SX 20 integration with VCS

Similar Questions

• Integration of Lync with VCS - key Option mandatory?

  We implement integration with VCS on x7.2 lync.  Using B2BUA with lync 2010.  Everything works internally with lync configuration, we are only having trouble with lync external participants come and we border routers in the mix.  Direct pools are set up under the name of trust.  We have turned on the highway of the tower.  The calls started from inward of Lync.  VCS sees calls says it is connected, but the appeal does not and then falls normal call clearing.

  My thought for the failure, is that the OCS Collaboration option key has not been added.  But I can't tell in the deployment guide, if this key is necessary only if the encryption is in progress.

  The other area that we now have on the border routers is if The Edge server and the firewall that the Edge transport server may move multimedia traffic through can then reconfigure to allow RTP over UDP and RTP over TCP to pass.

  Can you confirm if the key of the SCO is a requirement for Lync which crosses the highway?  And are there other areas which we recommend why calls set entirely outdoors.

  Hi Kim,

  the SCO cooperation improved option key is necessary for this scenario of appeal, stated at pages 13 and 53 in the Lync to X7.2 deployment guide:

  Calls on a Microsoft Edge server require the VCS have installed improved OCS Collaboration option key because this key allows the ICE to be used for media connectivity

  You are also right that you will need to allow RTP UDP traffic to and from your Edge transport server, as the TURN server on VCS Highway currently does not support the RTP over TCP. If this isn't the case, ice connectivity check between the B2BUA and the Lync client and server Edge fails, which in turn causes to disconnect.

  Hope this helps,

  Andreas

• TP Conductor2.2 integration with VCS8.0?

  Hello

  1 can ver8.0 VCS - C directly integrated with TP Conductor2.2 (via SIP Trunk/SIP)?

  VCS-C 8.0---(Trunk SIP) -TP Conductor2.2

  2 or is that VCS8.0 is still supported by Conductor2.2 TP and is integrated via SIP Trunk with CUCM?

  VCS-C 8.0-(Trunk SIP) -CUCM8.6/9.x---(SIP Trunk)-TP Conductor2.2

  Thank you

  Sumit

  Hi Sumit,

  VCS can be integrated with the conductor xc2.2 on the previous version, also in B2BUA mode.  This same model is also valid for worm x8.0.

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/conductor/config_guide/Cisco_TelePresence_Conductor_with_Cisco_VCS_B2BUA_Deployment_Guide_XC2-2.PDF

  check above link for more details

  Thank you

  Alok

• Integration with 50G

  Hello!

  Well, when I tried to compute the definite integral of | Sin x | I received the message cannot find the signin [0, 2 ft].

  

  I went in RPN mode, and this error persists. I then used [RS] [ENTER] to get the numeric result, and after awhile, I got the correct answer 4. But I can't get the answer simplely by clicking [EVAL].

  I also tried to calculate the antiderivative, and the correct answer returned Calculator -cos (x) * sign (sin (x)). I was wondering why the calculator produces an error when they apply for an accurate result (not digital, without .).

  Jack

  confirming the latest set of equations:

  

  EVAL would be = - 1

  and -> limit X PI - 0 = 1

  and the limit X-> PI = cannot determine.

  So, there's a singularity...

  Unfortunately, because of the resolution of the screen of 50 G, when the resulting equation for the indefinite integral is drawn, clear breaks in the plot IP and 2 * PI are not 100% clear.

  However, the subsequent calculations confirm that they exist.

  This is what has been shown that when the original integral from 0 to 2PI of | Sin (x) | is calculated,

  It is clear that the 50G automatically sets ON RIGOUREUX, even if it is not enabled in the (likely due to the function absolute value in the equation) indicators.

  THE rigorous is perfectly reasonably expect when the EXACT mode is selected with a function of absolute value.

  now for a pencil and paper method:

  | Sin (x) | is sin(x) from 0 to PI

  | Sin (x) | is - sin (x) IP to 2PI

  so...

  integral from 0 to 2PI of | Sin (x) | can also be expressed in

  integral from 0 to PI of Sin (x)

  +

  integral of the AP to 2PI of-sin (x)

  

  in EXACT MODE (strict mode setting is more questions)

  When EVAL would be = 4.

  I can refer you to a message done previously by Bernard Parisse (one of the developers of CASE).   Bernard said that the CASE cannot intercept all EXACT integration singularities (but it report some).

  Regarding the digital approximation method (help-> NUM) to get the result... I can't offer no answer as to the reason that the singularity is resolved.

  I've never seen a single post indicating what type of digital approximation algorithms are used for approximate integration with the 50G.  Of course, the digital approximation algorithms are distinguished by exact calculations.

  Finally, FYI, here is another good example of the use of 50G with an integral and having to use a bit of paper and pencil methodology (in this case, the method of cauchy principal value) to solve the 50G of the singularity.

  /T5/calculators/50g-numerical-integration-with-singularities/m-p/5678169#M11440

• Is there a work around to show the Site identity button when the integration with facebook like/send etc. It disappears when it comes to the page, it's because of the iframe can be done if anything.

