Integrator WebAID did not show

Similar Questions

• After update of the iCloud contacts, these contacts did not show in iPhone, why?

  After update of the iCloud contacts, these contacts did not show in iPhone, why?

  The contacts are correct to iCloud.com?

  Try the settings/iCloud and remove the synchronization. Wait a few minutes and then resynchronize.

  Have you tried the signature to iCloud and then reconnect?

• in my printer, I fill ink but when check here see the ink did not show anything

  so last week my printer working correctly and there see the ink low level. so, I refill the ink. so, when I saw the ink level, it did not show anything. the ink was no more.

  Hi Raghini,

  What is the brand and model of the printer?

  If you facing problems with the ink level, you could get in touch with the manufacturer of the printer to get the replaced cartridge or for further assistance on this issue.

  For more information, see the article:

  Check on a printer ink levels

• my system sounds for usb connected but it did not show in Explorer...

  so whenever I connect my USB to the system, it looks like it is plugged. It says unable to install the drivers and does not show in Explorer.

  Previously, I also had the same problem, but restore the system helped me. but now I can't find the restore point, with which I have already restored. I tried other restore points but they could not help. Help, please

  PS. I tried options like uninstalling and reinstalling the drivers from the Device Manager.

  Hi Suraj,

  Thanks for posting your query in Microsoft Community Forum.

  1. You get an error message when your pen-USB is not recognized? If YES, what is the exact and complete error message that you receive?
  2. You did any significant hardware or the software goes to the computer after you fix the problem with the system restore?
  3. The drivers have tried to reinstall?

  I understand that the USB device is not detected by your computer. The question may arise if the currently loaded USB driver has become unstable or damaged or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  If the device fails after updating the driver, you can try to roll back the driver with its previous version.

  Restore a driver with its previous version

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Garritan Personal Orchestra 4 did not show any LPX

  After the installation of the Garritan Personal Orchestra 4 Aria Player (1846 v) in Logic Pro X (10.2.0), the

  Aria Player shows any logic (Manager plug-in or Instrument of into the slots of the Instrument).

  The PS4 indicating correctly in the folder Library/Audio/Plug-ins and then supposed to show in logic.

  The PS4 is 64-bit. Try, uninstall, download new re - install, everything is ok every time but never see the place

  in the logic. Any idea? Thank you.

  Garritan support is great, but they are as confused as me.

  Did you try to go in the AU Manager and reset/analyze again this plugin?

• Director of Windows 2.6 did not show my photos

  Im doing a project on the history and when I open windows movie maker 2.6 it shows only a big X where images must be visible. I'm saving my video on a USB key and working on different computers. What is a reason that they will not appear? Please help im really lost.

  Im doing a project on the history and when I open windows movie maker 2.6 it shows only a big X where images must be visible. I'm saving my video on a USB key and working on different computers. What is a reason that they will not appear? Please help im really lost.

  ========================================
  Movie Maker does not archive copies of the source files
  (photos, video clips, audio clips, etc.) Director must
  access the files from the original location.

  When you see the red Xs it means that a Movie Maker
  lost the path to the source files. If you right-click the
  Red Xs, you should be able to navigate to the current location
  source files and restore the path.

  It is always preferable that copies of all source files are saved
  you use to create the hard disk of the system
  your Movie Maker project.

• In Skype small circle next to contacts did not show online

  Original title:

  Skype

  Using Skype to IM a friend and I've noticed in my contacts list, the small circle beside it is name was not showng online, but it has been. I've updated my Skype, but it didn't. Could be the problem?

  Hello

  You will find the best support for your problem in the Skype community:

  http://support.Microsoft.com/kb/2629803/en-us

  Skype support please connect directly with Skype to receive assistance on their excellent products and services.

  Skype: http://skype.com

           
  Skype Support site: https://support.skype.com
           
  Skype support network: http://community.skype.com

  See you soon.

• key effect sixteen point garbage did not show on my first pro cc

  help me guys, my key effect of sixteen point garbage does not apear form my key on first cc pro effect

  They took the first CC 2015 caches by saying that the new masking ability is more flexible.

  I paste the link to a subject of the same subject Re: why the cache went to CC 2015?

  There are many sons of the same question.

  I understand that you are able to get the CC mattes 2014 save as presets and re-import the PP CC 2015. And I also think that there is another method, like the masts files copy / paste, but not sure on this one.

  I paste an another link here If you want your rear caches...

