID=382144&Query.ID=445342#M382144, but I am facing the same problem as this user...

  Thanks in advance.

  MRS.

  26314362 wrote:

  I enclose... graphic instant with output vi this jump of the variable data... I run my vi continuously on mode...

  MRS.

  Run a quick code continuous mode is completely unnecessary.

  In your code you continiousely who and unregster events, it takes a while, maybe the following will help to improve the code:

  

  I don't know, but you might be able to reuse the event.

  Tone

• Share data between a PC host and NEITHER sbRIO-9626 connected by Ethernet

  
  

  Hi Sophiec,

  In fact, shared Variables are a good way to share data between a host and a target. However, this is not the only way for data sharing.

  On the follow-up document, you will find different ways to do it: http://digital.ni.com/public.nsf/allkb/48D244EC86971D3986256BD4005CCC28 as:

  Shared variables
  TCP
  UDP
  DataSocket
  Other methods of Communication

   

   

  I hope this will help!

   

   

• Exchange of data between the main VI and sub - VI

  It is my first attempt to build a comprehensive program and hope you can help me.

  The idea is to load a set of data and to perform several calculations and operations on them, find themselves in the creation of a report file.

  What I want to do is to build a main VI which contains the data, and several sub - vi to do the math, dynamically loaded in a subgroup of experts (for the simple user interface). I thought about this architecture because I'm sure I'll have to change the calculation of VI, and I don't know how I'm going to need, so I can just add an another calc VI to the plugin dir and load it. The thing is, I have to keep moving data back from the main VI to the Subvi and maybe even between sub - vi. Is there an easy (or not so hard) how? I thought about queues, but sometimes the data is to be sent to more than a subvi, and I can't have a queue for each. The idea that I get is like a network producer-consumer mode BOX: the main VI produce some data and all those interested in this data use. Then they send the results back (as a "producer") and all stakeholders in the response it consumes.

  Attached, is a "skeleton" of what I intend to do.

  There are several ways you can accomplish this. First of all, you can use the Start Asychronous Call, which will provide a component of connector for you. So, it is easy to wire the reference to it. You could also implement a global functional (also known as a motor of action) to access the event reference. It is the approach we use for our shared events. If you have lines between the main VI and ths Subvi you to format a particular message reference. However, I don't think that this approach would correspond to what you are doing.

• The distribution of applications and data between the disk SSD and HDD

  I recently installed an SSD in my Macbook Pro (late 2011) instead of the DVD player. I want to install OS X on it, by replacing the current OS X on the original hard disk, I will continue to use for storing files. How should I allocate its use in car? OS X and applications on the data files on the hard disk of 500 GB and SSD?

  The first series of instructions will partition and format the newly installed SSD disk then install OS X on it. The second block will help you configure OS X on the SSD with your data on the HARD drive.

  Clean Install of El Capitan on a new disc

  1. Restart the computer. Immediately after the chime, press Command + Option + R until a globe appears.
  2. The Utility Menu appears in 5 to 20 minutes. Be patient.
  3. Select disk utility, then click on the continue button.
  4. When loading disk utility, select the drive (generally, the entry Out-bumpy) in the list aside.
  5. Click the Partition tab in the main window of disk utility. A panel will fall.
  6. Set the GUID partition scheme.
  7. Define the type of Format Mac OS extended (journaled).
  8. Click on the apply button, then click the fact when it is active.
  9. Quit disk utility and re-enter the Utility Menu.
  10. Select reinstall OS X and click on the continue button.

  How to use an SSD with your HARD drive If you want to use an SSD as boot with your existing HARD disk drive, as the disk 'data', here is what you can do. After installing the SSD, you need to partition and format the SSD using disc utility disc. Then install OS X on the SSD. Once installed OSX boot from SSD. Startup disk preferences to set up the SSD as the boot volume. Open the preferences users and groups. Click the lock and authenticate you. Or CTRL - RIGHT click on your username account list in the sidebar and select Advanced Options in the context menu. You will see a field called "Home dir: ' on the far right, you will see an Edit button. Click on it. In the file dialog box, navigate to the location in house now located on the HARD disk (disk HARD/users/user_name /.) Select the folder, click the Open button. Restart the computer, as shown. When the computer starts, it will now use the home located on the HARD drive folder. Another more technical method involving the Terminal and the alias is discussed in depth here: using OS X with a SSD and HDD - Matt Gemmell configuration. It's my preferred approach because I can choose which records of the House, I want to on the HARD drive and I don't want to. For example, I like to keep Documents and library files on the SSD because I frequently access their content. Make sure that you keep the bootable system entirely on your HARD drive where you need it.

