Integration of the RGS with view Agent and Client Protocol

Similar Questions

• What will happen with my agent and active Windows 8, I will have bought with the laptop after I swap HDD with SSD?

  Original title: replacement disk and windows.

  Hello guys.

  I am considering buying a new laptop. The model that I found and I like has a HARD drive if I want to replace it with the SSD to the format of my previous laptop. (Due to the low energy consumption, greater speed, etc.). So I have a 256 gb SSD in my previous loan of laptop replace new one HARD disk, yet what will happen with my agent and active Windows 8, I will have bought with the laptop?

  I can reinstall windows 8 on the SSD, but I don't have a key to activate their... How will I be able to get the key from previous series if the laptops will only work with a recovery partition these days here? I asked a guy in the store, I buy my laptop since and he told me that he does not know and I have to ask for help. However, to create a message of support I need a serial number of the model I did not because I have not yet bought a laptop, so I don't know what to do... I really don't want to stick with the HARD drive, but also I can't afford another model.

  Is it possible to do a recovery with my laptop disk when I get it, then replace the drive with my SSD and run the recovery disc I made?

  The laptop I want to buy is an Asus if that helps...

  Thanks in advance...

  The 'Raw' State is not necessary, it is the State of any drive (SSD drive or hard drive) would be in if you just remove a disk new in box and will need to be "initialized", since you have already used the player already initialized sound.

  Do not format the drive, rather than delete all existing partitions, (the SSD shows then as being "unallocated"). Now you are ready to restore the backup Image you created. During the restore process Acronis will recreate the partitions that were on the hard drive on your SSD.

  J W Stuart: http://www.pagestart.com

• Integration of the IPM with EBS

  Everybody, hell
  
  My IPM server: 11.1.1.3 version (linux)
  Server version: EBS R12
  
  I m following the sub process.
  
  
  Document download (for KFI) through document capture, then it goes to the IPM server.
  Then, in Server EBS, click the zoom button, browser task IPM page is open.
  Open as user1:
  Push data into EBS seeking task IPM viewer data.
  Save it in EBS. Click on the approval of the Bill, give an authorization to obtain data to a particular user.
  
  Log in as User2: not found a job.
  
  Error in the BPEL instance is as below:
  
  
  * < part name = "summary" > *.
  * < Summary > Exception occurred when the link was invoked. Exception occurred during invocation of the JCA binding: "binding JCA execute operations reference 'Get_InvoiceTransaction' have to: Interaction processing error." Error during execution of the BPEL_RETRIEVEINVOICE processing. Interaction AXF_VALIDATION_IMPORT_PKG$ RET API. An error occurred during the processing of the interaction to call the BPEL_RETRIEVEINVOICE. AXF_VALIDATION_IMPORT_PKG$ RET API. Cause: java.sql.SQLException: invalid name model: AXF. AXF_VALIDATION_IMPORT_PKG_R_I '.» The called JCA adapter threw an exception of resource. Please review the error message above carefully to determine a resolution. < / Summary > *.
  * < / piece > *.
  * < part name = 'detail' > *.
  * < model name invalid detail >: AXF. AXF_VALIDATION_IMPORT_PKG_R_I < / detail > *.
  
  
  If someone can tell what packages are used to integrate IPM and EBS.
  
  Here are the names of sql file for the integration of the IPM with EBS:
  
  PATH\CREATE_TEMP_TABLE. SQL;
  PATH\AXF_VALIDATION_IMPORT_PKG.SQL; s
  PATH\AXF_VALIDATION_IMPORT_PKG_BODY. SQL;
  PATH\AXF_PREIMPORT_CUSTOM_PKG. SQL;
  PATH\AXF_PREIMPORT_CUSTOM_PKG_BODY. SQL;
  PATH\BPEL_11G_IMPORTINVOICE. SQL;
  PATH\BPEL_PLACEIPMVALIDATIONHOLDSON. SQL;
  PATH\BPEL_PREIMPORTCLEANUP. SQL;
  PATH\BPEL_UPDATEHOLDLIST. SQL;
  PATH\BPEL_VALIDATEINVOICE. SQL;
  PATH\BPEL_RETRIEVEINVOICE. SQL;
  PATH\BPEL_GETORGID. SQL;
  PATH\EBS_CREATE_HOLD_LOOKUP. SQL;
  
  
  Please answer me ASAP.
  
