CRM integrated with MS Project Management

Similar Questions

• vCOPS integration with vCenter Configuration Manager

  Hello

  I have a problem with the integration with vCenter Configuration Manager vCOPS.

  When I try to save vCCM in vCOPS prividing on 100% correct settings, I get an error:

  Cannot save vCenter Configuration Manager system: Details: unable to connect to the instance of VCM target.

  In fact I don't know yet where to look for more information about the error.

  Kind regards

  Sebastian

  I posted some information on this point - is useful.

  StorageGumbo: VCM server registration for Ops VAPP 5.6 vC

• Leads360 CRM Integration with Eloqua

  Our company is new to Eloqua and I just finished SmartStart. We have worked with 4Thought Marketing for the creation and implementation of our custom integration of Leads360 to Eloqua. Are there other Leads360 users out there? I'm curious to know what hiccups may be in the future. In addition, I'd like an overview of how you've optimized campaigns and emails with Eloqua after moving from Leads360 and integrating Strongmail.

  I wanted to follow my last post. We used 4Thought Marketing for the creation of our bridge between Velocify (formerly Leads360) and Eloqua and have been very happy. 4 thinking is very pleasant to work with. If you can work with Diego Chacon you will be very happy, the rest of the team is too big.

• Integration of TMS with Evoko Room Manager

  Hi Experts,

  Could if it you please let me know if activated VC rooms which exists in the TMS can be integrated with Evoko Room Manager.

  If so, how and what are the requirements?

  If I do not set up the TMSXE with TMS, will walk or not?

  All other views?

  Thank you

  Saurabh

  Hi Slim

  I read the Evoko Room Manager administrator guide so basically it's the knowledge that I have on the Evoko system. I have not tested with TMS, but it seems that it just connects to the server in sort of the same way the TMSXE. It monitors the booked rooms and display it on the screen that is mounted in the room.

  In my opinion, I think that this will not work with TMS what it itself, but it is possible that it will not work if you have installed TMSXE. Since when the room is reserved by a customer the Evoko outlook will see that this room is reserved for this time and display it on the screen. At the same time the TMSXE will also see that this room is reserved and create a conference for the video endpoint in this room as well. However given that I have not tested I do not know the limitations on that. I see that you can set how many chairs is available for this Evoko room and if you assume that the limitiation of participants for a meeting with this room included you may not be able to book the biggest number of participants at the video conference as you want.

  So I think that this requires some tests in order to be sure. I can't find any documents indicating that it works as expected.

  / Magnus

• Project Manager hangs during fired fresh files and copy them to the new location

  Hello

  Any project I have which includes a .mts file captured with a Panasonic GH1 camera causes the project manager in Premiere Pro (CC 2015 edition) to hang (several minutes and ends by hangs) when I do a "collect files and copy them to a new location. It creates a "xxxx. MTSBDMV' with a 'STREAM' record fo RL first file, but that is it. I can even reproduce with a new project with a single sequence, single clip.

  I'm under Premiere Pro CC 2015 edition on a Windows 10 machine. (I tried before 2014 CC edition WIndows 7 as well, same result, but I have not created a test case).

  An example of project (1,3 Mo) can be found at: Test_GH1_footage_collect_files_crash.zip - Google Drive

  Any suggestion for a solution or workaround are much appreciated.

  Thanks in advance,

  Arjan Mels

  Hi Albion,

  Thanks for your message and anxiety. I downloaded your sample project and media and was able to replicate your issue.

  Any project I have which includes a .mts file captured with a Panasonic GH1 camera causes the project manager in Premiere Pro (CC 2015 edition) to hang (several minutes and ends by hangs) when I do a "collect files and copy them to a new location. It creates a "xxxx. MTSBDMV' with a 'STREAM' record fo RL first file, but that is it. I can even reproduce with a new project with a single sequence, single clip.

  I don't know why these images give you so much trouble, but there are a few things to check.