• Import and export data between XE 10.2 and 11.2 XE

  This Oracle documentation reference link:
  http://docs.Oracle.com/CD/E17781_01/install.112/e18802/TOC.htm#autoId22
  
  This process migrates all schemas, storage, data and applications of the Apex?
  The process seems to avoid patterns associated with Apex... see exclusions...
  
  [excerpt]
  d.Export data database of 10.2 XE to the dump folder.
  
  expdp system/system_password full = Y
  EXCLUDE = PATTERN:------"AS \'APEX_%\'\",SCHEMA:\"LIKE \'FLOWS_%\'\".
  Directory = DUMP_DIR dumpfile = DB10G.dmp logfile = expdpDB10G.log
  expdp system/system_password TABLES is FLOWS_FILES. WWV_FLOW_FILE_OBJECTS$
  Directory = DUMP_DIR dumpfile = DB10G2.dmp logfile = expdpDB10G2.log
  
  I'm trying to migrate from Apex 4.1 on 10Gex on a single server, at Apex 4.1 on 11Gex on another server.
  Suggestions on the best way to achieve this?
  
  Thank you
  Rich

  Has anyone else tried this?

  I know a few people who have migrated successfully in this way. But there are many users who have failed, either because they don't follow the documentation carefully, they fell on a charset conversion problem, or that they had made the "non-standard stuff" in their database. See below.

  This process migrates all schemas, storage, data and applications of the Apex?

  In general: Yes. But there may be problems, however.
  * Charset problems:
  If you have the 'Unicode-Edition"of 10.2 XE installed right now, he probably won't a problem. If you have ISO-Charset, UTF-8 conversion can raise several issues...

  * documentation questions:
  It is not just the expdp you mentioned above. You also need the result of the 'geninst.sql', including 'gen_apps.sql' to your APEX applications.

  * No Standard stuff:
  There are some restrictions not documented in the Guide of XE, because they would be "non-standard" from the point of view XE. For example, you cannot downgrade your APEX applications, that is, if you have already upgraded to 4.1 in your XE 10.2 APEX, you must upgrade to 4.1 in your 11.2 XE before , you can import your applications.
  Another problem could be synonymous and subsidies for APEX objects your drawings may have: If you have an older version of the APEX on your delivered 4.0 with 11.2 XE XE 10.2, you'll have to re - generate these for the workflow scheme 11.2 XE manually.
  And this kind of "non-standard" things you might have done in your instance of XE 10.2... You have yourself to care. I hope that you have a list of things to watch. ;)

  -Udo

• Marshall plan: how to pass data between the main field and sub-application

  Hello

  I'm trying to load a Flex 3.5 application in Flex 4. In the process, I need to move a strong local typed object from main application to the loaded swf file. And I also have to pass a rope and a bitmap of application sub to the main application. Have an example to show how to pass data in the application domain?

  Thank you

  SW

  Define scaleContent = true, set a breakpoint on SWFLoader.as:doScaleContent and

  see if he thinks there's a swfBridge.

• Data between a fixed date and a sysdate

  It's the current scipt:

  TRUNC (a.shipped_dstamp) BETWEEN TRUNC (SYSDATE, 'dy') - 7

  AND TRUNC (SYSDATE, 'dy') - 1

  I need to display the data between 31/08/2014 and (SYSDATE, 'dy') - 1

  I don't know how to go on this subject!

  Please can someone help?

  TRUNC (a.shipped_dstamp) BETWEEN the DATE of 2014 "-08-31 'AND TRUNC(sysdate,'dy')-1

  or, perhaps more effectively.

  a.shipped_dstamp > = DATE ' 2014-08-31' AND a.shipped_dstamp<>

• Choose the date between December 1 and March 1

  I have a table in which I include the date column and the temperature.
  
  Now, I want to choose the average temperature per season per year. For the spring until autumn, it's perfectly feasible:
  
  But what about winter. Winter begins December 1st and ends March 1 of next year. Can someone help me?
  
  The result in plain language should be:
  
  Select the year (deducted from 1 December), avg (temp) of weatherdata if date between 01-dec-current_year and 01-March-next_year.
  
  year - avg (temp)
  2010 - 5 (from December 2010 1 until March 1, 2011)
  2011. 1 of dec 1, 2011 until March 1, 2012)
  2012-3 from December 2012 1 up to March 1, 2013) will be in the future.
  
  Published by: dkoetsier on August 31, 2012 05:15

  I never suggested to the group only by reference. I geve suggestion you how to calculate the name of season. Of course, you also need this season belongs to which is:

  TO_CHAR (ADD_MONTHS (Datum,-2), 'YYYY')

  Here are the two pieces of data that must be grouped together. In order to obtain the average temperature in season:

  select  case to_char(add_months(datum,-2),'Q')
            when '1' then 'Spring'
            when '2' then 'Summer'
            when '3' then 'Fall'
            else 'Winter'
          end || ' of ' || to_char(add_months(datum,-2),'YYYY') season,
          avg(temp)
    from  weerdata
    group by to_char(add_months(datum,-2),'YYYY'),
             to_char(add_months(datum,-2),'Q')
  /
  

  SY.

