Running the server failed and BitLocker on Win 7 Ultimate
I'm having the following problem:
When I try to launch windows explorer once the connection, I always get the error:
"Server execution failed".
So I can't open my D drive since the Explorer (corresponding to all my data and that is encrypted with BitLocker in Windows 7 Ultimate 32-bit).
I recently found a work around. I start FreeFileSync (no error) which is a program that compares and allows the synchronization of two directories. I can with the right button on the D drive and unlock the drive by providing the BitLocker password. No matter what program with an order opening the file would work too.
After I unlock the D drive, Windows Explorer gives me no more problems until I restart.
It is a permanent way of this problem. I'd appreciate any help.
A little history:
----------------
The problems started after I changed the location of the directories under my user name (desktop, Documents, pictures, etc.) the disk hard D. aware that this could be the cause, I back return office locations, links, Contacts, & research (using a default restore). The rest is media (for example, photos etc) so I left it to D.
This has not solved the problem.
I checked thekeys in the registry, they are correct:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders\Personal
HKEY_CURRENT_USER folders
Thanks for your help Elsa,
Unfortunately, the fix didn't settle. I got a: "update is not applicable to your computer".
However, when I read the 244677 support document, I noticed checking option: option of folder windows in a separate launch process has been involved in the issue. Then, when I checked it offshore (I usually check it out on when I install Windows) everything returned to normal.
That does for me, it is not essential for me to have it on even though I usually do, but it might be something to look at...
Thanks again.
Jack
Tags: Windows
Similar Questions
-
Shockwave Flash Crash and "running the server failed WMP".
Hello
I have a laptop HP that used Vista. I recently decided to install Windows 7 on it a week ago, but I've had problems since.
I find that as a first step, I would like to watch YouTube and he played very well. However, after a few hours, Youtube should take a break and pop would be a mistake, saying that Shockwave Flash broke down. This error occurred on all browsers (IE, Firefox, Opera, Chrome etc.) and the mistake of Shockwave Flash would be visible on all streaming media sites.
I decided to play music on WWP but she also crashed and said that "Server execution failed". So I decided to restart my computer and everything worked again. My videos played WWP fine and so does Youtube. I decided to continue to watch videos on youtube and listen to music on WWP until both started to freeze and the error occurred again. I would continue to reboot my computer and the same trend happen. Obviously, the error for Shockwave Flash Plugin crash and error running server on WWP are linked so I hope someone can help me solve this problem.
I tried re-installing and do a lot of things that I found here on the forum to see if they can help, but none of the solutions worked. If anyone can help me, I really appreiate it! I'm not a fan of Windows 7 so far, especially with these errors, so I hope to fix it soon!
Thank you so much in advance!
Hi fallenenvym,
1. try to uninstall Adobe flash player and shockwave player from your computer and reinstall on the computer after restarting your computer.
To uninstall the Flash player and shockwave player, you need to follow the link below.
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
Follow the links below to download the Adobe flash player and shockwave player on your computer.
http://kb2.Adobe.com/CPS/142/tn_14224.html
http://kb2.Adobe.com/CPS/191/tn_19166.html
http://kb2.Adobe.com/CPS/141/tn_14157.html
2. for the execution of the server failed error
a. Click Start and in the search bar type cmd.exe
b. right-click on cmd.exe and click Run as administrator
(c) in the command prompt, type the following command
net localgroup "Administrators'"NT Authority\Local Service"/ Add
d. press on enter and restart the computer
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Windows 7 Photo Viewer cannot run, prompting you to "running the server failed.
When I try to open any photo file type that is supported by the Windows Photo Viewer, impossible to open the photo and I ask you with 'failed execution of the server.
Any ideas?
Images of the execution of the server failed - Microsoft Community: http://answers.microsoft.com/en-us/windows/forum/windows_7-desktop/pictures-server-execution-failed/f99874b6-ad67-4798-9e88-3c46b213c874
-
"running the server failed.
"failed execution of the server" I get this message only after letting a clip to run until the end. If I stop the clip before it has reached the end and then I immediately watch another clip. If however I let run all the way, then next time I start a clip I get this error message. But once this error message I press play again and the clip starts without problems. Only happens if I leave a clip at the end. Most boring indeed!
Hello
I see that you get the error "Server execution failed" while playing a clip. I'll help you with this problem.
1. what application you're using to play the clip?
2 are these clips recorded on the computer?
3 is the issue limited to these clips?