  1. Where is the folder for multimedia file structure? All I see is the raw. Clip of MTS.
  2. In general, you copy all the SD card to your computer HD, then ingest via the media browser
     1. This allows all the metadata to clips to be implemented with the clip.
     2. The clip needs this metadata so that it works normally.
     3. Many publishers of band on the metadata by choosing File > import and do not ingest correctly via the media browser

  I suspect that this could be at the heart of your problems. You could try a try and ingest the images correctly, so try and move the project with the project manager. If it still does not work, please file a bug herereport.

  Once I transcoded your footage to ProRes LT using Adobe prelude, I could ingest images, create a sequence, then moved the sequence and associated media without problem.

  Thank you

  Kevin

• Cisco Security Manager integration with Cisco ACS troubleshooting

  Hi all!

  I have a problem with the integration between Cisco Security Manager and ACS. I've done the integration, but the identity of the user system doesn't have enough privileges. I know what the problem is, but I don't know how I can change the login of the ACS to the local MSC?

  I found a file that specifies the following:

  Q.

  Is there a backend script or command line interface options to change the ACS to local CicsoWorks connection module?

  A.

  To restore the server LMS ACS local user mode mode, stop the CiscoWorks

  demons and run the following script:

  NMSROOT/bin/perl ResetLoginModule.pl

  (for Solaris)

  NMSROOT\bin\perl ResetLoginModule.pl

  (for Windows)

  Then, restart the daemon.

  I did it, but does not work, any idea?

  Hello

  I guess you can try to go through the question on WSC and GBA integration troubleshooting:

  http://www.Cisco.com/en/us/docs/security/security_management/cisco_security_manager/security_manager/3.0/troubleshooting/guide/rbacts.html#wp1043629

  Few things might have gone wrong:

  1 - this command must be run on the server MCS cmd prompt (make sure that you are not on the client computer)

  2 - NMSROOT is the directory were MSC Server is installed. Is usually c:\Progra~1\CSCOpx

  3. you must stop the deamon Manager before performing this action (and restart)

  For example if the directory is the one above to reset the connection locally, you can try the following:

  net stop crmdmgtd---> that stops the daemon Manager (can be done by the services window)

  c:\Progra~1\CSCOpx\bin\perl c:\Progra~1\CSCOpx\bin\ ResetLoginModule.pl---> restores local authentication

  net start crmdmgtd---> restart the Daemon Manager

  Can you maybe try again and let me know how it goes?

  Thank you

• How do you manage contacts vs leads into your CRM integration?

  Our CRM integration rule checks to see if a contact Eloqua has a SFDC LeadID before create a lead or update. However, my SFDC case has many cases where we have created a contact or have converted an advance to contact. In these cases, contact Eloqua will necessarily a SFDC LeadID, even if the email address is on a contact in SFDC. How many people deal with this? You simply create a lead during your CRM synchronization and then merge these dupes on the side of the SFDC? Did you sort your integration rule checks to see if a contact is and update the contact instead?

  Our CRM integration runs a control both LeadID and ContactID. "Eloqua contact synchronization and the first rule of decision is a SFDC ContactID", if so, he is sent to update contact stage. If this isn't the second rule of decision is 'A LeadID SFDC?', is it only updates the head, is it not not creates a new track.

• Operations Manager integration with vSphere Web Client

  Hello

  One of the new features that I keep seeing credited for vCenter Operations Manager v5.6 is 'integration with vSphere Web Client'.

  I went through the process of getting vCOps operational v5.6 (and everything works fine), but I don't see any integration with the Web Client.  Am I missing something obvious?  Where is the integration?  I have to do something to activate it?

  See you soon,.

  David

  Take a look at the video on Eric Sloof vCOPS 5.6 integration with VMware vSphere Client Web blog post where he explains how to use the vCenter integration of Operations Manager with the Web Client vSphere.

• Project Manager do not copy a project correctly with multiple files of span

  "Houston, we have a problem."  OK, I think it's a serious bug in the Project Manager / Mountain Lion copy function.

  This is my first complete Assembly with PP, and unfortunately I did not advance file management.  This is so what I put up to do all my editing (which worked great).

