Interactive report filter by clicking the cell in report

Similar Questions

• To edit a cell, Numbers Help said to double-click on the cell

  To change the contents of a cell, Numbers Help said double-click the cell to do the insertion point appears, then enter.

  I can double click on a cell, constantly, but rarely the insertion point appears.

  How can I make it work every time?

  Try adjusting the double-click speed in system preferences > accessibility:

  

  In general, I double click at a rate that is roughly 5 clicks per second. If you are double clicking too slow then numbers can interpret this as two simple clicks rather than a single double click event.

• The default value of the cell reference to preserve columns and lines in function number 3.6.1

  I use:

  3.6.1 the numbers

  OSX 10.11.1

  For clarity: afterwards, I use the term 'address of the cell' is the name of the Table, the numbers of row and column that is used to specify a particular cell. Please let me know if there is a name for this.

  Am new on numbers and you want to create a database with two tables whose most variables in "Table 2" are determined by entries in 'Table 1' and vice versa. I use the functions to set up these relationships; However, it is not an obvious geographic relationship between the output in table 2 cell address and the address of the entry in table 1 cell, so I want the address of the cell called in any default function to "Preserve line - True" and "Preserve column - True" still, but don't be found anywhere to set this parameter. Is this possible?

  Thank you in advance your help.

  All the best,

  RA

  It is possible that you are trying to do things with numbers for which it is not designed. It's really good at crunching numbers, but this isn't a database program. If you look at the models in file > New in your menu, you will find good examples of use of numbers. To enter formulas usually you don't have to make a lot of seizure of addresses. You type = activate the formula editor, and then click the cell you want to reference. Numbers then inserts the address for you.

  SG

• Editable interactive report. To change the list column dropdown type filter.

  Hi all, I thought I had posted this, but I can't find my post, so apologies if it turns up to twice more...

  XE SUMMIT 4.2 11.2

  Ive created an editable interactive report... Everything works very well, and I have several Text, LOV and selection list columns...

  However when I now click on a column header to filter, sort etc drop-down list is the same format as the column itself. So if for example, I have a text box, then the drop-down list is also text boxes, if the column is a column LOV, the filter drop-down list is a list of fields LOV. (Im assuming this is correct behavior, because it simply inherits the column parent..)   So, I would change the lists to a list of standard display so that they are in order and can be used...

  I think so? I know I have to do, which is either to substitute the function that generates the dropdown filter... or probably more simply, write a bit of JS/JQuery that modify data for drop-down lists.  Im still to learn, some help would be appreciated...

  I think so. (and please correct me if I'm talkiing... garbage)   I need to find each of the appearance of the DIV with the ID that corresponds to the drop-down list box, and then loop through each entry and change the structure...

  Currently the source for drop-down fields resembles the following (for a text field...). :

  < div id = "apexir_rollover_content" >

  < a href = "javascript:void (false); ">

  < input type = "text" value = "24489" maxlength = size "2000" = "6" name = 'f06' > < / input >

  < /a >

  < a href = "javascript:void (false); ">

  < input type = "text" value = "N1021" maxlength = "2000" size = "6" name = 'f06' > < / input >

  < /a >

  < / div >

  How could I 1) browse each occurrence of div id = "apexir_rollover_content" on my page, so I found out about each other, how would I go through the list and change the line above an input to a standard list item text...? Or is there a simpler way to do it?

  Kind regards

  Richard

  Hello

  Problem was on your process to GET the VALUES of LOV.

  You did not bind the variable values of cursor.

  I created another process for your page that manages LOV BUDGET_CAT

  Kind regards

  Jari

• link to an interactive report AND apply the filter for 2 items.

  Hi can you help me out here on how to create a link to an interactive report AND apply the filter for 2 items.

  Here is my code

  I have a list of table, clicking the selected item should link to interactive report and create the filter. Below the code does not work for a filter. can you help me what to do with 2 filters.