• How can I capture data between STX and ETX series

  I searched this forum and online for what seems like an easy question, but I have not found a good example. I have data of variable length from a serial port and I need to capture the data between the characters STX and ETX. Here's what I have, which returns all the data characters 2 when:
  
  data from Byte [] = {0x02, (byte) 0 x 03 (byte)};

  Just read bytes until you get the STX, read data until you get the ETX and sure to properly treat the ESC, which is ignore it and take the next character to what whether, without checking it to ETX or ESC.

• Select all dates between two fields txt. How?

  In a slider form 6i, I need to select all dates between two dates provided. I have two fields text Fld1 and Chp2 with the data type date. There is no table behind the two fields.
  For example
  ': FLD1: = MARCH 1, 2013;
  ': CHP2: = MARCH 10, 2013;
  
  Now I have to choose all dates between 01-mar-2013 and 2013-mar-10 '. How to do?

  Gul says:
  In a slider form 6i, I need to select all dates between two dates provided. I have two fields text Fld1 and Chp2 with the data type date. There is no table behind the two fields.
  For example
  ': FLD1: = MARCH 1, 2013;
  ': CHP2: = MARCH 10, 2013;

  Now I have to choose all dates between 01-mar-2013 and 2013-mar-10 '. How to do?

  As'salamualikum Gul

  Try this

  SELECT TO_DATE('01-MAR-2013', 'DD-MON-RRRR') - 1 + rownum AS d
  FROM ALL_OBJECTS
  WHERE TO_DATE('01-MAR-2013', 'DD-MON-RRRR') - 1 + rownum BETWEEN TO_DATE('01-MAR-2013', 'DD-MON-RRRR') AND TO_DATE('10-MAR-2013', 'DD-MON-RRRR')
  

  Hope this helps

• Site to Site VPN between Cisco ASA 5505 and Sonicwall TZ170

  I'm trying to implement a VPN site-to site between our data center and office.  The data center has a Cisco ASA 5505 and the Office has a Sonicwall TZ170.  I managed to configure the two so that the vpn connects.  Each of the firewall I ping the IP Address of the internet firewall on the other side and a desktop computer I can ping the IP Address of the firewall internal datacenter but I can't carry traffic between private subnets datacenter and desktop.  Can anyone help?

  The config below has had IPs/passwords has changed.

  External Datacenter: 1.1.1.4

  External office: 1.1.1.1

  Internal data center: 10.5.0.1/24

  Internal office: 10.10.0.1/24

  : Saved
  :
  ASA Version 8.2 (1)
  !
  hostname datacenterfirewall
  mydomain.tld domain name
  activate the password encrypted
  passwd encrypted
  names of
  name 10.10.0.0 OfficeNetwork
  10.5.0.0 DatacenterNetwork name
  !
  interface Vlan1
  nameif inside
  security-level 100
  10.5.0.1 IP address 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  1.1.1.4 IP address 255.255.255.0
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  passive FTP mode
  clock timezone IS - 5
  clock to summer time EDT recurring
  DNS server-group DefaultDNS
  buydomains.com domain name
  permit same-security-traffic inter-interface
  permit same-security-traffic intra-interface
  inside_access_in list extended access permit icmp any one
  inside_access_in list extended access permitted tcp a whole
  inside_access_in list extended access udp allowed a whole
  inside_access_in of access allowed any ip an extended list
  outside_access_in list extended access permit icmp any one
  outside_access_in list extended access udp allowed any any eq isakmp
  IP DatacenterNetwork 255.255.255.0 OfficeNetwork 255.255.255.0 allow Access-list extended pixtosw
  pixtosw list extended access allow icmp DatacenterNetwork 255.255.255.0 OfficeNetwork 255.255.255.0
  IP OfficeNetwork 255.255.255.0 DatacenterNetwork 255.255.255.0 allow Access-list extended pixtosw
  pixtosw list extended access allow icmp OfficeNetwork 255.255.255.0 DatacenterNetwork 255.255.255.0
  outside_cryptomap_66.1 list of allowed ip extended access all OfficeNetwork 255.255.255.0
  outside_cryptomap_66.1 ip OfficeNetwork 255.255.255.0 allowed extended access list all
  outside_cryptomap_66.1 list extended access permit icmp any OfficeNetwork 255.255.255.0
  outside_cryptomap_66.1 list extended access allowed icmp OfficeNetwork 255.255.255.0 everything
  pager lines 24
  Enable logging
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  IP verify reverse path to the outside interface
  ICMP unreachable rate-limit 1 burst-size 1
  ASDM image disk0: / asdm - 623.bin
  don't allow no asdm history
  ARP timeout 14400
  NAT-control
  Global 1 interface (outside)
  NAT (inside) 1 0.0.0.0 0.0.0.0
  inside_access_in access to the interface inside group
  Access-group outside_access_in in interface outside
  Route inside 0.0.0.0 0.0.0.0 1.1.1.1 1
  Route OfficeNetwork 255.255.255.0 outside 1.1.1.1 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  Enable http server
  http 10.5.0.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set esp-aes-256 walthamoffice, esp-sha-hmac
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  Crypto dynamic-map ciscopix 1 corresponds to the address outside_cryptomap_66.1
  Crypto dynamic-map ciscopix 1 transform-set walthamoffice
  Crypto dynamic-map ciscopix 1 the value reverse-road
  map dynmaptosw 66-isakmp ipsec crypto dynamic ciscopix
  dynmaptosw interface card crypto outside
  crypto isakmp identity address
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  crypto ISAKMP policy 13
  preshared authentication
  aes-256 encryption
  sha hash
  Group 2
  lifetime 28800
  crypto ISAKMP policy 30
  preshared authentication
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  No encryption isakmp nat-traversal
  Telnet 10.5.0.0 255.255.255.0 inside
  Telnet timeout 5
  SSH 10.5.0.0 255.255.255.0 inside
  SSH timeout 5
  Console timeout 0
  management-access inside
  dhcpd address 10.5.0.2 - 10.5.0.254 inside
  dhcpd allow inside
  !

