Interruption USB Raw: flow of data between USB Raw Device and Labview!

Similar Questions

• What is a USB audio device and a Bluetooth HID device?

  What is the difference between a USB audio device and a Bluetooth HID device? Is there a difference? Different connection?

  My desktop computer shows the keyboard and mouse connections wireless in both places. I thought that I had to use the receiver provided with the mmouse and keyboard kit when I bought it and now I see it installed in two locations in the Device Manager. What does that mean?

  Hi jimafia,

  Let's start first of all, make sure you have software in place just in case you need more later.

  If they are the same exact drivers, it is possible that they have been installed twice, but the biggest problem is how much of usb devices you have connected?

  You can check and see when they have been installed in the properties for each driver.

  B Eddie

• Share data between a PC host and NEITHER sbRIO-9626 connected by Ethernet

  
  

  Hi Sophiec,

  In fact, shared Variables are a good way to share data between a host and a target. However, this is not the only way for data sharing.

  On the follow-up document, you will find different ways to do it: http://digital.ni.com/public.nsf/allkb/48D244EC86971D3986256BD4005CCC28 as:

  Shared variables
  TCP
  UDP
  DataSocket
  Other methods of Communication

   

   

  I hope this will help!

   

   

• Exchange of data between the main VI and sub - VI

  It is my first attempt to build a comprehensive program and hope you can help me.

  The idea is to load a set of data and to perform several calculations and operations on them, find themselves in the creation of a report file.

  What I want to do is to build a main VI which contains the data, and several sub - vi to do the math, dynamically loaded in a subgroup of experts (for the simple user interface). I thought about this architecture because I'm sure I'll have to change the calculation of VI, and I don't know how I'm going to need, so I can just add an another calc VI to the plugin dir and load it. The thing is, I have to keep moving data back from the main VI to the Subvi and maybe even between sub - vi. Is there an easy (or not so hard) how? I thought about queues, but sometimes the data is to be sent to more than a subvi, and I can't have a queue for each. The idea that I get is like a network producer-consumer mode BOX: the main VI produce some data and all those interested in this data use. Then they send the results back (as a "producer") and all stakeholders in the response it consumes.

  Attached, is a "skeleton" of what I intend to do.

  There are several ways you can accomplish this. First of all, you can use the Start Asychronous Call, which will provide a component of connector for you. So, it is easy to wire the reference to it. You could also implement a global functional (also known as a motor of action) to access the event reference. It is the approach we use for our shared events. If you have lines between the main VI and ths Subvi you to format a particular message reference. However, I don't think that this approach would correspond to what you are doing.

• Integration of data between sites of webcenter and trade oracle

  Hello

  They mentioned in the release notes for the oracle 11 trade, we can achieve "integration of data between Sites WebCenter and Oracle trade" and it can be installed via CIM.

  But I am unable to find more information outside the line above mentioned in the release notes.

  Can someone help me get more information above topic?

  HI - documentation for the trade of Oracle / database Sites WebCenter integration available in v11 is now available (via a white paper on My Oracle Support).  You can find it here:

  https://support.Oracle.com/epmos/faces/DocumentDisplay?ID=1623776.1

• Bad drift with USB-6259 devices and acquisition of data PCI-6259

  We have both a USB-6259 and PCI-6259 installed on a single computer, linked to a SBC-68, with Matlab and Toolbox of data Acquisiution.

  For the purposes of test base, I wrote a script that generates a sinusoidal signal output based MATLAB, for a single DAC output.  I wired this single DAC output to two channels of ADC of entry.  For each sample output DAC, the script also takes a sample entry of ADC on each channel.

  --> Ideally, if everything works correctly, after you run the script, I see two channels of input ADC vector.  Tracing of each channel should give me a nice sine wave in Matlab.

  --> When I made trace data, here's what I get (see attachment).

  -->, I looked at the DAC output with an oscilloscope, and the DC offset is very close to 0 (this indicates to me that the part of output DAC works very well).

  Why is there this negative DC drift on two entries?

  Forgive my lack of knowledge - I know the difference between the DIFF and CSR connections, but I don't know where is the 'setting' for DIFF/CSR (what is a button/switch on the USB-6259 case?  Is it a software control in the code?)

• How to connect USB-ERB24 devices to labview application

  Hi iam, iam new to labview application development using NIUSB-9421 as module input and USB-ERB24 in the output module. I have sucessfully added NIUSB-9421module to my application using 'Digital IO DAQmx create Virtual Channel.vi'. But cannot add this module USB-ERB24 iam. Can someone please tell me how to detect "USB-ERB24" this module for my labview application please tell me...