  
  Regarding
  
  Jyoti

  The problem with the documentation, is that there is no mention of these SQL files that need enforcement. Those that must be performed and visible in the schema of the user of the DB that you configured in your DB Adapater. There are many stored procedures using the model of Accelerator AXF appearing in these SQL. I believe (from memory) is grant it access to one, but I do not see that in your list, and you list looks like also a bit incomplete, which version of the model are you using?

• How to get the angles of view (horizontal and vertical) camera?

  How to get the angles of view (horizontal and vertical) camera?

  The horizontal and vertical field of VIEW properties are available with the camera_get_physical_property() function.

  Who is using the C API of the photo. I don't think that you can access by using the control of the camera of Cascades.

• How can I make the popup with empty fields and create new record?

  I would use a popup create new record.
  I created an af:popup drag and drop a data control VO in jsff. Then, I created a button and place an af:showPopupBehavior. I was able to pop-up window by clicking on the button.
  However, the window filled with information from the record 1. and when I select a record in the table and click on the popup, the popup is filled with this record.
  How can I make the popup with empty fields and create a new record by recording the popup?
  Thank you

  Hello

  You must call the CreateInsert for the underlying ViewObject operation when opening the popup because it does not allow to clear the input field, you must have a new record created

  Frank

• Windows installed the automatic windows update agent and I would appreciate help with the settings option in this newly installed agent update so no update never install or download unless I choose to do.

  Hello.

  I have windows vista 32 bit home edition.

  Today somehow automatically installed windows ' automatic update agent 747600226

  I always keep my settings to check the updates but let me choose whether to update or install.

  With this new "update automatic agent" which automatically installed on my system, I want to make sure I have place it properly so that it remains in the same way that I always have my settings but two settings (options), he checked, and are confusing for me to know what those checked settings will do.

  I would like to help you with these settings to make sure that the update is still as I want.

  Below chose correctly when the new program installed today.  That's how I still want the settings to be:

  Look for updates but let me choose whether to update or install

  Please let me know if I need to change all the options account required in addition to this update agent to ensure that only, I choose to update or install.

  There are four options and a box is in two and I don't know if I should remove the check marks or not.

  Here are the other four options that I need to know how to configure it so that only I have update/install.

  Once again, the download automatic microsoft today (update automatic agent 7.4.7600.226) without asking for my incentive preset automatic update options and that's what I'm trying to make sure is set correctly so that nothing installs or updates without asking me or let me do.

  Option 1: (this option is checked. If I leave it checked will be it install or warn me only?)

  Give me updates recommended in the way I receive important updates.

  Option 2: (this is not checked and am not worried about this one)

  Allow all users to use installed on this pc.
  
  Option 3: (this is checked and want to know if should uncheck; what I don't want is any what to auto install, but the wording of this option and option 1 are vague because of the "give me " so I don't know what it means or will do.)  If this box is left to it automatically update/install?)

  Give me updates for Microsoft products and looking for new optional microsoft software when I update windows

  Option #4 (this is not checked, and I am not concerned about this).
  
  See the notification me detailed when new microsoft software is available.

  Thank you very much for your help.

  Take care! :)

  Hello

  The Windows Update automatically updates the updater (himself), regardless of your settings.

  1. Yes it will alert you so you can update or install.

  2. check if you need more of yourself (other users) to be able to select and install the updates.

  3. it will let you know when they become available.

  4. just gives the news of additional details about some of the updates.

  Looks like you're ready for anything you like.

  Rob - bicycle - Mark Twain said it is good.

• Download 12.5.1.21 and lots of photos of work in the tabs of the ARTIST do not show the artist, only a graphic of a microphone. I had before the artist with their photos, and now I can't. How can we get them. ?

  Before when I have to click on the 'artists', all my artist art 12.5.1 on the sidebar appears. Now most of the artists album covers appear only a chart from a microphone in light pink, blue and clear.  However, when I click on 'albums', all album covers are not displayed correctly.  Review of my library, all the artwork for each song, and the album is installed correctly.   How to get the picture of the work on the 'artists' on the sidebar tab?  How can I do to reinstall the work of artists.  Help!

  Richard

  Yours is probably the clearest explanation of the issue of iTunes with the "artists". Could you put a picture of the "artist's impression" so that we can see the problem?

