Integration with JIRA API

Similar Questions

• integration with Plone CMS

  Hello

  Is there a roadmap to allow integration with Plone CMS

  Plone CMS: Open Source content management

  We have no plans to provide a connector to Plone. We offer API to allow customers to create connectors to various CMS systems and other services.

  You can get more information here: third with AEM Mobile systems integration

• Management of an APEX with walk-APIs - it APEX runtime environment?

  People,
  
  APEX Version: 4.2.1
  Database EE 11 GR 2
  Listener: EPG
  
  TLDR: Go at the end of the question for this thread in bold.
  
  I work in an environment where we have maintained by Oracle Forms applications and Oracle APEX on a database only internal production data. We want to take a redacted together these data (PII or personal Identifiable Information removal) and some applications of the APEX and put them on a separate external server for public consumption. The internal production environment is running APEX with the runtime and development environments. The external server runs APEX with just the execution with the query, only the applications environment. While two of the external applications are public applications without authentication (both work very well), there is an application that will have a relatively small number of users who authenticate with the application to access more detailed information than the general public. Still no PII or something like that, a little more information. Users are users of workspace APEX. The three applications are in the same workspace.
  
  I have to assume that I'm not the only person with the above configuration, but I had a moment difficult to work right. Although the documentation does not have the API, it is not always clear which API you would use and why.
  
  For example, in the internal production environment when a user connects to the authenticated application, they get access to the application (if they are in the right group) or they get an error page indicating that they have no access to the application. In the external runtime application that they will always have a ' ORA-06550: line 4, column 55: PLS-00201: identifier ' WWV_FLOW_F4000_PLUGINS.» ' INTERNAL_4155_SESSION_SENTRY' must be declared ORA-06550: line 4, column 1: PL/SQL: statement ignored ' error, which "sort of" makes sense because the application referenced (4155) is part of the installation of development and is not included as part of the runtime install only (either by the way, this seems like a bit of an oversight on the part of the APEX team). It is pretty obvious that the export and import of the workspace (and its users) 'something' got zero and some type of password reset is requested. Of course, end-user password reset request is not included in a single installation of runtime...
  
  So, off to the API to see if I can "reset" on the single runtime installation external users so that they do not have to reset their passwords when first connecting. Wow... Lots and lots of API. Understand that you must set the security with the APEX_UTIL group id. SET_SECURITY_GROUP_ID API takes some time. After much wandering around, I settled on the apex_util API and the WWV_FLOW_USERS view as a good place to study...
  
  However, when we query the view WWV_FLOW_USERS on each side, all of the columns "expected" that one would expect because of this behavior are identical between the installation of development / internal enforcement and the only external runtime installation. Things like CHANGE_PASSWORD_ON_FIRST_USE and FIRST_PASSWORD_USE_OCCURRED are identical (and btw, not the values that you expect them to be... FIRST_PASSWORD_USE_OCCURRED is N for all users except the user ADMIN). The only values that differ between the two environments are as CREATED_BY, CREATION_DATE, LAST_UPDATED_DATE, and LAST_UPDATED_BY columns.
  
  Things that work just great:
  
  < li > the installation itself! Very easy to move backward between each environment (runtime only or runtime and development).
  < Li > integration with SQL/Developer is fantastic. It is very cool to be able to right-click on an application in the internal environment and deploy it to the unique runtime environment. Ideally, it would be nice to be able to move workspaces APEX in the same way.
  
  Things that do not seem to be large:
  
  < Li > when that documentation tells you what each API, it doesn't tell you why you want to use it, or what you would use it for. Having a section "useful use case" in the documentation would be great. Yes, there is the example of code (which of course does not mention that you need to set the id of Group of security for most of them to work), but the code example is not really tell you why and what each of the attributes you can set with her (for the API set for example) will actually... For example the documentation does not really that many fields are not yet used, and even if the values are the exact opposite of what you would think they would be.
  
  So, my immediate question:
  
  What API will allow me to have users exported with a workspace to use applications that are authenticated in a single installation of runtime?
  
  And my follow-up question (s):
  
  You can actually use the API defined to manage a runtime environment and is at - it a good resource that explains the how and why rather than just the choice of the API.