  3 camera files - all AVCHD (PRIVATE) on my external drive 1.

  Created a project in PP file and saved to my local dive.

  Imported files, 6 camera with Media Browser [(milieu, gauche et droite) - acts 1 and 2].

  Import named these files vidoe XXXXX. MTS, so I renamed the Act1, 2 Center, Act1 right and so forth.

  Created a chronology of MASTER and then synchronize the video and then created a scene of the MASTER schedule.  Again, EVERYTHING GOES WELL.

  Now that the project is done, I want to use the function of project manager COPY 'Archive' my project so I chose to save to an EXTERNAL DRIVE 2.

  Here is the BUG.  If I open the project file on external Drive 2, not all my clips are emerging.  In fact, if I select one of the VIDEO CLIPS, such as CENTRE ACT 1 and make a find in the FINDER it shows:

  

  

  where, as in the original project on my local drive CENTRE ACT 1 appears as: (note that there are several split files as it should)

  

  

  Note that in the COPIED file element he copied an AVCHD only (and I don't know what does it file is appropriately for 6 of them).

  Thoughts?

  Anyone know where this should be reported as a bug?

• With the help of project manager

  I use Robohelp 10 on Win 7 OS

  After renaming some files and folders in the project manager, I closed RoboHelp and when I tried to open the project again, it has been altered. Received the message "Robohelp stopped working" and couldn't open the project.

  I wonder if I broke some rules for the use of project manager. Here's what I did:

  1. right click on a folder and choose 'Rename' to rename the folder. Did that for a few records.
  2. right click on a topic and choose 'properties '. The tab 'general', renamed 'title of topic' and 'file name' (thought I used the correct HR file naming conventions to do so). Been to a few topics. Also the text index and keyword.
  3. Drag and drop a few themes in different folders.
  4. Dragged a subjects from top to bottom in a folder to change the order of the list
  5. After you move everything out folder, right click on an empty folder and choose 'delete '. done this for a few records

  One of these actions breach the rules of the help of the project manager?

  It may be useful to note also that I have not yet created a table of contents for this project

  A note more: luckily I had a backup of the project. I opened the project and after that I made the following changes, the project has been altered:

  1. In the project manager, created a new folder
  2. for a topic in a different folder, right click on the heading and choose Properties. Renamed 'title of the topic '. A revised the text 'keyword '. Add an index entry.
  3. Moved the topic to the new folder
  4. Out of Robohelp

  Which option is not permitted?

  They are all allowed. If your project is always damaged, try to remove the file from .cpd and reopen the project.

• With the help of British Colombia as a project management system

  Hi guys,.

  I am new to BusinessCatalyst, I have subscribed to the online marketing package and created my first website. I am including several features on the site, including a private forum and several forms to submit the data. I would also like to have a private area to manage projects between the members of the site. This could have outages task, assigning tasks specific to different members and due dates % completed data, ideally, there should be a system of documents where the work can be saved and linked to the special page. I just need some advice on whether or not this is possible using catalyst for business or if I have to use external software.

  Kind regards

  Ransom of Mitchell

  Since BC cannot you access or code server-side run the database directly, I don't see how to do it at the end of BC. That said, you can watch the different project management solutions out there and maybe customize so that it matches the look and feel of your site of BC. I'm sure that redmine allows this. Check it out at http://www.redmine.org/. Depending on the level of customization you need you will need to learn some Ruby on Rails.

  See you soon,.

  -mario

• Custom development of modules CompactRIO - Embedded window of "missing" project manager

  Hello!

  The scenario:

  I am currently working on a custom CompactRIO Module. The material is made for the most part, I installed CompactRIO MDK 1.0 and I want to configure my CompactRIO system and develop the driver VI for my module.

  The steps required to configure the cRIO system before you start developing the pilot VI is the following (as mentioned in the documentation of MDK):

  1. launch LabView and select as an execution target FPGA devices. The Embedded project manager window will appear.

