Intel S3210shlc Server got two integrated NICs, but ESX 3.5 shows only a single network adapter

Similar Questions

• In disk management, it shows only a single hard drive and it's C, but it lists the size than what my old drive was that I took out

  I got a new hard drive in my computer and the old a subscribed.  I then had to reinstall Windows XP Pro.  In disk management, it shows only a single hard drive and it's C, but it lists the size than what my old drive was that I took out.  The new shows of unallocated hard disk without a drive letter and has a black bar above it. How do I show my new hard drive that is 1 TB instead of one that was a 250 GB is not yet in my computer.

  Hi Reta,

  ·         The drive appears like 250 GB even if it's a terabyte?

  ·         Is the remaining 750Go showing as unallocated disk space?

  If this is the case, you can refer to this article on how to use disk management in Windows XP:

  How to use disk management to configure dynamic disks in Windows XP

  You can follow the directions to extend a Simple Volume so that your 250 GB turns into a single terabyte.

• Since El captain of loading, I can't open Photoshop & Lightroom 2015 CC all it gives an error of '1 '. Have reinstalled, vacuum cleaner used, but will not load showing only error

  Since the El Captain on MacPro 2.8 Ghz Tower loading, I can't open Photoshop and Lightroom 2015 CC all it gives an error of '1 '. Have reinstalled, vacuum used but still does not load only showing error '1' someone to solve?

  See you soon,.

  John Frost

  Error code 1: "unable to install". Creative Cloud Desktop: https://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html

  https://forums.Adobe.com/message/7533806

• I have files mp4 with 4 audio channels, but when I import it into the first it shows only a single channel

  I have the mp4 with 4 channel audio file that is not in the audio channel. When I import in the first it shows only 1 channel. In the project window, I try to find other audio channels on option audio channel (Edit-> audio channels) but it shows other channels. How active other audio channels and retrieve audio sound?

  When you go to interpret, I chose multichannel, then specified 4 tracks.

• Two tables have been targeted in sql but show only a single table top running pln

  Dear all,
  
  I captured in statspack following sql. There are two tables mentioned in the sql code. However, in the execution plan, it is alone. Grateful if you can help us with that. TQ.
  

                                                       CPU      Elapsd
    Buffer Gets    Executions  Gets per Exec  %Total Time (s)  Time (s) Hash Value
  --------------- ------------ -------------- ------ -------- --------- ----------
      448,047,663        3,738      119,862.9   95.5  1208.81   1387.07  998768410
  Module: java@myfabbus (TNS V1-V3)
  SELECT  QID, MID, MSG_STATE, MSG_STATE_WHEN  FROM mybus.MYIQ_myb
  us WHERE MID =   (SELECT MIN(Q.MID) FROM mybus.MYIQ_mybus Q, myb
  us.MYIM_mybus M    WHERE M.MSG_NAME = :1 AND M.MSG_VERSION = :2
  AND M.MID = Q.MID   AND Q.MSG_STATE = 0) AND MSG_STATE = 0

  Here's the updated sql shaped for ease of reading

  SELECT  QID, MID, MSG_STATE, MSG_STATE_WHEN  
  FROM mybus.MYIQ_mybus 
  WHERE MID =   (SELECT MIN(Q.MID) 
                    FROM mybus.MYIQ_mybus Q, 
                             mybus.MYIM_mybus M    
                        WHERE M.MSG_NAME = :1 
                        AND M.MSG_VERSION = :2
                        AND M.MID = Q.MID   
                        AND Q.MSG_STATE = 0) 
  AND MSG_STATE = 0

  Here's the sql for the query statspack report. Note that there is only one table (MYIQ_mybus) mentioned in the implementation plan.
  

  STATSPACK SQL report for Hash Value: 998768410  Module: java@myfabbus (TNS V1-V3)
  
  DB Name         DB Id    Instance     Inst Num Release     Cluster Host
  ------------ ----------- ------------ -------- ----------- ------- ------------
  MYBUSPRD      2074549195 MYBUSPRD            1 9.2.0.5.0   NO      mydm01
  
   Start Id     Start Time         End Id      End Time       Duration(mins)
  --------- ------------------- --------- ------------------- --------------
         41 13-Jan-10 08:32:14         42 13-Jan-10 09:02:15           30.02
  