  A filter = > works very well

  sys. HTP.p ("< ul class =" uChartList"> ');

  sys. HTP.p ("< class li =" uNumber uGrid col_2 col_sart"> ');

  sys. HTP.p ("< a href =" "|") sys. HTF.escape_sc ('f? p ='|: APP_ID |': 0 0 :'||: APP_SESSION |':00:P00_XXX:000, RIR:IREQ_XXX:Test :') |) » » >') ;

  sys. HTP.p ("< class =" uValue"> ' | l_tester |) ("< / big >");

  sys. HTP.p ("< small class =" uLabel"> < /small > Tester ');

  sys. HTP.p ("< /a > '");

  sys. HTP.p ("< /li >" ");

  Scenario 2:

  Two filters = > does not

  sys. HTP.p ("< ul class =" uChartList"> ');

  sys. HTP.p ("< class li =" uNumber uGrid col_2 col_sart"> ');

  sys. HTP.p ("< a href =" "|") sys. HTF.escape_sc ('f? p ='|: APP_ID |': 0 0 :'||: APP_SESSION |':00:P00_XXX:000, RIR:IREQ_XXX:Test:P00_YYY:001:IRC_YYY:test2 :') |) » » >') ;

  sys. HTP.p ("< class =" uValue"> ' | l_tester |) ("< / big >");

  sys. HTP.p ("< small class =" uLabel"> < /small > Tester ');

  sys. HTP.p ("< /a > '");

  sys. HTP.p ("< /li >" ");

  Thanks in advance

  actually the syntax wrong values in the syntax of the passes to several elements.

  is

  f? p = 6000:6004: & APP_SESSION. : NO:6003:MY_ITEM1, MY_ITEM2, MY_ITEM3:1234, 5678

  Use above scenario and verification.

  Go

• Interactive reports - width of filter for the column title dialog

  Hello
  
  I have a question about interactive reports and filter functionality, you can use column headers in the apex 4.0.2.00.07.
  
  When I click on a column header in my interactive report, I will be presented with a list of possible filter values for this column. Unfortunately this filter dialogue seems to have a fixed width and be independent of the overall column width. Columns with entries of data any longer, I can't see the entire string.
  
  Is it possible to change the width of the dialog, for example the s.t. it automatically adapts to the width of the selected column? But it would be useful even if I could apply the same width for all columns in a report.
  
  Thank you very much
  Martin

  Hello

  Seems 20 theme page templates are missing doctype and IE use quirks mode.

  You can try to add to the header of the template page as the first line

  and see that it does not break anything.

  Kind regards
  Jari

• With the help of buttons to filter the interactive report

  I have an interactive relationship with a default filter set up. Now, I would like to have buttons to modify the SELECT statement used for the report. While I need not make a new page of interactive report for each button. I want to provide the user with a buttons show all reports, view reports on demand and completed report. Everyone will just filter the lines accordingly. What is the best way to achieve this?
  
  Thank you!

  Hello
  You can created a where clause clause in your IR as:
  Select...
  Of...
  where report_type like 'at the request of the reports' and: p1_button_value = 1
  or report_type like 'Finished reports' and: p1_button_value = 2
  or: p1_button_value = 3

  Now, you create your button and an element called: p1_button_value. Function of the key, you click on the value of your Exchange item. If you need display different columns, then go to the column and change the condition:
  : p1_button_value = 1

  It will be useful,

  Tobias
  ----------------
  http://Apex-at-work.blogspot.com/

• Filter column position of the interactive report

  Hi all!

  First of all, sorry my English.

  I have a problem with filters standart on the interactive report column heading. Version 4.0.2 APEX. It is interactive report based on the view. Nothing unusual - behavior and the default templates. I have also the region of filter on the page, and after user-press "apply" button my package variables to session state of filter. View used these values. It is worked and filtered interactive report. But when I try also to use the filters on the heading of the column that is nothing past. I have try the column type: report Standart column and display text. I have try the Filter Type column: by default based on the Type of column and the list defined by the use of... Contain. Nothing, as no filter exists at all. Filtering with worked as usual action buttons. I think that this problem in a SEPARATE implicit in this filter. I know that there are quantitative limitation of DISTINCT values with column header filter, but I have nothing in the filter. And even I have type the value and press ENTER, nothing happened. Columns with Date type is fine, but String and number does not.

  There is no work around? Thank you.

  Solved within "parameterized" view, remove and replace with SELECT with params.