  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  NTP server 66.250.45.2 source outdoors
  NTP server 72.18.205.157 source outdoors
  NTP server 208.53.158.34 source outdoors
  WebVPN
  attributes of Group Policy DfltGrpPolicy
  VPN-idle-timeout no
  username admin password encrypted
  tunnel-group 1.1.1.1 type ipsec-l2l
  tunnel-group 1.1.1.1 ipsec-attributes
  pre-shared-key *.
  !
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  message-length maximum 512
  !
  context of prompt hostname
  Cryptochecksum:7f319172e5de9c0e550804a263f8e49e
  : end

  Mattew, obvious lack of education is the rule exempt from nat for your tunnel, your access list pixtosw is similar on this example, I assume that you have gone through this link, if it does not see the configs on both sides.

  Add the statement of rule sheep in asa and try again.

  NAT (inside) 0-list of access pixtosw

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a008052c9d4.shtml

  Concerning

• Mapping data between BI and another Oracle module

  Hello
  
  I'm working on a project for a Government of a county of Florida. We have a problem with project accounting R12 data match with OBIEE 11g database. It is more of a field of marking problem than a problem of integrity of data - for example, 'Customer number' in the accounting of the project is clearly a different data set than 'Customer number' in BI. We know the same data exists in BI but we do not know what it is called and therefore how interrogate him for reporting purposes. Why data marking is so messed up, I can't say, but I was in charge of mapping 'Customer number' (and everything else) in project accounting to the equivalent of the BI field. Supposedly this mapping does not already exist (which seems impossible since someone set up the flow of data between the two parts of the system at some point!). I hope someone can recommend an approach that doesn't end up being heavy and manual. Thank you!
  
  Warm greetings to all,
  
  John

  https://support.us.Oracle.com/OIP/faces/secure/km/DocumentDisplay.JSPX?ID=1274680.1#BODYTEXT

  OR

  Oracle Business Intelligence Applications ETL Data Lineage Guide version 7.9.6.2 and 7.9.6.3 [ID 1274680.1]

  Check this box... It gives you a document of data lineage... Mapping between source and target stage and...

  It certainly helps you the way that you look.

  MAK is useful if it helps...

  Kind regards
  Rayan Vieira

• Difference between DAQmx DAQmx Base and acquisition of Legacy data

  Hello

  What is the difference between NI-DAQmx, DAQmxBase and acquisition of data Legacy and what are the characteristics of these materials

  See this FAQ.

  And it's the software, not hardware.

• What is the best way and to share data between a server and a Client app?

  Hello

  I'm trying to communicate a Client-Server application.

  In fact, I already have a simple data transfer via TCP/IP. However, I don't know yet, if TCP/IP is the best (and by that I mean, better, faster, safer, etc.)

  How to do.

  What are the cons and Pros between TCP/IP, STM and shared Variable?

  Do you recommend another type of communication in addition to these 3?

  Thank you

  Matt.

  In my view, that a general question cannot have a response says.

  Then, there is no way 'the best' for sharing data between a client and a server app.

  I like to use TCP/IP, but sometimes (when data loss is not critical) I use UPD (quick and dirty).

  I generally avoid shared variables, especially on embedded devices.

  Some other times I have I like to Exchange data in a database...

  A few other times I Exchange data using file...

  Marco