  SQL Statistics
  ~~~~~~~~~~~~~~
  -> CPU and Elapsed Time are in seconds (s) for Statement Total and in
     milliseconds (ms) for Per Execute
                                                         % Snap
                       Statement Total      Per Execute   Total
                       ---------------  ---------------  ------
          Buffer Gets:     405,851,843        204,356.4   92.38
           Disk Reads:               0              0.0     .00
       Rows processed:           1,593              0.8
       CPU Time(s/ms):           1,069            538.4
   Elapsed Time(s/ms):           1,120            563.9
                Sorts:               0               .0
          Parse Calls:             121               .1
        Invalidations:               0
        Version count:               1
      Sharable Mem(K):              34
           Executions:           1,986
  
  SQL Text
  ~~~~~~~~
  SELECT  QID, MID, MSG_STATE, MSG_STATE_WHEN  FROM mybus.MYIQ_myb
  us WHERE MID =   (SELECT MIN(Q.MID) FROM mybus.MYIQ_mybus Q, myb
  us.MYIM_mybus M    WHERE M.MSG_NAME = :1 AND M.MSG_VERSION = :2
  AND M.MID = Q.MID   AND Q.MSG_STATE = 0) AND MSG_STATE = 0
  
  All Optimizer Plan(s) for this Hash Value
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  Shows all known Optimizer Plans for this Hash value, and the Snap Id's they
  were first found in the shared pool
  -> ordered by Snap Id
  
      Plan
   Hash Value  Snap Id        Cost Optimizer
  ------------ -------- ---------- --------------------
    4280385364        3         2  CHOOSE
  
  Plans in shared pool between Begin and End Snap Ids
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  Shows the Execution Plans found in the shared pool between the begin and end
  snapshots specified.  The values for Rows, Bytes and Cost shown below are those
  which existed at the time the first-ever snapshot captured this plan - these
  values often change over time, and so may not be indicative of current values
  -> Rows indicates Cardinality, PHV is Plan Hash Value
  -> ordered by Plan Hash Value
  
  --------------------------------------------------------------------------------
  | Operation                      | PHV/Object Name     |  Rows | Bytes|   Cost |
  --------------------------------------------------------------------------------
  |SELECT STATEMENT                |----- 4280385364 ----|       |      |      2 |
  |TABLE ACCESS BY INDEX ROWID     |MYIQ_MYBUS           |     1 |   26 |      2 |
  | INDEX UNIQUE SCAN              |MYIQ_MYBUS_I1        |     1 |      |      1 |
  --------------------------------------------------------------------------------
  
  End of Report

  Rgds
  Ung
  

• ESXi embedded for Intel modular server?

  Hello world

  Our new Intel modular server will happen in a week, and we install ESXi Server in this subject.  I love the benefits of security of the embedded server...  Anyone know if there is a version shipped for this server?

  Thank you

  Mike

  There is only a single modular server Intel that I can find in the HCL (http://www.vmware.com/resources/compatibility) and it only support ESXi Installable.  Featurewise, embedded and installable are the same - the only difference being that installable requires a local HD to install to (but you can hack to run from a USB flash drive.

• only a single NIC on esxi

  I have found that a single network adapter on esx and when I can't add another as this image can someone help me add another network card

  I found the solution

  the problem that I have added the ethernet with type (host or vmnet) .these two cases do not appear if you need added new virtual ethernet.

  the solution only add the NAT of ethernet type.

  Thanks for your effort

• Workstation Z200: missing driver for Integrated NIC - workstation Z200, FMB 0901 motherboard intel

  try to download the driver for the workstation Z200, but its not displayed option intel, broken download link. for windows 7 64 bit. No drivers or installation CD with this pc.

  'Not found '.

  The requested URL /pub/softpaq/sp52001-52500/sp52449.exe was not found on this server. »

  This model integrated network, not the other Broadcom option on PCIe card account.

  no idea why this is shown as an option, but not found as downloadable?  Thank you.

  Hi, @NigelH47 :

  HP is having major problems with the business PC support pages and many drivers are missing.

  HP is aware of the problem but has not given a deadline for the correction.

  The Z200 quickspecs state that your PC has the built-in controller Intel 82578 DM PCIe LoM.

  The only suggestion I can offer at this time would be to get the driver directly from Intel.

  The 64-bit driver is the 2nd on the left side of the page.

  https://Downloadcenter.Intel.com/download/18713/network-adapter-driver-for-Windows-7-

• Adding 2nd NIC killed ESX Server

  All,

  Thank you for taking the time to read my post. Here are the environment and then my question.