• success of process message did not show

  Hello
  All the
  I have a process called "process" page which is "On submit - after calculations" and Validations with the look of PL/SQL codes such as:
  
  < pre class = "jive-pre" >
  
  
  DECLARE
  
  v_blob_data BLOB;
  
  v_blob_len NUMBER;
  -v_blob_len NUMBER: = DBMS_LOB. LOBMAXSIZE;
  V_POSITION NUMBER;
  
  v_raw_chunk RAW (10000);
  
  v_char char (1);
  
  number of c_chunk_len: = 1;
  
  v_line VARCHAR2 (32767): = NULL;
  
  v_data_array wwv_flow_global.vc_arr2;
  
  number of v_rows;
  
  number of v_sr_no: = 1;
  
  BEGIN
  
  -delete from data_upld;
  
  -Read data from wwv_flow_files </span >
  
  / * Select blob_content from v_blob_data
  
  of wwv_flow_files
  
  where last_updated = (select max (last_updated) in the wwv_flow_files where UPDATED_BY =: APP_USER)
  
  and id = (select max (id) in the wwv_flow_files where updated_by =: APP_USER); */
  Select blob_content from v_blob_data
  from wwv_flow_file_objects$
  where id = (select max (id) from wwv_flow_file_objects$);
  v_blob_len: = dbms_lob.getlength (v_blob_data);
  
  V_POSITION: = 1;
  
  -Read and convert the binary for char </span >
  
  WHILE (v_position < = v_blob_len) LOOP
  
  v_raw_chunk: = dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
  
  v_char: = chr (hex_to_decimal (rawtohex (v_raw_chunk)));
  v_line: = REPLACE (v_line, CHR (10),': ');
  
  -v_line: = substr (v_line, 1, length (v_line)-2);
  
  v_line: = v_line | v_char;
  
  V_POSITION: = v_position + c_chunk_len;
  
  -When a whole line is retrieved < / span >
  
  IF v_char = Chr (10) THEN
  
  -Convert comma to: to use wwv_flow_utilities </span >
  
  v_line: = REPLACE (v_line, ', ' :'); ")
  
  -Converting each column separated by: in the data table </span >
  
  v_data_array: = apex_util.string_to_table (v_line);
  
  -Insert data into the table target </span >
  
  EXECUTE IMMEDIATE ' insert into DATA_UPLD (SR_NO, CODE_ID, CODE_CTGY, CTGY_NAME, CTGY_DESC, nom_element, ITEM_DESC, ACTUL_COST, DIS_PER, SCHM_ID, ITEM_UNIT)
  
  "values (: 1,: 2,: 3: 4:5:6,: 7,: 8,: 9,: 10:11).
  
  USING
  v_sr_no,
  v_data_array (1),
  TO_NUMBER (v_data_array (2)).
  v_data_array (3),
  v_data_array (4),
  v_data_array (5),
  v_data_array (6),
  TO_NUMBER (v_data_array (7)).
  TO_NUMBER (v_data_array (8)).
  TO_NUMBER (v_data_array (9)).
  v_data_array (10);
  -Remove
  
  v_line: = NULL;
  
  v_sr_no: = v_sr_no + 1;
  END IF;
  END LOOP;
  END;
  < / pre >
  
  in the success of the process of entering Message i
  
  < pre class = "jive-pre" >
  
  #MRI_COUNT # | "& P1_MSG. »
  
  < / pre >
  
  P1_MSG is an element hidden with the default value: Insert success
  
  But no messages show what argued the success of the process
  
  Can you help me?
  
  Saven

  Hello

  Ah, sorry.
  You loop here and you always insert just one line.
  Just increase variable in loop and then the value point.

  DECLARE
    v_blob_data BLOB;
    v_blob_len NUMBER; --v_blob_len NUMBER:= DBMS_LOB.LOBMAXSIZE;
    v_position NUMBER;
    v_raw_chunk RAW(10000);
    v_char      CHAR(1);
    c_chunk_len NUMBER           := 1;
    v_line      VARCHAR2 (32767) := NULL;
    v_data_array wwv_flow_global.vc_arr2;
    v_rows  NUMBER;
    v_sr_no NUMBER := 1;
  
    l_loop_count  NUMBER;
  BEGIN
    -- delete from data_upld;
    -- Read data from wwv_flow_files
    /* select blob_content into v_blob_data from wwv_flow_files where last_updated = (select max(last_updated) from wwv_flow_files where UPDATED_BY = :APP_USER) and id = (select max(id) from wwv_flow_files where updated_by = :APP_USER); */
  
    l_loop_count := 0;
  