  Well, after a lot of trying things, I finally had things to work.

  It seems that export and import a workspace "expires" users to your workspace. Despite the fact that, in the development environment / the ACCOUNT_EXPIRY (which is a date) has a whole bunch of different values and seems to work perfectly, when you import a workspace that the ACCOUNT_EXPIRY column is ready on the date you did import previous internal enforcement. For some reason, this is an indication that your account has expired at the time when you look at the WWV_FLOW_USERS table. Not one of the columns expected, but on the contrary this date column...

  So let's take a look at the [url http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35127/apex_util.htm#autoId126]Unexpire account of the workspace of the documentation procedure:]

  UNEXPIRE_WORKSPACE_ACCOUNT Procedure
  
  Unexpires developer and workspace administrator accounts and the associated passwords, enabling the developer or administrator to log in to a workspace.
  
  Syntax
  
  APEX_UTIL.UNEXPIRE_WORKSPACE_ACCOUNT (
      p_user_name IN VARCHAR2);
  
  Parameters
  
  Table 21-107 describes the parameters available in the UNEXPIRE_WORKSPACE_ACCOUNT procedure.
  
  Table 21-107 UNEXPIRE_WORKSPACE_ACCOUNT Parameters
  Parameter           Description
  
  p_user_name  The user name of the user account
  
  Example
  
  The following example shows how to use the UNEXPIRE_WORKSPACE_ACCOUNT procedure. Use this procedure to renew (unexpire) an Application Express workspace administrator account in the current workspace. This action specifically renews the account for use by developers or administrators to login to a workspace and may also renew the account for its use by end users to authenticate to developed applications.
  
  This procedure must be run by a user having administration privileges in the current workspace.
  
  BEGIN
      FOR c1 IN (select user_name from wwv_flow_users) loop
          APEX_UTIL.UNEXPIRE_WORKSPACE_ACCOUNT(p_user_name => c1.user_name);
          htp.p('Workspace Account:'||c1.user_name||' is now valid.');
      END LOOP;
  END;   
  
  See Also:
  "EXPIRE_WORKSPACE_ACCOUNT Procedure" and "WORKSPACE_ACCOUNT_DAYS_LEFT Function"
  

  It's very nice and all, but there are some things missing in the example above:

  (1) you must call the procedure of apex_util.set_security_group_id with the ID of the workspace you want to unexpire accounts.
  (2) you will need to issue a COMMIT for steps to engage the unexpire.

  Question: How are you supposed to know you need to do the above two steps?

  Take a look at what the API documentation has for the description of the SET_SECURITY_GROUP_ID procedure:

  SET_SECURITY_GROUP_ID Procedure
  Use this procedure with apex_util.find_security_group_id to ease the use of the mail package in batch mode. This procedure is especially useful when a schema is associated with more than one workspace. For example, you might want to create a procedure that is run by a nightly job to email all outstanding tasks.
  

  Note that there is no mention that you will need to call the SET_SECURITY_GROUP_ID procedure for almost all other API calls in the APEX_UTIL package (or at least many of them)...

• 5.6.3 (EBS) editor XML can be integrated with APEX?

  On the following document, Publisher 5.6.2 XMP supports no integration with APEX. Can I know 5.6.3? What is the product being an add-on with EBS causing the supporting integration (i.e., 5.6.3 even is not taken in charge)?
  
  http://www.Oracle.com/technology/products/database/application_express/HTML/configure_printing.html
  
  Thank you
  Rownald

  APEX integrates with the standalone version of BI Publisher. It was not a component of server with the standalone 5.6.3. The integration is based on the editor providing a servlet for APEX contact, 5.6.3 do not have that.
  If you're talking 5.6.3 under EBS then I guess you could build a servlet on the mid-tier that calls the API conversion of BEEP - it would all be a custom job.

  The integration of the APEX needs 10.1.3.2 BEEP to work with out of the box.