  (I guess that other "views" - recently added, Albums, songs and Genres - work very well.

  Thank you!

• I have a problem with my e-mail and a web site that is being built for me, I can't see the pictures with my email and other sites, I think that it can be connected

  I don't mind someone contact me directly, my email address is * address email is removed from the privacy *.

  Please be aware that I am not technically excellent, I am in my 50s and gave this computer as a gift, otherwise I would have never had a. Thank you
  

  "sabnazzy" wrote
  > please be aware that I am not technically excellent, I am in my 50s and has been
  > given this computer as a gift, otherwise I would have never had a.
  > Thank you
   
  First, you will need to explain so a little better the problem I have and
  others can understand.
  What can I do
  (1) you have a Web site designed for you, that is being
  construction.
  (2) somewhere on this site Web is a mailer - is it a form? - or does just
  link to the browser's default e-mail program?
  You are unable to view photos sent in emails or from the site
  or other sites?
   
  I'm confused-, but we need to know a few things
  (1) what mail client do you use? Outlook Express? Hotmail? Windows Live
  The post office? something else?
  (2) what EXACTLY the e-mail looks like when it happens with you? -t - it
  There he can't open attachments? or is there another problem
  reports?
   
  with more details and responses above, we can begin to get
  somewhere.
   
  HTH
  --
  Noel
   
   

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC

• What is the network access Protection Agent and when should it be on?

  It seems to be disabled by default in the Action Center Security Section.  What does if it is turned on?

  Hello

  The network access Protection agent service collects and manages health information for client computers on a network. The information collected by the NAP agent are used to ensure that the client computer has the required software and settings. If a client computer is not compatible with the health policy, it can be equipped with restricted network access until their configuration is updated. Depending on the configuration of health policies, client computers may be automatically refreshed allowing users to quickly regain full network access without having to manually update the computer. By default, the startup type of Network Access Protection (NAP), agent service is manual under services.msc.

  See also:
  What is the network access Protection?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-network-access-protection
  Networking of information that it pros

  http://Windows.Microsoft.com/en-us/Windows7/networking-information-for-it-pros

• Integration of the TPM with 2 different areas AD

  Hi people,

  We have an obligation to incorporate 2 different areas with OVD AD and provide a single view of the data from the announcement of foreign principals of the follow-up to the announcement that the Member in the Group AD1 attribute value is set to the AD2 user objectSid.

  
  

  I created the maps below and custom plugin as part of the implementation:

  • Created an AD adpater to AD1 Directory(AD1 Group adpater) Active traction groups - main card
  • Created an AD adapter to users to get AD1 Active Directory (adapter user AD1)
  • Created an AD adapter to users to get AD2 Active Directory (adapter AD2 user) - link adapter
  • Created join adpater so that data on top 3 adapters can be provided in a single view (join adaptor)
  • Custom plugin was created to replace the Member of the group attribute in AD1 containing the value objectSID with the corresponding user DN AD2
  • Custom plugin extends the BasePlugin interface and the inti() and postSearchEntry() method overides

  The custom plugin triggers when I connect to OVD through any LDAP browser and navigate the view and the custom plugin does its job to replace the member attribute in AD1 with the DN of the user of AD2, but when I run the ldapsearch to OVD to return the Member for any particular user (Member = cn = < UtilisateurDN >) I do not see my custom plugin to trigger and the ldapsearch is passed to the AD1 where it has no Details on the user DN but only the objectSid of the user.

  After investigation, implemented the get() method in my custom code to transform the search filter incoming (Member = cn = < UtilisateurDN >) with the objectSid (Member = cn = < objectSid >) and past the filter changed to the chain.nextGet () method.

  In the journals of backend, I can see the custom plugin is triggering and turning the filter and passing to AD1 and custom plugin print groups that belongs to the user, but I don't see any results for the ldapsearch command.

  Counsel on this will be highly appreciated.

  Thank you

  Simo

  You will still need to run super.get () when there is any result to add.

• What is the problem with Distiller? and Distiller Server?

  I used to use distiller to make my PDFs a smaller size file more optimized. A few months ago we have updated CS4, well everything that was before any version of CS. So for these last months, I had no problems at all making it reasonable size/quality PDF directly from ID... Yes, so I still want to know, is at - it not necessary at all for distilling make file sizes even smaller than the straight lines of ID?... or I just think, all these parameters are avilable in export ID.