• view an interactive report at the click of a button

  Hello

  I interactive reports in which I want to dynamically show on click of a button, I put a condition report on request = Expression 1 and in the Expression, I gave the name of the button, but the report does not show even when the button is clicked, or this isn't when the page loads.

  Any guidance will be of great help.

  Thank you

  Rakesh

  HI Rakesh,

  Rakesh119-Oracle wrote:

  Hello

  I interactive reports in which I want to dynamically show on click of a button, I put a condition report on request = Expression 1 and in the Expression, I gave the name of the button, but the report does not show even when the button is clicked, or this isn't when the page loads.

  Any guidance will be of great help.

  Thank you

  Rakesh

  In addition to this all you have done.

  Create a branch and redirect to the same page

  Branch point: on Submit (after Computation, valdation and processing)

  Target type: Page of this application.

  Page: same page where you have the report.

  Request: Button name (what you have given in expression1 in the condition of report)

  When button: click on the button that you want to view report

  Hope this helps you,

  Kind regards

  Jitendra

• Run interactive report only if the search filter values / entered.

  Hello

  I have an interactive report I want to post, but the problem is that too many files are in the base table, so I want to hide this report until some filter values are entered in the search field (apexir_SEARCH), so if no value entered search I do not show the report but with the search value view the report with the returned records ,

  
  

  I tried to create a hidden item (P1_TEST) USE THE CONDITION relating to THE report if P1_TEST IS NOT NULL, and then submit the report, but it does not work well enough

  
  

  Thank you

  Gor_Mahia wrote:

  I have an interactive report I want to post, but the problem is that too many files are in the base table, so I want to hide this report until some filter values are entered in the search field (apexir_SEARCH), so if no value entered search I do not show the report, but with the value of research showing the report with the returned records ,

  I tried to create a hidden item (P1_TEST) USE THE CONDITION relating to THE report if P1_TEST IS NOT NULL, and then submit the report, but it does not work well enough

  Add to the WHERE clause of the query of the IR (or add it in the WHERE clause if the report has not one):

  and exists (select
                  null
              from
                  apex_application_page_ir ir
                    join apex_application_page_ir_rpt irr
                      on ir.interactive_report_id = irr.interactive_report_id
                    join apex_application_page_ir_cond irc
                      on irc.report_id = irr.report_id
              where
                  ir.application_id = to_number(:app_id)
              and ir.page_id = to_number(:app_page_id)
              and ir.region_name = 'Conditional IR'
              and irc.condition_type in ('Filter', 'Search')
              and irr.session_id = :app_session
              and irr.base_report_id = (select apex_ir.get_last_viewed_report_id(to_number(:app_page_id), ir.region_id) from dual))
  

  The predicate will be true only if the user has created at least a filter/search condition for the report, and if it is false, that it must stop the optimizer to hit the base table. (This has been developed and tested on APEX 5.0, so there may be differences with previous versions.)

  Note that using the search field by default generates inefficient queries. If you are really serious about performance, clear the search field and get users to create filters to specific columns, which will have a better chance to allow the optimizer to use indexes or improve the execution plan.

• Lines no filter in the interactive report

  Hello everyone,

  Apex version:-4.2.4

  Interactive report

  Theme:-Builder blue 2

  I have two environment production and development

  There is a column of the code

  on development when I filter I am able to see the lines with

  code NA

  

  I am able to find the row of

  

  

  but on the production, it's not not showing lines with NA

  Note:-the data so that the lines are same

  so the query is exactly the same

  There is no condition in where that will impede the lines to be seen

  

  If no idea why is what happens please tell

  ReemaPuri wrote:

  I have two environment production and development

  There is a column of the code

  on development when I filter I am able to see the lines with

  code NA

  

  I am able to find the row of

  

  

  but on the production, it's not not showing lines with NA

  Note:-the data so that the lines are same

  so the query is exactly the same

  There is no condition in where that will impede the lines to be seen

  

  If no idea why is what happens please tell

  See Oracle Apex Interactive, information column header filter missing? Create a filter of LOV column in the column attributes, as described here.