  Concerning

  Tim

• Integration with non-Oracle EBS products

  I'm new to EBS (I try to install EBS for myself and also - I'm going through the documentation), and I'm trying to figure out is - it possible to Exchange data between modules of the EBS and non-Oracle applications. I found nice about Oracle API links, Biz adapters and so on and I'm going to study them, but when I'm looking on some specifice modules, then their sheets contatin very limited integration with non-Oracle, actually - I assume that they are carefully selected partners. Then - I wounder, I feel of the documentation that the EBS is fairly open and we can build anything on them or in their breast, but - now I have doubts about this.
  
  Well - from my experience as a developer Oracle-no, I know that data exchange is a fairly common task and it can be a big pluss for system, if its data and services are, for example exposed as web services for inclusion in the larger process and so on. EBS aims in different ways (for example to restrict the user from the bowels of EBS EBS-sphere modules)? Right now I'm doing some specifications and requirements for a research project and I'm confused if I include my software with EBS integration or not, perhaps such integration is impossible?
  
  Published by: user454720 on 2008.17.12 14:58

  Hello

  Open interfaces were for the main entities for a long time, for example for financial services - AP invoices, bank statements, receipts (Lockbox) etc.
  With release 12, there are several APIs / open Interfaces with the general move towards Web Services (although not yet here!)
  You can find "end points", etc. of the API/Open Interfaces to http://irep.oracle.com
  All them above are supported with your standard EBS Support license.

  When you hit something where it is not an open Interface or API, then you move into solutions not supported. All database entities are visible (IE. Open) and the majority of the code is open or extensible. Of course if write you / change any support then moves to your responsibility. Use as much as possible private API (for example the API of PL/SQL using forms).

  So, in addition to the customization and expansion using the standard tools of the EBS UI/backend (OFA, forms, reports, PL/SQL, discoverer, Workflow, etc.), I know of people who have a front-end for data EBS using Oracle APEX (HTMLDB), PHP, c# .net, etc. of the ADF.

  In short, you can do whatever you like exchanging data, but there are moments where you go not supported...

  Kind regards
  Gareth

• Integration with 50G

  Hello!

  Well, when I tried to compute the definite integral of | Sin x | I received the message cannot find the signin [0, 2 ft].

  

  I went in RPN mode, and this error persists. I then used [RS] [ENTER] to get the numeric result, and after awhile, I got the correct answer 4. But I can't get the answer simplely by clicking [EVAL].

  I also tried to calculate the antiderivative, and the correct answer returned Calculator -cos (x) * sign (sin (x)). I was wondering why the calculator produces an error when they apply for an accurate result (not digital, without .).

  Jack

  confirming the latest set of equations:

  

  EVAL would be = - 1

  and -> limit X PI - 0 = 1

  and the limit X-> PI = cannot determine.

  So, there's a singularity...

  Unfortunately, because of the resolution of the screen of 50 G, when the resulting equation for the indefinite integral is drawn, clear breaks in the plot IP and 2 * PI are not 100% clear.

  However, the subsequent calculations confirm that they exist.

  This is what has been shown that when the original integral from 0 to 2PI of | Sin (x) | is calculated,

  It is clear that the 50G automatically sets ON RIGOUREUX, even if it is not enabled in the (likely due to the function absolute value in the equation) indicators.

  THE rigorous is perfectly reasonably expect when the EXACT mode is selected with a function of absolute value.

  now for a pencil and paper method:

  | Sin (x) | is sin(x) from 0 to PI

  | Sin (x) | is - sin (x) IP to 2PI

  so...

  integral from 0 to 2PI of | Sin (x) | can also be expressed in

  integral from 0 to PI of Sin (x)

  +

  integral of the AP to 2PI of-sin (x)

  

  in EXACT MODE (strict mode setting is more questions)

  When EVAL would be = 4.

  I can refer you to a message done previously by Bernard Parisse (one of the developers of CASE).   Bernard said that the CASE cannot intercept all EXACT integration singularities (but it report some).

  Regarding the digital approximation method (help-> NUM) to get the result... I can't offer no answer as to the reason that the singularity is resolved.

  I've never seen a single post indicating what type of digital approximation algorithms are used for approximate integration with the 50G.  Of course, the digital approximation algorithms are distinguished by exact calculations.

  Finally, FYI, here is another good example of the use of 50G with an integral and having to use a bit of paper and pencil methodology (in this case, the method of cauchy principal value) to solve the 50G of the singularity.