4. have you made changes on the computer recently?
Method 1.
Now you must stop the Windows Media Player Network Sharing Service and check the number, to do that you must follow the steps below.
1 Control Panel - Administrative Tools - Services. Find the Windows Media Player Network Sharing Service, open it, click on stop to stop the service.
2. close Windows Media Player 12 if it is started.
3. press the Windows key + R and type %USERPROFILE%\Local Settings\Application Data\Microsoft\Media Flash to search for the folder.
4. move all the files in the folder somewhere else as a backup.
Note: Move the files in the specific folder will reset the database.
5. restart the Windows Media Player to see if we can add library files now.
Method 2.
1. click on start and in the search bar type cmd.exe
2. right click on cmd.exe and click Run as administrator
3. in the command prompt, type the following commandnet localgroup "Administrators'"NT Authority\Local Service"/ Add
4. press on enter and restart the computer
Method 3.
Uninstalling and reinstalling Windows Media Player:
Step 1.
Uninstalling Windows Media Player:
1. go to start and in the search type "Turn Windows willing or not.
2. click on "Turn Windows features on or off".
3. search for multimedia and uncheck the brand in the face of Windows Media Player.
4 restart the computerStep 2.
Reinstall Windows Media Player:
1. go to start and in the search type "Turn Windows willing or not.
2. click on "Turn Windows features on or off".
3. find the multimedia functions and place a check mark in front of the Windows Media Player.
4 restart the computer.Try to read the file now.
I hope this helps.
-
I try to run the security essentials and it tells me that I'm missing msvcp90.dll
I try to run the security essentials, and he tells me that I'm missing msvcp90.dll. Same problem occurring with a real player has not re - install. How can I recover file?
Hi BradleyMitchell,
1. did you of recent changes on the computer?
2 when was the last time it was working fine?
3. what version of Real player installed on the computer?
Msvcp90.dll error can be caused if the Visual C++ Library Runtime components are missing or corrupt on the computer.
Method 1
I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.
The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
http://support.Microsoft.com/kb/310747
Method 2
If the previous step fails, then install the Package redistributable Microsoft Visual C++ 2008 and check if it helps.
Microsoft Visual C++ 2008 Redistributable Package (x 86)
http://www.Microsoft.com/downloads/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=enYou can also post your request in the Microsoft security essentials forums using the link below.
http://answers.Microsoft.com/en-us/protect/Forum/protect_start
-
I tried to download DirectX on my desktop but the download failed and I got error S1023
I tried to download DirectX on my desktop with Win XP. The download failed and I got the S1023 error message. Now what should I do? I need the download.
Original title: download DirectX issue
Delete first upward your Temp File/Cache.
http://winhelp2002.MVPs.org/delcache.htm>
Click Start > all programs > Accessories > System Tools > Disk Cleanup
Better and easier to use - CCleaner.
Download the basic build (Slim) via
http://www.CCleaner.com/download/builds.aspx>
The basic build (Slim) does not contain the toolbar disgusted
Cleaning DO NOT USE ANY Advanced options. TOUCH NOT THE REGISTRY. At least not for now.
Reset
How to determine the version of DirectX using the DirectX Diagnostic tool
http://support.Microsoft.com/kb/157730>
How to download and install DirectX
http://support.Microsoft.com/kb/179113>
UTC/GMT is 00:04, Monday, June 11, 2012
-
My pagefile.sys has completely disappeared. This all started when the power failed and my computer crashed.I get the message that he was away, I went to the performance and settings and tried to change custom settings & re-start.No matter what I do, nothing works. I lost several hours of visiting sites for tips and nothing seems to help.I was told when re-boots WinXP it creates the new file pagefile.sys and I should delete the pagefile.sys file may be corrupted on the C drive.So I put the folders to show hidden files and delete pagefile.sys. I have re-set and tried to recover with no success.There is now absolutely no pagefile.sys on my C drive. Anyone know how I can get back my pagefile.sys?I want to get my virtual memory works again?Thank you very much in advance!
I'd start first with the chkdsk/r.
Don't forget - if you have a factory installed recovery Partition, fixmbr will scan it as the Master Boot Record that written XP will equal not the MBR installed by the factory, so first run chkdsk /r (did I say that already)?
Here are some instructions:
http://pcsupport.about.com/od/fixtheproblem/SS/RCONSOLE.htm
Where people have no XP bootable media, here are my instructions:
If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.