• Filter delete automatically the interactive report

  Hello world

  We are seeing the question in the filter APEX. I applied the action filter-> filter. the filter is applied as expected. then we are navigate current page to another new page. When we return to the old filter page, we are not able to get the filter.

  For example: we have the "amount" column I applied a quantity of filter > filter 0 on page 1, then page 2 accessing we. When we return to page 1 we are not able to find the amount > 0 filter

  Let me know how to solve this problem.

  Kind regards

  Sushant

  Hi LnTInfotech,

  LnTInfotech wrote:

  Hi Sunil,

  Thanks for your information, but in my case, we do not save the default (primary) report. We have to got to page 1 to page 2 with any filter and return back to page 1 need to show the same filter.

  Kind regards

  Sushant

  Are you compensation/reactivate the interactive link (button, breadcrumb) report? Reference: a link to the interactive reports

  As clearing (CIR) /resetting (IRB) interactive report leads to clear the filters applied to the interactive report in the session active.

  Note: Filters / other attributes of the action menu applied to the interactive report are specific session, user may choose to save it as a saved report interactive and developer can choose to save as the main report.

  For more information about interactive reports see the Oracle APEX documentation and tutorials available on Oracle Learning Library like this:

  http://www.Oracle.com/WebFolder/technetwork/tutorials/OBE/DB/Apex/R40/apexirr/apexirradv/apexirradv_ll.htm

  I hope this helps!

  Kind regards

  Kiran

• How to increase the size of the field the Filter Expression in an interactive report.

  Hello

  My uses user field of the expression of the filter in the interactive reports with multiple values and want to visualice the contents of the field, is it possible?

  Thank you

  Do you know how to use jQuery?

  I'm looking at this as, this is what I have so far:

  I don't really like how it works yet, but looks like a direction to go.

  Although I currently use Apex 3.2.

• Paramerterized interactive reports - is there a quick fix to stop the query to run when the page is entered before user by clicking OK.

  Example of

  Currently, when the user enters the page interactive report runs (unless the user hitting ' go') and - does no data found because one "parameterized" field is required and the sql is not set to NULL values.

  I'm looking for a way to not run a query at all -until the user hits go for the first time on the page - each time that they re - enter the page in the same session, it would be OK to auto submit the query.

  I believe that I can install a hidden item and check on my interactive report E1 not null.  Then create a 'calculation' on 'after bid"that would set this value to a value - say 1.

  I can't seem to be able to get this to work however.

  In my interactive report - I wonder what 'type condition' should I use.  Any thoughts would be greatly appreciated.

  You have two regions, research and order Type. You have items in the two regions. However, I think you are talking about the area "Search" when you say 2 parameters.

  If you want to just display IR when the user clicks on 'Go' or click on 'Go' earlier in the same session, then I suggest,

  • Create a new item of the hidden page, P6_SHOW_IR
  • Create page process that runs when the user clicks on the button 'Go '. Here to update the value of P6_SHOW_IR 'Y '.
  • Create a branch that connects to the same page with "State of Session saving" checked (connections conditional, when click on the button "Go")
  • Set "Conditions" for the region of infrared, so it displays only when the value of the P6_SHOW_IR element is Y

  Kind regards

  Hari

• Paramerterized Interactive reports - when running or by clicking on a specific page, how can I stop the report from until the user enters the rendering parameters.

  I wasn't able to post a picture in this post

  But it could look like this

  Order type - ALL - (selection list) GO (button)

  When I enter this page - the report is rendered ALL the data because the SQL is as follows

  AND ol.unit_selling_price <>0
  AND(ordertype.transaction_type_id =:P1_TEXT OR:P1_TEXT IS NULL)
  ORDER BY 3

  Its installer in this way because I want that all returned records if the user makes no selection BUT click ON the 'GO' or 'SEARCH' button

  I have just not all records rendered as soon as the initial screen and user selection options... IE launch via a button.

  Thank you

  Create an item hidden on the page and a calculation allows you to set a value for the element that is hidden when the "GO" button is presented.

  Add a line to your SQL to verify that the item is not null:

  ...
  AND :P1_GO_FLAG IS NOT NULL
  ...
  

  Or better yet, if you have valuables parameters in another region define the condition in the area of interactive report to be when the value of the hidden item is not null.