  Is there a work around to show the Site identity button when the integration with facebook like/send etc. It disappears when it comes to the page, it's because of the iframe

  What can be done if anything.

  Pages that use "mixed content" (parts of the use of the HTTP page and some use HTTPS) are not secure against tampering, they will not display the site identity button. To resolve this problem, make sure that external resources you are incorporation are available over HTTPS and you use HTTPS to nest them.

  For example, to iframe widgets like the Facebook 'Like' buttons, make sure that your iframe use src = "https://192.168.1.20 /...". »

  See also discussion here: http://stackoverflow.com/questions/3587021/facebook-like-button-breaks-https-ssl

• CRM integrated with MS Project Management

  Hi Expert,

  On the CRM integrated with MS Project Management, there any company always do this?

  In fact, there are only certain configurations or it's really complicated customization?

  The result of the integration is really effective and efficient?

  Can share with me the practice of MS Project to the planning of resources management?

  Thank you!

  Hello

  The question you posted would be bettersuited in the TechNet Forums. I would recommend posting your query in the TechNetForums for more assistance:

  http://social.technet.Microsoft.com/forums/da-DK/projectserver2010general/threads

• While freeing up disk space, I accidentally deleted MSOffice, which is integrated with my HP 1000

  While freeing up disk space, I accidentally deleted MS Office which is integrated with my laptop HP 1000. How to restore my MS Office 2010 Starter? HP predict that if the product is still in warranty period?

  I tried restoring the setting factory but without any real help. Please help me!

  Kind regards

  Ron

  Once Office Starter is removed there is no way to reinstall. Even make a system back to factory settings recovery will not reinstall it.

• Replacement of 6000 MXP Integrator with unique display. C40 SX20 vs?

  I have to make a quick decision and my CISCO sales representative is MIA :(

  We have a bunch of 6000 s MXP (package ingegrator), I would like to replace. They are simple installations with a single monitor on a roll integer grid.

  with output to the screen and a camera is there any point to spend the extra money for a C40 vs getting a SX20? From a point of view video capability they look pretty well. C40 more things gets me in the back, but it is a pretty simple setup.

  Just looking for what people here could do?

  Thank you!

  Although C40 and SX20 are two different solutions for videoconferencing from Cisco, an integrator (c40) and other is fast setting solution (SX20).

  The SX20 Quick Set is designed to provide multi-party and Conference video to high definition with the flexibility to adapt to various configurations - all at a value price and size of the room.

  C40 is for Integrator supports for integration with 3 party like crestron devices, mixers.

  two take in charge the premium 1080 p solution.

  both are excellent solutions and are mind blowing in the feature and the feature as compare to the MXP series.

  You can't go wrong with either.

• Integration with the PIX IDS firewall

  I read the Release Notes for Cisco Intrusion Detection System Sensor Version 3.0 S4 (1), and tripped on the new features of this version it pretends the integration with the PIX firewall

  How do implement you this? What kind of integration offer?

  Instructions for the sensor and the basic configuration of PIX can be found here:

  http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/csids/csids8/13870_01.htm#xtocid23

  Instructions for sensor and PIX SSH configuration can be found here:

  http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/csids/csids8/13870_01.htm#xtocid16

  You can configure the sensor to connect to the PIX via telnet when

  using the PIX inside interface, otherwise you have to use SSH.

  SSH with 3des encryption is supported in version 3.0 or later

  sensors for connections of PIX.

  Warning: If you use telnet with a version 6.2.1 or PIX more late or if

  you want to use SSH with encryption on any PIX, so you

  need a patch for your sensor. If so, open a case of TAC and demand

  the latest version of nr.managed engineering. Reference

  [email protected] / * / for any question.

• ACS integration with Microsoft Active Directory Services

  Hi all

  I was responsible for developing the integration of GBA with MS AD. What I want to know is below assuming I have a software ACS or ACS device and the authentication protocol's RADIUS

  -What is the criterion of the announcement to integrate with ACS to device software

  -Should that AD hosted on the domain controller or not?

  -Otherwise, on what (DC, tree, forest, branch, flower, Fruit) the announcement must be hosted on?

  -What should I do to authenticate users logging into Cisco ACS Security Manager integrated with AD?

  -Are there other dependencies that I'll have to speak categorically in my description?

  Thank you

  Rishi

  First of all, I love the flower fruit one keep it up.

  If ACS is for windows, it can be installed on the domain controller or member server. For detailed information about installation tasks post must have full integration, please see the following link that contains fancy things you are looking for:

  http://www.Cisco.com/en/us/partner/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/installation/guide/Windows/postin.html#wp1041202

  If ACS is soultion engine then you need piece of software called remote agent to be installed either on the domain controller or member server, also check the following link for more details on how to integrate it with AD:

  http://www.Cisco.com/en/us/partner/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2/installation/guide/remote_agent/Rawi.html

  I hope this was informative for you.

  -----------------------------------------------------------------------------

  Please ensure good answers to rate

• With VCS-E media stream, VCS - C

  Hello

  We intend to implement a VCS infrastructure now I'm not sure wich accepting media between endpoints.