  I don't think that you will be able to use DAQmx with MCC USB-ERB24. You must run InstaCal (driver of MCC) to install the USB-ERB24 and get a card number for this unit (and build your application with the MCC screws).

  

  I have LV2009 and I'm not able to open your USB_ERB24_test.vi.  The attachment is for USB-ERB24.

  Jean-Marc

• The distribution of applications and data between the disk SSD and HDD

  I recently installed an SSD in my Macbook Pro (late 2011) instead of the DVD player. I want to install OS X on it, by replacing the current OS X on the original hard disk, I will continue to use for storing files. How should I allocate its use in car? OS X and applications on the data files on the hard disk of 500 GB and SSD?

  The first series of instructions will partition and format the newly installed SSD disk then install OS X on it. The second block will help you configure OS X on the SSD with your data on the HARD drive.

  Clean Install of El Capitan on a new disc

  1. Restart the computer. Immediately after the chime, press Command + Option + R until a globe appears.
  2. The Utility Menu appears in 5 to 20 minutes. Be patient.
  3. Select disk utility, then click on the continue button.
  4. When loading disk utility, select the drive (generally, the entry Out-bumpy) in the list aside.
  5. Click the Partition tab in the main window of disk utility. A panel will fall.
  6. Set the GUID partition scheme.
  7. Define the type of Format Mac OS extended (journaled).
  8. Click on the apply button, then click the fact when it is active.
  9. Quit disk utility and re-enter the Utility Menu.
  10. Select reinstall OS X and click on the continue button.

  How to use an SSD with your HARD drive If you want to use an SSD as boot with your existing HARD disk drive, as the disk 'data', here is what you can do. After installing the SSD, you need to partition and format the SSD using disc utility disc. Then install OS X on the SSD. Once installed OSX boot from SSD. Startup disk preferences to set up the SSD as the boot volume. Open the preferences users and groups. Click the lock and authenticate you. Or CTRL - RIGHT click on your username account list in the sidebar and select Advanced Options in the context menu. You will see a field called "Home dir: ' on the far right, you will see an Edit button. Click on it. In the file dialog box, navigate to the location in house now located on the HARD disk (disk HARD/users/user_name /.) Select the folder, click the Open button. Restart the computer, as shown. When the computer starts, it will now use the home located on the HARD drive folder. Another more technical method involving the Terminal and the alias is discussed in depth here: using OS X with a SSD and HDD - Matt Gemmell configuration. It's my preferred approach because I can choose which records of the House, I want to on the HARD drive and I don't want to. For example, I like to keep Documents and library files on the SSD because I frequently access their content. Make sure that you keep the bootable system entirely on your HARD drive where you need it.

• Import and export data between XE 10.2 and 11.2 XE

  This Oracle documentation reference link:
  http://docs.Oracle.com/CD/E17781_01/install.112/e18802/TOC.htm#autoId22
  
  This process migrates all schemas, storage, data and applications of the Apex?
  The process seems to avoid patterns associated with Apex... see exclusions...
  
  [excerpt]
  d.Export data database of 10.2 XE to the dump folder.
  
  expdp system/system_password full = Y
  EXCLUDE = PATTERN:------"AS \'APEX_%\'\",SCHEMA:\"LIKE \'FLOWS_%\'\".
  Directory = DUMP_DIR dumpfile = DB10G.dmp logfile = expdpDB10G.log
  expdp system/system_password TABLES is FLOWS_FILES. WWV_FLOW_FILE_OBJECTS$
  Directory = DUMP_DIR dumpfile = DB10G2.dmp logfile = expdpDB10G2.log
  
  I'm trying to migrate from Apex 4.1 on 10Gex on a single server, at Apex 4.1 on 11Gex on another server.
  Suggestions on the best way to achieve this?
  
  Thank you
  Rich

  Has anyone else tried this?

  I know a few people who have migrated successfully in this way. But there are many users who have failed, either because they don't follow the documentation carefully, they fell on a charset conversion problem, or that they had made the "non-standard stuff" in their database. See below.

  This process migrates all schemas, storage, data and applications of the Apex?

  In general: Yes. But there may be problems, however.
  * Charset problems:
  If you have the 'Unicode-Edition"of 10.2 XE installed right now, he probably won't a problem. If you have ISO-Charset, UTF-8 conversion can raise several issues...

  * documentation questions:
  It is not just the expdp you mentioned above. You also need the result of the 'geninst.sql', including 'gen_apps.sql' to your APEX applications.