    SELECT blob_content
    INTO v_blob_data
    FROM wwv_flow_file_objects$
    WHERE id=
      (SELECT MAX(id) FROM wwv_flow_file_objects$
      );
    v_blob_len := dbms_lob.getlength(v_blob_data);
    v_position := 1;
    -- Read and convert binary to char
    WHILE ( v_position <= v_blob_len )
    LOOP
      v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
      v_char      := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
      v_line      := REPLACE(v_line, CHR(10),':');
      --v_line := substr(v_line, 1, length(v_line)-2);
      v_line     := v_line || v_char;
      v_position := v_position + c_chunk_len;
      -- When a whole line is retrieved 
      IF v_char = CHR(10) THEN
        -- Convert comma to : to use wwv_flow_utilities
        v_line := REPLACE (v_line, ',', ':');
        -- Convert each column separated by : into array of data
        v_data_array := apex_util.string_to_table (v_line);
        -- Insert data into target table
        EXECUTE IMMEDIATE 'insert into DATA_UPLD (SR_NO, CODE_ID, CODE_CTGY, CTGY_NAME, CTGY_DESC, ITEM_NAME, ITEM_DESC, ACTUL_COST, DIS_PER,SCHM_ID, ITEM_UNIT) values (:1,:2,:3,:4,:5,:6,:7,:8,:9,:10,:11)' USING v_sr_no,
        v_data_array(1),
        to_number(v_data_array(2)),
        v_data_array(3),
        v_data_array(4),
        v_data_array(5),
        v_data_array(6),
        to_number(v_data_array(7)),
        to_number(v_data_array(8)),
        to_number(v_data_array(9)),
        v_data_array(10);
        -- Clear out
        v_line  := NULL;
        v_sr_no := v_sr_no + 1;
  
        l_loop_count := l_loop_count +1;
      END IF;
    END LOOP;
  
    :Px_YOUR_ITEM := l_loop_count;
  END; 
  

  Kind regards
  Jari

• toolbar keep hide and cannot reset it. I did not go into hiding. Right click on taskbar and it did not show the possibility of something else that close the tab etc.

  I changed the settings and the toolbar has begun to hide. There is now no tab bookmark with the help online and it said to click with the right button on the tab and it would give a pop-up menu to change the settings, but I tried and it gives only the option to close tabs etc..

  If the best bars slide upward and out of sight, but reappear when you move your mouse to the top of the screen, you may be full-screen mode. Press the F11 key to switch between normal mode and full-screen.

• Stop computer, Open firefox, did not restore session page

  I just installed something that apparently made Bing my homepage, and I don't have an option to restore session. Earlier, I registered normally, but no page appeared when I opened later. I wonder how to get back my last session at this point. The option 'Restore previous session' did not show up, so now I am just stumped. Does this mean that I will get the restore session if I register normally, because technically, it's not an accident?

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• Lifelog not showing steps

  Yesterday, when I started to the watch I had the window with how many steps I did and it looked like lifelog. Today my watched unloaded and exploded and when I loaded 100% I as well as measures did not show. I think it happened after 2 updates, but I didn't know until today after the execution. How to get the window to display in the home under the clock screen. I restarted the phone turned on and on the recorder on my phone ect. I can't find an application of lifelog on the watch so idk what to do...

  I managed to solve this problem! It wasn't the Lifelog application on sccren House, it was the app "adjustment". To be honest I don't know what I did. I uninstalled applications that measure steps ect (even good app) but on the watch, it still shows the app form BUT it shows on the homescreen somehow ~!

• My copy of photoshop is not showing in my purchased products...

  I just bought a copy of Photoshop CS5 and I'm trying to get the serial number for it. However, it is a copy of ESD and it did not show in my field of products purchased for 15 days now. Where can I find my serial number?

  Don't know what you're saying. Unless it's a volume license with an upgrade option below, everything you buy is current CS6. If you bought from someone else, you do so properly a

  Transfer an Adobe product license

  Mylenium

• Execute_query not showing - WORKING...-Message on Forms 10 g

  Hello
  
  
  There is a strange thing happening with our forms that have been migrated to 10g.
  
  (1) our keys are remapped to those used in the Version 6i. For example: CTL + L is F9
  
  (2) when a user press F7 and F8, Forms 6i, we get the message sequence:
  
  Enter a query; Press F8, CTRL + q to cancel
  then
  Work...
  
  and finally, we get the records.
  
  However, on form 10g, we have when a user press F7 and F8:
  Enter a query; Press F8, CTRL + q to cancel
  the - WORKING-message is not displayed and after a while, we get the records.
  
  There are no message_level before the enter_query or execute_query, and there is none: system.suppress_working in the form.
  
  What could be the problem?

  Steve,

  Set of tests I did did not show the message "Work"... "either.
  I think that this message is removed in 10g, that's why we have this small progress bar that keeps on moving left and right in the lower corner of the right side of the console window.

  I couldn't find any reference in the form Builder Online-Help on: System.Message_Working.

  Tony

• I removed my C drive files/programs to free up space, but disk defragmentation. does not show that I removed as much as I did. What now?

  I deleted my hard C drive files/programs to free up space, but disk defragmentation. does not show that I removed as much as I did.  What now?  THX.

  you could try to run own Manager;

  Click Start > run > cleanmgr.exe

  you could try deleting your temporary internet files.

  Close the browser, open internet options control panel and look for the option to detele the temporary files.

  either by the way, how big is the hard drive?