  On the photo, you could see the scenario.

  Endpoint 1 is communicate with the endpoint 2.

  1 medium Wich takes the media stream?

  2 what endpoint 1 communicate (media) with VCS - C and not directly with the two end point?

  2. must a direct connection between two end points?

  Thank you

  Martin

  Hi Martin,

  the media could pass control of VCS and highway always in a solution of course and course usage license.

  endpoint 1 must send to the control of VCS, and then it will be passed to the fast lane and then on internet and internet endpoint not directly.

  Rgds,

  Alok

• CUCM 8.6 & integration StarterPack VCS Expresway

  Dear Experts (Quebec),

  I need know weather its possible to integrate 8.6 VCSE Starterpack CUCM 7.1. ? kindly, let me know if have a workaround configuration to do this.

  Thanks in advance...

  Kind regards

  RFID

  Please see the deployment here guide-

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/VCs/config_guide/Cisco_VCS_and_CUCM_Deployment_Guide_CUCM_6-1_7_8_and_X7-1.PDF

  He talks of control VCS, but this should also be possible with VCS Starter Pack. Just note, CUCM doesn't have the same crossing of firewall capabilities you would get between control of VCS and VCS Expressway (or VCSe Starter Pack) so you'll need CUCM on same network as Starter Pack or open ports in the firewall for the signaling and media.

  Thank you

  Guy

• Multi-party sharing with VCS

  Hi, looking for some clarification.

  Can I use the multiparty licensing shared if I have a VCS rather than CUCM for call control?

  The ordering guide indicates that it would cooperate with the VCS.

  http://www.Cisco.com/c/dam/en/us/solutions/collateral/collaboration/PERV...

  page 4 - notes: although Cisco UWL Pro applies only to the Cisco Unified Communications Manager based deployments, SMP can be used with Cisco Unified Communications Manager and Cisco telepresence video Communication Server (VCS).

  The CUCM deployment guide

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/infrastructure/con...

  said only CUCM, not VCS - page 99.

  thoughts?

  Multi-party sharing (SMP) licenses can be used with VCS, the licenses that are managed by the Chief and not CUCM, unlike multi-party staff (PMP).

• BI publisher integrated with OBIEE?

  Dear Experts,

  
  

  
  

  
  

  oracle.xdo.servlet.security.AdminUser cannot be cast to oracle.xdo.servlet.security.DirectoryUser

  
  

  BI publisher integrated with OBIEE, but I use security as a guarantee of Bi Publisher.

  I created a role in the bi Publisher and trying to assign the report, but it shows the above mentioned error.

  Can use us the Editor while only integrated with OBIEE bi security?

  
  

  Thanks in advance!

  
  

  
  

  
  

  
  

  Hello Vinay,

  You can't use template security BI Publisher when the BEEP is integrated with OBIEE. You must use the Oracle Fusion Middleware security model in this case because OBIEE manages access. Security model BI Publisher can be used when you use a Simple installation, no installation of the company. To create the roles when you use Oracle Fusion Middleware I recommend you follow our manual steps: http://docs.oracle.com/cd/E28280_01/bi.1111/e22255/config_sec.htm#BIPAD132

  BR,

  Liviu

• Serving AVDF 12.1.2 integrated with the package DBMS_AUDIT_MGMT allowing the automation of audit records

  I have a question about this part of the vault of the audit and the Guide Release 12.1.2 database firewall administrator documentation:

  -Start quote-

  Schedule for a job of automatic Purge

  Oracle AVDF is integrated with the DBMS_AUDIT_MGMT package on an Oracle database. This integration automates the purge of the AUD $ audit records and files of $ FGA_LOG and operating system .aud and .xml files after that that they have been properly applied in the repository of Audit Vault Server.

  Once the complete purge, officer of Vault automatically sets a timestamp on the audit data that has been collected. Therefore, you must set the property USE_LAST_ARCH_TIMESTAMP set to true to ensure that the right set of audit records are purged. You don't need to manually set a work of purge interval.

  -Extract-

  According to the documentation above, how AVDF brings integration resulting in automation?

  Hello

  When you configure an audit trail in the AV server, say a table AUD$ path, once it collects the audit data he attributes automatically the last time stamp archive on the secure target database (you can check it out of view DBA_AUDIT_MGMT_LAST_ARCH_TS).

  However, the trail (or the AV itself server) does not purge that verification data already collected.

  You have to clean these data with the DBMS_AUDIT_MGMT. Procedure CLEAN_AUDIT_TRAIL, example for AUD$ table only:

  BEGIN

  DBMS_AUDIT_MGMT. () CLEAN_AUDIT_TRAIL

  audit_trail_type-online DBMS_AUDIT_MGMT. AUDIT_TRAIL_AUD_STD,

  use_last_arch_timestamp => TRUE);

  END;

  /

  You can simply run this procedure via a job depending on how often you want to cleanup audit and what time recordings. You don't need to worry about the timestamp of last archive.