  * No Standard stuff:
  There are some restrictions not documented in the Guide of XE, because they would be "non-standard" from the point of view XE. For example, you cannot downgrade your APEX applications, that is, if you have already upgraded to 4.1 in your XE 10.2 APEX, you must upgrade to 4.1 in your 11.2 XE before , you can import your applications.
  Another problem could be synonymous and subsidies for APEX objects your drawings may have: If you have an older version of the APEX on your delivered 4.0 with 11.2 XE XE 10.2, you'll have to re - generate these for the workflow scheme 11.2 XE manually.
  And this kind of "non-standard" things you might have done in your instance of XE 10.2... You have yourself to care. I hope that you have a list of things to watch. ;)

  -Udo

• Marshall plan: how to pass data between the main field and sub-application

  Hello

  I'm trying to load a Flex 3.5 application in Flex 4. In the process, I need to move a strong local typed object from main application to the loaded swf file. And I also have to pass a rope and a bitmap of application sub to the main application. Have an example to show how to pass data in the application domain?

  Thank you

  SW

  Define scaleContent = true, set a breakpoint on SWFLoader.as:doScaleContent and

  see if he thinks there's a swfBridge.

• can someone help me understand how to get a driver usb mtp device and base system device online?

  Pavilion dv7 1245ca

  Awesome. It's a nice phone you understand not what operating system you were using so I couldn't connect download, but here is the link to the download page for the SIII. Everything you need to do is find the right operating system you use.

  http://goo.GL/GZcLP

  I hope this helps!
  Sean

• Creating application for archiving of data from the mobile device in LabVIEW.

  Hi guys I need help for my application. I need to connect my phone with the PC via USB and then open Explorer with files and folders, that are in the phone, mark and saved and choose the obligations imposed. Something like in this video just in LabVIEW.

  Can you help me? I am a beginner in LabVIEW, so please consider.

  Thank you.

  
  

• Problems of synchronization between a mobile device and Windows Mail

  I use Windows Mail 6.0.6000.16386 version (vista_rtm.061101 - 2205) on my Vista machine.

  T1) when I synchronize my contact numbers of my mobile (Nokia) to my Windows Mail Contacts using the supplied software (Nokia PC suite), I find that if a certain person/entity contact stored in mobile, to say Mr. X or Company Y, 4 phone numbers, only 1 or 2 of them get copied into the Windows Mail contacts folder other numbers not copied anywhere. What is the reason for this, and how can it be rectified it IE. all the associated with a given contact phone numbers must be copied across everything by synchronizing?

  Q2) I have 2 mobile, each for himself, and wife. Each mobile has its own set of contacts. During synchronization with Windows Mail, I found that all the contacts from mobile 2 copied in a single database of Contacts in Windows Mail and vice versa so in each mobile. So my contacts appear in the motive of my wife, as well as its own contacts, contacts appear in my mobile, as well as mine.  Is it possible in Windows Mail by which we create separate databases for each set of contacts in the mobile phone, so that when you run a synchronization between my phone and Windows Mail, only my contacts updated in 'ma' database and in my phone, then when the mobile synchronization of my wife with Windows Mail and only its contacts updated in 'his' database and his mobile phone.

  Thank you very much!

  Hello

  I think many other users of Nokia's reported problems with this PC Suite software. I suggest you look on the Nokia forums for support with this specific software, as it is a question of Nokia PC Suite and not a Windows Mail or Windows issue.

  As for your second question, you need to create a second account using Windows Mail and helps to keep the boxes to the letters and separate records:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/how-do-i-create-separate-inboxes-in-Windows-Mail/c5a458af-7d8b-4def-a3f5-bd425a2c519e

  What happened to e-mail identities?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-e-mail-identities

• IPSec between an IOS device and a PIX

  Hello

  I'm not able to successfully establish an IPSec tunnel between an IOS (2600 router) box running 12.3 (9) and PIX501 pixos 6.2 running. I see the following error on 2600.

  * 06:09:50.416 Mar 10: ISAKMP (0:1): retransmission phase 1 MM_SA_SETUP...

  * 06:09:50.416 Mar 10: ISAKMP (0:1): will increment the error counter on his: broadcast

  Phase 1

  And on PIX501 following error message:

  ISAKMP (0): ITS been pre-shared key, using id ID_IPV4_ADDR type authentication

  to return to the State is IKMP_NO_ERROR

  crypto_isakmp_process_block: CBC 9.8.1.2, dest 9.2.1.2

  Exchange OAK_MM

  ISAKMP (0): processing KE payload. Message ID = 0

  ISAKMP (0): processing NONCE payload. Message ID = 0

  ISAKMP (0): load useful treatment vendor id

  ISAKMP (0): load useful treatment vendor id

  ISAKMP (0): Peer Remote supports dead peer detection

  ISAKMP (0): load useful treatment vendor id

  ISAKMP (0): addressing another box of IOS!