  2. Select the file-> New and create a project (LEP) LabView Embedded file.

  3. ...

  Used equipment:

  -LabView 2011, a Student Edition license

  -LabView FPGA and real-time modules

  -NIRIO 4.0

  OR-CRIO9024 controller with 8-slot chassis

  The problem:

  After the launch of LabView and selecting FPGA as a target (see figure), even by pressing the "Go" button next to the slide in the menu window of Embedded project manager will not appear.

  I also tried searching in other menus, without success.

  Issues related to the:

  1. where can I find the Embedded project manager?

  2 is it possible, that I can't find the window of Embedded project manager because I have a student licensed LabView?

  3. How can I create a LEP file in this case?

  4. can I use (and if so, how?) the option "create a pilot instrument? (see the attached figure)

  Waiting for answers,

  Levi

  Hello!

  After some research, I managed to create the link between my custom cRIO module and LabView.

  The complete solution (with LabView 2011):

  -Add the line "cRIO_FavoriteBrand = generic ' in the file LabView.INI"

  -Launch LabView

  -creation of a vacuum of the project and select FPGA execution target, click OK

  -Select 'CompactRIO Reconfigurable Embedded System' as the project type, click Next

  -the next step is the detection of the chassis / modules, followed by the creation of the new FPGA project

  -Add the custom module: click right on the target FPGA-> New-> C Series-> new target Modules or peripheral-> series C Module-> OK

  -Enter the name, select 'generic' module type, enter the location

  Hope it helps someone someday.

  Levi

• Need to best Microsoft Project management tool

  Hello

  Please guide if Microsoft Project Professional 2016 have the following characteristics:

  1. define the meeting calendar
  2. define the project (Star Date, end Date, customer information, etc.)
  3 create resources
  4. create the WBS (task with attributes such as start date, date end, dependencies, resource, real, late start date, % completion etc..)
  5 assign resources
  6. Enter the actual data
  7. maintain the level of reference
  8. apply a level resources
  9. set on resources
  10. generate various view (Gantt chart, showing resources etc.)
  11 generate reports
  12. agile project management

  13 can be consulted online

  Please help me to get the trial version of the same.

  Concerning

  Gaurav Suryan

  Hello

  Your question is beyond the scope of this community.

  Please repost your question in the Forums of TechNet project.

  https://social.technet.Microsoft.com/forums/ProjectServer/en-us/home?category=project

  See you soon.

• Integration with multiple processors

  Hello, how one would say a CallManager and an Avaya 8700? Is there a limit to how many PBX / processors, the unit can integrate to? Thank you

  Although two voice systems can be directly connected, and Yes you assign ports 1-12 x 13-24 to Y.

  I guess you could directly connect the 2 call manager clusters, then QSIG on in the Avaya s8700.

  I personally directly connecting the s8700 (via integration PIMG) and the Manager of a call to unity. Then network other cisco call manager as well as one that is connected to the unit (use Qsig or however,'s done it with callmanager) I recommend this is because I did it, and it minimizes the finger pointing to qsig between avaya and cisco.

• Integration with the PIX IDS firewall

  I read the Release Notes for Cisco Intrusion Detection System Sensor Version 3.0 S4 (1), and tripped on the new features of this version it pretends the integration with the PIX firewall

  How do implement you this? What kind of integration offer?

  Instructions for the sensor and the basic configuration of PIX can be found here:

  http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/csids/csids8/13870_01.htm#xtocid23

  Instructions for sensor and PIX SSH configuration can be found here:

  http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/csids/csids8/13870_01.htm#xtocid16

  You can configure the sensor to connect to the PIX via telnet when

  using the PIX inside interface, otherwise you have to use SSH.

  SSH with 3des encryption is supported in version 3.0 or later

  sensors for connections of PIX.

  Warning: If you use telnet with a version 6.2.1 or PIX more late or if

  you want to use SSH with encryption on any PIX, so you

  need a patch for your sensor. If so, open a case of TAC and demand

  the latest version of nr.managed engineering. Reference

  [email protected] / * / for any question.