  /T5/calculators/50g-numerical-integration-with-singularities/m-p/5678169#M11440

• Is there a work around to show the Site identity button when the integration with facebook like/send etc. It disappears when it comes to the page, it's because of the iframe can be done if anything.

  Is there a work around to show the Site identity button when the integration with facebook like/send etc. It disappears when it comes to the page, it's because of the iframe

  What can be done if anything.

  Pages that use "mixed content" (parts of the use of the HTTP page and some use HTTPS) are not secure against tampering, they will not display the site identity button. To resolve this problem, make sure that external resources you are incorporation are available over HTTPS and you use HTTPS to nest them.

  For example, to iframe widgets like the Facebook 'Like' buttons, make sure that your iframe use src = "https://192.168.1.20 /...". »

  See also discussion here: http://stackoverflow.com/questions/3587021/facebook-like-button-breaks-https-ssl

• Open different files to workspace with VeriStand API

  Hello, I have a question about the API VeriStand using LabVIEW. LabView is able to open a specific project of VS; now, I mean VS to open the same project file with a file from another workspace (.nivsscreen) similar like the box below, but with the API:

  

  I want to do this is because I want to open different files, workspace according to the connected equipment.

  Is there an API function to do this?

  Thank you, Michael

  There is not an API to directly modify the screen workspace or ask running workspace to load a particular screen.

  I think going that you can accomplish what you want, leaving to know the definition of deployed system but by program by selecting different workspaces to display via the API. It is a small roundabout and there are a few quirks of cosmetics that I mention below, but it's probably worth a look. I am attaching an example below, you can play.

  The main idea is to create a system definition file, and then create several separate project VeriStand files which all related to the same system definition. You can do this in the dialog box create a new project by selecting the tab system definition to use a definition from existing system rather than create a new one. For each project you create, modify the file to corresponding workspace screens for some display you like.

  Once you have done this, use execution > Workspace screws to deploy by programming the system definition file. It is important that do you rather than deploy the system through the project definition file, as I'll explain below. Then, you can take advantage of the project API screw for programmically load and close projects, as well as launch and close the workspace for this project. To view a particular workspace, just close the current project (if it is open) and load the project associated with this workspace. Then ask this project to open his window to the workspace.

  The key thing to note here is that if a project load and it detects that VeriStand bridge is already linked to its definition of linked system, it will just adopt that opens the connection. In addition, if the project is closed, it will NOT cancel the deployment of this system gateway definition connection, because it doesn't have to deploy it in the first place.

  See the example below. Just unzip all the files in the same folder and open the Automator.vi workspace. Make sure VeriStand is open before you run this VI.

  Known issues: when you switch workspaces in this example, you are in fact a project of closing and opening another. Therefore, the window began to do can do appear briefly.

• Definition of the parameters of the VI in LabView Action Module with TestStand API

  I started playing with the API, TestStand, and I have questions on how to configure a TSAdp.LabViewModule.

  I use a few examples of NOR and the community of developers to get started:
  http://www.NI.com/example/30263/en/
  https://decibel.NI.com/content/docs/doc-18401

  These examples work as I expect and I understand them.  I am struggling with how to specify VI parameter values in the module when the step type is 'Action '.  In other words, how to set these parameters?

  

  All the examples I see use of step types that have defined fields, which are accessible through the API with 'AsPropertyObject '.  The action type, by default, has the result field.

  Set the values of the parameters of a VI with the API TestSTand?  If so, how?

  Thank you

  Jacob

  Well, I thought about it on my own so I figure I'd share the solution:

  

• CRM integrated with MS Project Management

  Hi Expert,

  On the CRM integrated with MS Project Management, there any company always do this?

  In fact, there are only certain configurations or it's really complicated customization?

  The result of the integration is really effective and efficient?

  Can share with me the practice of MS Project to the planning of resources management?

  Thank you!

  Hello

  The question you posted would be bettersuited in the TechNet Forums. I would recommend posting your query in the TechNetForums for more assistance:

  http://social.technet.Microsoft.com/forums/da-DK/projectserver2010general/threads

• While freeing up disk space, I accidentally deleted MSOffice, which is integrated with my HP 1000

  While freeing up disk space, I accidentally deleted MS Office which is integrated with my laptop HP 1000. How to restore my MS Office 2010 Starter? HP predict that if the product is still in warranty period?