  ISAKMP (0): load useful treatment vendor id

  ISAKMP (0): provider v6 code received xauth

  to return to the State is IKMP_ERR_RETRANS

  crypto_isakmp_process_block: CBC 9.8.1.2, dest 9.2.1.2

  Exchange OAK_MM

  I am able to ping the external interface of a box form another. Any idea what I might be missing?

  Thanks in advance,

  Krishna

  The commands that I configured on 2600 as follows:

  crypto ISAKMP policy 1

  md5 hash

  preshared authentication

  Group 2

  life 1200

  cisco key crypto isakmp 9.2.1.2 address

  ISAKMP crypto keepalive 50 10

  !

  life 1800 seconds crypto ipsec security association

  !

  Crypto ipsec transform-set esp - esp-sha-hmac krishnas

  !

  !

  Krishnas 1 ipsec-isakmp crypto map

  defined peer 9.2.1.2

  game of transformation-krishnas

  match address krishnas

  !

  !

  !

  !

  interface FastEthernet0/0

  IP 192.168.243.1 255.255.255.0

  automatic speed

  full-duplex

  !

  interface FastEthernet0/1

  Description outside the interface to the cloud

  bandwidth 10000

  IP 9.8.1.2 255.255.0.0

  automatic speed

  Half duplex

  card crypto krishnas

  !

  !

  krishnas extended IP access list

  IP 192.168.243.0 allow 0.0.0.255 192.168.244.0 0.0.0.255

  The commands that I configured on PIX501:

  IP 192.168.244.0 allow Access-list krishnas 255.255.255.0 192.168.243.0 255.255.255.0

  Permitted connection ipsec sysopt

  Crypto ipsec transform-set esp - esp-sha-hmac krishnas

  Krishnas 1 ipsec-isakmp crypto map

  card crypto krishnas 1 corresponds to the krishnas address

  krishnas 1 peer set 9.8.1.2 crypto card

  card crypto krishnas 1 the transform-set krishnas value

  krishnas outside crypto map interface

  ISAKMP allows outside

  ISAKMP key cisco address 9.8.1.2 netmask 255.255.255.255 No.-xauth No.-config-mode

  isakmp identity = address

  ISAKMP keepalive 50 10

  part of pre authentication ISAKMP policy 1

  of ISAKMP policy 1 encryption

  ISAKMP policy 1 md5 hash

  Group of ISAKMP policy 1 2

  ISAKMP policy 1 life 1200

  Hello Krishna

  If possible and feasible to try and downgrade the IOS 12.3 (9) to a low-level code as 12.3.6. But, make sure that the image is a single k9 and supports VPN. Also upgrade the pix to 6.3.3.

  Assuming that the keys are the same, your configs find ok. Him debugs it seems its not able to pass from the phase 1 properly

  could contribute to modify the code.

  Concerning

  Wakif

• Or ASM, raw devices, and performance issues

  Hello
  
  I was recently become familiar with ASM. Because I did that in 'play' VM boxes, it was not possible to draw conclusions on performance improvements.
  
  I would like to know what improvements performance forum members may have experienced after the migration of a production environment to a no - ASM to ASM configuration installation.
  
  It would seem that, since the DSO is a 'form' of crude device that the increase in performance should be noticeable. Was this the case for those who have emigrated to it? It was improving the performance or it only to facilitate the management of the database easier?
  
  Thank you for your contributions on the subject,
  
  John.

  440BX - 11 GR 2 wrote:

  I'm not sure what you mean by "hotspots", can clarify you a bit?

  John, to add to what Aman said rebalancing.

  Imagine the following scenario. New storage array must replace the old. You must move the entire database across from the old to the new. The existing storage array may have 20 x 128 GB lun. The new table will provide you with 5 x 1 TB lun.

  How do you do that without a single second of downtime? You use ASM.

  You will have an existing diskgroup of 20 aircraft. ASM, you draw these of being abandoned. Also using ASM, you add 5 new devices to this same diskgroup. Then, you issue a command of the ASM rebalancing. Close the session. And have a good night sleep from the operational database.

  The next morning that all data on the LUN 20 should have been distributed on the 5 new LUNS and the 20 released MON - ready to be physically removed and reused elsewhere. (you can set the "aggression" of the rebalancing operation - will be the more aggressive, more resources i/O that it will consume and faster the process of rebalancing).

  And even better - not a single second of downtime for maintenance. Compare this with the help of a storage provider (EMC comes to mind) and have to do this exercise using their s/w and the approach and the ASM not... No comparison at all. ASM is vastly superior in this regard, because it is specifically designed for the storage management problems we have to solve with an Oracle database.