This is not the same as recovery disks that might have come with the acquisition of the system store.
You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.
The ISO bootable image file you need to download is called:
xp_rec_con. ISO
Download the ISO from here:
http://www.mediafire.com/?ueyyzfymmig
Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:
When you install ImgBurn, DO NOT install the Ask toolbar.
Here are some instructions for ImgBurn:
http://Forum.ImgBurn.com/index.php?showtopic=61
It would be a good idea to test your bootable CD on a computer running.
You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive. These adjustments are made before Windows tries to load. If you miss it, you will need to restart the system again.
When you start on the CD, follow the instructions:
Press any key to boot from CD...
Installing Windows... going to pronounce.
Press 'R' to enter the Recovery Console.
Select the installation that you want to access (usually 1: C:\WINDOWS)
You may be asked to enter the password (usually empty).
You should be in the folder C:\WINDOWS. It's the same as the
C:\Windows folder that you see in Solution Explorer.
The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.
For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:
A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.
In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.
Running chkdsk is fine, even if he finds no problem. It won't hurt anything to run it.
Assuming your boot drive is C, run the following command:
CHKDSK C: /r
Let chkdsk finish to correct the problems, he could find.
It may take a long time for chkdsk complete or they seem to be "stuck". Be patient. If the HARD drive led blinks always, chkdsk is something. Keep an eye on the amount of the percentage to be sure that it is still making progress. It may even seem to go back sometime.
You must run chkdsk/r again until it finds no error to correct.
Remove the CD, and then type "exit" to exit the RC and restart the computer.
You have not to set the BIOS to boot the disk HARD since the CD won't be.
-
Original title: Family Tree Maker does not connect on the Web dashboard.
My Family Tree Maker 2009 does not connect to the Internet comes up with the message which is cannot authenticate the server, but it tells me that my version is up-to-date. He has always worked so far? Comes with the following message if I try to do anything that involves the net.
"Auntentication with the server failed.
Hi HelenTL,
You did changes to the computer before this problem?
If you have any software security & firewall installed, disable them temporarily and check if the problem persists.
Note: check to allow them back on the computer after you complete these steps.Hope the helps of information.
Please post back and we do know. -
Hello
I have an internal modem on my pc that is running windows server 2008, and I want to make a connection. Not a connection to an ISP, but to a mac. I want to transfer data via phone ports, have two computers without being connected to the outside world.
Thank you
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
Where the local users and groups in Win 7 Home Premium? I don't find it in computer management.
Elevate your privileges permanently would defy the purpose of UAC and is therefore not available. There are two ways to start a command prompt:
1. click on the start planet.2. type the three letters cmd in the search box.3. press on Ctrl + Shift + Enter4. click on "run as Administrator".or:1. create a shortcut on the desktop for cmd.exe.2. right click.3. click on run as administrator
-
ORA-28547: connection to the server failed, probable Oracle Net admin error.
Dear all,
My11gR2 database on windows 2008 R2 Standard is in error "ORA-28547: connection to the server failed, probable Oracle Net admin error.
It's when I try to log on to the server itself
as:
SQL * more: Production of release 11.2.0.1.0 kills him Oct 8 05:43:03 2013
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter the user name: sys/***@orcl as sysdba
"ORA-28547: failed to connect to the server, likely admin error Oracle Net.
This started happening when the server has been restarted. I don't know if I have to stop any service, as in some cases under Linux should be stopped service iptables.
The solution I found on most of the forums is to change in sqlnet.ora since '#SQLNET. AUTHENTICATION_SERVICES = (NTS) 'to' #SQLNET. AUTHENTICATION_SERVICES = (NONE)"and restart the receiver.
But even if it doesn't in my case.
Kindly help.
Best regards, Imran
Guys, there are 2 databases installed on the same server, to correctly configure the SID. Once set, I could see that the database is down and when starting it started working well.
Thanks for your efforts.
-
TypeError: try to run the script compilation and go on a contour
Above the error message appears when moving between images - back and forth. By clicking on the OK button removes the error message and there is no apparent problem. The window that appears refers to a JAVA Script Application (I guess that FIREFOX is the application?)
Check and tell if its working.
-
How can I locate the server info and start it I can send documents
I can't send or send my 'file documents' file incorrect server. How can I locate the server info and start it I can send documents
I have a problem, find out who is my server and then set this info in my PC so that I can send or send my files that are in my Document folders
http://www.SimpleHelp.NET/2007/02/07/a-beginners-guide-to-setting-up-Windows-Mail/
Link above has an easy to follow Guide to set up Windows Mail.