  3 - DELL R510 - Dual Core Quad - Intel systems

  The area has "2" Integrated NIC

  as well as "2" QUAD Port - PCI Intel network interface cards

  NIC 0 - integrated NETWORK card is a system where installed- and it is plugged into a standard Switch CISCO GIG, the tag VLAN 108

  NIC 1 - integrated is configured for iSCSI connectivity

  LOCATION 0 - Port Quad PCI NIC

  Port # 3 is connected to a GROUP of CIRCUITS on a CISCO SWITCH with VLAN 108, 104, 107 and 110 on it

  Port # 1 is used for the 2nd iSCSI connection

  LOCATION 1 - Port Quad PCI NIC

  # 7 port is connected to a different GROUP of CIRCUITS on a CISCO SWITCH with VLAN 108, 104, 107 and 110 on it

  All three servers are installed with ESX4 update 1

  When I go into vCenter to one of the three servers and go to the primary Switch virtual networking, if I add #3 NIC or Port #7 NIC to the virtual switch (it currently integrated NIC 0 in) the system disconnects the network and to connect to vCenter losses and the entire network. If physically I reboot the ESX Server, it is NOT on the network. I have the tag VLAN in NIC0 defined 4095 to accept all the VLANS as well. (I tried with and without the tag of VLAN 4095 - same result)

  Here are my questions:

  1 - Why is - what happens? How it should be configured?

  2. is there a way to get NIC0 to return to the network without having to re - install ESX?

  I reinstalled the boxes several times now and tried many variations of combinations of nic, and they all end up with the ESX Server disconnected from the network and does not.

  Really looking for some common sense here... Please and thank you.

  Hmmmm, shooting a little in the dark, but I think your next 2 steps are:

  (1) get the SC (vswif0) MAC and check your MAC address table switch to fly throughout of ports

  (2) on the console, use esxcfg-vswitch for uplink associated with the Group of port SC the first list, and then delete the 2nd network card.  This should get your SC direct return and leave the new map available NETWORK the vswitch, simply not group ports SC.  (And you don't have to reinstall :-).)

  Virtualization of happy!

  JP

  Please consider awarding points for correct or helpful answers

• How to manually configure the IP, subnet, gateway on the new NIC in ESX Server 3.5

  Hello, first let me say that I am relatively new on ESX Server and so the question I ask here may seem trivial but I looked through the documentation and other threads and that you have not found quite what I'm looking for.

  I have an ESX Server 3.5 with a number of production virtual machines running works very well.  I need to install a second NETWORK adapter because my use of the network will go through the roof, once I convert a production server used in a virtual machine on this machine.  I have a server Dell PE 2950 and I bought an Intel Pro/1000 PT dual port PCI-e adapter that is on the list of hardware supported.  In the reading I did, every reason to believe that when I set up the server, the new network cards will appear in the VIC where I can assign to a new Vswitch and so forth, so I get it.  What I don't see in the VIC is a way to specify the NETWORK adapter settings.

  The problem is that the switch I connect to, put in place by our network management staff, will not be DHCP settings of NETWORK card for me, I have to manually configure the IP, subnet and gateway until I can start talking.  When I initially installed ESX, I was able to provide all parameters of NETWORK card installation - which is not the case now with the new NETWORK card and the operating system all this up and running.  How do I do this?  Thanks for any help.

  ... BillH

  Adding another physical NETWORK card to your vSwitch will make this new Teddy to comply with policies of vSwitch.  In particular, the load balancing algorithm will determine how the additional bears will get used.  By default, this is done with switch port ID.  This means that each vm NIC that feeds, will choose the next available bear to talk about.  The virtual NIC will essentially be Robin and choose the next Teddy online to talk it through and will so remain like that until a failure condition occurs, or the virtual machine is restarted.

  If you know a particular VM is a high user of I/O, and you want to separate its traffic from the rest of your virtual machine, and then create a new portgroup on vSwitch0, assign this new portgroup 3rd Teddy and use the other two as before.  In addition, in your regular exchanges, remove or make sleep 3rd Teddy.  In this way you completely isolate the heavy vm from the rest of your systems.