  I tried restoring the setting factory but without any real help. Please help me!

  Kind regards

  Ron

  Once Office Starter is removed there is no way to reinstall. Even make a system back to factory settings recovery will not reinstall it.

• Content Plazmic could communicate with RIM API?

  I had this problem for a long time and not been resolved.  Hope I can get the result here.

  When you use Plazmic composer, we can create image with some actions or events. But will this .pme file to communicate with RIM API?

  for example, I want to show weather picture of today. This image should include the weather icon and the degree.

  Suppose we use a composer to create this image. Because the degree is dynamic and changing. Is that possible for content plazmic degree as a parameter entry and automatically generate the images.

  It's like the RIM API, we create a screen, add this mediaPlayer with .pme file in this form. Then we have a logic to get data weather degree and put in mediaPlayer and leave it to view the .pme file, which will be the image of time with the icon and the degree.

  Content Plazmic is static in Java applications.  He can't interact with the application (fire events) or y at - it APIs to modify the content.

  If you are looking for to use on a web site and to create dynamic content for the BlackBerry browser, it is possible.  You can export your Plazmic composer in SVG content.  It is an XML file that you can then use as the basis for a dynamic page.

  Version 4.6.0 of the BlackBerry API set also has support for SVG display.  So you could create the dynamic content using these methods, however please note that this requires BlackBerry handheld software version 4.6.0 or higher.

• SX 20 integration with VCS

  Hello

  Is it possible to integrate 20 SX with VCS.

  Because our customer want to integrate with their MS Lync TP, so found that VCS can do this job. Then please suggest...

  Here also to point out that we are planing to use the public IP address for SX 20 to receive incoming calls from the public IP address, as it will be integrated with ISDN gateway.

  Details of the product for this solution:

  VCS

  SX 20

  TP ISDN Gateway

  Thanks in advance...

  Kind regards

  Daniele

  Yes, its possible, check this.

• Replacement of 6000 MXP Integrator with unique display. C40 SX20 vs?

  I have to make a quick decision and my CISCO sales representative is MIA :(

  We have a bunch of 6000 s MXP (package ingegrator), I would like to replace. They are simple installations with a single monitor on a roll integer grid.

  with output to the screen and a camera is there any point to spend the extra money for a C40 vs getting a SX20? From a point of view video capability they look pretty well. C40 more things gets me in the back, but it is a pretty simple setup.

  Just looking for what people here could do?

  Thank you!

  Although C40 and SX20 are two different solutions for videoconferencing from Cisco, an integrator (c40) and other is fast setting solution (SX20).

  The SX20 Quick Set is designed to provide multi-party and Conference video to high definition with the flexibility to adapt to various configurations - all at a value price and size of the room.

  C40 is for Integrator supports for integration with 3 party like crestron devices, mixers.

  two take in charge the premium 1080 p solution.

  both are excellent solutions and are mind blowing in the feature and the feature as compare to the MXP series.

  You can't go wrong with either.

• Integration with the PIX IDS firewall

  I read the Release Notes for Cisco Intrusion Detection System Sensor Version 3.0 S4 (1), and tripped on the new features of this version it pretends the integration with the PIX firewall

  How do implement you this? What kind of integration offer?

  Instructions for the sensor and the basic configuration of PIX can be found here:

  http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/csids/csids8/13870_01.htm#xtocid23

  Instructions for sensor and PIX SSH configuration can be found here:

  http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/csids/csids8/13870_01.htm#xtocid16

  You can configure the sensor to connect to the PIX via telnet when

  using the PIX inside interface, otherwise you have to use SSH.

  SSH with 3des encryption is supported in version 3.0 or later

  sensors for connections of PIX.

  Warning: If you use telnet with a version 6.2.1 or PIX more late or if

  you want to use SSH with encryption on any PIX, so you

  need a patch for your sensor. If so, open a case of TAC and demand

  the latest version of nr.managed engineering. Reference

  [email protected] / * / for any question.