  .. do you a large volume in which to use Distiller Server? Does this sound right?

  Adobe actually deal with enourages users to use the direct-to-PDF route without distilling since it is a richer conversion. Distiller is used via Microsoft Agent (and the PDF Maker) as another method of creating PDF files (via postscript [and sidecar with PDF Maker]) and indeed, sometimes professional users who need to distill server for a large number of operations of PDF creation.

  Distiller Server is not available for Mac.

  Jon

• Question related to the entrance with pci 6221 and SCC 68 analog

  I use 6221 PCI and SCC 68 analog read of voltage between the terminals of the drain and the source of a transistor. The drain is at 0 Volt and source is connected to 5 volts via a 100 k resistor. The transistor is used as a follower of the source, and therefore the output is measured at the source of the Terminal. When I measure the voltage by using oscilloscope, I see clearly the change of output as a result of change of voltage of the door. But, when I try to acquire the same by using labview, I see nothing. I tried to change the signal to the CSR, NRSE, but nothing works. Seems to be that something related to differences in impedance. Can you please advice me on this issue? Thanks in advance

  Hi rsd111,

  I understand that you measure a circuit similar to this ( http://en.wikipedia.org/wiki/Common_drain)

  I also get that you use an external power supply with GND connected to the Drain and - 5V connected to the Source with a 100 k resistor.

  You should be able to measure the tension between D and S setup a differential measurement and connection Ai0 + D and Ai0 - s, in fact you can youse Ain you prefer.

  You should be able to do the same measure also at configuration NRSE linking Ai0 AiSense at the Source and drain.

  The Board's input impedance is greater than 10GOhm, it must behave as the oscilloscope in pairing mode high-impedance DC.

  6221 specifications: http://digital.ni.com/manuals.nsf/websearch/8117DF4C5A29C95C862573020061023B

  Nice day.

• I lost the sidebar with clock, calendar and puzzle on it. How can I get that back

  I got the sidebar with the calendar and clock and a puzzle on this subject. I moved the computer and inadvertently press the button to hide? I don't remember how I did these on my screen can you help me?

  I got the sidebar with the calendar and clock and a puzzle on this subject. I moved the computer and inadvertently press the button to hide? I don't remember how I did these on my screen can you help me?

  You mean component Windows and Gadgets.  (<-- that="" is="" a="" link,="" click="" on="">

• Change the computer name in the network discovery, view old and new names and get error code 0 x 80070035

  I changed the computer names of computers each with windows 7 and a home network sharing. Network discovered each poster now the old and new names. I also have an error code 0 x 80070035.

  How can I get rid of the old names?

  Hello

  Are you able to access computers using the names?

  Step 1: Check out the link to learn how to delete the old name and create a new name:

  Change the name of your computer:

  http://Windows.Microsoft.com/en-us/Windows7/change-your-computer-name

  Step 2: Refer to the section below for more information to correct the error 0 x 80070035 and steps.

  Open the homegroup troubleshooting utility

  http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

  Error 0 x 80070035 appears if you are not able to access the network computer. Follow the instructions in the thread below if you are faced with a similar question:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/Windows-7-error-0x80070035-when-trying-to-share/d8168c72-D51C-41C3-8B8F-3b6bb7f65f43

  It will be useful.

• Windows 8 is blocked at the (screen with space needle and mountains) Welcome screen after update.

  I have installed the latest updates and I'm stuck on the Welcome screen.  Network connection indicator has a red x through it and none of my usb devices work.  When I unplug all devices and connect just the keyboard its has lights (CapsLock Maj and stop scroll) but when I click on them nothing happens (keyboard does not work).  The keyboard and mouse work in bios.

  I'm not sure what to do, and I can't understand how to start in safe mode as I used with windows 7 and before.
  Any help would be appreciated.  Thank you.

  Hello

  Once the computer is started, click with the right button on the icon in the bottom left of the Windows desktop and select RUN...

  Type msconfig and click OK...

  In msconfig, click on the STARTUP tab and check the box START SECURE and restart your computer... If using a fingerprint reader do not use this function unless you know the alternate password. Otherwise you download locked...

  You can also get the execution by opening the Task Manager...

  Click on FILE and then 'run the new task '.