  -KjB

  VMware vExpert 2009

• Intel WiFi Link 1000 bgn @ E220s: visible, but will not connect to access point

  Hello

  just got my new E220s - love it! Only problem is that I can see the wireless access points, but whenever I try to connect to them it says: "Windows could not connect to '.»»

  My setup is a Lenovo TinkPad E220s: Intel Core i5, Intel WiFi Link 1000 bgn, Bluetooth 3.0, 7200 RPM 320 GB HDD, 4 GB RAM, Windows7 Home Premium.

  My system is up to date with regard to the update of Windows and Lenovo BIOS update.

  * A tried to connect to a FritzBox 7141 (b, g, g ++ standards)

  * with WPA - PSK: entered the password-> problem as above

  encryption-> problem as above

  * Connection I tried with 'eduroam' (wifi popular education in the world)-> problem as above

  * Using the driver Lenovo 14.0.1-> problem as above

  * Manually install driver Intel 14.1.1.3-> problem as above

  'Manual Diagnostic tool' Intel:

  * test hardware: past

  * pilot: past

  * radio test: past

  * scan test: past

  * association test: failed

  * other tests: does not work

  Some diagnoses more Windows:

  Details about network adapter diagnosis: Network adapter Wireless Network Connection driver information: Description . . . . . . . . . . : Intel(R) WiFi Link 1000 BGN Manufacturer . . . . . . . . . : Intel Corporation Provider . . . . . . . . . . . : Intel Version . . . . . . . . . . . : 14.0.0.113 Inf File Name . . . . . . . . . : C:\Windows\INF\oem14.inf Inf File Date . . . . . . . . . : Tuesday, November 09, 2010 8:43:32 AM Section Name . . . . . . . . . : Install_MPCIEX_Lenovo_1000_HMC_BGN_WIN7_64 Hardware ID . . . . . . . . . . : pci\ven_8086&dev_0084&subsys_13158086 Instance Status Flags . . . . . : 0x180200a Device Manager Status Code . . : 0 IfType . . . . . . . . . . . . : 71 Physical Media Type . . . . . . : 9

  Hello

  Problem solved. Of wire antennas was not of all attached to the card and the other it has established relationships by chance. It took me 3/4 of an hour to turn off the battery, remove the keyboard, attach wires to the NIC (quite difficult due to lack of space) and put it all together. Then everything worked fine.

  Thanks for the help, forum!

  E220s rocks!

• Server fires two queries for grandtotal?

  I have a report and he adds some totals.
  
  I checked the queries in the monitor session before and after adding the total general.
  previously, only request was sent to the database server.
  but after adding totals, server sends two database queries and my performance report declined.
  
  Please suggest how to avoid this.

  Hello

  OBIEE wil always trigger a separate query for total. It is the expected behavior. You should look at other ways to improve the performance of the report as put by default filters so that OBIEE failed to prform sum huge data.

  Kind regards
  Sandeep

• I got an ipad 2, but after the ios 9.3.3 it does not load

  I got an ipad 2 but after that I updated ios 9.3.3 does not charge... What can I do?

  Let the iPad charge for at least half an hour and if it does not seem to be supported, see the following article for the troubleshooting steps. If your iPhone, iPad or iPod touch won't charge - Apple Support

  -AJ

• I had two apple ID, but only now have access to one of the e-mails. When I try to login, it differs on the account that I no longer have access to. How can I change my information to my * account?

  I had two apple ID, but only now have access to one of the e-mails. When I try to login, it differs on the account that I no longer have access to. How can I change my information to my * account?

  < email published by host >

  As you know that these are user forums, it is not a good idea to post your e-mail address on a public forum - I asked the host to remove it.

  What "information" do you want to go? You can transfer iTunes downloads to another account, or to merge accounts - all downloads are permanently associated with the account that has downloaded (if only this account can potentially re-download purchases, downloads of updates of its applications, authorize such purchases on iTunes from the computer, and make in-app purchases in them).

• my iphone 5 c got stolen and I tried to find on find my iphone, but it continues to show that my iphone is offline... How can I find my phone?

  my iphone 5 c got stolen and I tried to find on find my iphone, but it continues to show that my iphone is offline... How can I find my phone?

  What to do if your iOS device is turned off or offline?

  If your missing device is turned off or offline, you can still implement this Mode lost, lockor remote wipe. The next time your device is online, these measures will take effect. If you remove the device from your account while it is offline, pending actions for the device will be cancelled.

  If your iPhone, iPad or iPod touch is lost or stolen