Contact your ISP (Internet Service Provider).
They offer your broad band/Dial-up connection.
Ask them to:
username
password for your service account to wide band/Dial-Up with themServer of incoming POP3 mail
outgoing mail SMTP serverThe above information is required to set up Windows Mail.
ISPS are usually happy to help you set up your email account.
See you soon.
Mick Murphy - Microsoft partner
-
Lets run the multilingual method and input of blackBerry Smartphones
I've updated the 7.1 os and it took me to multilingual method and input. I had once managed a whole upward. in any case, it seemed now missing on the phone, and on the desktop PC does not show language. I did remove the OSI and reinstall, the the same problem. I want that it multilingual and other language input method. Any suggestion? Please take note.
OK... that now makes sense... the automatic method detects your BB and the level of operating system installed, but is not able to download correctly what it needs from the Internet to continue. And the Red Star means that there is an update, he wants to offer you, but again he has trouble to download what suits him.
So, what you need to do is to defeat the automatic method and force instead of things. The easiest way is, on a PC (you can not do on MAC):
1) uninstall all the BB OS packages from your PC,
(2) make sure you have the BB Desktop Software already installed
(3) download and install to your PC, the BB OS package you want:
- http://us.BlackBerry.com/support/downloads/download_sites.jsp
- If you want to just reload your current version, you can access your carriers download portal and get the same exact package you are already running
- KB23393 How to check the model number and the version of the BlackBerry device software on a BlackBerry smartphone
- But if you want to go for an update, you can see what your company has, or you can dig into all of the companies that support your specific model BB number and compare versions of each provision.
- Also consider this information as you choose your BB OS package:
- KB05305 Location of support for BlackBerry smartphones
4) remove, on your PC, all copies of the SELLER. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:
- C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
- C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML
(5) run the Desktop software and connect your BB
If you chose to update your BB OS, then the software should immediately offer the bundle of BONES that you have installed on your PC, before you can do anything else. If, during the process, your BB votre BB a '507' error, simply unplug the power cord of the BB USB and reinsert it. do nothing else... This should allow the installation to continue.
If you have chosen your BB exact same OS package that is already running on your BB, then you should be able to proceed with the installation language you want (assuming, based on the location of KB, you have installed the right BB OS package that includes the language of your choice).
Do not forget to save.
Good luck and let us know!
-
can not display the webpage error something about the Server internal and 500 are down for maintenance? Yahoo search option and can get to Web site but trying to post comments online and get this message. tried to restart and got the same answer. Just set Windows to update when I logged on tonight.
Hi ginnypierson,
Thanks for posting in the Microsoft community.
I understand that you are facing the issue with can not display the webpage and you are wrong about 500 and internal server being down for maintenance.
Before you start the troubleshooting steps, I need the information required
1. what web browser do you use?
2. have you made any changes to the computer?
3. this problem occurs only with the particular website?
Method 1:
If you use Internet explorer, I suggest you to see link and check.
Get help with the Web site (HTTP error) error messages.
http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-website-error-messages-HTTP-errors
Method 2:
I suggest you to see link and check.
How to optimize Internet Explorer
http://support.Microsoft.com/kb/936213/ro
WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings
Please follow these recommended steps, review the additional information provided and after back if you still experience the issue. I will be happy to provide you with additional options available that you can use to get this resolved.
Maybe you are looking for
-
Could not restore the data on the iPad
Welcome! I restarted my data and the news of the iPad in Factory mode and after that I wanted to restore the data from backup to iCloud. My problem is very simple. After the nice tutorial and connection with apple ID, I have to choose 'restore data f
-
I've recently updated Firefox to the latest version 10.0.2. After that I could not enter any website address and press the Enter key and get on the site, neither could I select a Web site in the drop-down list of sites visited previously. The only wa
-
I just spent 2 hours trying to get rid of Babylkon including the sending of Spybot search and destroy him. I removed from IE, but he took control of Firefox. Help, please.
-
I had this about 2 weeks ago, but don't remember how I got it, it came with the download of 7.0 I think.
-
Satellite Pro P100: I think that my graphics card is defective
I have a satellite Pro P100 with a GeForce Go 7600 and think that graphic design is faulty. I was playing a game that has good graphics and I was testing the FPS cause it was laggy. On average, that a decent graphics card must be able to give an SPF